aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-14SPARC64: Add UA2007 ASI_BLK_AIU[PS]L? ASIs for ldfaTsuneo Saito
Support UA2007 block load ASIs for ldfa instructions. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: fp_disabled checks on stfa/stdfa/stqfaTsuneo Saito
stfa/stdfa/stqfa instructions should raise fp_disabled exceptions if %pstate.PEF==0 or %fprs.FEF==0. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: Implement stfa/stdfa/stqfa instrcutions properlyTsuneo Saito
This patch implements sparcv9 stfa/stdfa/stqfa instructions with non block-store ASIs. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: fp_disabled checks on ldfa/lddfa/ldqfaTsuneo Saito
ldfa/lddfa/ldqfa instructions should raise fp_disabled exceptions if %pstate.PEF==0 or %fprs.FEF==0. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-14SPARC64: Implement ldfa/lddfa/ldqfa instructions properlyTsuneo Saito
This patch implements sparcv9 ldfa/lddfa/ldqfa instructions with non block-load ASIs. Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-13linux-user/signal.c: Rename s390 target_ucontext fields to fix ia64Peter Maydell
The ia64 sys/ucontext.h defines macros 'uc_link', 'uc_sigmask' and 'uc_stack'. Rename the s390 target_ucontext struct members to tuc_*, bringing them into line with the other targets and fixing a compile failure on ia64 hosts caused by this clash. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-13linux-user: make MIPS and ARM eabi use same argument reorderingRiku Voipio
MIPS uses similar calling convention than ARM eabi, where when using 64-bit values some registers are skipped. This patch makes MIPS and ARM eabi share the argument reordering code. This affects ftruncate64, creating insane sized fails (or just failing). Cc: Wesley W. Terpstra <terpstra@debian.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-13linux-user: correct syscall 123 on sh4Riku Voipio
As reported by Cédric VINCENT: The syscall #123 on SH4 should be "TARGET_NR_cacheflush" instead of "TARGET_NR_modify_ldt" [1]. The only consequence of this misnaming is that many "Unsupported syscall" warnings are issued when emulating JIT compilers. Reported-by: Cédric VINCENT <cedric.vincent@st.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-12os-posix: set groups properly for -runasStefan Hajnoczi
Andrew Griffiths reports that -runas does not set supplementary group IDs. This means that gid 0 (root) is not dropped when switching to an unprivileged user. Add an initgroups(3) call to use the -runas user's /etc/groups membership to update the supplementary group IDs. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12esp: cancel current request only if some request is in flightHervé Poussineau
This bug was introduced in 94d3f98a3f3caddd7875f9a11776daeb84962a7b: scsi_cancel_io was checking if some request was pending before trying to cancel it, while scsi_req_cancel always cancels the request. This may lead to a crash of Qemu due to dereferencing a NULL pointer, as exhibited by NetBSD 5.1 installer on MIPS Magnum emulation. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12target-alpha, target-ppc: Remove unnecessary setjmp.h includePeter Maydell
Remove the include of setjmp.h from the cpu.h of target-alpha and target-ppc. This is unnecessary because cpu-defs.h already includes this header; this change brings these two targets into line with all the rest. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12Remove unneeded setjmp.h (fix compilation on Debian "lenny")Stefan Weil
Some versions of png.h cannot be included after setjmp.h, even when PNG_SKIP_SETJMP_CHECK was defined. setjmp.h was included from qemu-common.h and is not needed there. Removing the include statement fixes compilation of ui/vnc-enc-tight.c with CONFIG_VNC_PNG defined. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12tcg: Reload local variables after return from longjmpJan Kiszka
Recent compilers look deep into cpu_exec, find longjmp as a noreturn function and decide to smash some stack variables as they won't be used again. This may lead to env becoming invalid after return from setjmp, causing crashes. Fix it by reloading env from cpu_single_env in that case. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12exec-all.h: Make MAX_OP_PER_INSTR large enough for target-arm's usesPeter Maydell
The target-arm frontend's worst-case TCG ops per instr is 194 (and in general many of the "load multiple registers" ARM instructions generate more than 100 TCG ops). Raise MAX_OP_PER_INSTR accordingly to avoid possible buffer overruns. Since it doesn't make any sense for the "64 bit guest on 32 bit host" case to have a smaller limit than the normal case, we collapse the two cases back into each other again. (This increase costs us about 14K in extra static buffer space and 21K of extra margin at the end of a 32MB codegen buffer.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12exec.c: Fix calculation of code_gen_buffer_max_sizePeter Maydell
When calculating the point at which we should not try to put another TB into the code gen buffer, we have to allow not just for OPC_MAX_SIZE but OPC_BUF_SIZE. This is because the target translate.c will only stop when an instruction has put it past the OPC_MAX_SIZE limit, so we have to include the MAX_OP_PER_INSTR margin which that final insn might have used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12spapr: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12s390-virtio: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12ppc405_uc: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12pl080: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12msix: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12msi: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12intel-hda: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12hpet: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12exec: add endian specific phys ld/st functionsAlexander Graf
Device code some times needs to access physical memory and does that through the ld./st._phys functions. However, these are the exact same functions that the CPU uses to access memory, which means they will be endianness swapped depending on the target CPU. However, devices don't know about the CPU's endianness, but instead access memory directly using their own interface to the memory bus, so they need some way to read data with their native endianness. This patch adds _le and _be functions to ld./st._phys. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12mips: rlimit codes are not the sameWesley W. Terpstra
The codes for get/setrlimit differ between linux target platforms. This patch adds conversion. This is important else programs (rsyslog, python, ...) can go into a near infinite loop trying to close all the file descriptors from 0 to -1. Signed-off-by: Wesley W. Terpstra <terpstra@debian.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-12mips: rlimit incorrectly converts valuesWesley W. Terpstra
Byte swap was applied in the wrong order with testing for RLIM_INFINITY. On mips bigendian from an amd64 system this results in infinity being misinterpretted as 2^31-1. This is a serious bug because it causes setrlimit stack size to kill all child processes. This means (for example) that 'make' can run no children. The mechanism of failure: 1. parent sets stack size rlimit to 'infinity' 2. qemu screws this value up 3. child process fetches stack size as a large (but non-infinite) value 4. qemu tries to allocate stack before execution 5. stack allocation fails (too big) and child process dies Signed-off-by: Wesley W. Terpstra <terpstra@debian.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-12mips: null pointer deref should segfaultWesley W. Terpstra
Dereferencing a null pointer causes an exception 0xC (EXCP_AdEL) instead of EXCP_TLBL. This should also trigger a segfault. Signed-off-by: Wesley W. Terpstra <terpstra@debian.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-12mips: missing syscall returns wrong errnoWesley W. Terpstra
Return -TARGET_ENOSYS instead of -ENOSYS from linux-user/main.c * Caused strange 'Level 2 synchronization messages' instead of correctly reporting the syscall was missing. * Made glibc simply fail instead of using older syscalls Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
2011-07-12mips: sigaltstack argsWesley W. Terpstra
The syscall sigaltstack takes two parameters, not zero. This patch should have no impact as only values above 4 influence the runtime behaviour. Nevertheless, it is wrong. Signed-off-by: Wesley W. Terpstra <terpstra@debian.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-11linux-user/syscall.c: Enforce pselect6 sigset size restrictionsPeter Maydell
Enforce the same restriction on the size of the sigset passed to pselect6 as the Linux kernel does. This is both correct and silences a gcc 4.6 warning about a write-only variable. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-11linux-user: Implement prlimit64 syscallPeter Maydell
Implement the prlimit64 syscall. Slightly modified to apply upstream -Riku Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-11linux-user: Add syscall numbers from kernel 2.6.39.2Peter Maydell
Add syscall numbers for new syscall numbers; this brings us into line with Linux 2.6.39.2. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-11linux-user: Add support for even more FB ioctlsCédric VINCENT
This patch was validated with programs from DirectFB-1.0 and WebKit/DirectFB. Signed-off-by: Cédric VINCENT <cedric.vincent@st.com> Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-11linux-user: Add support for more VT ioctlsCédric VINCENT
DirectFB-1.0 uses at least two of the four added ioctls, and the two others were added for completeness. This patch was validated with the program "vlock -all/-new". Signed-off-by: Cédric VINCENT <cedric.vincent@st.com> Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-11linux-user: Add support for KD...LED ioctlsCédric VINCENT
DirectFB-1.0 uses at least one of the four added ioctls, and the three others were added for completeness. This patch was validated with the program "setleds" and the following Makefile: SETLEDS_INIT = setleds -v -num -caps -scroll SETLEDS_TESTS = sh -c ' \ setleds -v +num +caps +scroll; \ setleds -v -num -caps -scroll; \ setleds -v +num -caps -scroll; \ setleds -v +num +caps -scroll; \ setleds -v +num +caps +scroll; \ setleds -v -num +caps +scroll; \ setleds -v -num -caps +scroll; \ setleds -v -num -caps -scroll' SETLEDS_HOST = setleds SETLEDS_QEMU = "SETLEDS_QEMU not set" .PHONY: setleds_tests setleds_tests: rm -f setleds.host setleds.target $(SETLEDS_INIT:setleds=$(SETLEDS_HOST)) $(SETLEDS_TESTS:setleds=$(SETLEDS_HOST)) >> setleds.host $(SETLEDS_INIT:setleds=$(SETLEDS_QEMU)) $(SETLEDS_TESTS:setleds=$(SETLEDS_QEMU)) >> setleds.target cmp setleds.host setleds.target Signed-off-by: Cédric VINCENT <cedric.vincent@st.com> Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-11arm-semi: Provide access to CLI arguments passed through the "-append" optionCédric VINCENT
This patch basically adapts the new semi-hosting command-line support -- introduced by Wolfgang Schildbach in the commit 2e8785ac -- for use in system-mode. Note that the "arm_cmdline_len" and "host_cmdline_len" variables were renamed respectively "input_size" and "output_size" because: * in C, the term "length" is generally used to count the number of character in a string, not to count the number of bytes in a buffer (as it is the case here). * in QEMU, the term "host" is used to name variables that are in the host address space, not to name variables in the target address space (as it is the case here). * in the case of this system-call, the terms "input" and "output" fit the semantic of the official ARM semi-hosting specification quite well. I know renaming can be considered harmful but I do think in this case the semantic really matters to keep this code more understandable. Signed-off-by: Cédric VINCENT <cedric.vincent@st.com> Reviewed-by: Christophe Lyon <christophe.lyon@st.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Paul Brook <paul@codesourcery.com> Cc: Wolfgang Schildbach <wschi@dolby.com> Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-08usb-ohci: raise interrupt on attachGerd Hoffmann
Got lost in commit 618c169b577db64ac6589ad48825d2e11760d1a6, add it back in. Also fix codestyle while we are at it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-08usb-hub: remove unused descriptor arraysGerd Hoffmann
Somehow they where left over when converting the hub to the new usb descriptor infrastructure ... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-08usb: fixup bluetooth descriptorsGerd Hoffmann
Commit 4696425cd05c7baa0a4b469d43ba4b8488bcfc0f changes some endpoints from isocrounous to interrupt by mistake. Fix it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-08usb_register_port(): do not set port->opaque and port->index twiceJes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-08usb: update documentationGerd Hoffmann
Add a paragraph on companion controller mode and a configuration file which sets it all up for you. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05ehci: add ich9 controller.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05ehci: fix port count.Gerd Hoffmann
The ICH4 EHCI controller which we emulate has six ports not four. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05uhci: add ich9 controllersGerd Hoffmann
Add ich9 controllers, Factor out properties to a separate struct and reference it to reduce duplication. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05pci: add ich9 usb controller idsGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05usb-ohci: Add support for being a companion controllerHans de Goede
To use as a companion controller, use pci-ohci as device and set the masterbus and num-ports properties, ie: -device usb-ehci,addr=0b.1,multifunction=on,id=ehci0 -device pci-ohci,addr=0b.0,multifunction=on,masterbus=ehci0.0,num-ports=4 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05usb-uhci: Add support for being a companion controllerHans de Goede
To use as a companion controller set the masterbus property. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05usb-ehci: Add support for registering companion controllersHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05usb-ehci: Fix handling of PED and PEDC port status bitsHans de Goede
The PED bit should only be set for highspeed devices and the PEDC bit should not be set on "normal" PED bit changes, only on io errors. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05usb: assert on calling usb_attach(port, NULL) on a port without a devHans de Goede
with the "usb-ehci: cleanup port reset handling" patch in place no callers are calling usb_attach(port, NULL) for a port where port->dev is NULL. Doing that makes no sense as that causes the port detach op to get called for a port with nothing attached. Add an assert that port->dev != NULL when dev == NULL, and remove the check for not having a port->dev in the dev == NULL case. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 10:37:15 +0000