aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-04-24create_config: simplify prefix=* block, remove CONFIG_QEMU_PREFIXEduardo Habkost
As now that block handles only the prefix variable, the code can be much simpler. This also removes the CONFIG_QEMU_PREFIX define as it is not used by any C code. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24create_config: remove *dir blockEduardo Habkost
Now only the qemu_*dir variables will become #defines. The other directory names aren't used by the C code. That means the following #defines won't be available in C code anymore: - CONFIG_QEMU_BINDIR - CONFIG_QEMU_LIBDIR - CONFIG_QEMU_INCLUDEDIR - CONFIG_QEMU_MANDIR - CONFIG_QEMU_SYSCONFDIR - CONFIG_QEMU_LIBEXECDIR The following #defines are going to be kept because they are handled by the qemu_* block on create_config: - CONFIG_QEMU_CONFDIR - CONFIG_QEMU_DATADIR - CONFIG_QEMU_DOCDIR This one will be kept because it is set directly by ./configure: - CONFIG_QEMU_HELPERDIR This patch keeps the 'prefix=*' (CONFIG_QEMU_PREFIX) pattern because other variables may use $prefix on their config-host.mak definitions. The remaining code will be simplified on a further patch. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24config-host.mak: reorder variables a bitEduardo Habkost
Cosmetic change. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24config-host.mak: remove CONFIG_QEMU_SHAREDIREduardo Habkost
There is no code using that variable according to 'git grep', so kill it. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24config-host.mak: rename docdir to qemu_docdirEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24Makefile: use $(qemu_confdir) instead of $(sysconfdir)/qemuEduardo Habkost
Instead of hardcoding the directory suffix, use the qemu-specific directory variable. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24config-host.mak: rename confdir to qemu_confdirEduardo Habkost
$confdir is a confusing name, as it's not clear if it's "the system config dir" or "the Qemus-specific directory inside the config dir". $qemu_confdir makes it more clear. The current C code that uses CONFIG_QEMU_CONFDIR should be safe, as now create_config generates the same #define name (CONFIG_QEMU_CONFDIR) for both "confdir" and "qemu_confdir" variables. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24config-host.mak: rename datadir to qemu_datadirEduardo Habkost
Autoconf concept of "datadir" is supposed to be "$prefix/share", not "$prefix/share/PACKAGE", so using datadir for the Qemu-specific directory is confusing. The current C code that uses CONFIG_QEMU_DATADIR should be safe, as now create_config generates the same #define name (CONFIG_QEMU_DATADIR) for both "datadir" and "qemu_datadir" variables. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24create_config: separate section for qemu_*dir variables (v2)Eduardo Habkost
The generic *dir section will eventually go away and be replaced with qemu_* section. By now, both sections will be kept, while the variables get renamed on config-host.mak. With this patch, a XXXdir variable will become a CONFIG_QEMU_XXXDIR define, and a qemu_XXXdir variable will become CONFIG_QEMU_XXXDIR as well (instead of becoming a CONFIG_QEMU_QEMU_XXXDIR define). Changes v1 -> v2: - Rebase on top of newer qemu.git changes, that changed "tr '[:lower:]' '[:upper:]'" to "LC_ALL=C tr '[a-z]' '[A-Z]'". Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24configure: rename $confdir to $qemu_confdirEduardo Habkost
There's no "confdir" variable on Autoconf, but it's good to make it clear that it's a variable for the Qemu-specific subdirectory inside $sysconfdir. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24configure: rename $docdir to $qemu_docdirEduardo Habkost
The autoconf "docdir" variable is used for the program-specific subdirectory, but anyway it's better to make it clear that the variable is used for the qemu-specific subdirectory path. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24configure: rename $datadir to $qemu_datadirEduardo Habkost
The variable is used for the qemu-specific directory and has a different meaning of the autoconf "datadir" variable (that's used for the $prefix/share directory, not for $prefix/share/PACKAGE). This doesn't change behavior or interfaces, it's just an internal variable rename. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-24target-microblaze: QOM'ify CPU initAndreas Färber
Move code from cpu_mb_init() to a QOM initfn. Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com> [AF: Leave cpu_reset() call in cpu_mb_init()]
2012-04-24target-microblaze: QOM'ify CPU resetAndreas Färber
Move code from cpu_state_reset() to QOM mb_cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
2012-04-24target-microblaze: QOM'ify CPUAndreas Färber
Embed CPUMBState as first member of QOM MicroBlazeCPU. Let CPUClass::reset() call cpu_state_reset() for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com> [AF: Updated cpu.c to include cpu-qom.h indirectly via cpu.h]
2012-04-24target-cris: Start QOM'ifying CPU initAndreas Färber
Move VR-independent code from cpu_cris_init() into an initfn. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-24target-cris: QOM'ify CPU resetAndreas Färber
Move code from cpu_state_reset() into QOM cris_cpu_reset(). Let CPU init call cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-24target-cris: QOM'ify CPUAndreas Färber
Embed CPUCRISState as first member of QOM CRISCPU. Let CPUClass::reset() call cpu_state_reset() for now. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-23Merge remote-tracking branch 'origin/master' into stagingAnthony Liguori
* origin/master: qtest: fix memread and memwrite on 32 bit hosts
2012-04-23Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori
* qmp/queue/qmp: qapi: g_hash_table_find() instead of GHashTableIter. qmp: make block job command naming consistent
2012-04-23qtest: fix memread and memwrite on 32 bit hostsBlue Swirl
Use PRIx64 to print 64 bit values to avoid truncation on 32 bit hosts. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-23Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
* kwolf/for-anthony: (38 commits) qemu-iotests: Fix test 031 for qcow2 v3 support qemu-iotests: Add -o and make v3 the default for qcow2 qcow2: Zero write support qemu-iotests: Test backing file COW with zero clusters qemu-iotests: add a simple test for write_zeroes qcow2: Support for feature table header extension qcow2: Support reading zero clusters qcow2: Version 3 images qcow2: Ignore reserved bits in check_refcounts qcow2: Ignore reserved bits in refcount table entries qcow2: Simplify count_cow_clusters qcow2: Refactor qcow2_free_any_clusters qcow2: Ignore reserved bits in L1/L2 entries qcow2: Fail write_compressed when overwriting data qcow2: Ignore reserved bits in count_contiguous_clusters() qcow2: Ignore reserved bits in get_cluster_offset qcow2: Save disk size in snapshot header Specification for qcow2 version 3 qcow2: Fix refcount block allocation during qcow2_alloc_cluster_at() iotests: Resolve test failures caused by hostname ...
2012-04-23Merge remote-tracking branch 'origin/master' into stagingAnthony Liguori
* origin/master: fix BCD mask for date (Solaris 2.5 guest hang fix)
2012-04-23fix BCD mask for date (Solaris 2.5 guest hang fix)Artyom Tarasenko
Fix BCD mask for date. The most visible effect of this patch is Solaris 2.5.1 doesn't hang at boot if the day of month is >21. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-23Merge remote-tracking branch 'origin/master' into stagingAnthony Liguori
* origin/master: (27 commits) target-arm: Move reset handling to arm_cpu_reset target-arm: Drop cpu_reset_model_id() target-arm: Move cache ID register setup to cpu specific init fns target-arm: Move OMAP cp15_i_{max,min} reset to cpu_state_reset target-arm: Move feature register setup to per-CPU init fns target-arm: Move iWMMXT wCID reset to cpu_state_reset target-arm: Drop JTAG_ID documentation target-arm: Move SCTLR reset value setup to per cpu init fns target-arm: Move CTR setup to per cpu init fns target-arm: Move MVFR* setup to per cpu init fns target-arm: Move FPSID config to cpu init fns target-arm: Move feature bit settings to CPU init fns target-arm: Add QOM subclasses for each ARM cpu implementation target-arm: remind to keep arm features in sync with linux-user/elfload.c tci: GETPC() macro must return an uintptr_t gdbstub: Synchronize CPU state unconditionally in gdb_set_cpu_pc softfloat: make USE_SOFTFLOAT_STRUCT_TYPES compile target-xtensa: add tests for LOOPNEZ and LOOPGTZ target-xtensa: fix LOOPNEZ/LOOPGTZ translation qtest: add m48t59 tests for Sparc ...
2012-04-23qapi: g_hash_table_find() instead of GHashTableIter.NODA, Kai
GHashTableIter was first introduced in glib 2.16. This patch removes it in favor of older g_hash_table_find() for better compatibility with RHEL5. Signed-off-by: NODA, Kai <nodakai@gmail.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-04-23qmp: make block job command naming consistentStefan Hajnoczi
The block streaming and job commands used '_' instead of '-' for reasons of compatibility with libvirt, which already included support for the '_' naming. However, the semantics of block_job_cancel have changed and libvirt now needs to handle the new semantics. Since the old semantics were never in a QEMU release we can still rename the commands to use '-' instead of '_'. Libvirt is also happy because the new name can be used to distinguish QEMU binaries that support the latest block-job-cancel semantics from those that include a downstream block_job_cancel command. Therefore, let's apply the QAPI/QMP naming rules to the block streaming and job commands. QEMU 1.1 will be the first release with these commands so no upstream users can break. Note that HMP commands are left with '_' because that is the convention there. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-04-23Merge remote-tracking branch 'sstabellini/build_fix' into stagingAnthony Liguori
* sstabellini/build_fix: xen: add a dummy xc_hvm_inject_msi for Xen < 4.2 xen,configure: detect Xen 4.2
2012-04-23Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
* stefanha/trivial-patches: Add .gitignore for tests/ e1000: Fix spelling (segmentaion -> segmentation) in debug output spice-qemu-char.c: Show what name is unsupported pflash_cfi01: remove redundant line qxl: Add missing GCC_FMT_ATTR and fix format specifier fix block_job_set_speed name in documentation error.c: don't return value for void function
2012-04-23Merge remote-tracking branch 'mdroth/qga-pull-4-19-12' into stagingAnthony Liguori
* mdroth/qga-pull-4-19-12: qemu-ga: fix help output qemu-ga: generate missing stubs for fsfreeze
2012-04-23Merge remote-tracking branch 'bonzini/nbd-next' into stagingAnthony Liguori
* bonzini/nbd-next: nbd: obey FUA on reads nbd: do not include block_int.h nbd: do not block in nbd_wr_sync if no data at all is available nbd: consistently return negative errno values nbd: consistently check for <0 or >=0 nbd: consistently use ssize_t nbd: avoid out of bounds access to recv_coroutine array
2012-04-23Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori
* bonzini/scsi-next: scsi: add SANITIZE command SCSI emulation: should tell the guest that we actually support thin provisioning SCSI emulation: Support unmap via WRITE_SAME_10. scsi: advertise DPOFUA scsi: small refactoring of MMC mode-sense scsi: support FUA on reads scsi: add a started field to SCSIDiskReq scsi: force unit access on VERIFY scsi: add support for FUA on writes scsi: move scsi_flush_complete around scsi: make code more homogeneous in AIO callback functions scsi: add missing test for cancelled request virtio-scsi: add multiqueue capability virtio: add virtio_queue_get_id virtio-scsi: prepare migration format for multiqueue scsi: fix memory leak
2012-04-23Merge remote-tracking branch 'stefanha/tracing' into stagingAnthony Liguori
* stefanha/tracing: tracetool: handle DTrace keywords 'in', 'next', 'self' tracetool: Add MAINTAINERS info tracetool: Add support for the 'dtrace' backend tracetool: Add support for the 'ust' backend tracetool: Add support for the 'simple' backend tracetool: Add support for the 'stderr' backend tracetool: Add module for the 'h' format tracetool: Add module for the 'c' format tracetool: Rewrite infrastructure as python modules
2012-04-21target-arm: Move reset handling to arm_cpu_resetPeter Maydell
Now that cpu_reset_model_id() has gone we can move the reset code over to the class reset function and have cpu_state_reset simply do a reset on the CPU QOM object. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Drop cpu_reset_model_id()Peter Maydell
cpu_reset_model_id() is now empty and we can remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Move cache ID register setup to cpu specific init fnsPeter Maydell
Move cache ID register reset out of cpu_reset_model_id() by creating a field for the reset value in ARMCPU and setting it up in the cpu specific init functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Move OMAP cp15_i_{max,min} reset to cpu_state_resetPeter Maydell
Move the OMAP-specific cp15_i_{max,min} reset to cpu_state_reset; since these registers are only accessible on CPUs with the OMAPCP feature set there's no need to guard this reset with either a CPUID or feature bit check. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Move feature register setup to per-CPU init fnsPeter Maydell
Move feature register value setup to per-CPU init functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Move iWMMXT wCID reset to cpu_state_resetPeter Maydell
Move the iWMMXT wCID reset to cpu_state_reset(). Since we use the same value for all CPUs with this feature (with the major/minor revision fields set to the QEMU specific 'Q' value) there's no need to create an ARMCPU field just for this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Drop JTAG_ID documentationPeter Maydell
None of the machines in QEMU offer a JTAG debug interface, so this info was unused. Further, the PXA250 ID contradicts the February 2002 Developer's Manual, which has it as 0xn9264013 with n the MIDR Revision. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-04-21target-arm: Move SCTLR reset value setup to per cpu init fnsPeter Maydell
Move the reset value of SCTLR to ARMCPU, initialised in the per-cpu init functions. It can then be reset by a simple copy, and we can drop the code from cpu_reset_model_id(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Move CTR setup to per cpu init fnsPeter Maydell
Move CTR (cache type register) value to an ARMCPU field set up by per-cpu init fns. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Move MVFR* setup to per cpu init fnsPeter Maydell
Move the MVFR* VFP feature register values to ARMCPU, so they are set up by the implementation-specific instance init functions rather than in cpu_reset_model_id(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Move FPSID config to cpu init fnsPeter Maydell
Move the reset FPSID to the ARMCPU struct, and set it in the per-implementation instance init function. At reset we then just copy the reset value into the CPUARMState field. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Move feature bit settings to CPU init fnsPeter Maydell
Move the setting of the feature bits from cpu_reset_model_id() to each CPU's instance init function. This requires us to move the features field in CPUARMState so that it is not cleared on reset. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Add QOM subclasses for each ARM cpu implementationPeter Maydell
Register subclasses for each ARM CPU implementation. Let arm_cpu_list() enumerate CPU subclasses in alphabetical order, except for special value "any". Replace cpu_arm_find_by_name()'s string -> CPUID lookup by storing the CPUID (aka MIDR, Main ID Register) value in the class. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-04-21target-arm: remind to keep arm features in sync with linux-user/elfload.cBenoit Canet
Signed-off-by: Benoit Canet <benoit.canet@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-04-21Merge branch 'arm-devs.for-upstream' of ↵Blue Swirl
git://git.linaro.org/people/pmaydell/qemu-arm * 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm: versatiblepb: add NOR flash support hw/arm_mptimer: Reset the qemu_timer at reset versatilepb: add ds1338 rtc device realview: break out versatile i2c controller code
2012-04-21tci: GETPC() macro must return an uintptr_tStefan Weil
Change the data type of tci_tb_ptr, so GETPC() returns an uintptr_t now (like for all other TCG targets). This completes commit 2050396801ca0c8359364d61eaadece951006057 and fixes builds with TCI. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-21gdbstub: Synchronize CPU state unconditionally in gdb_set_cpu_pcPeter Maydell
Synchronize the CPU state via cpu_sychronize_state() unconditionally in gdb_set_cpu_pc() rather than only in some of the target ifdef ladder cases. We can divide the CPUs into three categories: * non-KVM targets: no change of behaviour since we will use the kvm-stub.c no-op function. * i386 and s390: no change of behaviour since they were already calling this function * PPC (in KVM mode): this fixes an error: failing to synchronise was accidental and probably a bug. This also paves the way for other targets (specifically ARM) which can add KVM support in future without having to add another target specific change to this bit of code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>