aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-09-11Merge remote-tracking branch ↵Peter Maydell
'remotes/mjt/tags/pull-trivial-patches-2015-09-11' into staging trivial patches for 2015-09-11 # gpg: Signature made Fri 11 Sep 2015 12:02:43 BST using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" * remotes/mjt/tags/pull-trivial-patches-2015-09-11: (26 commits) virtio-vga: enable for i386 hw/arm/spitz: Remove meaningless blank Property hw/gpio/zaurus: Remove meaningless blank Property hw/virtio/virtio-pci: Remove meaningless blank Property hw/s390x/s390-virtio-bus: Remove meaningless blank Property typofixes - v4 qapi-schema: remove legacy<> from doc disas/microblaze: Remove unused code help: dd missing newline Target-ppc: Remove unnecessary variable baum: Fix build with debugging enabled linux-user: Fix warnings caused by missing 'static' attribute opts: produce valid command line in qemu_opts_print docs: fix a qga/qapi-schema.json comment trivial: remove trailing newline from error_report maint: avoid useless "if (foo) free(foo)" pattern maint: avoid useless "if (foo) free(foo)" pattern maint: remove unused include for strings.h maint: remove unused include for signal.h maint: remove unused include for dirent.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-11virtio-vga: enable for i386Gerd Hoffmann
This one just syncs x86_64 and i386. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: qemu-trivial@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11hw/arm/spitz: Remove meaningless blank PropertyShannon Zhao
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11hw/gpio/zaurus: Remove meaningless blank PropertyShannon Zhao
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11hw/virtio/virtio-pci: Remove meaningless blank PropertyShannon Zhao
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11hw/s390x/s390-virtio-bus: Remove meaningless blank PropertyShannon Zhao
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11typofixes - v4Veres Lajos
Signed-off-by: Veres Lajos <vlajos@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11qapi-schema: remove legacy<> from docMarc-André Lureau
The legacy<> type is no longer used since 7ce7ffe02. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11disas/microblaze: Remove unused codeStefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11help: dd missing newlineLaurent Vivier
Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11Target-ppc: Remove unnecessary variableShraddha Barke
Compress lines and remove the variable ret. Change made using Coccinelle script @@ expression ret; @@ - if (ret) return ret; - return 0; + return ret; @@ local idexpression ret; expression e; @@ - ret = e; - return ret; + return e; @@ type T; identifier i; @@ - T i; ... when != i Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11baum: Fix build with debugging enabledSamuel Thibault
cur and buf are pointers, so the difference is a ptrdiff_t Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11linux-user: Fix warnings caused by missing 'static' attributeStefan Weil
Warnings from the Sparse static analysis tool: linux-user/main.c:40:12: warning: symbol 'filename' was not declared. Should it be static? linux-user/main.c:41:12: warning: symbol 'argv0' was not declared. Should it be static? linux-user/main.c:42:5: warning: symbol 'gdbstub_port' was not declared. Should it be static? linux-user/main.c:43:11: warning: symbol 'envlist' was not declared. Should it be static? Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11opts: produce valid command line in qemu_opts_printKővágó, Zoltán
This will let us print options in a format that the user would actually write it on the command line (foo=bar,baz=asd,etc=def), without prepending a spurious comma at the beginning of the list, or quoting values unnecessarily. This patch provides the following changes: * write and id=, if the option has an id * do not print separator before the first element * do not quote string arguments * properly escape commas (,) for QEMU Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11docs: fix a qga/qapi-schema.json commentMarc-André Lureau
For consistency with the rest of the comment blocks. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11trivial: remove trailing newline from error_reportJohn Snow
Minor cleanup. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: avoid useless "if (foo) free(foo)" patternMarkus Armbruster
My Coccinelle semantic patch finds a few more, because it also fixes up the equally pointless conditional if (foo) { free(foo); foo = NULL; } Result (feel free to squash it into your patch): Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: avoid useless "if (foo) free(foo)" patternDaniel P. Berrange
The free() and g_free() functions both happily accept NULL on any platform QEMU builds on. As such putting a conditional 'if (foo)' check before calls to 'free(foo)' merely serves to bloat the lines of code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove unused include for strings.hDaniel P. Berrange
A number of files were including strings.h but not using any of the functions it provides Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove unused include for signal.hDaniel P. Berrange
A number of files were including signal.h but not using any of the functions it provides Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove unused include for dirent.hDaniel P. Berrange
A number of files were including dirent.h but not using any of the functions it provides Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove unused include for assert.hDaniel P. Berrange
A number of files were including assert.h but not using any of the functions it provides Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove / fix many doubled wordsDaniel P. Berrange
Many source files have doubled words (eg "the the", "to to", and so on). Most of these can simply be removed, but a couple were actual mis-spellings (eg "to to" instead of "to do"). There was even one triple word score "to to to" :-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove double semicolons in many filesDaniel P. Berrange
A number of source files have statements accidentally terminated by a double semicolon - eg 'foo = bar;;'. This is harmless but a mistake none the less. The tcg/ia64/tcg-target.c file is whitelisted because it has valid use of ';;' in a comment containing assembly code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11i6300esb: fix timer overflowLaurent Vivier
We use muldiv64() to compute the time to wait: timeout = muldiv64(get_ticks_per_sec(), timeout, 33000000); but get_ticks_per_sec() is 10^9 (30 bit value) and timeout is a 35 bit value. Whereas muldiv64 is: uint64_t muldiv64(uint64_t a, uint32_t b, uint32_t c) So we loose 3 bits of timeout. Swapping get_ticks_per_sec() and timeout fixes it. We can also replace it by a multiplication by 30 ns, but this changes PCI clock frequency from 33MHz to 33.333333MHz and we need to do this on all the QEMU PCI devices (later...) Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11Trivial: fix commandline help messageAndrey Korolyov
Fix obvious typo in printed help for qemu-nbd. Signed-off-by: Andrey Korolyov <andrey@xdel.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11Update language files for QEMU 2.4.0Stefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-10Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2015-09-10-tag' ↵Peter Maydell
into staging xen-2015-09-10 # gpg: Signature made Thu 10 Sep 2015 17:52:08 BST using RSA key ID 70E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" * remotes/sstabellini/tags/xen-2015-09-10-tag: (29 commits) xen/pt: Don't slurp wholesale the PCI configuration registers xen/pt: Check for return values for xen_host_pci_[get|set] in init xen/pt: Move bulk of xen_pt_unregister_device in its own routine. xen/pt: Make xen_pt_unregister_device idempotent xen/pt: Log xen_host_pci_get/set errors in MSI code. xen/pt: Log xen_host_pci_get in two init functions xen/pt: Remove XenPTReg->data field. xen/pt: Check if reg->init function sets the 'data' past the reg->size xen/pt: Sync up the dev.config and data values. xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config xen/pt: Use XEN_PT_LOG properly to guard against compiler warnings. xen/pt/msi: Add the register value when printing logging and error messages xen: use errno instead of rc for xc_domain_add_to_physmap xen/pt: xen_host_pci_config_read returns -errno, not -1 on failure xen/pt: Make xen_pt_msi_set_enable static xen/pt: Update comments with proper function name. xen/HVM: atomically access pointers in bufioreq handling xen-hvm: When using xc_domain_add_to_physmap also include errno when reporting xen, gfx passthrough: add opregion mapping xen, gfx passthrough: register host bridge specific to passthrough ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-10xen/pt: Don't slurp wholesale the PCI configuration registersKonrad Rzeszutek Wilk
Instead we have the emulation registers ->init functions which consult the host values to see what the initial value should be and they are responsible for populating the dev.config. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Check for return values for xen_host_pci_[get|set] in initKonrad Rzeszutek Wilk
and if we have failures we call xen_pt_destroy introduced in 'xen/pt: Move bulk of xen_pt_unregister_device in its own routine.' and free all of the allocated structures. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Move bulk of xen_pt_unregister_device in its own routine.Konrad Rzeszutek Wilk
This way we can call it if we fail during init. This code movement introduces no changes. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Make xen_pt_unregister_device idempotentKonrad Rzeszutek Wilk
To deal with xen_host_pci_[set|get]_ functions returning error values and clearing ourselves in the init function we should make the .exit (xen_pt_unregister_device) function be idempotent in case the generic code starts calling .exit (or for fun does it before calling .init!). Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Log xen_host_pci_get/set errors in MSI code.Konrad Rzeszutek Wilk
We seem to only use these functions when de-activating the MSI - so just log errors. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Log xen_host_pci_get in two init functionsKonrad Rzeszutek Wilk
To help with troubleshooting in the field. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Remove XenPTReg->data field.Konrad Rzeszutek Wilk
We do not want to have two entries to cache the guest configuration registers: XenPTReg->data and dev.config. Instead we want to use only the dev.config. To do without much complications we rip out the ->data field and replace it with an pointer to the dev.config. This way we have the type-checking (uint8_t, uint16_t, etc) and as well and pre-computed location. Alternatively we could compute the offset in dev.config by using the XenPTRRegInfo and XenPTRegGroup every time but this way we have the pre-computed values. This change also exposes some mis-use: - In 'xen_pt_status_reg_init' we used u32 for the Capabilities Pointer register, but said register is an an u16. - In 'xen_pt_msgdata_reg_write' we used u32 but should have only use u16. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Check if reg->init function sets the 'data' past the reg->sizeKonrad Rzeszutek Wilk
It should never happen, but in case it does (an developer adds a new register and the 'init_val' expands past the register size) we want to report. The code will only write up to reg->size so there is no runtime danger of the register spilling across other ones - however to catch this sort of thing we still return an error. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Sync up the dev.config and data values.Konrad Rzeszutek Wilk
For a passthrough device we maintain a state of emulated registers value contained within d->config. We also consult the host registers (and apply ro and write masks) whenever the guest access the registers. This is done in xen_pt_pci_write_config and xen_pt_pci_read_config. Also in this picture we call pci_default_write_config which updates the d->config and if the d->config[PCI_COMMAND] register has PCI_COMMAND_MEMORY (or PCI_COMMAND_IO) acts on those changes. On startup the d->config[PCI_COMMAND] are the host values, not what the guest initial values should be, which is exactly what we do _not_ want to do for 64-bit BARs when the guest just wants to read the size of the BAR. Huh you say? To get the size of 64-bit memory space BARs, the guest has to calculate ((BAR[x] & 0xFFFFFFF0) + ((BAR[x+1] & 0xFFFFFFFF) << 32)) which means it has to do two writes of ~0 to BARx and BARx+1. prior to this patch and with XSA120-addendum patch (Linux kernel) the PCI_COMMAND register is copied from the host it can have PCI_COMMAND_MEMORY bit set which means that QEMU will try to update the hypervisor's P2M with BARx+1 value to ~0 (0xffffffff) (to sync the guest state to host) instead of just having xen_pt_pci_write_config and xen_pt_bar_reg_write apply the proper masks and return the size to the guest. To thwart this, this patch syncs up the host values with the guest values taking into account the emu_mask (bit set means we emulate, PCI_COMMAND_MEMORY and PCI_COMMAND_IO are set). That is we copy the host values - masking out any bits which we will emulate. Then merge it with the initial emulation register values. Lastly this value is then copied both in dev.config _and_ XenPTReg->data field. There is also reg->size accounting taken into consideration that ends up being used in patch. xen/pt: Check if reg->init function sets the 'data' past the reg->size This fixes errors such as these: (XEN) memory_map:add: dom2 gfn=fffe0 mfn=fbce0 nr=20 (DEBUG) 189 pci dev 04:0 BAR16 wrote ~0. (DEBUG) 200 pci dev 04:0 BAR16 read 0x0fffe0004. (XEN) memory_map:remove: dom2 gfn=fffe0 mfn=fbce0 nr=20 (DEBUG) 204 pci dev 04:0 BAR16 wrote 0x0fffe0004. (DEBUG) 217 pci dev 04:0 BAR16 read upper 0x000000000. (XEN) memory_map:add: dom2 gfn=ffffffff00000 mfn=fbce0 nr=20 (XEN) p2m.c:883:d0v0 p2m_set_entry failed! mfn=ffffffffffffffff rc:-22 (XEN) memory_map:fail: dom2 gfn=ffffffff00000 mfn=fbce0 nr=20 ret:-22 (XEN) memory_map:remove: dom2 gfn=ffffffff00000 mfn=fbce0 nr=20 (XEN) p2m.c:920:d0v0 gfn_to_mfn failed! gfn=ffffffff00000 type:4 (XEN) p2m.c:920:d0v0 gfn_to_mfn failed! gfn=ffffffff00001 type:4 .. (XEN) memory_map: error -22 removing dom2 access to [fbce0,fbcff] (DEBUG) 222 pci dev 04:0 BAR16 read upper 0x0ffffffff. (XEN) memory_map:remove: dom2 gfn=ffffffff00000 mfn=fbce0 nr=20 (XEN) memory_map: error -22 removing dom2 access to [fbce0,fbcff] [The DEBUG is to illustate what the hvmloader was doing] Also we swap from xen_host_pci_long to using xen_host_pci_get_[byte,word,long]. Otherwise we get: xen_pt_config_reg_init: Offset 0x0004 mismatch! Emulated=0x0000, host=0x2300017, syncing to 0x2300014. xen_pt_config_reg_init: Error: Offset 0x0004:0x2300014 expands past register size(2)! which is not surprising. We read the value as an 32-bit (from host), then operate it as a 16-bit - and the remainder is left unchanged. We end up writing the value as 16-bit (so 0014) to dev.config (as we use proper xen_set_host_[byte,word,long] so we don't spill to other registers) but in XenPTReg->data it is as 32-bit (0x2300014)! It is harmless as the read/write functions end up using an size mask and never modify the bits past 16-bit (reg->size is 2). This patch fixes the warnings by reading the value using the proper size. Note that the check for size is still left in-case the developer sets bits past the reg->size in the ->init routines. The author tried to fiddle with QEMU_BUILD_BUG to make this work but failed. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.configKonrad Rzeszutek Wilk
During init time we treat the dev.config area as a cache of the host view. However during execution time we treat it as guest view (by the generic PCI API). We need to sync Xen's code to the generic PCI API view. This is the first step by replacing all of the code that uses dev.config or pci_get_[byte|word] to get host value to actually use the xen_host_pci_get_[byte|word] functions. Interestingly in 'xen_pt_ptr_reg_init' we also needed to swap reg_field from uint32_t to uint8_t - since the access is only for one byte not four bytes. We can split this as a seperate patch however we would have to use a cast to thwart compiler warnings in the meantime. We also truncated 'flags' to 'flag' to make the code fit within the 80 characters. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-09-10' ↵Peter Maydell
into staging error: On abort, report where the error was created # gpg: Signature made Thu 10 Sep 2015 13:01:39 BST using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2015-09-10: error: On abort, report where the error was created error: Revamp interface documentation error: error_set_errno() is unused, drop qga/vss-win32: Document the DLL requires non-null errp qga: Clean up unnecessarily dirty casts error: Make error_setg() a function error: De-duplicate code creating Error objects Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-10xen/pt: Use XEN_PT_LOG properly to guard against compiler warnings.Konrad Rzeszutek Wilk
If XEN_PT_LOGGING_ENABLED is enabled the XEN_PT_LOG macros start using the first argument. Which means if within the function there is only one user of the argument ('d') and XEN_PT_LOGGING_ENABLED is not set, we get compiler warnings. This is not the case now but with the "xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config" we will hit - so this sync up the function to the rest of them. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt/msi: Add the register value when printing logging and error messagesKonrad Rzeszutek Wilk
We would like to know what the MSI register value is to help in troubleshooting in the field. As such modify the logging logic to include such details in xen_pt_msgctrl_reg_write. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen: use errno instead of rc for xc_domain_add_to_physmapKonrad Rzeszutek Wilk
In Xen 4.6 commit cd2f100f0f61b3f333d52d1737dd73f02daee592 "libxc: Fix do_memory_op to return negative value on errors" made the libxc API less odd-ball: On errors, return value is -1 and error code is in errno. On success the return value is either 0 or an positive value. Since we could be running with an old toolstack in which the Exx value is in rc or the newer, we add an wrapper around the xc_domain_add_to_physmap (called xen_xc_domain_add_to_physmap) which will always return the EXX. Xen 4.6 did not change the libxc functions mentioned (same parameters) so we piggyback on the fact that Xen 4.6 has a new function: commit 504ed2053362381ac01b98db9313454488b7db40 "tools/libxc: Expose new hypercall xc_reserved_device_memory_map" and check for that. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: xen_host_pci_config_read returns -errno, not -1 on failureKonrad Rzeszutek Wilk
However the init routines assume that on errors the return code is -1 (as the libxc API is) - while those xen_host_* routines follow another paradigm - negative errno on return, 0 on success. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Make xen_pt_msi_set_enable staticKonrad Rzeszutek Wilk
As we do not use it outside our code. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Update comments with proper function name.Konrad Rzeszutek Wilk
It has changed but the comments still refer to the old names. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/HVM: atomically access pointers in bufioreq handlingJan Beulich
The number of slots per page being 511 (i.e. not a power of two) means that the (32-bit) read and write indexes going beyond 2^32 will likely disturb operation. The hypervisor side gets I/O req server creation extended so we can indicate that we're using suitable atomic accesses where needed, allowing it to atomically canonicalize both pointers when both have gone through at least one cycle. The Xen side counterpart (which is not a functional prereq to this change, albeit a build one) went in already (commit b7007bc6f9). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen-hvm: When using xc_domain_add_to_physmap also include errno when reportingKonrad Rzeszutek Wilk
.errors - as it will most likely have the proper error value. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen, gfx passthrough: add opregion mappingTiejun Chen
The OpRegion shouldn't be mapped 1:1 because the address in the host can't be used in the guest directly. This patch traps read and write access to the opregion of the Intel GPU config space (offset 0xfc). The original patch is from Jean Guyader <jean.guyader@eu.citrix.com> Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen, gfx passthrough: register host bridge specific to passthroughTiejun Chen
Just register that pci host bridge specific to passthrough. Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen, gfx passthrough: register a isa bridgeTiejun Chen
Currently we just register this isa bridge when we use IGD passthrough in Xen side. Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 17:18:07 +0000