| Age | Commit message (Collapse) | Author |
|---|
|
get_page_addr_code() reads a code tlb entry, but interprets it as an
iotlb entry. This works by accident since the low bits of a RAM code
tlb entry are clear, and match a RAM iotlb entry. This accident is
about to unhappen, so fix the code to use an iotlb entry (using the
code entry with TLB_MMIO may fail if the page is a watchpoint).
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
A step towards eliminating io indices.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
We'd like to store the section index in the iotlb, so we can't
adjust it before returning. Return an unadjusted section and
instead introduce section_addr(), which does the adjustment later.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Xilinx zynq-7000 machine model. Also includes device model for the zynq-specific
system level control register (SLCR) module.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
Device model for cadence gem ethernet controller.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
Implemented cadence Triple Timer Counter (TCC)
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
Implemented cadence UART serial controller
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
Use the -dtb argument for passing is a custom dtb rather than the old
hardcoded "mb.dtb"
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
defined macros for the addresses of the peripherals in machine model
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
This belongs in the machine specific reset function
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
factored out the copy-pasted common boot code from the two microblaze platforms
into a dedicated microblaze bootloader (microblaze_boot.o).
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
* 's390-for-upstream' of git://repo.or.cz/qemu/agraf:
Move helpers.h to helper.h
s390: Rework kernel loading: supports elf and newer kernels
|
|
Provides a file naming scheme consistent with other targets.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This reworks the image loading on s390.
Newer kernels will not always have a 0dd0 (basr 13,0) at address 0x10000.
We must not rely on specific code at certain addresses. This check was
introduced to warn users that tried to load vmlinux, since ELF loading
was not supported. Lets wire that up. If elf loading fails, we assume
that this is a standard kernel image and load that via load_image_targphys.
This patch also changes all other users of load_image to
load_image_targphys to be consistent. (the elf loader registers the kernel
as rom).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Commit e58ac72b6a0 ("ioport: change portio_list not to use
memory_region_set_offset()") started using aliases of I/O memory
regions. Since the IORange used for the I/O was contained in the
target region, the alias information (specifically, the offset
into the region) was lost. This broke -vga std.
Fix by allocating an independent object to hold the IORange and
also the new offset.
Note that I/O memory regions were conceptually broken wrt aliases
in a different way: an alias can cause the same region to appear
twice in an address space, but we had just one IORange to service it.
This patch fixes that problem as well, since we can now have multiple
IORange/MemoryRegion associations.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Previously all callers had a containing object with a destructor that
could be used to trigger cleanup of the IORange objects (typically
just freeing the containing object), but a forthcoming memory API
change doesn't fit this pattern. Rather than setting up a new global
table, extend the ioport system to support destructors.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
The TCG targets i386 and tci needed a change of the function
prototype for w64.
This change is currently not needed here, but it can be applied
to avoid code differences.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
The TCG targets i386 and tci needed a change of the function
prototype for w64.
This change is currently not needed for the other TCG targets,
but it can be applied to avoid code differences.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
flush_icache_range takes two address parameters which must be large
enough to address any address of the host.
For hosts with sizeof(unsigned long) == sizeof(void *), this patch
changes nothing. All currently supported hosts fall into this category.
For w64 hosts, sizeof(unsigned long) is 4 while sizeof(void *) is 8,
so the use of tcg_target_ulong is needed for i386 and tci (the tcg
targets which work with w64).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This change makes tcg_target_ulong available in tcg-target.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
ram_addr_t must be large enough to address any address of the host.
For hosts with sizeof(unsigned long) == sizeof(void *), this patch
changes nothing. All currently supported hosts fall into this category.
For w64 hosts, sizeof(unsigned long) is 4 while sizeof(void *) is 8,
so the use of uintptr_t is needed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
* 'upstream' of git://qemu.weilnetz.de/qemu:
Move definition of HOST_LONG_BITS to qemu-common.h
target-xtensa: Clean includes
target-unicore32: Clean includes
target-sh4: Clean includes
target-s390x: Clean includes
target-ppc: Clean includes
target-mips: Clean includes
target-microblaze: Clean includes
target-m68k: Clean includes
target-lm32: Clean includes
target-i386: Clean includes
target-cris: Clean includes
target-arm: Clean includes
target-alpha: Clean includes
Remove macro HOST_LONG_SIZE
|
|
This was a breakage of 3741715cf2.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
git://git.linaro.org/people/pmaydell/qemu-arm
* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
hw/arm11mpcore: Fix broken realview_mpcore/arm11mpcore_priv properties
arm: add device tree support
arm: make sure that number of irqs can be represented in GICD_TYPER.
arm: clean up GIC constants
|
|
* 'xtensa' of git://jcmvbkbc.spb.ru/dumb/qemu-xtensa:
target-xtensa: add breakpoint tests
target-xtensa: add DEBUG_SECTION to overlay tool
target-xtensa: add DBREAK data breakpoints
exec: let cpu_watchpoint_insert accept larger watchpoints
exec: fix check_watchpoint exiting cpu_loop
exec: add missing breaks to the watch_mem_write
target-xtensa: add ICOUNT SR and debug exception
target-xtensa: implement instruction breakpoints
target-xtensa: add DEBUGCAUSE SR and configuration
target-xtensa: fetch 3rd opcode byte only when needed
target-xtensa: implement info tlb monitor command
target-xtensa: define TLB_TEMPLATE for MMU-less cores
|
|
Fix confusion in the Property arrays for the "arm11mpcore_priv"
(per-CPU devices for the ARM11MPcore CPU) and "realview_mpcore"
(realview-eb board specific device encapsulating CPU and some
extra interrupt controllers) -- the num-irq property was defined
on the wrong device and the mpcore_rirq_properties were defined
as offsets in the wrong structure. The effect was that the
realview-eb-mpcore machine would abort on startup trying to
allocate an insane amount of memory. (This bug was introduced in
the QOM conversion in commit 999e12bb.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
If compiled with CONFIG_FDT, allow user to specify a device tree file using
the -dtb argument. If the machine supports it then the dtb will be loaded
into memory and passed to the kernel on boot.
Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
[Peter Maydell: Use machine opt rather than global to pass dtb filename]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We currently assume that the number of interrupts (ITLinesNumber in
the architecture reference manual) is divisible by 32, since we
present it to the guest when it reads GICD_TYPER (in gic_dist_readb())
as (N / 32) - 1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Interrupts numbers 0-31 are private to the processor interface, 32-1019 are
general interrupts. Add GIC_INTERNAL and substitute everywhere.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[Peter Maydell: converted some tabs to spaces]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
* qemu-kvm/memory/urgent:
kvm: fix unaligned slots
|
|
* qemu-kvm/memory/core: (30 commits)
memory: allow phys_map tree paths to terminate early
memory: unify PhysPageEntry::node and ::leaf
memory: change phys_page_set() to set multiple pages
memory: switch phys_page_set() to a recursive implementation
memory: replace phys_page_find_alloc() with phys_page_set()
memory: simplify multipage/subpage registration
memory: give phys_page_find() its own tree search loop
memory: make phys_page_find() return a MemoryRegionSection
memory: move tlb flush to MemoryListener commit callback
memory: unify the two branches of cpu_register_physical_memory_log()
memory: fix RAM subpages in newly initialized pages
memory: compress phys_map node pointers to 16 bits
memory: store MemoryRegionSection pointers in phys_map
memory: unify phys_map last level with intermediate levels
memory: remove first level of l1_phys_map
memory: change memory registration to rebuild the memory map on each change
memory: support stateless memory listeners
memory: split memory listener for the two address spaces
xen: ignore I/O memory regions
memory: allow MemoryListeners to observe a specific address space
...
|
|
* qemu-kvm/uq/master:
pc-bios: update kvmvapic.bin
kvmvapic: Use optionrom helpers
optionsrom: Reserve space for checksum
kvmvapic: Simplify mp/up_set_tpr
kvmvapic: Introduce TPR access optimization for Windows guests
kvmvapic: Add option ROM
target-i386: Add infrastructure for reporting TPR MMIO accesses
Allow to use pause_all_vcpus from VCPU context
Process pending work while waiting for initial kick-off in TCG mode
Remove useless casts from cpu iterators
kvm: Set cpu_single_env only once
kvm: Synchronize cpu state in kvm_arch_stop_on_emulation_error()
|
|
kvm_set_phys_mem() may be passed sections that are not aligned to a page
boundary. The current code simply brute-forces the alignment which leads
to an inconsistency and an abort().
Fix by aligning the start and the end of the section correctly, discarding
and unaligned head or tail.
This was triggered by a guest sizing a 64-bit BAR that is smaller than a page
with PCI_COMMAND_MEMORY enabled and the upper dword clear.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
* kwolf/for-anthony: (27 commits)
qemu-img: fix segment fault when the image format is qed
qemu-io: fix segment fault when the image format is qed
qemu-tool: revert cpu_get_clock() abort(3)
qemu-iotests: Test rebase with short backing file
qemu-iotests: 026: Reduce output changes for cache=none qcow2
qemu-iotests: Filter out DOS line endings
test: add image streaming tests
qemu-iotests: add iotests Python module
qemu-iotests: export TEST_DIR for non-bash tests
QMP: Add qmp command for blockdev-group-snapshot-sync
qapi: Introduce blockdev-group-snapshot-sync command
qcow2: Reject too large header extensions
qcow2: Fix offset in qcow2_read_extensions
block: drop aio_multiwrite in BlockDriver
block: remove unused fields in BlockDriverState
qcow2: Fix build with DEBUG_EXT enabled
ide: fail I/O to empty disk
fdc: DIR (Digital Input Register) should return status of current drive...
fdc: fix seek command, which shouldn't check tracks
fdc: check if media rate is correct before doing any transfer
...
|
|
* spice/spice.v49:
qxl: properly handle upright and non-shared surfaces
Error out when tls-channel option is used without TLS
spice: use error_report to report errors
qxl: add optinal 64bit vram bar
qxl: make qxl_render_update async
qxl: introduce QXLCookie
qxl: remove flipped
qxl: require spice >= 0.8.2
qxl: drop qxl_spice_update_area_async definition
sdl: remove NULL check, g_malloc0 can't fail
qxl: fix spice+sdl no cursor regression
|
|
* kraxel/usb.39: (21 commits)
usb: Resolve warnings about unassigned bus on usb device creation
usb-redir: Return USB_RET_NAK when we've no data for an interrupt endpoint
usb-redir: Limit return values returned by iso packets
usb-redir: Let the usb-host know about our device filtering
usb-redir: Always clear device state on filter reject
usb-redir: Fix printing of device version
ehci: drop old stuff
usb-ehci: Handle ISO packets failing with an error other then NAK
libcacard: fix reported ATR length
usb-ccid: advertise SELF_POWERED
libcacard: link with glib for g_strndup
usb-desc: fix user trigerrable segfaults (!config)
usb-ehci: sanity-check iso xfers
usb: add tracepoint for usb packet state changes.
usb-xhci: enable packet queuing
usb-uhci: implement packet queuing
usb-uhci: process uhci_handle_td return code via switch.
usb-uhci: add UHCIQueue
usb-uhci: cleanup UHCIAsync allocation & initialization.
usb-ehci: fix reset
...
|
|
[root@f15 qemu]# qemu-img info /home/zwu/work/misc/rh6.img
image: /home/zwu/work/misc/rh6.img
file format: qed
virtual size: 4.0G (4294967296 bytes)
disk size: 1.2G
cluster_size: 65536
Segmentation fault (core dumped)
Today when i were fixing another issue, i found this issue; After simple
investigation, i found that the required clock vm_clock is not created
for qemu tool.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
[root@f15 qemu]# qemu-io -c info /home/zwu/work/misc/rh6.img
format name: qed
cluster size: 64 KiB
vm state offset: 0.000000 bytes
Segmentation fault (core dumped)
This reason is same as the former patch
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Despite the fact that the qemu-tool environment has no guest running and
vm_clock therefore does not make sense, there is code that gets the
vm_clock time even in qemu-tool. Therefore, revert the abort(3) call
and just return 0 like we used to. This unbreaks qemu-img/qemu-io with
QED and Kevin has also expressed interest in this for qcow2.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This tests that qemu-img rebase doesn't assume that the backing file has
the same size as the image, but considers that it can be smaller.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
qemu-iotests supports the -nocache option which makes the tests run with
cache=none. For blkdebug tests with qcow2 this means that we may see
test results that differ from cache=writethrough. This patch makes the
diff a bit smaller and therefore easier to review.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
This one makes it possible to run qemu-iotests on a Windows build using Wine
and get somewhat meaningful results.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
This patch adds a test suite for the image streaming feature. It
exercises the 'block_stream', 'block_job_cancel', 'block_job_set_speed',
and 'query-block-jobs' QMP commands.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Block layer tests that involve QMP commands rather than qemu-img or
qemu-io are not well-suited for shell scripting. This patch adds a
Python module which allows tests to be written in Python instead.
The basic API is:
VM - class for launching and interacting with a VM
QMPTestCase - abstract base class for tests that use QMP
qemu_img() - wrapper function for invoking qemu-img
qemu_io() - wrapper function for invoking qemu-io
imgfmt - the image format under test (e.g. qcow2, qed)
test_dir - scratch directory path for temporary files
main() - entry point for running tests
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Since qemu-iotests may need to create large image files it is possible
to specify the test directory. The TEST_DIR variable needs to be
exported so non-bash tests can make use of it.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds the QMP command for blockdev-group-snapshot-sync. It
takes an array in as the input, for the argument devlist. The
array consists of the following elements:
+ device: device to snapshot. e.g. "ide-hd0", "virtio0"
+ snapshot-file: path & file for the snapshot image. e.g. "/tmp/file.img"
+ format: snapshot format. e.g., "qcow2". Optional
There is no HMP equivalent for the command.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is a QAPI/QMP only command to take a snapshot of a group of
devices. This is similar to the blockdev-snapshot-sync command, except
blockdev-group-snapshot-sync accepts a list devices, filenames, and
formats.
It is attempted to keep the snapshot of the group atomic; if the
creation or open of any of the new snapshots fails, then all of
the new snapshots are abandoned, and the name of the snapshot image
that failed is returned. The failure case should not interrupt
any operations.
Rather than use bdrv_close() along with a subsequent bdrv_open() to
perform the pivot, the original image is never closed and the new
image is placed 'in front' of the original image via manipulation
of the BlockDriverState fields. Thus, once the new snapshot image
has been successfully created, there are no more failure points
before pivoting to the new snapshot.
This allows the group of disks to remain consistent with each other,
even across snapshot failures.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
