| Age | Commit message (Collapse) | Author |
|---|
|
Microchip PolarFire SoC integrates one Cadence SDHCI controller.
On the Icicle Kit board, one eMMC chip and an external SD card
connect to this controller depending on different configuration.
As QEMU does not support eMMC yet, we just emulate the SD card
configuration. To test this, the Hart Software Services (HSS)
should choose the SD card configuration:
$ cp boards/icicle-kit-es/def_config.sdcard .config
$ make BOARD=icicle-kit-es
The SD card image can be built from the Yocto BSP at:
https://github.com/polarfire-soc/meta-polarfire-soc-yocto-bsp
Note the generated SD card image should be resized before use:
$ qemu-img resize /path/to/sdcard.img 4G
Launch QEMU with the following command:
$ qemu-system-riscv64 -nographic -M microchip-icicle-kit -sd sdcard.img
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1598924352-89526-9-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Cadence SD/SDIO/eMMC Host Controller (SD4HC) is an SDHCI compatible
controller. The SDHCI compatible registers start from offset 0x200,
which are called Slot Register Set (SRS) in its datasheet.
This creates a Cadence SDHCI model built on top of the existing
generic SDHCI model. Cadence specific Host Register Set (HRS) is
implemented to make guest software happy.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1598924352-89526-8-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Microchip PolarFire SoC has 5 MMUARTs, and the Icicle Kit board
wires 4 of them out. Let's connect all 5 MMUARTs.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1598924352-89526-7-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Microchip PolarFire SoC MMUART is ns16550 compatible, with some
additional registers. Create a simple MMUART model built on top
of the existing ns16550 model.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1598924352-89526-6-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
This is an initial support for Microchip PolarFire SoC Icicle Kit.
The Icicle Kit board integrates a PolarFire SoC, with one SiFive's
E51 plus four U54 cores and many on-chip peripherals and an FPGA.
For more details about Microchip PolarFire Soc, please see:
https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga
Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000.
The following perepherals are created as an unimplemented device:
- Bus Error Uint 0/1/2/3/4
- L2 cache controller
- SYSREG
- MPUCFG
- IOSCBCFG
More devices will be added later.
The BIOS image used by this machine is hss.bin, aka Hart Software
Services, which can be built from:
https://github.com/polarfire-soc/hart-software-services
To launch this machine:
$ qemu-system-riscv64 -nographic -M microchip-icicle-kit
The memory is set to 1 GiB by default to match the hardware.
A sanity check on ram size is performed in the machine init routine
to prompt user to increase the RAM size to > 1 GiB when less than
1 GiB ram is detected.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Now that we have the newly introduced 'resetvec' property in the
RISC-V CPU and HART, instead of hard-coding the reset vector addr
in the CPU's instance_init(), move that to riscv_cpu_realize()
based on the configured property value from the RISC-V machines.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1598924352-89526-4-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
RISC-V machines do not instantiate RISC-V CPUs directly, instead
they do that via the hart array. Add a new property for the reset
vector address to allow the value to be passed to the CPU, before
CPU is realized.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1598924352-89526-3-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Currently the reset vector address is hard-coded in a RISC-V CPU's
instance_init() routine. In a real world we can have 2 exact same
CPUs except for the reset vector address, which is pretty common in
the RISC-V core IP licensing business.
Normally reset vector address is a configurable parameter. Let's
create a 64-bit property to store the reset vector address which
covers both 32-bit and 64-bit CPUs.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1598924352-89526-2-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
When shutting down the machine running a mainline Linux kernel, the
following error happens:
$ build/riscv64-softmmu/qemu-system-riscv64 -bios default -M virt \
-display none -initrd rootfs.cpio -kernel Image -m 512m \
-nodefaults -serial mon:stdio
...
Requesting system poweroff
[ 4.999630] reboot: Power down
sbi_trap_error: hart0: trap handler failed (error -2)
sbi_trap_error: hart0: mcause=0x0000000000000007 mtval=0x0000000000100000
sbi_trap_error: hart0: mepc=0x000000008000d4cc mstatus=0x0000000000001822
sbi_trap_error: hart0: ra=0x000000008000999e sp=0x0000000080015c78
sbi_trap_error: hart0: gp=0xffffffe000e76610 tp=0xffffffe0081b89c0
sbi_trap_error: hart0: s0=0x0000000080015c88 s1=0x0000000000000040
sbi_trap_error: hart0: a0=0x0000000000000000 a1=0x0000000080004024
sbi_trap_error: hart0: a2=0x0000000080004024 a3=0x0000000080004024
sbi_trap_error: hart0: a4=0x0000000000100000 a5=0x0000000000005555
sbi_trap_error: hart0: a6=0x0000000000004024 a7=0x0000000080011158
sbi_trap_error: hart0: s2=0x0000000000000000 s3=0x0000000080016000
sbi_trap_error: hart0: s4=0x0000000000000000 s5=0x0000000000000000
sbi_trap_error: hart0: s6=0x0000000000000001 s7=0x0000000000000000
sbi_trap_error: hart0: s8=0x0000000000000000 s9=0x0000000000000000
sbi_trap_error: hart0: s10=0x0000000000000000 s11=0x0000000000000008
sbi_trap_error: hart0: t0=0x0000000000000000 t1=0x0000000000000000
sbi_trap_error: hart0: t2=0x0000000000000000 t3=0x0000000000000000
sbi_trap_error: hart0: t4=0x0000000000000000 t5=0x0000000000000000
sbi_trap_error: hart0: t6=0x0000000000000000
The kernel does a 16-bit write when powering off the machine, which
was allowed before commit 5d971f9e67 ("memory: Revert "memory: accept
mismatching sizes in memory_region_access_valid""). Make min_access_size
match reality so that the machine can shut down properly now.
Cc: qemu-stable@nongnu.org
Fixes: 88a07990fa ("SiFive RISC-V Test Finisher")
Fixes: 5d971f9e67 ("memory: Revert "memory: accept mismatching sizes in memory_region_access_valid"")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200901055822.2721209-1-natechancellor@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
When the cause number is equal to or greater than 23, print "(unknown)" in
trace_riscv_trap. The max valid number of riscv_excp_names is 23, so the last
excpetion "guest_store_page_fault" can not be printed.
In addition, the current check of cause is invalid for riscv_intr_names. So
introduce riscv_cpu_get_trap_name to get the trap cause name.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200814035819.1214-1-jiangyifei@huawei.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
'remotes/kraxel/tags/sirius/ipxe-20200908-pull-request' into staging
ipxe: update to aug 2020 snapshot.
# gpg: Signature made Tue 08 Sep 2020 07:09:26 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/sirius/ipxe-20200908-pull-request:
ipxe: update binaries
ipxe: drop ia32 efi roms
ipxe: update submodule
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
QAPI patches patches for 2020-09-08
# gpg: Signature made Tue 08 Sep 2020 07:06:52 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-09-08:
qapi/block-core.json: Fix nbd-server-start docs
qapi: Fix indentation, again
qapi/migration.json: Fix indentation
qapi: Make section headings start a new doc comment block
qapi: Reject section markup in definition documentation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
ppc patch queue 2020-09-08
This supersedes ppc-for-5.2-20200904, it fixes a couple of bugs in
that PR and adds a few extra patches.
Next pull request for qemu-5.2. The biggest thing here is the
generalization of ARM's start-powered-off machine property to all
targets. This can fix a number of odd little edge cases where KVM
could run vcpus before they were properly initialized. This does
include changes to a number of files that aren't normally in my
purview. There are suitable Acked-by lines and Peter requested this
come in via my tree, since the most pressing requirement for it is in
pseries machines with the POWER secure virtual machine facility.
In addition we have:
* Daniel Barboza's rework and clean up of pseries machine NUMA handling
* Correction to behaviour of the nvdimm= generic machine property on
pseries
* An optimization to the allocation of XIVE interrupts on KVM
* Some fixes for confused behaviour with kernel_irqchip when both
XICS and XIVE are in play
* Add HIOMAP comamnd to pnv flash
* Properly advertise the fact that spapr_vscsi doesn't handle
hotplugged disks
* Some assorted minor enhancements
# gpg: Signature made Tue 08 Sep 2020 06:19:34 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.2-20200908: (33 commits)
spapr_numa: use spapr_numa_get_vcpu_assoc() in home_node hcall
spapr_numa: create a vcpu associativity helper
spapr: move h_home_node_associativity to spapr_numa.c
spapr_numa: move NVLink2 associativity handling to spapr_numa.c
spapr, spapr_numa: move lookup-arrays handling to spapr_numa.c
spapr, spapr_numa: handle vcpu ibm,associativity
spapr: introduce SpaprMachineState::numa_assoc_array
ppc/spapr_nvdimm: turn spapr_dt_nvdimm() static
ppc: introducing spapr_numa.c NUMA code helper
hw/ppc/ppc4xx_pci: Replace pointless warning by assert()
hw/ppc/ppc4xx_pci: Use ARRAY_SIZE() instead of magic value
target/s390x: Use start-powered-off CPUState property
sparc/sun4m: Use start-powered-off CPUState property
sparc/sun4m: Don't set cs->halted = 0 in main_cpu_reset()
mips/cps: Use start-powered-off CPUState property
ppc/e500: Use start-powered-off CPUState property
ppc/spapr: Use start-powered-off CPUState property
target/arm: Move setting of CPU halted state to generic code
target/arm: Move start-powered-off property to generic CPUState
ppc/spapr_nvdimm: do not enable support with 'nvdimm=off'
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Use lookup_and_goto_tb.
Cleanup and fill in VMStateDescription.
# gpg: Signature made Mon 07 Sep 2020 21:01:55 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-mb-20200907-2:
configure: Do not set TARGET_ABI32 for microblaze
target/microblaze: Put MicroBlazeCPUConfig into DisasContext
target/microblaze: Fill in VMStateDescription for cpu
target/microblaze: Move mmu parameters to MicroBlazeCPUConfig
target/microblaze: Treat pvr_regs as constant
target/microblaze: Move pvr regs to MicroBlazeCPUConfig
target/microblaze: Reorg MicroBlazeCPUConfig to minimize holes
target/microblaze: Split out MicroBlazeCPUConfig
target/microblaze: Diagnose invalid insns in delay slots
target/microblaze: Use tcg_gen_lookup_and_goto_ptr
target/microblaze: Force rtid, rted, rtbd to exit
target/microblaze: Handle DISAS_EXIT_NEXT in delay slot
target/microblaze: Replace cpustate_changed with DISAS_EXIT_NEXT
target/microblaze: Introduce DISAS_EXIT_NEXT, DISAS_EXIT_JUMP
target/microblaze: Rename DISAS_UPDATE to DISAS_EXIT
target/microblaze: Rename mmu structs
target/microblaze: Cleanup mb_cpu_do_interrupt
target/microblaze: Renumber D_FLAG
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
meson related:
* convert unit tests
* bugfixes for mtest2make
* miscellaneous bugfixes
* dead code removal and configure cleanups
* oss-fuzz fixes
* msys fixes
# gpg: Signature made Tue 08 Sep 2020 10:43:27 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (45 commits)
docs: update build system documentation
meson: remove linkage of sdl to baum
meson: Convert undefsym.sh to undefsym.py
fuzz: Add support for custom fuzzing library
meson: specify fuzz linker script as a project arg
oss-fuzz: fix rpath
configure: update dtc submodule
docs: suggest Meson replacements for various configure functions
configure: drop dead variables and functions
configure: do not include dependency flags in QEMU_CFLAGS and LIBS
meson: get opengl compilation flags from OPENGL_CFLAGS
meson: get glib compilation flags from GLIB_CFLAGS
configure: do not look for install(1)
configure: remove unnecessary libm test
configure: move -ldl test to meson
meson: keep all compiler flags detection together
configure: move disassembler configuration to meson
Makefile: inline the relevant parts of rules.mak
Makefile: remove dead variables and includes
meson: compute config_all_devices directly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Most of the Makefile bits are obsolete and can be removed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Ever since commit 537fe2d63f744e7c96ff45b60d09486a81958e06 there
has been a 'linkage' to sdl for compiling baum.c. Originally it
had to do with including sdl cflags for any file including sdl
headers. There is no longer any such need for baum.c, but the
association has persisted in the make system, and with the switch
to meson it has now become a hard requirement, which now causes
chardev-baum.so to not be produced if sdl is not configured.
Remove this bogus linkage.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-Id: <20200903152933.97838-1-brogers@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Shell scripts are not easily invoked from the build process
on MSYS, so convert undefsym.sh to a python script.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20200902170054.810-3-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
On oss-fuzz, we must use the LIB_FUZZING_ENGINE and CFLAGS environment
variables, rather than -fsanitize=fuzzer. With this change, when
LIB_FUZZING_ENGINE is set, the --enable-fuzzing configure option will
use that environment variable during the linking stage, rather than
-fsanitize=fuzzer
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200902173652.307222-3-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
With this change, the fuzzer-linker script should be specified outside
any --start-group/--end-group pairs. We need this on oss-fuzz, where
partially applying the linker-script results in a linker failure
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200902173652.307222-2-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Prior to this change,
readelf -d build/out/qemu/qemu-fuzz-i386-target-virtio-net-slirp
...
0x000000000000000f (RPATH) Library rpath: ['$$ORIGIN/lib':$ORIGIN/migration:$ORIGIN/]
As of 1a4db552d8 ("ninjatool: quote dollars in variables"), we don't
need to manually double the dollars. Also, remove the single-quotes as
they are copied into the rpath.
After this change:
0x000000000000000f (RPATH) Library rpath: [$ORIGIN/lib:$ORIGIN/migration:$ORIGIN/]
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200902142657.112879-3-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Update the dtc submodule in configure already and symlink dtc after
git submodule update, because on win32 symlinks to non-existing folders
are forbidden.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20200902170054.810-2-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
All Meson executables should specify their dependencies explicitly, either
directly or indirectly via declare_dependency. Makefiles instead did
not propagate dependencies correctly from static libraries, for example.
Therefore, flags for dependencies need not be included in QEMU_CFLAGS.
LIBS is not used at all, so drop that one as well.
In a few cases the dependencies were not yet specified, so add them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The opengl compilation flags were added to QEMU_CFLAGS. We do not
want them to be added to all compilation commands, so export them
also via OPENGL_CFLAGS rather than via QEMU_CFLAGS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The glib compilation flags were added to QEMU_CFLAGS. While we still
want them to be added to all compilation commands (at least for now),
do that via GLIB_CFLAGS rather than via QEMU_CFLAGS. This shows that
glib is a special case and makes it clearer that QEMU_CFLAGS is only
about compiler commands and not dependencies.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It is not used anymore, so there is no Solaris-specific check to
perform.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The same test is already performed by meson.build.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Most of rules.mak is not used anymore, just inline what's needed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Makefile.objs, the .d files and various CONFIG_* symbols are not
used anymore by the Make side of the build; they are only processed
by Meson. We can delete them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is no need anymore to produce config-all-devices.mak, compute
the resulting dictionary directly instead of going through grepy.sh.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The $pwd_is_source_path variable is never "y", since
configure re-executes itself from a build directory.
Remove code that will never run.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-17-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
gettid() was introduced with glibc 2.30.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-15-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use meson benchmark() for them, adjust mtest2make.py for that.
A new target "make bench" can be used to run all benchmarks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-14-marcandre.lureau@redhat.com>
[Rewrite mtest2make part. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As this makes the TAP output invalid. Use g_test_message().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200828110734.1638685-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-11-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-10-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It was covered already in commit d3ca592b3c10 ("meson: convert check-block")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-9-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since there is not minimum version specified, and it's a test-only
dependency, it's fair to depend on a version that ships with a .pc I
suppose.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
UEFI on ia32 never really took off. Basically the BIOS -> UEFI shift
came too late, x64 was widespread already, so vendors went from BIOS
straight to UEFI on x64.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
master snapshot, most recent commit from Aug 23th
shortlog
========
Andrew Grasso (1):
[intel] Add INTEL_NO_PHY_RST for I218LM
Ben Bleything (1):
[intel] Set INTEL_NO_PHY_RST on i218v
Bobby Lockwood (1):
[libgcc] Change __divmoddi4 from int64 [unknown] to int64_t
Bruce Rogers (1):
[build] Be explicit about -fcommon compiler directive
Christian Nilsson (1):
[intel] Add PCI ID for I219-V and -LM 6 to 9
Daniel Johnson (1):
[deflate] Fix typo in comment describing length codes
David Decotigny (2):
[pcbios] Fix "out of memory" detection when expanding bottom area
[pcbios] Take alignment into account when checking for available space
Dentcho Ludmilov Bankov (1):
[comboot] Fix stack pointer retrieval after COM32 binary returns
Ignat Korchagin (3):
[snp] Try promiscuous multicast receive filter if the regular one fails
[snp] Set EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit as per UEFI spec
[efi] Check the status code from AllocatePool()
Joe Groocock (1):
[cmdline] Add "--timeout" parameter to "ifconf" command
Joseph Wong (1):
[bnxt] Add driver support for Broadcom NetXtreme-E Adapters
LaDerrick H (1):
[sfc] Add PCI ID for Solarflare SFC9120 and Solarflare SFC9140
Michael Brown (105):
[init] Show startup and shutdown function names in debug messages
[efi] Blacklist the Dell Ip4ConfigDxe driver
[tls] Support stateful session resumption
[tls] Fix incorrectly duplicated error number
[tls] Support stateless session resumption
[crypto] Use x509_name() in validator debug messages
[tls] Display cross-certificate and OCSP status messages
[tls] Display validator messages only while validation is in progress
[tcp] Display "connecting" status until connection is established
[ocsp] Accept response certID with missing hashAlgorithm parameters
[pci] Add support for PCI MSI-X interrupts
[vlan] Provide vlan_netdev_rx() and vlan_netdev_rx_err()
[intelxl] Use VLAN tag in receive descriptor if present
[intelxl] Allow for virtual function admin queue register maps
[intelxl] Use one admin queue buffer per admin queue descriptor
[intelxl] Allow admin queues to be reinitialised
[intelxl] Allow admin cookie to hold extended opcode and return code
[intelxl] Provide a mechanism for handling "send to VF" events
[intelxl] Use 32-byte receive descriptors
[intelxl] Allow for arbitrary placement of ring tail registers
[intelxl] Split out ring creation from context programming
[intelxl] Allow for arbitrary placement of interrupt control register
[intelxl] Expose functions required by virtual function driver
[intelxl] Choose to operate in non-PXE mode
[intelxl] Add driver for Intel 40 Gigabit Ethernet NIC virtual functions
[build] Fix use of inline assembly on GCC 8 ARM64 builds
[arm] Provide dummy implementations for {in,out}[s]{b,w,l}
[efi] Return only registered EFI devices from efidev_parent()
[fdt] Add ability to parse a MAC address from a flattened device tree
[efi] Register a device tree if provided by the platform firmware
[smsc95xx] Fetch MAC from device tree for Raspberry Pi
[build] Add named configuration for Raspberry Pi
[smscusb] Fetch MAC from device tree for Raspberry Pi Model B+
[build] Do not apply WORKAROUND_CFLAGS for host compiler
[build] Move predefined all-drivers build shortcut to Makefile
[build] Add predefined shortcut for Raspberry Pi builds
[process] Add PROC_INIT() for initialising static processes
[peerdist] Start block download timers from within opener methods
[peerdist] Limit number of concurrent raw block downloads
[tls] Add missing call to tls_tx_resume() when restarting negotiation
[crypto] Drag in configured digestInfo prefixes for any use of RSA
[crypto] Profile the various stages of modular multiplication
[coverity] Override assumptions about wcrtomb() and hmac_init()
[ethernet] Avoid false positive Coverity warning
[golan] Fix address-of-pointer bug for multicast attach/detach
[efi] Report failed control transfers as expected by the USB core
[efi] Do not attempt EFI_USB_IO_PROTOCOL transfers during shutdown
[lan78xx] Always enable automatic speed and duplex detection
[peerdist] Allow PeerDist to be globally enabled or disabled
[peerdist] Allow for the use of a hosted cache server
[build] Construct full version number automatically from git revision
[travis] Ensure that most recent tag is always available
[tftp] Eliminate unnecessary variable-length stack allocation
[infiniband] Eliminate variable-length stack allocation
[slam] Eliminate variable-length stack allocation
[slam] Allow for the possibility of IPv6 multicast addresses
[settings] Eliminate variable-length stack allocation
[iscsi] Eliminate variable-length stack allocations in CHAP handlers
[iscsi] Eliminate variable-length stack allocation in URI parsing
[bios] Define macros for constructing partition table entries
[int13con] Create log partition only when CONSOLE_INT13 is enabled
[efi] Disambiguate errors returned by ConnectController
[png] Fix potential integer overflow
[efi] Work around UEFI specification bug in LoadImage
[efi] Work around UEFI specification bug in LoadImage for SAN boot
[uri] Avoid appearing to access final byte of a potentially empty string
[efi] Attempt to connect our driver directly if ConnectController fails
[tls] Allow a minimum TLS protocol version to be specified
[tls] Default to supporting only TLSv1.1 or above
[crypto] Allow algorithms to be included without being OID-identifiable
[crypto] Ensure that test code drags in required ASN.1 object identifiers
[crypto] Disable MD5 as an OID-identifiable algorithm by default
[snp] Retry initialisation if link is reported as down
[util] Treat empty integer strings as invalid
[parseopt] Treat empty integer strings in user input as invalid
[efi] Enable stack protection where possible
[ocsp] Accept SHA1 certID responses even if SHA1 is not enabled
[intel] Avoid spurious compiler warning on GCC 10
[golan] Add explicit type casts for nodnic_queue_pair_type
[build] Disable position-independent code for ARM64 EFI builds
[efi] Detect and disable seriously broken EFI_RNG_PROTOCOL implementations
[efi] Raise TPL during driver entry point
[axge] Handle non-gigabit link speeds
[usb] Clear device endpoint halt before resetting host endpoint
[usb] Add missing usb_recycle() for completed hub interrupt transfers
[usb] Do not attempt to disable USB3 hub ports
[xhci] Set link state to RxDetect after disabling USB3 root hub port
[usb] Avoid unnecessary calls to usb_hub_set_drvdata()
[xhci] Increase link state settling delay to 100ms
[axge] Reapply USB device configuration when opening network device
[usb] Leave port enabled after a failed device registration
[crypto] Avoid temporarily setting direction flag in bigint_is_geq()
[libc] Provide an unoptimised generic_memcpy_reverse()
[efi] Avoid setting direction flag on EFI platforms
[libc] Add bit-rotation functions for unsigned long values
[efi] Distribute available entropy within stack cookie
[efi] Ensure NUL byte is at lowest address within stack cookie
[efi] Claim SNP devices early in efi_download_start()
[xfer] Remove address family from definition of a socket opener
[dns] Use all configured DNS servers
[wpa] Fix erroneous debug message in wpa_derive_ptk
[efi] Match EDK2 numbering for USB ports
[efi] Use device path to locate filesystem from which we were loaded
[efi] Attempt NII initialisation both with and without cable detection
[build] Fix building on older versions of gcc
Michael J. Bazzinotti (1):
[libc] Fix memcmp() to return proper values
Mohammed (1):
[golan] Add various new PCI device IDs
Rob Taglang (1):
[intelx] Added PCI_ROM entry for Intel x553/x557-AT and x553 (SFP+) NICs
Tobias Kortkamp (1):
[build] Fix a GNUism that FreeBSD's sed(1) cannot deal with
Valentine Barshak (2):
[build] Fix "'%s' directive argument is null" error
[build] Workaround compilation error with gcc 9.1
bit (1):
[build] Fix default target in sdsk image
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This is required by test-qht-par unit test.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
