aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-08-05vfio: Fix MSI-X vector expansionAlex Williamson
When new MSI-X vectors are enabled we need to disable MSI-X and re-enable it with the correct number of vectors. That means we need to reprogram the eventfd triggers for each vector. Prior to f4d45d47 vector->use tracked whether a vector was masked or unmasked and we could always pick the KVM path when available for unmasked vectors. Now vfio doesn't track mask state itself and vector->use and virq remains configured even for masked vectors. Therefore we need to ask the MSI-X code whether a vector is masked in order to select the correct signaling path. As noted in the comment, MSI relies on hardware to handle masking. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: qemu-stable@nongnu.org # QEMU 2.1
2014-08-04Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20140804' into staging target-arm queue: * Set PC correctly when loading AArch64 ELF files * sdhci: Fix ADMA dma_memory_read access * some more foundational work for EL2/EL3 support * fix bugs which reveal themselves if the TARGET_PAGE_SIZE is not set to 1K # gpg: Signature made Mon 04 Aug 2014 14:51:34 BST using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20140804: target-arm: A64: fix TLB flush instructions target-arm: don't hardcode mask values in arm_cpu_handle_mmu_fault target-arm: Fix bit test in sp_el0_access target-arm: Add FAR_EL2 and 3 target-arm: Add ESR_EL2 and 3 target-arm: Make far_el1 an array target-arm: A64: Respect SPSEL when taking exceptions target-arm: A64: Respect SPSEL in ERET SP restore target-arm: A64: Break out aarch64_save/restore_sp sd: sdhci: Fix ADMA dma_memory_read access hw/arm/virt: formatting: memory map hw/arm/boot: Set PC correctly when loading AArch64 ELF files Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: A64: fix TLB flush instructionsAlex Bennée
According to the ARM ARM we weren't correctly flushing the TLB entries where bits 63:56 didn't match bit 55 of the virtual address. This exposed a problem when we switched QEMU's internal TARGET_PAGE_BITS to 12 for aarch64. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1406733627-24255-3-git-send-email-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: don't hardcode mask values in arm_cpu_handle_mmu_faultAlex Bennée
Otherwise we break quickly when we change TARGET_PAGE_SIZE. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1406733627-24255-2-git-send-email-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: Fix bit test in sp_el0_accessStefan Weil
Static code analyzers complain about a dubious & operation used for a boolean value. The code does not test the PSTATE_SP bit as it should. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-id: 1406359601-25583-1-git-send-email-sw@weilnetz.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: Add FAR_EL2 and 3Edgar E. Iglesias
Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1402994746-8328-7-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: Add ESR_EL2 and 3Edgar E. Iglesias
Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1402994746-8328-6-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: Make far_el1 an arrayEdgar E. Iglesias
No functional change. Prepares for future additions of the EL2 and 3 versions of this reg. Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1402994746-8328-5-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: A64: Respect SPSEL when taking exceptionsEdgar E. Iglesias
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Message-id: 1402994746-8328-4-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: A64: Respect SPSEL in ERET SP restoreEdgar E. Iglesias
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Message-id: 1402994746-8328-3-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: A64: Break out aarch64_save/restore_spEdgar E. Iglesias
Break out code to save/restore AArch64 SP into functions. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Message-id: 1402994746-8328-2-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04sd: sdhci: Fix ADMA dma_memory_read accessPeter Crosthwaite
This dma_memory_read was giving too big a size when begin was non-zero. This could cause segfaults in some circumstances. Fix. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04hw/arm/virt: formatting: memory mapAndrew Jones
Add some spacing and zeros to make it easier to read and modify the map. This patch has no functional changes. The review looks ugly, but it's actually pretty easy to confirm all the addresses are as they should be - thanks to the new formatting ;-) Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04hw/arm/boot: Set PC correctly when loading AArch64 ELF filesPeter Maydell
The code in do_cpu_reset() correctly handled AArch64 CPUs when running Linux kernels, but was missing code in the branch of the if() that deals with loading ELF files. Correctly jump to the ELF entry point on reset rather than leaving the reset PC at zero. Reported-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Christopher Covington <cov@codeaurora.org> Cc: qemu-stable@nongnu.org
2014-08-04Merge remote-tracking branch 'remotes/amit-migration/for-2.2' into stagingPeter Maydell
* remotes/amit-migration/for-2.2: checker: ignore fields marked unused vmstate static checker: whitelist additions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04Merge remote-tracking branch 'remotes/amit-virtio-rng/for-2.2' into stagingPeter Maydell
* remotes/amit-virtio-rng/for-2.2: virtio-rng: replace error_set calls with error_setg virtio-rng: Move error-checking forward to prevent memory leak Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04Merge remote-tracking branch 'remotes/sstabellini/xen-20140801' into stagingPeter Maydell
* remotes/sstabellini/xen-20140801: qemu: support xen hvm direct kernel boot tap-bsd: implement a FreeBSD only version of tap_open xen: fix usage of ENODATA Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04checker: ignore fields marked unusedAmit Shah
While comparing qemu-1.0 json output with qemu-2.1, a few fields got marked unused. These need to be skipped over, and not flagged as mismatches. For handling unused fields, the exact number of bytes need to be skipped over as the size of the unused field. Currently, only the term "unused" is matched. When more field names turn up, this will have to be updated based on the whitelist matching method to match more such terms. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-08-04virtio-rng: replace error_set calls with error_setgJohn Snow
Under recommendation from Luiz Capitulino, we are changing the error_set calls to error_setg while we are fixing up the error handling pathways of virtio-rng. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-08-04virtio-rng: Move error-checking forward to prevent memory leakJohn Snow
This patch pushes the error-checking forward and the virtio initialization backward in the device realization function in order to prevent memory leaks for hot plug scenarios. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-08-01Open 2.2 development treePeter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-01qemu: support xen hvm direct kernel bootChunyan Liu
qemu side patch to support xen HVM direct kernel boot: if -kernel exists, calls xen_load_linux(), which will read kernel/initrd and add a linuxboot.bin or multiboot.bin option rom. The linuxboot.bin/multiboot.bin will load kernel/initrd and jump to execute kernel directly. It's working when xen uses seabios. During this work, found the 'kvmvapic' is in option_rom list, it should not be there in xen case. Set s->vapic_control = 0 in xen_apic_realize() to handle that. Signed-off-by: Chunyan Liu <cyliu@suse.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2014-08-01tap-bsd: implement a FreeBSD only version of tap_openRoger Pau Monne
The current behaviour of tap_open for BSD systems differ greatly from it's Linux counterpart. Since FreeBSD supports interface renaming and tap device cloning by opening /dev/tap, implement a FreeBSD specific version of tap_open that behaves like it's Linux counterpart. This is specially important for toolstacks that use Qemu (like Xen libxl), in order to have a unified behaviour across suported platforms. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-01xen: fix usage of ENODATARoger Pau Monne
ENODATA doesn't exist on FreeBSD, so ENODATA errors returned by the hypervisor are translated to ENOENT. Also, the error code is returned in errno if the call returns -1, so compare the error code with the value in errno instead of the value returned by the function. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: xen-devel@lists.xenproject.org Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Anthony Perard <anthony.perard@citrix.com>
2014-08-01Update version for v2.1.0 releasev2.1.0Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-29Update version for v2.1.0-rc5 releasev2.1.0-rc5Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-29hw/arm/virt: fix pl031 addr typoAndrew Jones
pl031's base address should be 0x9010000, not 0x90010000, otherwise it sits in ram when configuring a guest with greater than 1G. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-29Update version for v2.1.0-rc4 releasev2.1.0-rc4Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-29po: update Italian translationPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-29po: Update French translationAurelien Jarno
Add new translations for recently added messages. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-29Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc migration fixes Last minute fixes for migration. It seems that if we don't fix it now, fixing it in the next version will be even more painful ... Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 29 Jul 2014 11:45:18 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: piix: set legacy table size for 1.7 acpi-build: tweak acpi migration limits pc: future-proof migration-compatibility of ACPI tables acpi-build: minor code cleanup pc: acpi: generate AML only for PCI0 devices if PCI bridge hotplug is disabled bios-tables-test: fix ASL normalization false positive pc: hack for migration compatibility from QEMU 2.0 acpi-dsdt: procedurally generate _PRT Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-29piix: set legacy table size for 1.7Michael S. Tsirkin
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-29acpi-build: tweak acpi migration limitsMichael S. Tsirkin
- Tweak error message for legacy machine type: Basically if table size exceeds the limits we set all bets are off for migration: e.g. it can start failing even within given qemu minor version simply because of a bugfix. - Increase table size to 128k. - Make sure we notice it long before we start getting close to the 128k limit: warn at 64k. - Don't fail if we exceed the limit: most people don't care about migration, even less people care about cross version miration. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-29pc: future-proof migration-compatibility of ACPI tablesPaolo Bonzini
This patch avoids that similar changes break QEMU again in the future. QEMU will now hard-code 64k as the maximum ACPI table size, which (despite being an order of magnitude smaller than 640k) should be enough for everyone. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-29acpi-build: minor code cleanupMichael S. Tsirkin
Fix up and add comments to clarify code, plus a trivial code change for clarity. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-29pc: acpi: generate AML only for PCI0 devices if PCI bridge hotplug is disabledIgor Mammedov
Fixes migration regression from QEMU-1.7 to a newer QEMUs. SSDT table size in QEMU-1.7 doesn't change regardless of a number of PCI bridge devices present at startup. However in QEMU-2.0 since addition of hotplug on PCI bridges, each PCI bridge adds ~1875 bytes to SSDT table, including pc-i440fx-1.7 machine type where PCI bridge hotplug disabled via compat property. It breaks migration from "QEMU-1.7" to "QEMU-2.[01] -M pc-i440fx-1.7" since RAMBlock size of ACPI tables on target becomes larger then on source and migration fails with: "Length mismatch: /rom@etc/acpi/tables: 2000 in != 3000" error. Fix this by generating AML only for PCI0 bus if hotplug on PCI bridges is disabled and preserves PCI brigde description in AML as it was done in QEMU-1.7 for pc-i440fx-1.7. It will help to maintain size of SSDT static regardless of number of PCI bridges on startup for pc-i440fx-1.7 machine type. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-29bios-tables-test: fix ASL normalization false positivePaolo Bonzini
My version of IASL (from RHEL7) puts two newlines between the head comment and the DefinitionBlock property. Kill all newlines after the comment, so that normalize_asl works properly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-07-28po: Update German translationStefan Weil
Line numbers changed, and some translations were missing after commit 3d914488aee3dc1bf495e461aedf8fb4e5bb2270. Update also "Show Tabs" to a more common translation, and remove some old unused lines at the end. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-07-28target-mips/translate.c: Free TCG in OPC_DINSVDongxue Zhang
Free t0 and t1 in opcode OPC_DINSV. Signed-off-by: Dongxue Zhang <elta.era@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-07-28pc: hack for migration compatibility from QEMU 2.0Paolo Bonzini
Changing the ACPI table size causes migration to break, and the memory hotplug work opened our eyes on how horribly we were breaking things in 2.0 already. The ACPI table size is rounded to the next 4k, which one would think gives some headroom. In practice this is not the case, because the user can control the ACPI table size (each CPU adds 97 bytes to the SSDT and 8 to the MADT) and so some "-smp" values will break the 4k boundary and fail to migrate. Similarly, PCI bridges add ~1870 bytes to the SSDT. This patch concerns itself with fixing migration from QEMU 2.0. It computes the payload size of QEMU 2.0 and always uses that one. The previous patch shrunk the ACPI tables enough that the QEMU 2.0 size should always be enough; non-AML tables can change depending on the configuration (especially MADT, SRAT, HPET) but they remain the same between QEMU 2.0 and 2.1, so we only compute our padding based on the sizes of the SSDT and DSDT. Migration from QEMU 1.7 should work for guests that have a number of CPUs other than 12, 13, 14, 54, 55, 56, 97, 98, 139, 140. It was already broken from QEMU 1.7 to QEMU 2.0 in the same way, though. Even with this patch, QEMU 1.7 and 2.0 have two different ideas of "-M pc-i440fx-2.0" when there are PCI bridges. Igor sent a patch to adopt the QEMU 1.7 definition. I think distributions should apply it if they move directly from QEMU 1.7 to 2.1+ without ever packaging version 2.0. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-28acpi-dsdt: procedurally generate _PRTPaolo Bonzini
This replaces the _PRT constant with a method that computes it. The problem is that the DSDT+SSDT have grown from 2.0 to 2.1, enough to cross the 8k barrier (we align the ACPI tables to 4k before putting them in fw_cfg). This causes problems with migration and the pc-i440fx-2.0 machine type. The solution to the problem is to hardcode 64k as the limit, but this doesn't solve the bug with pc-i440fx-2.0. The fix will be for QEMU 2.1 to use exactly the same size as QEMU 2.0 for the ACPI tables. First, however, we must make the actual AML equal or smaller; to do this, rewrite _PRT in a way that saves over 1k of bytecode. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-28Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-07-26' ↵Peter Maydell
into staging trivial patches for 2014-07-26 # gpg: Signature made Sat 26 Jul 2014 08:16:55 BST using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514 66A7 BEE5 9D74 A4C3 D7DB * remotes/mjt/tags/trivial-patches-2014-07-26: qemu-options: fix another allows-to for -net l2tpv3 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-26qemu-options: fix another allows-to for -net l2tpv3Michael Tokarev
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-25Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
Here is the serial fix for 2.1. # gpg: Signature made Fri 25 Jul 2014 13:36:23 BST using RSA key ID 9B4D86F2 # gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>" # gpg: aka "Paolo Bonzini <bonzini@gnu.org>" * remotes/bonzini/tags/for-upstream: qemu-char: ignore flow control if a PTY's slave is not connected Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-25qemu-char: ignore flow control if a PTY's slave is not connectedPaolo Bonzini
After commit f702e62 (serial: change retry logic to avoid concurrency, 2014-07-11), guest boot hangs if the backend is an unconnected PTY. The reason is that PTYs do not support G_IO_HUP, and serial_xmit is never called. To fix this, simply invoke serial_xmit immediately (via g_idle_source_new) when this happens. Tested-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25Merge remote-tracking branch 'remotes/kraxel/tags/pull-vnc-20140725-1' into ↵Peter Maydell
staging vnc: fix two vnc update issues. # gpg: Signature made Fri 25 Jul 2014 08:44:23 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vnc-20140725-1: vnc update fix fix full frame updates for VNC clients Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-25vnc update fixGerd Hoffmann
We need to remember has_updates for each vnc client. Otherwise it might happen that vnc_update_client(has_dirty=1) takes the first exit due to output buffers not being flushed yet and subsequent calls with has_dirty=0 take the second exit, wrongly assuming there is nothing to do because the work defered in the first call is ignored. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Lieven <pl@kamp.de>
2014-07-25fix full frame updates for VNC clientsStephan Kulow
If the client asks for !incremental frame updates, it has lost its content so dirty doesn't matter - it has to see the full frame, so setting force_update Signed-off-by: Stephan Kulow <coolo@suse.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Lieven <pl@kamp.de>
2014-07-24Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into stagingPeter Maydell
* remotes/qmp-unstable/queue/qmp: docs: document missing VSERPORT_CHANGE event docs: document missing POWERDOWN event docs: document missing SPICE_MIGRATE_COMPLETED event docs: split SPICE_* event docs docs: grammar fixes to qmp-events Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-24docs: document missing VSERPORT_CHANGE eventEric Blake
The VSERPORT_CHANGE event was added in e2ae6159. The patch for this event was prepared at a time when this file was gone, even though it got applied immediately after dfab4892 restored this file. Duplicate the documentation into this file, so that anyone using this file instead of qapi will not miss out on this new event. * docs/qmp/qmp-events.txt (VSERPORT_CHANGE): Add. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>