aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-17xen: add vkbd support for PV on HVM guestsStefano Stabellini
Register the vkbd backend even when running as device emulator for HVM guests: it is useful because it doesn't need a frequent timer like usb. Check whether the XenInput DisplayState has been set in the initialise state, rather than the input state. In case the DisplayState hasn't been set and there is no vfb for this domain, then set the XenInput DisplayState to the default one. Changed in v2: - use qemu_free instead of free; Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen_console: fix memory leakStefano Stabellini
con_init leaks the string "type", fix it. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen: enable console and disk backend in HVM modeStefano Stabellini
Initialize the Xen console backend and the Xen disk backend even when running in HVM mode so that PV on HVM drivers can connect to them. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen: Fold CONFIG_XEN_MAPCACHE into CONFIG_XENJan Kiszka
Xen won't be enabled if there is no backend support available for the host. And that also means the map cache will work. So drop the separate config switch and move the required stubs over to xen-stub.c. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen: Clean up map cache API namingJan Kiszka
The map cache is a Xen thing, so its API should make this clear. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen: Clean up build systemJan Kiszka
Introduce CONFIG_XEN_BACKEND so that this new config solely controls the target-independent backend build and CONFIG_XEN can focus on per-target building. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-16Fix signal handling of SIG_IPI when io-thread is enabledAlexandre Raymond
Both the signal thread (via sigwait()) and the cpu thread (via a normal signal handler) were attempting to catch SIG_IPI. This resulted in random freezes under Darwin. This patch separates SIG_IPI from the rest of the signals handled by the signal thread, because it is independently caught by the cpu thread. Signed-off-by: Alexandre Raymond <cerbere@gmail.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-16Fix signal handling when io-thread is disabledAlexandre Raymond
Changes since v1: - take pthread_sigmask() out of the ifdef as it is now common to both parts. This fix effectively blocks, in the main thread, the signals handled by signalfd or the compatibility signal thread. This way, such signals are received synchronously in the main thread through sigfd_handler() instead of triggering the signal handler directly, asynchronously. Signed-off-by: Alexandre Raymond <cerbere@gmail.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-16tcg/README: Expand advice on number of TCG ops per target insnPeter Maydell
Expand the note on the number of TCG ops generated per target insn, to be clearer about the range of applicability of the 20 op rule of thumb. Also add a note about the hard MAX_OP_PER_INSTR limit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14set ELF_HWCAP for SPARC and SPARC64Artyom Tarasenko
setting ELF_HWCAP fixes dynamic library loading for Linux/sparc64 This patch allows loading busybox from Debian 6 initrd Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14Sparc: fix FPU and AM enable checks for translationBlue Swirl
Translation used incorrectly CPUState fields directly to check for FPU enable state and 32 bit address masking on Sparc64. Fix by using TB flags instead. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: C99 comment fix for block-transfer ASIsTsuneo Saito
Fixed C99 comments on block-tranfer ASIs. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: Add JPS1 ASI_BLK_AIU[PS]L ASIs for ldfa and stfaTsuneo Saito
Support JPS1 little endian block transfer ASIs. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: Add UA2007 ASI_BLK_AIU[PS]L? ASIs for stfaTsuneo Saito
Support UA2007 block store ASIs for stfa instructions. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: Add UA2007 ASI_BLK_AIU[PS]L? ASIs for ldfaTsuneo Saito
Support UA2007 block load ASIs for ldfa instructions. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: fp_disabled checks on stfa/stdfa/stqfaTsuneo Saito
stfa/stdfa/stqfa instructions should raise fp_disabled exceptions if %pstate.PEF==0 or %fprs.FEF==0. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: Implement stfa/stdfa/stqfa instrcutions properlyTsuneo Saito
This patch implements sparcv9 stfa/stdfa/stqfa instructions with non block-store ASIs. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: fp_disabled checks on ldfa/lddfa/ldqfaTsuneo Saito
ldfa/lddfa/ldqfa instructions should raise fp_disabled exceptions if %pstate.PEF==0 or %fprs.FEF==0. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: Implement ldfa/lddfa/ldqfa instructions properlyTsuneo Saito
This patch implements sparcv9 ldfa/lddfa/ldqfa instructions with non block-load ASIs. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12os-posix: set groups properly for -runasStefan Hajnoczi
Andrew Griffiths reports that -runas does not set supplementary group IDs. This means that gid 0 (root) is not dropped when switching to an unprivileged user. Add an initgroups(3) call to use the -runas user's /etc/groups membership to update the supplementary group IDs. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12esp: cancel current request only if some request is in flightHervé Poussineau
This bug was introduced in 94d3f98a3f3caddd7875f9a11776daeb84962a7b: scsi_cancel_io was checking if some request was pending before trying to cancel it, while scsi_req_cancel always cancels the request. This may lead to a crash of Qemu due to dereferencing a NULL pointer, as exhibited by NetBSD 5.1 installer on MIPS Magnum emulation. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12target-alpha, target-ppc: Remove unnecessary setjmp.h includePeter Maydell
Remove the include of setjmp.h from the cpu.h of target-alpha and target-ppc. This is unnecessary because cpu-defs.h already includes this header; this change brings these two targets into line with all the rest. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12Remove unneeded setjmp.h (fix compilation on Debian "lenny")Stefan Weil
Some versions of png.h cannot be included after setjmp.h, even when PNG_SKIP_SETJMP_CHECK was defined. setjmp.h was included from qemu-common.h and is not needed there. Removing the include statement fixes compilation of ui/vnc-enc-tight.c with CONFIG_VNC_PNG defined. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12tcg: Reload local variables after return from longjmpJan Kiszka
Recent compilers look deep into cpu_exec, find longjmp as a noreturn function and decide to smash some stack variables as they won't be used again. This may lead to env becoming invalid after return from setjmp, causing crashes. Fix it by reloading env from cpu_single_env in that case. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12exec-all.h: Make MAX_OP_PER_INSTR large enough for target-arm's usesPeter Maydell
The target-arm frontend's worst-case TCG ops per instr is 194 (and in general many of the "load multiple registers" ARM instructions generate more than 100 TCG ops). Raise MAX_OP_PER_INSTR accordingly to avoid possible buffer overruns. Since it doesn't make any sense for the "64 bit guest on 32 bit host" case to have a smaller limit than the normal case, we collapse the two cases back into each other again. (This increase costs us about 14K in extra static buffer space and 21K of extra margin at the end of a 32MB codegen buffer.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12exec.c: Fix calculation of code_gen_buffer_max_sizePeter Maydell
When calculating the point at which we should not try to put another TB into the code gen buffer, we have to allow not just for OPC_MAX_SIZE but OPC_BUF_SIZE. This is because the target translate.c will only stop when an instruction has put it past the OPC_MAX_SIZE limit, so we have to include the MAX_OP_PER_INSTR margin which that final insn might have used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12spapr: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12s390-virtio: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12ppc405_uc: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12pl080: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12msix: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12msi: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12intel-hda: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12hpet: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12exec: add endian specific phys ld/st functionsAlexander Graf
Device code some times needs to access physical memory and does that through the ld./st._phys functions. However, these are the exact same functions that the CPU uses to access memory, which means they will be endianness swapped depending on the target CPU. However, devices don't know about the CPU's endianness, but instead access memory directly using their own interface to the memory bus, so they need some way to read data with their native endianness. This patch adds _le and _be functions to ld./st._phys. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-05ide: Initialise buffers with zerosKevin Wolf
Just in case there's still a way how a guest can read out buffers when it's not supposed to, let's zero the buffers during initialisation so that we don't leak information to the guest. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2011-07-05ide: Ignore reads during PIO in and writes during PIO outKevin Wolf
This fixes https://bugs.launchpad.net/qemu/+bug/786209: When the DRQ_STAT bit is set, the IDE core permits both data reads and data writes, regardless of whether the current transfer was initiated as a read or write. This potentially leaks uninitialized host memory into the guest, if, before doing anything else to an IDE device, the guest begins a write transaction (e.g. WIN_WRITE), but then *reads* from the IO port instead of writing to it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2011-07-05block: drive_init(): Improve CHS setting error messageLuiz Capitulino
The current message doesn't clearly communicate the error cause. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-05block: drive_init(): Simplify interface type settingLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-05virtio-blk: Turn drive serial into a qdev propertyMarkus Armbruster
It needs to be a qdev property, because it belongs to the drive's guest part. Precedence: commit a0fef654 and 6ced55a5. Bonus: info qtree now shows the serial number. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-05block/raw-posix: Linux compat-ioctl warning workaroundJohannes Stezenbach
On Linux x86_64 host with 32bit userspace, running qemu or even just "qemu-img create -f qcow2 some.img 1G" causes a kernel warning: ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(00005326){t:'S';sz:0} arg(7fffffff) on some.img ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(fff77350) on some.img ioctl 00005326 is CDROM_DRIVE_STATUS, ioctl 801c0204 is FDGETPRM. The warning appears because the Linux compat-ioctl handler for these ioctls only applies to block devices, while qemu also uses the ioctls on plain files. Work around by calling fstat() the ensure the ioctls are only used on block devices. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-05qemu-img: Add cache command line optionFederico Simoncelli
qemu-img currently writes disk images using writeback and filling up the cache buffers which are then flushed by the kernel preventing other processes from accessing the storage. This is particularly bad in cluster environments where time-based algorithms might be in place and accessing the storage within certain timeouts is critical. This patch adds the option to choose a cache method when writing disk images. Signed-off-by: Federico Simoncelli <fsimonce@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-05Documentation: Remove outdated host_device noteKevin Wolf
People shouldn't explicitly specify host_device any more. raw is doing the Right Thing. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-04pxa2xx_lcd: add proper rotation supportVasily Khoruzhick
Until now, pxa2xx_lcd only supported 90deg rotation, but some machines (for example Zipit Z2) needs 270deg rotation. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-04arm: Add const attribute to some arm_boot_info pointersStefan Weil
Parameter 'info' is const, so add the missing attribute. v2: Add 'const' to the local variable info in do_cpu_reset() and to the boot_info field in CPUARMState (suggested by Peter Maydell). Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-02esp: correctly fill bus id with requested lunHervé Poussineau
This bug showed up after 1455084ea2c48abf23c4e4e15e378ee43457f381, and may be seen only on operating systems *not* using DMA to give commands to SCSI adapter. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-02TCG/PPC: use stack for TCG tempsBlue Swirl
Use stack instead of temp_buf array in CPUState for TCG temps. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-01fix cpu_cc_src and cpu_cc_src2 corruption in udivx and sdivxArtyom Tarasenko
udivx and sdvix don't modify condition flags, so they shall not overwrite cpu_cc_* Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-01Merge branch 'ppc-next' of git://repo.or.cz/qemu/agrafBlue Swirl
* 'ppc-next' of git://repo.or.cz/qemu/agraf: PPC: move TLBs to their own arrays PPC: 440: Use 440 style MMU as default, so Qemu knows the MMU type PPC: E500: Use MAS registers instead of internal TLB representation PPC: Only set lower 32bits with mtmsr PPC: update openbios firmware PPC: mpc8544ds: Add hypervisor node PPC: calculate kernel,initrd,cmdline locations dynamically target-ppc: Handle memory-forced I/O controller access PPC: E500: Implement reboot controller
2011-07-01tcg-hppa: Support deposit opcode.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 04:01:04 +0000