aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-24target/arm: Remove ARCH macroPeter Maydell
The ARCH() macro was used a lot in the legacy decoder, but there are now just two uses of it left. Since a macro which expands out to a goto is liable to be confusing when reading code, replace the last two uses with a simple open-coded qeuivalent. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200803111849.13368-8-peter.maydell@linaro.org
2020-08-24target/arm: Convert T32 coprocessor insns to decodetreePeter Maydell
Convert the T32 coprocessor instructions to decodetree. As with the A32 conversion, this corrects an underdecoding where we did not check that MRRC/MCRR [24:21] were 0b0010 and so treated some kinds of LDC/STC and MRRC/MCRR rather than UNDEFing them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200803111849.13368-7-peter.maydell@linaro.org
2020-08-24target/arm: Do M-profile NOCP checks early and via decodetreePeter Maydell
For M-profile CPUs, the architecture specifies that the NOCP exception when a coprocessor is not present or disabled should cover the entire wide range of coprocessor-space encodings, and should take precedence over UNDEF exceptions. (This is the opposite of A-profile, where checking for a disabled FPU has to happen last.) Implement this with decodetree patterns that cover the specified ranges of the encoding space. There are a few instructions (VLLDM, VLSTM, and in v8.1 also VSCCLRM) which are in copro-space but must not be NOCP'd: these must be handled also in the new m-nocp.decode so they take precedence. This is a minor behaviour change: for unallocated insn patterns in the VFP area (cp=10,11) we will now NOCP rather than UNDEF when the FPU is disabled. As well as giving us the correct architectural behaviour for v8.1M and the recommended behaviour for v8.0M, this refactoring also removes the old NOCP handling from the remains of the 'legacy decoder' in disas_thumb2_insn(), paving the way for cleaning that up. Since we don't currently have a v8.1M feature bit or any v8.1M CPUs, the minor changes to this logic that we'll need for v8.1M are marked up with TODO comments. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200803111849.13368-6-peter.maydell@linaro.org
2020-08-24target/arm: Tidy up disas_arm_insn()Peter Maydell
The only thing left in the "legacy decoder" is the handling of disas_xscale_insn(), and we can simplify the code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200803111849.13368-5-peter.maydell@linaro.org
2020-08-24target/arm: Convert A32 coprocessor insns to decodetreePeter Maydell
Convert the A32 coprocessor instructions to decodetree. Note that this corrects an underdecoding: for the 64-bit access case (MRRC/MCRR) we did not check that bits [24:21] were 0b0010, so we would incorrectly treat LDC/STC as MRRC/MCRR rather than UNDEFing them. The decodetree versions of these insns assume the coprocessor is in the range 0..7 or 14..15. This is architecturally sensible (as per the comments) and OK in practice for QEMU because the only uses of the ARMCPRegInfo infrastructure we have that aren't for coprocessors 14 or 15 are the pxa2xx use of coprocessor 6. We add an assertion to the define_one_arm_cp_reg_with_opaque() function to catch any accidental future attempts to use it to define coprocessor registers for invalid coprocessors. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200803111849.13368-4-peter.maydell@linaro.org
2020-08-24target/arm: Separate decode from handling of coproc insnsPeter Maydell
As a prelude to making coproc insns use decodetree, split out the part of disas_coproc_insn() which does instruction decoding from the part which does the actual work, and make do_coproc_insn() handle the UNDEF-on-bad-permissions and similar cases itself rather than returning 1 to eventually percolate up to a callsite that calls unallocated_encoding() for it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200803111849.13368-3-peter.maydell@linaro.org
2020-08-24target/arm: Pull handling of XScale insns out of disas_coproc_insn()Peter Maydell
At the moment we check for XScale/iwMMXt insns inside disas_coproc_insn(): for CPUs with ARM_FEATURE_XSCALE all copro insns with cp 0 or 1 are handled specially. This works, but is an odd place for this check, because disas_coproc_insn() is called from both the Arm and Thumb decoders but the XScale case never applies for Thumb (all the XScale CPUs were ARMv5, which has only Thumb1, not Thumb2 with the 32-bit coprocessor insn encodings). It also makes it awkward to convert the real copro access insns to decodetree. Move the identification of XScale out to its own function which is only called from disas_arm_insn(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200803111849.13368-2-peter.maydell@linaro.org
2020-08-24docs/system/arm: Document the Xilinx Versal Virt boardEdgar E. Iglesias
Document the Xilinx Versal Virt board. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200803164749.301971-2-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmuv3: Advertise SMMUv3.2 range invalidationEric Auger
Expose the RIL bit so that the guest driver uses range invalidation. Although RIL is a 3.2 features, We let the AIDR advertise SMMUv3.1 support as v3.x implementation is allowed to implement features from v3.(x+1). Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-12-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmuv3: Support HAD and advertise SMMUv3.1 supportEric Auger
HAD is a mandatory features with SMMUv3.1 if S1P is set, which is our case. Other 3.1 mandatory features come with S2P which we don't have. So let's support HAD and advertise SMMUv3.1 support in AIDR. HAD support allows the CD to disable hierarchical attributes, ie. if the HAD0/1 bit is set, the APTable field of table descriptors walked through TTB0/1 is ignored. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-11-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmuv3: Let AIDR advertise SMMUv3.0 supportEric Auger
Add the support for AIDR register. It currently advertises SMMU V3.0 spec. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-10-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmuv3: Fix IIDR offsetEric Auger
The SMMU IIDR register is at 0x018 offset. Fixes: 10a83cb9887 ("hw/arm/smmuv3: Skeleton") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-9-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmuv3: Get prepared for range invalidationEric Auger
Enhance the smmu_iotlb_inv_iova() helper with range invalidation. This uses the new fields passed in the NH_VA and NH_VAA commands: the size of the range, the level and the granule. As NH_VA and NH_VAA both use those fields, their decoding and handling is factorized in a new smmuv3_s1_range_inval() helper. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-8-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmuv3: Introduce smmuv3_s1_range_inval() helperEric Auger
Let's introduce an helper for S1 IOVA range invalidation. This will be used for NH_VA and NH_VAA commands. It decodes the same fields, trace, calls the UNMAP notifiers and invalidate the corresponding IOTLB entries. At the moment, we do not support 3.2 range invalidation yet. So it reduces to a single IOVA invalidation. Note the leaf bit now is also decoded for the CMD_TLBI_NH_VAA command. At the moment it is only used for tracing. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-7-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmu-common: Manage IOTLB block entriesEric Auger
At the moment each entry in the IOTLB corresponds to a page sized mapping (4K, 16K or 64K), even if the page belongs to a mapped block. In case of block mapping this unefficiently consumes IOTLB entries. Change the value of the entry so that it reflects the actual mapping it belongs to (block or page start address and size). Also the level/tg of the entry is encoded in the key. In subsequent patches we will enable range invalidation. This latter is able to provide the level/tg of the entry. Encoding the level/tg directly in the key will allow to invalidate using g_hash_table_remove() when num_pages equals to 1. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-6-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmu: Introduce SMMUTLBEntry for PTW and IOTLB valueEric Auger
Introduce a specialized SMMUTLBEntry to store the result of the PTW and cache in the IOTLB. This structure extends the generic IOMMUTLBEntry struct with the level of the entry and the granule size. Those latter will be useful when implementing range invalidation. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-5-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmu: Introduce smmu_get_iotlb_key()Eric Auger
Introduce the smmu_get_iotlb_key() helper and the SMMU_IOTLB_ASID() macro. Also move smmu_get_iotlb_key and smmu_iotlb_key_hash in the IOTLB related code section. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmu-common: Add IOTLB helpersEric Auger
Add two helpers: one to lookup for a given IOTLB entry and one to insert a new entry. We also move the tracing there. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/arm/smmu-common: Factorize some code in smmu_ptw_64()Eric Auger
Page and block PTE decoding can share some code. Let's first handle table PTE and factorize some code shared by page and block PTEs. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200728150815.11446-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24hw/cpu/a9mpcore: Verify the machine use Cortex-A9 coresPhilippe Mathieu-Daudé
The 'Cortex-A9MPCore internal peripheral' block can only be used with Cortex A5 and A9 cores. As we don't model the A5 yet, simply check the machine cpu core is a Cortex A9. If not return an error. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200709152337.15533-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-23Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/linux-user-for-5.2-pull-request' into staging Add clock_getres_time64, timer_gettime64, timer_settime64, timerfd_gettime64, timerfd_settime64 Some fixes (page protection, print_fdset, timerspec, itimerspec) # gpg: Signature made Sun 23 Aug 2020 15:58:53 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/linux-user-for-5.2-pull-request: linux-user: Fix 'utimensat()' implementation linux-user: Add support for a group of 2038 safe syscalls linux-user: Modify 'target_to_host/host_to_target_itimerspec()' linux-user: Adjust guest page protection for the host linux-user: Validate mmap/mprotect prot value linux-user: Fix "print_fdset()" in "strace.c" to not print ", " after last value Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-23linux-user: Fix 'utimensat()' implementationFilip Bozuta
Implementation of syscall 'utimensat()' in 'syscall.c' uses functions target_to_host/host_to_target_timespec() to convert values of 'struct timespec' between host and target. However, the implementation doesn't check whether the conversion succeeds and thus can cause an inappropriate error or succeed unappropriately instead of setting errno EFAULT ('Bad address') which is supposed to be set in these cases. This was confirmed with the LTP test for utimensat ('testcases/utimensat') which fails for test cases when the errno EFAULT is expected. After changes from this patch, the test passes for all test cases. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200811113101.6636-1-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-23linux-user: Add support for a group of 2038 safe syscallsFilip Bozuta
This patch implements functionality for following time64 syscalls: *clock_getres_time64 This a year 2038 safe variant of syscall: int clock_getres(clockid_t clockid, struct timespec *res) --finding the resoultion of a specified clock-- man page: https://man7.org/linux/man-pages/man2/clock_getres.2.html *timer_gettime64 *timer_settime64 These are year 2038 safe variants of syscalls: int timer_settime(timer_t timerid, int flags, const struct itimerspec *new_value, struct itimerspec *old_value) int timer_gettime(timer_t timerid, struct itimerspec *curr_value) --arming/dissarming and fetching state of POSIX per-process timer-- man page: https://man7.org/linux/man-pages/man2/timer_settime.2.html *timerfd_gettime64 *timerfd_settime64 These are year 2038 safe variants of syscalls: int timerfd_settime(int fd, int flags, const struct itimerspec *new_value, struct itimerspec *old_value) int timerfd_gettime(int fd, struct itimerspec *curr_value) --timers that notify via file descriptor-- man page: https://man7.org/linux/man-pages/man2/timerfd_settime.2.html Implementation notes: Syscall 'clock_getres_time64' was implemented similarly to 'clock_getres()'. The only difference was that for the conversion of 'struct timespec' from host to target, function 'host_to_target_timespec64()' was used instead of 'host_to_target_timespec()'. For other syscalls, new functions 'host_to_target_itimerspec64()' and 'target_to_host_itimerspec64()' were added to convert the value of the 'struct itimerspec' from host to target and vice versa. A new type 'struct target__kernel_itimerspec' was added in 'syscall_defs.h'. This type was defined with fields which are of the already defined type 'struct target_timespec'. This new 'struct target__kernel_itimerspec' type is used in these new converting functions. These new functions were defined similarly to 'host_to_target_itimerspec()' and 'target_to_host_itimerspec()' the only difference being that 'target_to_host_timespec64()' and 'host_to_target_timespec64()' were used. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200722153421.295411-3-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-23linux-user: Modify 'target_to_host/host_to_target_itimerspec()'Filip Bozuta
Functions 'target_to_host_itimerspec()' and 'host_to_target_itimerspec()' are used to convert values of type 'struct itimerspec' between target and host. This type has 'struct timespec' as its fields. That is the reason why this patch introduces a little modification to the converting functions to be implemented using already existing functions that convert 'struct timespec': 'target_to_host_timespec()' and 'host_to_target_timespec()'. This makes the code of 'target_to_host_itimerspec()' and 'host_to_target_itimerspec()' more clean and readable. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200722153421.295411-2-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-23linux-user: Adjust guest page protection for the hostRichard Henderson
Executable guest pages are never directly executed by the host, but do need to be readable for translation. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200519185645.3915-3-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-23linux-user: Validate mmap/mprotect prot valueRichard Henderson
The kernel will return -EINVAL for bits set in the prot argument that are unknown or invalid. Previously we were simply cropping out the bits that we care about. Introduce validate_prot_to_pageflags to perform this check in a single place between the two syscalls. Differentiate between the target and host versions of prot. Compute the qemu internal page_flags value at the same time. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200519185645.3915-2-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-23linux-user: Fix "print_fdset()" in "strace.c" to not print ", " after last valueFilip Bozuta
Function "print_fdset()" in "strace.c" is used to print the file descriptor values in "print__newselect()" which prints arguments of syscall _newselect(). Until changes from this patch, this function was printing "," even after the last value of the fd_set argument. This was changed in this patch by removing this unnecessary "," after the last fd value and thus improving the estetics of the _newselect() "-strace" print. Implementation notes: The printing fix was made possible by using an existing function "get_comma()" which returns a "," or an empty string "" based on its argument (0 for "," and other for ""). Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200702160915.9517-1-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-23Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20200821-1' into staging The first RISC-V PR for the 5.2 window. This includes: - NaNBox fixes - Vector extension improvements - a L2 cache controller - PMP fixes - Upgrade to OpenSBI v0.8 and the generic platform - Fixes for the Ibex PLIC # gpg: Signature made Sat 22 Aug 2020 06:38:18 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200821-1: hw/intc: ibex_plic: Honour source priorities hw/intc: ibex_plic: Don't allow repeat interrupts on claimed lines hw/intc: ibex_plic: Update the pending irqs target/riscv: Change the TLB page size depends on PMP entries. target/riscv: Fix the translation of physical address gitlab-ci/opensbi: Update GitLab CI to build generic platform hw/riscv: spike: Change the default bios to use generic platform image hw/riscv: Use pre-built bios image of generic platform for virt & sifive_u roms/Makefile: Build the generic platform for RISC-V OpenSBI firmware roms/opensbi: Upgrade from v0.7 to v0.8 configure: Create symbolic links for pc-bios/*.elf files riscv: Fix bug in setting pmpcfg CSR for RISCV64 hw/riscv: sifive_u: Add a dummy L2 cache controller device target/riscv: check before allocating TCG temps target/riscv: Clean up fmv.w.x target/riscv: Check nanboxed inputs in trans_rvf.inc.c target/riscv: Check nanboxed inputs to fp helpers target/riscv: Generate nanboxed results from trans_rvf.inc.c target/riscv: Generalize gen_nanbox_fpr to gen_nanbox_s target/riscv: Generate nanboxed results from fp helpers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-22Merge remote-tracking branch 'remotes/philmd-gitlab/tags/sd-next-20200821' ↵Peter Maydell
into staging SD/MMC patches - Convert legacy SD host controller to the SDBus API - Move legacy API to a separate "sdcard_legacy.h" header - Introduce methods to access multiple bytes on SDBus data lines - Fix 'switch function' group location - Fix SDSC maximum card size (2GB) CI jobs result: https://gitlab.com/philmd/qemu/-/pipelines/180605963 # gpg: Signature made Fri 21 Aug 2020 18:27:50 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/sd-next-20200821: (23 commits) hw/sd: Correct the maximum size of a Standard Capacity SD Memory Card hw/sd: Fix incorrect populated function switch status data structure hw/sd: Use sdbus_read_data() instead of sdbus_read_byte() when possible hw/sd: Add sdbus_read_data() to read multiples bytes on the data line hw/sd: Use sdbus_write_data() instead of sdbus_write_byte when possible hw/sd: Add sdbus_write_data() to write multiples bytes on the data line hw/sd: Rename sdbus_read_data() as sdbus_read_byte() hw/sd: Rename sdbus_write_data() as sdbus_write_byte() hw/sd: Rename read/write_data() as read/write_byte() hw/sd: Move sdcard legacy API to 'hw/sd/sdcard_legacy.h' hw/sd/sdcard: Make sd_data_ready() static hw/sd/pl181: Replace disabled fprintf()s by trace events hw/sd/pl181: Do not create SD card within the SD host controller hw/sd/pl181: Expose a SDBus and connect the SDCard to it hw/sd/pl181: Use named GPIOs hw/sd/pl181: Add TODO to use Fifo32 API hw/sd/pl181: Rename pl181_send_command() as pl181_do_command() hw/sd/pl181: Replace fprintf(stderr, "*\n") with error_report() hw/sd/milkymist: Do not create SD card within the SD host controller hw/sd/milkymist: Create the SDBus at init() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-22Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging meson fixes: * --disable-tools --enable-system build * s390 no-TCG build * fdmon-io_uring * 'shift' error message in version_ge() # gpg: Signature made Fri 21 Aug 2020 22:12:29 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: keymaps: update meson: Fix --disable-tools --enable-system builds meson: convert pc-bios/keymaps/Makefile configure: silence 'shift' error message in version_ge() util/meson.build: fix fdmon-io_uring build target/s390x: fix meson.build issue Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-22Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2020-08-21' ↵Peter Maydell
into staging bitmaps patches for 2020-08-21 - Andrey Shinkevich: Enhance qcow2.py for iotest inspection of qcow2 images - Max Reitz: Add block-bitmap-mapping migration parameter # gpg: Signature made Fri 21 Aug 2020 15:05:07 BST # gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full] # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full] # gpg: aka "[jpeg image of size 6874]" [full] # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-bitmaps-2020-08-21: iotests: Test node/bitmap aliases during migration iotests.py: Let wait_migration() return on failure migration: Add block-bitmap-mapping parameter iotests: dump QCOW2 header in JSON in #303 qcow2_format.py: support dumping metadata in JSON format qcow2_format.py: collect fields to dump in JSON format qcow2.py: Introduce '-j' key to dump in JSON format qcow2_format.py: Dump bitmap table serialized entries qcow2_format.py: pass cluster size to substructures qcow2_format.py: Dump bitmap directory information qcow2_format.py: dump bitmap flags in human readable way. qcow2_format.py: change Qcow2BitmapExt initialization method qcow2_format.py: make printable data an extension class member iotests: add test for QCOW2 header dump Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-22Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine queue 2020-08-19 Regular post-release changes: * hw: add compat machines for 5.2 (Cornelia Huck) Features: * qmp: Expose MachineClass::default_ram_id (Michal Privoznik) Cleanups: * qdev: Document qdev_prop_set_drive_err() return value (Philippe Mathieu-Daudé) # gpg: Signature made Wed 19 Aug 2020 16:21:55 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: hw: add compat machines for 5.2 qmp: Expose MachineClass::default_ram_id qdev: Document qdev_prop_set_drive_err() return value Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-21hw/intc: ibex_plic: Honour source prioritiesAlistair Francis
This patch follows what commit aa4d30f6618dc "riscv: plic: Honour source priorities" does and ensures that the highest priority interrupt will be serviced first. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Cc: Jessica Clarke <jrtc27@jrtc27.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <a697ca8a31eff8eb18a88e09a28206063cf85d48.1595655188.git.alistair.francis@wdc.com>
2020-08-21hw/intc: ibex_plic: Don't allow repeat interrupts on claimed linesAlistair Francis
Once an interrupt has been claimed, but before it has been compelted we shouldn't receive any more pending interrupts. This patche keeps track of this to ensure that we don't see any more interrupts until it is completed. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <394c3f070615ff2b4fab61a1cf9cb48c122913b7.1595655188.git.alistair.francis@wdc.com>
2020-08-21hw/intc: ibex_plic: Update the pending irqsAlistair Francis
After a claim or a priority change we need to update the pending interrupts. This is based on the same patch for the SiFive PLIC: 55765822804f5a58594e "riscv: plic: Add a couple of mising sifive_plic_update calls" Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Cc: Jessica Clarke <jrtc27@jrtc27.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <0693aa700a4c67c49b3f1c973a82b257fdb7198d.1595655188.git.alistair.francis@wdc.com>
2020-08-21target/riscv: Change the TLB page size depends on PMP entries.Zong Li
The minimum granularity of PMP is 4 bytes, it is small than 4KB page size, therefore, the pmp checking would be ignored if its range doesn't start from the alignment of one page. This patch detects the pmp entries and sets the small page size to TLB if there is a PMP entry which cover the page size. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <6b0bf48662ef26ab4c15381a08e78a74ebd7ca79.1595924470.git.zong.li@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21target/riscv: Fix the translation of physical addressZong Li
The real physical address should add the 12 bits page offset. It also causes the PMP wrong checking due to the minimum granularity of PMP is 4 byte, but we always get the physical address which is 4KB alignment, that means, we always use the start address of the page to check PMP for all addresses which in the same page. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <370a983d0f9e8a9a927b9bb8af5e7bc84b1bf9b1.1595924470.git.zong.li@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21gitlab-ci/opensbi: Update GitLab CI to build generic platformBin Meng
This updates the GitLab CI opensbi job to build opensbi bios images for the generic platform. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1596439832-29238-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21hw/riscv: spike: Change the default bios to use generic platform imageBin Meng
To keep sync with other RISC-V machines, change the default bios to use generic platform fw_dynamic.elf image. While we are here, add some comments to mention that using ELF files for the Spike machine was intentional. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1596439832-29238-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21hw/riscv: Use pre-built bios image of generic platform for virt & sifive_uBin Meng
Update virt and sifive_u machines to use the opensbi fw_dynamic bios image built for the generic FDT platform. Remove the out-of-date no longer used bios images. Note: 1. To test 32-bit Linux kernel on QEMU 'sifive_u' 32-bit machine, the following patch is needed: http://lists.infradead.org/pipermail/linux-riscv/2020-July/001213.html 2. To test 64-bit Linux 5.3 kernel on QEMU 'virt' or 'sifive_u' 64-bit machines, the following commit should be cherry-picked to 5.3: commit 922b0375fc93fb1a20c5617e37c389c26bbccb70 Author: Albert Ou <aou@eecs.berkeley.edu> Date: Fri Sep 27 16:14:18 2019 -0700 riscv: Fix memblock reservation for device tree blob Linux 5.4 or above already contains this commit/fix. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1596439832-29238-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21roms/Makefile: Build the generic platform for RISC-V OpenSBI firmwareBin Meng
The RISC-V generic platform is a flattened device tree (FDT) based platform where all platform specific functionality is provided based on FDT passed by previous booting stage. The support was added in the upstream OpenSBI v0.8 release recently. Update our Makefile to build the generic platform instead of building virt and sifive_u separately for RISC-V OpenSBI firmware, and change to use fw_dynamic type images as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1596439832-29238-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21roms/opensbi: Upgrade from v0.7 to v0.8Bin Meng
Upgrade OpenSBI from v0.7 to v0.8. The v0.8 release includes the following commits: 1bb00ab lib: No need to provide default PMP region using platform callbacks a9eac67 include: sbi_platform: Combine reboot and shutdown into one callback 6585fab lib: utils: Add SiFive test device 4781545 platform: Add Nuclei UX600 platform 3a326af scripts: adapt binary archive script for Nuclei UX600 5bdf022 firmware: fw_base: Remove CSR_MTVEC update check e6c1345 lib: utils/serial: Skip baudrate config if input frequency is zero 01a8c8e lib: utils: Improve fdt_parse_uart8250() API 0a0093b lib: utils: Add fdt_parse_uart8250_node() function 243b0d0 lib: utils: Remove redundant clint_ipi_sync() declaration e3ad7c1 lib: utils: Rename fdt_parse_clint() to fdt_parse_compat_addr() a39cd6f lib: utils: Add FDT match table based node lookup dd33b9e lib: utils: Make fdt_get_node_addr_size() public function 66185b3 lib: utils: Add fdt_parse_sifive_uart_node() function 19e966b lib: utils: Add fdt_parse_hart_id() function 44dd7be lib: utils: Add fdt_parse_max_hart_id() API f0eb503 lib: utils: Add fdt_parse_plic_node() function 1ac794c include: Add array_size() macro 8ff2b94 lib: utils: Add simple FDT timer framework 76f0f81 lib: utils: Add simple FDT ipi framework 75322a6 lib: utils: Add simple FDT irqchip framework 76a8940 lib: utils: Add simple FDT serial framework 7cc6fa4 lib: utils: Add simple FDT reset framework 4d06353 firmware: fw_base: Introduce optional fw_platform_init() f1aa9e5 platform: Add generic FDT based platform support 1f21b99 lib: sbi: Print platform hart count at boot time 2ba7087 scripts: Add generic platform to create-binary-archive.sh 4f18c6e platform: generic: Add Sifive FU540 TLB flush range limit override 13717a8 platform: Remove qemu/virt directory 65c06b0 platform: Remove spike directory d626037 docs: Add missing links in platform.md 7993ca2 include: sbi: Remove redundant page table related defines 5338679 lib: sbi_tlb: Fix remote TLB HFENCE VVMA implementation dc38929 lib: sbi: Improve misa_string() implementation 433bac7 docs: platform/generic: Add details about stdout-path DT property b4efa70 docs: platform/generic: Add details about IPI and timer expectations dfd9dd6 docs: Add platform requirements document c2286b6 docs: Fix ordering of pages in table of contents 7be75f5 docs: Don't use italic text in page title 63a513e lib: Rename unprivileged trap handler aef9a60 lib: Add csr detect support 13ca20d lib: Create a separate math helper function file 79d0fad lib: utils: Update reserved memory fdt node even if PMP is not present 6a053f6 lib: Add support for hart specific features b2df751 platform: Move platform features to hart 4938024 platform: fpga: Remove redundant platform specific features ec0d2a7 lib: timer: Provide a hart based timer feature 1f235ec lib: Add platform features in boot time print 22c4334 lib: Add hart features in boot time print 36833ab lib: Optimize inline assembly for unprivilege access functions 38a4b54 firmware: Correct spelling mistakes 28b4052 lib: sbi: detect features before everything else in sbi_hart_init() 4984183 lib: sbi: Improve get_feature_str() implementation and usage 3aa1036 lib: sbi: Remove extra spaces from boot time prints 3a8fc81 lib: sbi: Print platform HART count just before boot HART id 63b0f5f include: sbi: Use scratch pointer as parmeter in HART feature APIs 2966510 lib: sbi: Few cosmetic improvements to HART feature detection a38bea9 lib: sbi_hart: Detect number of supported PMP regions 89ba634 include: sbi: Add firmware extension constants 73d6ef3 lib: utils: Remove redundant parameters from PLIC init functions 446a9c6 lib: utils: Allow PLIC functions to be used for multiple PLICs 2c685c2 lib: utils: Extend fdt_find_match() Implementation d30bb68 lib: utils/irqchip: Initialize all matching irqchip DT nodes a9a9751 lib: utils: Allow CLINT functions to be used for multiple CLINTs 569dd64 lib: utils: Add fdt_parse_clint_node() function 6956e83 lib: utils/ipi: Initialize all matching ipi DT nodes a63f05f lib: utils/timer: Initialize all matching timer DT nodes 30b6040 Makefile: Fix builtin DTB compilation for out-of-tree platforms 64f1408 firmware: fw_base: Make builtin DTB available to fw_platform_init() 4ce6b7a firmware: fw_base: Don't OR forced FW_OPTIONS 86ec534 firmware: Allow fw_platform_init() to return updated FDT location c6c65ee Makefile: Preprocess builtin DTS 4e3876d Makefile: Add mechanism for platforms to have multiple builtin DTBs 72019ee platform: kendryte/k210: Use new mechanism of builtin DTB 51f0e4a firmware: Remove FW_PAYLOAD_FDT and related documentation 1b8c012 lib: Add RISC-V hypervisor v0.6.1 support 79bfd67 docs: Use doxygen config to mark the main page 106b888 docs: Remove redundant documentation about combined payload use case 9802906 platform: Add AE350 platform specific SBI handler 32f87e5 platform: Add AE350 cache control SBIs e2c3f01 lib: Fix __sbi_hfence_gvma_vmid_gpa() and __sbi_hfence_vvma_asid_va() 6966ad0 platform/lib: Allow the OS to map the regions that are protected by PMP 518e85c platform: Update Nuclei ux600 platform support d5725c2 lib: Don't print delegation CSRs if there is no S-Mode 637b348 lib: Fix the SBI_HART_HAS_MCOUNTEREN feature check db56ef3 platform: Add support for Shakti C-class SoC from IIT-M 9bd5f8f lib: sbi: Fix 32/64 bits variable compatibility 2314101 lib: Don't return any invalid error from SBI ecall a98258d include: Bump-up version to 0.8 Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1596439832-29238-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21configure: Create symbolic links for pc-bios/*.elf filesBin Meng
Now we need to ship the OpenSBI fw_dynamic.elf image for the RISC-V Spike machine, it requires us to create symbolic links for pc-bios/*.elf files. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1596439832-29238-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21riscv: Fix bug in setting pmpcfg CSR for RISCV64Hou Weiying
First, sizeof(target_ulong) equals to 4 on riscv32, so this change does not change the function on riscv32. Second, sizeof(target_ulong) equals to 8 on riscv64, and 'reg_index * 8 + i' is not a legal pmp_index (we will explain later), which should be 'reg_index * 4 + i'. If the parameter reg_index equals to 2 (means that we will change the value of pmpcfg2, or the second pmpcfg on riscv64), then pmpcfg_csr_write(env, 2, val) will map write tasks to pmp_write_cfg(env, 2 * 8 + [0...7], val). However, no cfg csr is indexed by value 16 or 23 on riscv64, so we consider it as a bug. We are looking for constant (e.g., define a new constant named RISCV_WORD_SIZE) in QEMU to help others understand code better, but none was found. A possible good explanation of this literal is it is the minimum word length on riscv is 4 bytes (32 bit). Signed-off-by: Hongzheng-Li <Ethan.Lee.QNL@gmail.com> Signed-off-by: Hou Weiying <weiying_hou@outlook.com> Signed-off-by: Myriad-Dreamin <camiyoru@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <SG2PR02MB263420036254AC8841F66CE393460@SG2PR02MB2634.apcprd02.prod.outlook.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21hw/riscv: sifive_u: Add a dummy L2 cache controller deviceBin Meng
It is enough to simply map the SiFive FU540 L2 cache controller into the MMIO space using create_unimplemented_device(), with an FDT fragment generated, to make the latest upstream U-Boot happy. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1595227748-24720-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21target/riscv: check before allocating TCG tempsLIU Zhiwei
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200626205917.4545-5-zhiwei_liu@c-sky.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200724002807.441147-8-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21target/riscv: Clean up fmv.w.xLIU Zhiwei
Use tcg_gen_extu_tl_i64 to avoid the ifdef. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200626205917.4545-7-zhiwei_liu@c-sky.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200724002807.441147-7-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21target/riscv: Check nanboxed inputs in trans_rvf.inc.cRichard Henderson
If a 32-bit input is not properly nanboxed, then the input is replaced with the default qnan. The only inline expansion is for the sign-changing set of instructions: FSGNJ.S, FSGNJX.S, FSGNJN.S. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Message-Id: <20200724002807.441147-6-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21target/riscv: Check nanboxed inputs to fp helpersRichard Henderson
If a 32-bit input is not properly nanboxed, then the input is replaced with the default qnan. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Message-Id: <20200724002807.441147-5-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21target/riscv: Generate nanboxed results from trans_rvf.inc.cRichard Henderson
Make sure that all results from inline single-precision scalar operations are properly nan-boxed to 64-bits. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Message-Id: <20200724002807.441147-4-richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-09 03:48:53 +0000