aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-03ide: Update ide_drive_get to be HBA agnosticJohn Snow
Instead of duplicating the logic for the if_ide (bus,unit) mappings, rely on the blockdev layer for managing those mappings for us, and use the drive_get_by_index call instead. This allows ide_drive_get to work for AHCI HBAs as well, and can be used in the Q35 initialization. Lastly, change the nature of the argument to ide_drive_get so that represents the number of total drives we can support, and not the total number of buses. This will prevent array overflows if the units-per-default-bus property ever needs to be adjusted for compatibility reasons. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1412187569-23452-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03pc/vl: Add units-per-default-bus propertyJohn Snow
This patch adds the 'units_per_default_bus' property which allows individual boards to declare their desired index => (bus,unit) mapping for their default HBA, so that boards such as Q35 can specify that its default if_ide HBA, AHCI, only accepts one unit per bus. This property only overrides the mapping for drives matching the block_default_type interface. This patch also adds this property to *all* past and present Q35 machine types. This retroactive addition is justified because the previous erroneous index=>(bus,unit) mappings caused by lack of such a property were not utilized due to lack of initialization code in the Q35 init routine. Further, semantically, the Q35 board type has always had the property that its default HBA, AHCI, only accepts one unit per bus. The new code added to add devices to drives relies upon the accuracy of this mapping. Thus, the property is applied retroactively to reduce complexity of allowing IDE HBAs with different units per bus. Examples: Prior to this patch, all IDE HBAs were assumed to use 2 units per bus (Master, Slave). When using Q35 and AHCI, however, we only allow one unit per bus. -hdb foo.qcow2 would become index=1, or bus=0,unit=1. -hdd foo.qcow2 would become index=3, or bus=1,unit=1. -drive file=foo.qcow2,index=5 becomes bus=2,unit=1. These are invalid for AHCI. They now become, under Q35 only: -hdb foo.qcow2 --> index=1, bus=1, unit=0. -hdd foo.qcow2 --> index=3, bus=3, unit=0. -drive file=foo.qcow2,index=5 --> bus=5,unit=0. The mapping is adjusted based on the fact that the default IF for the Q35 machine type is IF_IDE, and units-per-default-bus overrides the IDE mapping from its default of 2 units per bus to just 1 unit per bus. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1412187569-23452-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03blockdev: Allow overriding if_max_dev propertyJohn Snow
The if_max_devs table as in the past been an immutable default that controls the mapping of index => (bus,unit) for all boards and all HBAs for each interface type. Since adding this mapping information to the HBA device itself is currently unwieldly from the perspective of retrieving this information at option parsing time (e.g, within drive_new), we consider the alternative of marking the if_max_devs table mutable so that later configuration and initialization can adjust the mapping at will, but only up until a drive is added, at which point the mapping is finalized. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1412187569-23452-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03blockdev: Orphaned drive searchJohn Snow
When users use command line options like -hda, -cdrom, or even -drive if=ide, it is up to the board initialization routines to pick up these drives and create backing devices for them. Some boards, like Q35, have not been doing this. However, there is no warning explaining why certain drive specifications are just silently ignored, so this function adds a check to print some warnings to assist users in debugging these sorts of issues in the future. This patch will not warn about drives added with if_none, for which it is not possible to tell in advance if the omission of a backing device is an issue. A warning in these cases is considered appropriate. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1412187569-23452-2-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03qemu-iotests: Fix supported cache modes for 052Kevin Wolf
The requirement for this test case is really "no O_DIRECT", because the temporary snapshot for BDRV_O_SNAPSHOT is created in /tmp, which often is a tmpfs. Commit f210a83c ('qemu-iotests: Add _default_cache_mode and _supported_cache_modes') turned the restriction into writethrough-only, but that's not really necessary. Allow to run the test for any non-O_DIRECT cache modes, and use the global default of writeback if no cache mode is specified. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1412076430-11623-3-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03make check-block: Use default cache modesKevin Wolf
When qemu-iotests only gave a choice between cache=none and cache=writethrough, we picked cache=none because it was the option that would complete the test in finite time. Some tests could only work for one of the two options and would be skipped with cache=none, but that was an acceptable trade-off at the time. Today, however, qemu-iotests is a bit more flexible than that and you can specify any of the cache modes supported by qemu. The default is writeback, like in qemu, which is fast and (unlike cache=none) compatible with any host filesystem. Test cases that have specific requirements for the cache mode can also specify a different default. In order to get a fast test run that works everywhere and doesn't skip tests that need a different cache mode, not specifying any cache mode and instead relying on the default is the best we can do today. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1412076430-11623-2-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03Modify qemu_opt_rename to realize renaming all items in optsJun Li
Add realization of rename all items in opts for qemu_opt_rename. e.g: When add bps twice in command line, need to rename all bps to throttling.bps-total. This patch solved following bug: Bug 1145586 - qemu-kvm will give strange hint when add bps twice for a drive ref:https://bugzilla.redhat.com/show_bug.cgi?id=1145586 [Resolved conflict with commit 5abbf0ee4d87c695deb1c3fca9bb994b93a3e3be ("block: Catch simultaneous usage of options and their aliases"). Check for simultaneous use first, and then loop over all options. --Stefan] Signed-off-by: Jun Li <junmuzi@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1411537527-16715-1-git-send-email-junmuzi@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03vmdk: Fix integer overflow in offset calculationFam Zheng
This fixes the bug introduced by commit c6ac36e (vmdk: Optimize cluster allocation). $ ~/build/master/qemu-io /stor/vm/arch.vmdk -c 'write 2G 1k' write failed: Invalid argument Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1411437381-11234-1-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03block: Drop superfluous conditionals around qemu_opts_del()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1411999675-14533-1-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03ssh: Don't crash if either host or path is not specified.Richard W.M. Jones
$ ./qemu-img create -f qcow2 overlay \ -b 'json: { "file.driver":"ssh", "file.host":"localhost", "file.host_key_check":"no" }' qemu-img: qobject/qdict.c:193: qdict_get_obj: Assertion `obj != ((void *)0)' failed. Aborted A similar crash also happens if the file.host field is omitted. https://bugzilla.redhat.com/show_bug.cgi?id=1147343 Bug found and reported by Jun Li. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03snapshot: fix referencing wrong variable in while loop in do_delvmZhang Haoyu
The while loop variabal is "bs1", but "bs" is always passed to bdrv_snapshot_delete_by_id_or_name. Broken in commit a89d89d, v1.7.0. Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-02Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-20141002-1' ↵Peter Maydell
into staging input monitor patches: fix send-key release ordering and new input-send-event command # gpg: Signature made Thu 02 Oct 2014 09:10:44 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-input-20141002-1: add input-send-event command input: fix send-key monitor command release event ordering Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-02Merge remote-tracking branch 'remotes/kraxel/tags/pull-console-20141002-1' ↵Peter Maydell
into staging pixman: fix qemu_default_pixman_format (32bpp non-native endian) # gpg: Signature made Thu 02 Oct 2014 08:47:20 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-console-20141002-1: pixman: fix qemu_default_pixman_format (32bpp non-native endian) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-02Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20141002-1' into ↵Peter Maydell
staging vga: cleanups, prepare for endianness switching # gpg: Signature made Thu 02 Oct 2014 08:10:49 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vga-20141002-1: vga: Add endian to vmstate vga: Make fb endian a common state variable vga: Rename vga_template.h to vga-helpers.h vga: Remove some "should be done in BIOS" comments cirrus: Remove non-32bpp cursor drawing vga: Simplify vga_draw_blank() a bit vga: Remove rgb_to_pixel indirection vga: Separate LE and BE conversion functions vga: Remove remainder of old conversion cruft vga: Start cutting out non-32bpp conversion support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-02add input-send-event commandMarcelo Tosatti
Which allows specification of absolute/relative, up/down and console parameters. Suggested by Gerd Hoffman. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-02input: fix send-key monitor command release event orderingGerd Hoffmann
commit 2e377f1730d06deafb3e3ef6cf88792de4a6f4df changed the ordering of the release events as side effect. Some guests are not happy with that and don't recognise ctrl-alt-del any more. This patch restores the old last-pressed first-released behavior. Cc: Amos Kong <akong@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-30Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
This update brings dataplane to virtio-scsi (NOT yet 100% thread-safe, though, which makes it really, really experimental. It also brings asynchronous cancellation to the SCSI subsystem and implements it in virtio-scsi. This is a pretty important feature. Almost all the work here was done by Fam Zheng. I also included the virtio refcount fixes from Gonglei, because they had a small conflict with virtio-scsi dataplane. This pull request is using the new subkey 4E6B09D7. # gpg: Signature made Tue 30 Sep 2014 12:31:02 BST using RSA key ID 4E6B09D7 # gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>" # gpg: aka "Paolo Bonzini <bonzini@gnu.org>" * remotes/bonzini/tags/for-upstream: (39 commits) block/iscsi: handle failure on malloc of the allocationmap util: introduce bitmap_try_new virtio-scsi: Handle TMF request cancellation asynchronously scsi: Introduce scsi_req_cancel_async scsi: Introduce scsi_req_cancel_complete scsi: Drop SCSIReqOps.cancel_io scsi: Unify request unref in scsi_req_cancel scsi-generic: Handle canceled request in scsi_command_complete scsi: Drop scsi_req_abort virtio-scsi: Process ".iothread" property virtio-scsi: Call bdrv_io_plug/bdrv_io_unplug in cmd request handling virtio-scsi: Batched prepare for cmd reqs virtio-scsi: Two stages processing of cmd request virtio-scsi: Add migration state notifier for dataplane code virtio-scsi: Hook up with dataplane virtio-scsi-dataplane: Code to run virtio-scsi on iothread virtio-scsi: Add VirtIOSCSIVring in VirtIOSCSIReq virtio-scsi: Add 'iothread' property to virtio-scsi virtio: add a wrapper for virtio-backend initialization virtio-9p: fix virtio-9p child refcount in transports ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-30Merge remote-tracking branch 'remotes/kraxel/tags/pull-audio-20140930-1' ↵Peter Maydell
into staging ac97: register reset via qom # gpg: Signature made Tue 30 Sep 2014 12:32:29 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-audio-20140930-1: ac97: register reset via qom Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-30Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pci, pc, virtio, misc bugfixes A bunch of bugfixes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 29 Sep 2014 17:59:57 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: vl: Adjust the place of calling mlockall to speedup VM's startup pc-dimm: Don't check dimm->node when there is non-NUMA config pci-hotplug-old: avoid losing error message Revert "virtio-pci: fix migration for pci bus master" loader: g_realloc(p, 0) frees and returns NULL, simplify Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-30vga: Add endian to vmstateBenjamin Herrenschmidt
Include the endian state in the migration stream as an optional subsection which we only include when the endian isn't the default, thus enabling backward compatibility of the common case. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Changes by kraxel: * Remove bochs dispi interface changes. We'll do that in a different way to make sure we don't conflict with possible future bochs dispi interface changes. * keep live migration bits. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2014-09-30vga: Make fb endian a common state variableBenjamin Herrenschmidt
And initialize it based on target endian Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2014-09-30vga: Rename vga_template.h to vga-helpers.hBenjamin Herrenschmidt
It's no longer a template, we only instanciate the file once. Keep it a #included file so the functions remain static. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2014-09-30vga: Remove some "should be done in BIOS" commentsBenjamin Herrenschmidt
Not all platforms have a VGA BIOS, powerpc typically relies on using the DISPI interface to initialize the card. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2014-09-30cirrus: Remove non-32bpp cursor drawingBenjamin Herrenschmidt
We only draw cursor on non-shared surfaces (so it seems...) and these are always 32bpp Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2014-09-30vga: Simplify vga_draw_blank() a bitBenjamin Herrenschmidt
The test for surface_bits_per_pixel() isn't necessary anymore, the 8bpp case never happens. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2014-09-30vga: Remove rgb_to_pixel indirectionBenjamin Herrenschmidt
We always use rgb_to_pixel32 nowadays. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2014-09-30vga: Separate LE and BE conversion functionsBenjamin Herrenschmidt
Provide different functions for converting from an LE vs a BE framebuffer. We cannot rely on the simple cases always being shared surfaces since cirrus will need to always shadow for cursor emulation, so we need the full set of functions to be able to later handle runtime switching. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>\ Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2014-09-30vga: Remove remainder of old conversion cruftBenjamin Herrenschmidt
All the macros used to generate different versions of vga_template.h are now unnecessary, take them all out and remove the _32 suffix from most functions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2014-09-30vga: Start cutting out non-32bpp conversion supportBenjamin Herrenschmidt
Nowadays, we either share a surface with the host, or we create a 32bpp ARGB console surface. So we only need to draw/convert to 32bpp, enabling us to remove all but one instance of vga_template.h inclusion (to be further cleaned up), rgb_to_pixel_* etc... Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2014-09-30pixman: fix qemu_default_pixman_format (32bpp non-native endian)Gerd Hoffmann
Bug breaks SDL display of bigendian guests on little endian hosts. Reported-by: BALATON Zoltan <balaton@eik.bme.hu> Reported-by: Valentin Manea <valentin.manea@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-30block/iscsi: handle failure on malloc of the allocationmapPeter Lieven
Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30util: introduce bitmap_try_newPeter Lieven
regular bitmap_new simply aborts if the memory allocation fails. bitmap_try_new returns NULL on failure and allows for proper error handling. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-scsi: Handle TMF request cancellation asynchronouslyFam Zheng
For VIRTIO_SCSI_T_TMF_ABORT_TASK and VIRTIO_SCSI_T_TMF_ABORT_TASK_SET, use scsi_req_cancel_async to start the cancellation. Because each tmf command may cancel multiple requests, we need to use a counter to track the number of remaining requests we still need to wait for. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30scsi: Introduce scsi_req_cancel_asyncFam Zheng
Devices will call this function to start an asynchronous cancellation. The bus->info->cancel will be called after the request is canceled. Devices will probably need to track a separate TMF request that triggers this cancellation, and wait until the cancellation is done before completing it. So we store a notifier list in SCSIRequest and in scsi_req_cancel_complete we notify them. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30scsi: Introduce scsi_req_cancel_completeFam Zheng
Let the aio cb do the clean up and notification job after scsi_req_cancel, in preparation for asynchronous cancellation. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30scsi: Drop SCSIReqOps.cancel_ioFam Zheng
The only two implementations are identical to each other, with nothing specific to device: they only call bdrv_aio_cancel with the SCSIRequest.aiocb. Let's move it to scsi-bus. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30scsi: Unify request unref in scsi_req_cancelFam Zheng
Before, scsi_req_cancel will take ownership of the canceled request and unref it. We did this because we didn't know whether AIO CB will be called or not during the cancelling, so we set the io_canceled flag before calling it, and skip unref in the potentially called callbacks, which is not very nice. Now, bdrv_aio_cancel has a stricter contract that the completion callbacks are always called, so we can remove the checks of req->io_canceled and just unref it in callbacks. It will also make implementing asynchronous cancellation easier. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30scsi-generic: Handle canceled request in scsi_command_completeFam Zheng
Now that we always called the cb in bdrv_aio_cancel, let's make scsi-generic callbacks check io_canceled flag similarly to scsi-disk. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30scsi: Drop scsi_req_abortFam Zheng
The only user of this function is spapr_vscsi.c. We can convert to scsi_req_cancel plus adding a check in vscsi_request_cancelled. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> [Drop prototype. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30Merge remote-tracking branch 'remotes/rth/tags/tcg-next-201400729' into stagingPeter Maydell
tcg updates # gpg: Signature made Mon 29 Sep 2014 19:58:04 BST using RSA key ID 4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" * remotes/rth/tags/tcg-next-201400729: tcg: Always enable TCGv type checking qemu/compiler: Define QEMU_ARTIFICIAL tcg-aarch64: Use 32-bit loads for qemu_ld_i32 tcg-sparc: Use UMULXHI instruction tcg-sparc: Rename ADDX/SUBX insns tcg-sparc: Use ADDXC in setcond_i64 tcg-sparc: Fix setcond_i32 uninitialized value tcg-sparc: Use ADDXC in addsub2_i64 tcg-sparc: Support addsub2_i64 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-30Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20140929' into staging target-arm: * more EL2/EL3 preparation work * don't handle c15_cpar changes via tb_flush() * fix some unused function warnings in ARM devices * build the GDB XML for 32 bit CPUs into qemu-*-aarch64 * implement guest breakpoint support # gpg: Signature made Mon 29 Sep 2014 19:25:37 BST using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20140929: target-arm: Add support for VIRQ and VFIQ target-arm: Add IRQ and FIQ routing to EL2 and 3 target-arm: A64: Emulate the SMC insn target-arm: Add a Hypervisor Trap exception type target-arm: A64: Emulate the HVC insn target-arm: A64: Correct updates to FAR and ESR on exceptions target-arm: Don't take interrupts targeting lower ELs target-arm: Break out exception masking to a separate func target-arm: A64: Refactor aarch64_cpu_do_interrupt target-arm: Add SCR_EL3 target-arm: Add HCR_EL2 target-arm: Don't handle c15_cpar changes via tb_flush() hw/input/tsc210x.c: Delete unused array tsc2101_rates hw/display/pxa2xx_lcd.c: Remove unused function pxa2xx_dma_rdst_set hw/intc/imx_avic.c: Remove unused function imx_avic_set_prio() hw/display/blizzard.c: Delete unused function blizzard_rgb2yuv configure: Build GDB XML for 32 bit ARM CPUs into qemu aarch64 binaries target-arm: Implement handling of breakpoint firing target-arm: Implement setting guest breakpoints Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-30virtio-scsi: Process ".iothread" propertyFam Zheng
We are ready, now let's effectively enable dataplane. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-scsi: Call bdrv_io_plug/bdrv_io_unplug in cmd request handlingFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-scsi: Batched prepare for cmd reqsFam Zheng
Queue the popped requests while calling virtio_scsi_handle_cmd_req_prepare(), then submit them after all prepared. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-scsi: Two stages processing of cmd requestFam Zheng
Mechanical change, in preparation for bdrv_io_plug/bdrv_io_unplug. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-scsi: Add migration state notifier for dataplane codeFam Zheng
Similar to virtio-blk-dataplane, we stop the iothread while migration starts and restart it when migration finishes. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-scsi: Hook up with dataplaneFam Zheng
This enables the virtio-scsi-dataplane code by setting the iothread in virtio-scsi device, and makes any function that is called by back from dataplane to cooperate with the caller: they need to be vring/iothread aware when handling the requests and using scsi devices on the bus. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-scsi-dataplane: Code to run virtio-scsi on iothreadFam Zheng
This implements the core part of dataplane feature of virtio-scsi. A few fields are added in VirtIOSCSICommon to maintain the dataplane status. These fields are managed by a new source file: virtio-scsi-dataplane.c. Most code in this file will run on an iothread, unless otherwise commented as in a global mutex context, such as those functions to start, stop and setting the iothread property. Upon start, we set up guest/host event notifiers, in a same way as virtio-blk does. The handlers then pop request from vring and call into virtio-scsi.c functions to process it. So we need to make sure make all those called functions work with iothread, too. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-scsi: Add VirtIOSCSIVring in VirtIOSCSIReqFam Zheng
Move VirtIOSCSIReq to header and add one field "vring" as a wrapper structure of Vring, VirtIOSCSIVring. This is necessary for coming dataplane code that runs uses vring on iothread. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-30virtio-scsi: Add 'iothread' property to virtio-scsiFam Zheng
Similar to this property in virtio-blk for dataplane, add it as a QOM link in virtio-scsi and an alias in virtio-scsi-pci and virtio-scsi-ccw, in order to assign an iothread to the device. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-22 14:09:58 +0000