aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-06-12Lift max memory slots limit imposed by vhost-userRaphael Norwitz
Historically, sending all memory regions to vhost-user backends in a single message imposed a limitation on the number of times memory could be hot-added to a VM with a vhost-user device. Now that backends which support the VHOST_USER_PROTOCOL_F_CONFIGURE_SLOTS send memory regions individually, we no longer need to impose this limitation on devices which support this feature. With this change, VMs with a vhost-user device which supports the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS can support a configurable number of memory slots, up to the maximum allowed by the target platform. Existing backends which do not support VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS are unaffected. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Peter Turschmid <peter.turschm@nutanix.com> Suggested-by: Mike Cui <cui@nutanix.com> Message-Id: <1588533678-23450-6-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-06-12Transmit vhost-user memory regions individuallyRaphael Norwitz
With this change, when the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS protocol feature has been negotiated, Qemu no longer sends the backend all the memory regions in a single message. Rather, when the memory tables are set or updated, a series of VHOST_USER_ADD_MEM_REG and VHOST_USER_REM_MEM_REG messages are sent to transmit the regions to map and/or unmap instead of sending send all the regions in one fixed size VHOST_USER_SET_MEM_TABLE message. The vhost_user struct maintains a shadow state of the VM’s memory regions. When the memory tables are modified, the vhost_user_set_mem_table() function compares the new device memory state to the shadow state and only sends regions which need to be unmapped or mapped in. The regions which must be unmapped are sent first, followed by the new regions to be mapped in. After all the messages have been sent, the shadow state is set to the current virtual device state. Existing backends which do not support VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS are unaffected. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com> Signed-off-by: Peter Turschmid <peter.turschm@nutanix.com> Suggested-by: Mike Cui <cui@nutanix.com> Message-Id: <1588533678-23450-5-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-06-12Add VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTSRaphael Norwitz
This change introduces a new feature to the vhost-user protocol allowing a backend device to specify the maximum number of ram slots it supports. At this point, the value returned by the backend will be capped at the maximum number of ram slots which can be supported by vhost-user, which is currently set to 8 because of underlying protocol limitations. The returned value will be stored inside the VhostUserState struct so that on device reconnect we can verify that the ram slot limitation has not decreased since the last time the device connected. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Peter Turschmid <peter.turschm@nutanix.com> Message-Id: <1588533678-23450-4-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-06-09Add vhost-user helper to get MemoryRegion dataRaphael Norwitz
When setting the memory tables, qemu uses a memory region's userspace address to look up the region's MemoryRegion struct. Among other things, the MemoryRegion contains the region's offset and associated file descriptor, all of which need to be sent to the backend. With VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS, this logic will be needed in multiple places, so before feature support is added it should be moved to a helper function. This helper is also used to simplify the vhost_user_can_merge() function. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1588533678-23450-3-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-06-09Add helper to populate vhost-user message regionsRaphael Norwitz
When setting vhost-user memory tables, memory region descriptors must be copied from the vhost_dev struct to the vhost-user message. To avoid duplicating code in setting the memory tables, we should use a helper to populate this field. This change adds this helper. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1588533678-23450-2-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-06-09vhost-user-blk: delay vhost_user_blk_disconnectDima Stepanov
A socket write during vhost-user communication may trigger a disconnect event, calling vhost_user_blk_disconnect() and clearing all the vhost_dev structures holding data that vhost-user functions expect to remain valid to roll back initialization correctly. Delay the cleanup to keep vhost_dev structure valid. There are two possible states to handle: 1. RUN_STATE_PRELAUNCH: skip bh oneshot call and perform disconnect in the caller routine. 2. RUN_STATE_RUNNING: delay by using bh BH changes are based on the similar changes for the vhost-user-net device: commit e7c83a885f865128ae3cf1946f8cb538b63cbfba "vhost-user: delay vhost_user_stop" Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru> Message-Id: <69b73b94dcd066065595266c852810e0863a0895.1590396396.git.dimastep@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Li Feng <fengli@smartx.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2020-06-09char-socket: return -1 in case of disconnect during tcp_chr_writeDima Stepanov
During testing of the vhost-user-blk reconnect functionality the qemu SIGSEGV was triggered: start qemu as: x86_64-softmmu/qemu-system-x86_64 -m 1024M -M q35 \ -object memory-backend-file,id=ram-node0,size=1024M,mem-path=/dev/shm/qemu,share=on \ -numa node,cpus=0,memdev=ram-node0 \ -chardev socket,id=chardev0,path=./vhost.sock,noserver,reconnect=1 \ -device vhost-user-blk-pci,chardev=chardev0,num-queues=4 --enable-kvm start vhost-user-blk daemon: ./vhost-user-blk -s ./vhost.sock -b test-img.raw If vhost-user-blk will be killed during the vhost initialization process, for instance after getting VHOST_SET_VRING_CALL command, then QEMU will fail with the following backtrace: Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault. 0x00005555559272bb in vhost_user_read (dev=0x7fffef2d53e0, msg=0x7fffffffd5b0) at ./hw/virtio/vhost-user.c:260 260 CharBackend *chr = u->user->chr; #0 0x00005555559272bb in vhost_user_read (dev=0x7fffef2d53e0, msg=0x7fffffffd5b0) at ./hw/virtio/vhost-user.c:260 #1 0x000055555592acb8 in vhost_user_get_config (dev=0x7fffef2d53e0, config=0x7fffef2d5394 "", config_len=60) at ./hw/virtio/vhost-user.c:1645 #2 0x0000555555925525 in vhost_dev_get_config (hdev=0x7fffef2d53e0, config=0x7fffef2d5394 "", config_len=60) at ./hw/virtio/vhost.c:1490 #3 0x00005555558cc46b in vhost_user_blk_device_realize (dev=0x7fffef2d51a0, errp=0x7fffffffd8f0) at ./hw/block/vhost-user-blk.c:429 #4 0x0000555555920090 in virtio_device_realize (dev=0x7fffef2d51a0, errp=0x7fffffffd948) at ./hw/virtio/virtio.c:3615 #5 0x0000555555a9779c in device_set_realized (obj=0x7fffef2d51a0, value=true, errp=0x7fffffffdb88) at ./hw/core/qdev.c:891 ... The problem is that vhost_user_write doesn't get an error after disconnect and try to call vhost_user_read(). The tcp_chr_write() routine should return -1 in case of disconnect. Indicate the EIO error if this routine is called in the disconnected state. Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <aeb7806bfc945faadf09f64dcfa30f59de3ac053.1590396396.git.dimastep@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09hw/pci-host: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
IEC binary prefixes ease code review: the unit is explicit. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200601142930.29408-6-f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-09hw/pci/pci_bridge: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
IEC binary prefixes ease code review: the unit is explicit. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200601142930.29408-5-f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-09hw/pci/pci_bridge: Correct pci_bridge_io memory region sizePhilippe Mathieu-Daudé
memory_region_set_size() handle the 16 Exabytes limit by special-casing the UINT64_MAX value. This is not a problem for the 32-bit maximum, 4 GiB. By using the UINT32_MAX value, the pci_bridge_io MemoryRegion ends up missing 1 byte: (qemu) info mtree memory-region: pci_bridge_io 0000000000000000-00000000fffffffe (prio 0, i/o): pci_bridge_io 0000000000000060-0000000000000060 (prio 0, i/o): i8042-data 0000000000000064-0000000000000064 (prio 0, i/o): i8042-cmd 00000000000001ce-00000000000001d1 (prio 0, i/o): vbe 0000000000000378-000000000000037f (prio 0, i/o): parallel 00000000000003b4-00000000000003b5 (prio 0, i/o): vga ... Fix by using the correct value. We now have: memory-region: pci_bridge_io 0000000000000000-00000000ffffffff (prio 0, i/o): pci_bridge_io 0000000000000060-0000000000000060 (prio 0, i/o): i8042-data 0000000000000064-0000000000000064 (prio 0, i/o): i8042-cmd ... Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200601142930.29408-4-f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-09hw/pci-host/prep: Correct RAVEN bus bridge memory region sizePhilippe Mathieu-Daudé
memory_region_set_size() handle the 16 Exabytes limit by special-casing the UINT64_MAX value. This is not a problem for the 32-bit maximum, 4 GiB. By using the UINT32_MAX value, the bm-raven MemoryRegion ends up missing 1 byte: $ qemu-system-ppc -M prep -S -monitor stdio -usb memory-region: bm-raven 0000000000000000-00000000fffffffe (prio 0, i/o): bm-raven 0000000000000000-000000003effffff (prio 0, i/o): alias bm-pci-memory @pci-memory 0000000000000000-000000003effffff 0000000080000000-00000000ffffffff (prio 0, i/o): alias bm-system @system 0000000000000000-000000007fffffff Fix by using the correct value. We now have: memory-region: bm-raven 0000000000000000-00000000ffffffff (prio 0, i/o): bm-raven 0000000000000000-000000003effffff (prio 0, i/o): alias bm-pci-memory @pci-memory 0000000000000000-000000003effffff 0000000080000000-00000000ffffffff (prio 0, i/o): alias bm-system @system 0000000000000000-000000007fffffff Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200601142930.29408-3-f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-09pci: assert configuration access is within boundsPrasad J Pandit
While accessing PCI configuration bytes, assert that 'address + len' is within PCI configuration space. Generally it is within bounds. This is more of a defensive assert, in case a buggy device was to send 'address' which may go out of bounds. Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Message-Id: <20200604113525.58898-1-ppandit@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09hw/pci/pcie: Move hot plug capability check to pre_plug callbackJulia Suvorova
Check for hot plug capability earlier to avoid removing devices attached during the initialization process. Run qemu with an unattached drive: -drive file=$FILE,if=none,id=drive0 \ -device pcie-root-port,id=rp0,slot=3,bus=pcie.0,hotplug=off Hotplug a block device: device_add virtio-blk-pci,id=blk0,drive=drive0,bus=rp0 If hotplug fails on plug_cb, drive0 will be deleted. Fixes: 0501e1aa1d32a6 ("hw/pci/pcie: Forbid hot-plug if it's disabled on the slot") Acked-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Julia Suvorova <jusual@redhat.com> Message-Id: <20200604125947.881210-1-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09MAINTAINERS: Fix the classification of bios-tables-test-allowed-diff.hThomas Huth
The file tests/qtest/bios-tables-test-allowed-diff.h is currently only assigned to the qtest section according MAINTAINERS. However, this file normally only gets updated when the ACPI tables changed - something the qtest maintainers don't have much clue of. Thus this file should rather be assigned to the ACPI maintainers instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200607052022.12222-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09virtio-balloon: Provide an interface for free page reportingAlexander Duyck
Add support for free page reporting. The idea is to function very similar to how the balloon works in that we basically end up madvising the page as not being used. However we don't really need to bother with any deflate type logic since the page will be faulted back into the guest when it is read or written to. This provides a new way of letting the guest proactively report free pages to the hypervisor, so the hypervisor can reuse them. In contrast to inflate/deflate that is triggered via the hypervisor explicitly. Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Message-Id: <20200527041407.12700.73735.stgit@localhost.localdomain>
2020-06-09virtio-balloon: Implement support for page poison reporting featureAlexander Duyck
We need to make certain to advertise support for page poison reporting if we want to actually get data on if the guest will be poisoning pages. Add a value for reporting the poison value being used if page poisoning is enabled in the guest. With this we can determine if we will need to skip free page reporting when it is enabled in the future. The value currently has no impact on existing balloon interfaces. In the case of existing balloon interfaces the onus is on the guest driver to reapply whatever poison is in place. When we add free page reporting the poison value is used to determine if we can perform in-place page reporting. The expectation is that a reported page will already contain the value specified by the poison, and the reporting of the page should not change that value. Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Message-Id: <20200527041400.12700.33251.stgit@localhost.localdomain>
2020-06-09virtio-balloon: unref the iothread when unrealizingDavid Hildenbrand
We took a reference when realizing, so let's drop that reference when unrealizing. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Fixes: c13c4153f76d ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT") Cc: qemu-stable@nongnu.org Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200520100439.19872-4-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09virtio-balloon: fix free page hinting check on unrealizeDavid Hildenbrand
Checking against guest features is wrong. We allocated data structures based on host features. We can rely on "free_page_bh" as an indicator whether to un-do stuff instead. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Fixes: c13c4153f76d ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT") Cc: qemu-stable@nongnu.org Cc: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200520100439.19872-3-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09virtio-balloon: fix free page hinting without an iothreadDavid Hildenbrand
In case we don't have an iothread, we mark the feature as abscent but still add the queue. 'free_page_bh' remains set to NULL. qemu-system-i386 \ -M microvm \ -nographic \ -device virtio-balloon-device,free-page-hint=true \ -nographic \ -display none \ -monitor none \ -serial none \ -qtest stdio Doing a "write 0xc0000e30 0x24 0x030000000300000003000000030000000300000003000000030000000300000003000000" We will trigger a SEGFAULT. Let's move the check and bail out. While at it, move the static initializations to instance_init(). free_page_report_status and block_iothread are implicitly set to the right values (0/false) already, so drop the initialization. Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Fixes: c13c4153f76d ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT") Reported-by: Alexander Bulekov <alxndr@bu.edu> Cc: qemu-stable@nongnu.org Cc: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200520100439.19872-2-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09bios-tables-test: Generate reference tables for Q35/TPM-TISEric Auger
TPM2, DSDT tables were generated using tests/data/acpi/rebuild-expected-aml.sh Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-Id: <20200609125409.24179-6-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09bios-tables-test: Add Q35/TPM-TIS testEric Auger
Test tables specific to the TPM-TIS instantiation. The TPM2 is added in the framework. Also the DSDT is updated with the TPM. The new function should be be usable for CRB as well, later one. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200609125409.24179-5-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09tests: tpm-emu: Remove assert on TPM2_ST_NO_SESSIONSEric Auger
bios-tables-test executes SeaBIOS. Indeed FW is needed to fetch tables from QEMU and put them into the guest RAM. Also the FW patches cross table pointers. At some point, SeaBIOS ends up calling the TPM2_CC_HierarchyControl command with TPM2_ST_SESSIONS tag, most probably steming from tpm_set_failure/tpm20_hierarchycontrol SeaBIOS call path. This causes an assert() in the qtest tpm emulation code. As the goal here is not to boot SeaBIOS completely but just let it grab the ACPI tables and consolidate them, let's just remove the assert(). Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200609125409.24179-4-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09tests/acpi: Add void tables for Q35/TPM-TIS bios-tables-testEric Auger
Add placeholders for TPM and DSDT reference tables for Q35 TPM-TIS tests and ignore them for the time being. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200609125409.24179-3-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09test/tpm-emu: include sockets and channel headers in tpm-emu headerEric Auger
Include sockets and channel headers to that the header is self-contained. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-Id: <20200609125409.24179-2-eric.auger@redhat.com>
2020-06-09arm/acpi: TPM2 ACPI table supportEric Auger
Add a TPM2 ACPI table if a TPM2.0 sysbus device has been dynamically instantiated. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200601095737.32671-4-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09acpi: Move build_tpm2() in the generic partEric Auger
We plan to build the TPM2 table on ARM too. In order to reuse the generation code, let's move build_tpm2() to aml-build.c. No change in the implementation. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200601095737.32671-3-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09acpi: Convert build_tpm2() to build_append* APIEric Auger
In preparation of its move to the generic acpi code, let's convert build_tpm2() to use build_append API. This latter now is prefered in place of direct ACPI struct field settings with manual endianness conversion. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200601095737.32671-2-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09acpi: tpm: Do not build TCPA table for TPM 2Stefan Berger
Do not build a TCPA table for TPM 2 anymore but create the log area when building the TPM2 table. The TCPA table is only needed for TPM 1.2. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09tests/acpi: update DSDT expected filesMichael S. Tsirkin
Update DSDT after CRS changes and _STA methods dropped. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09acpi: move aml builder code for parallel deviceGerd Hoffmann
Also adds support for multiple LPT devices. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200515150421.25479-8-kraxel@redhat.com>
2020-06-09acpi: parallel: don't use _STA methodGerd Hoffmann
The _STA method dates back to the days where we had a static DSDT. The device is listed in the DSDT table unconditionally and the _STA method checks a bit in the isa bridge pci config space to figure whenever a given is isa device is present or not, then evaluates to 0x0f (present) or 0x00 (absent). These days the DSDT is generated by qemu anyway, so if a device is not present we can simply drop it from the DSDT instead. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200515150421.25479-7-kraxel@redhat.com>
2020-06-09acpi: move aml builder code for serial deviceGerd Hoffmann
The code uses the isa_serial_io array to figure what the device uid is. Side effect is that acpi antries are not limited to port 1+2 any more, we'll also get entries for ports 3+4. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200515150421.25479-6-kraxel@redhat.com>
2020-06-09acpi: serial: don't use _STA methodGerd Hoffmann
The _STA method dates back to the days where we had a static DSDT. The device is listed in the DSDT table unconditionally and the _STA method checks a bit in the isa bridge pci config space to figure whenever a given is isa device is present or not, then evaluates to 0x0f (present) or 0x00 (absent). These days the DSDT is generated by qemu anyway, so if a device is not present we can simply drop it from the DSDT instead. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200515150421.25479-5-kraxel@redhat.com>
2020-06-09acpi: rtc: use a single crs rangeGerd Hoffmann
Use a single io range for _CRS instead of two, following what real hardware does. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200515150421.25479-4-kraxel@redhat.com>
2020-06-09acpi: move aml builder code for rtc deviceGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200515150421.25479-3-kraxel@redhat.com>
2020-06-09qtest: allow DSDT acpi table changesGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20200515150421.25479-2-kraxel@redhat.com>
2020-06-09tests/acpi: update expected SRAT filesVishal Verma
Update expected SRAT files for the change to account for NVDIMM NUMA nodes in the SRAT. AML diffs: tests/data/acpi/pc/SRAT.dimmpxm: Message-Id: <20200606000911.9896-4-vishal.l.verma@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09hw/acpi/nvdimm: add a helper to augment SRAT generationVishal Verma
NVDIMMs can belong to their own proximity domains, as described by the NFIT. In such cases, the SRAT needs to have Memory Affinity structures in the SRAT for these NVDIMMs, otherwise Linux doesn't populate node data structures properly during NUMA initialization. See the following for an example failure case. https://lore.kernel.org/linux-nvdimm/20200416225438.15208-1-vishal.l.verma@intel.com/ Introduce a new helper, nvdimm_build_srat(), and call it for both the i386 and arm versions of 'build_srat()' to augment the SRAT with memory affinity information for NVDIMMs. The relevant command line options to exercise this are below. Nodes 0-1 contain CPUs and regular memory, and nodes 2-3 are the NVDIMM address space. -object memory-backend-ram,id=mem0,size=2048M -numa node,nodeid=0,memdev=mem0, -numa cpu,node-id=0,socket-id=0 -object memory-backend-ram,id=mem1,size=2048M -numa node,nodeid=1,memdev=mem1, -numa cpu,node-id=1,socket-id=1 -numa node,nodeid=2, -object memory-backend-file,id=nvmem0,share,mem-path=nvdimm-0,size=16384M,align=1G -device nvdimm,memdev=nvmem0,id=nv0,label-size=2M,node=2 -numa node,nodeid=3, -object memory-backend-file,id=nvmem1,share,mem-path=nvdimm-1,size=16384M,align=1G -device nvdimm,memdev=nvmem1,id=nv1,label-size=2M,node=3 Cc: Jingqi Liu <jingqi.liu@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Message-Id: <20200606000911.9896-3-vishal.l.verma@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09diffs-allowed: add the SRAT AML to diffs-allowedVishal Verma
In anticipation of a change to the SRAT generation in qemu, add the AML file to diffs-allowed. Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Message-Id: <20200606000911.9896-2-vishal.l.verma@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09msix: allow qword MSI-X table accessesMichael S. Tsirkin
PCI spec says: For all accesses to MSI-X Table and MSI-X PBA fields, software must use aligned full DWORD or aligned full QWORD transactions; otherwise, the result is undefined. However, since MSI-X was converted to use memory API, QEMU started blocking qword transactions, only allowing DWORD ones. Guests do not seem to use QWORD accesses, but let's be spec compliant. Fixes: 95524ae8dc8f ("msix: convert to memory API") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-06-08Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/linux-user-for-5.1-pull-request' into staging linux-user pull request 20200605-v2 Implement F_OFD_ fcntl() command, /proc/cpuinfo for hppa Fix socket(), prnctl() error codes, underflow in target_mremap, epoll_create() strace, oldumount for alpha User-mode build dependencies improvement # gpg: Signature made Sat 06 Jun 2020 14:15:36 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/linux-user-for-5.1-pull-request: stubs: Restrict ui/win32-kbd-hook to system-mode hw/core: Restrict CpuClass::get_crash_info() to system-mode target/s390x: Restrict CpuClass::get_crash_info() to system-mode target/i386: Restrict CpuClass::get_crash_info() to system-mode arch_init: Remove unused 'qapi-commands-misc.h' include exec: Assert CPU migration is not used on user-only build target/riscv/cpu: Restrict CPU migration to system-mode stubs/Makefile: Reduce the user-mode object list util/Makefile: Reduce the user-mode object list tests/Makefile: Restrict some softmmu-only tests tests/Makefile: Only display TCG-related tests when TCG is available configure: Avoid building TCG when not needed Makefile: Only build virtiofsd if system-mode is enabled linux-user: implement OFD locks linux-user/mmap.c: fix integer underflow in target_mremap linux-user/strace.list: fix epoll_create{,1} -strace output linux-user: Add support for /proc/cpuinfo on hppa platform linux-user: return target error codes for socket() and prctl() linux-user, alpha: fix oldumount syscall Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-05Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20200605' into staging target-arm queue: hw/ssi/imx_spi: Handle tx burst lengths other than 8 correctly hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask() hw/arm/pxa2xx: Replace printf() call by qemu_log_mask() target/arm: Convert crypto insns to gvec hw/adc/stm32f2xx_adc: Correct memory region size and access size tests/acceptance: Add a boot test for the xlnx-versal-virt machine docs/system: Document Aspeed boards raspi: Add model of the USB controller target/arm: Convert 2-reg-and-shift and 1-reg-imm Neon insns to decodetree # gpg: Signature made Fri 05 Jun 2020 17:48:39 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20200605: (29 commits) target/arm: Convert Neon one-register-and-immediate insns to decodetree target/arm: Convert VCVT fixed-point ops to decodetree target/arm: Convert Neon VSHLL, VMOVL to decodetree target/arm: Convert Neon narrowing shifts with op==9 to decodetree target/arm: Convert Neon narrowing shifts with op==8 to decodetree target/arm: Convert VQSHLU, VQSHL 2-reg-shift insns to decodetree target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree target/arm: Convert Neon VSHR 2-reg-shift insns to decodetree target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host wire in the dwc-hsotg (dwc2) USB host controller emulation usb: add short-packet handling to usb-storage driver dwc-hsotg (dwc2) USB host controller emulation dwc-hsotg (dwc2) USB host controller state definitions dwc-hsotg (dwc2) USB host controller register definitions raspi: add BCM2835 SOC MPHI emulation docs/system: Document Aspeed boards tests/acceptance: Add a boot test for the xlnx-versal-virt machine hw/adc/stm32f2xx_adc: Correct memory region size and access size target/arm: Split helper_crypto_sm3tt ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-05stubs: Restrict ui/win32-kbd-hook to system-modePhilippe Mathieu-Daudé
In Makefile.objs, the ui/ directory is restricted to system-mode: 43 ifeq ($(CONFIG_SOFTMMU),y) ... 65 common-obj-y += ui/ 66 common-obj-m += ui/ ... 82 endif # CONFIG_SOFTMMU Restrict the ui/ stub added in commit 2df9f5718df to only build it for system-mode emulation. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200522172510.25784-14-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-05hw/core: Restrict CpuClass::get_crash_info() to system-modePhilippe Mathieu-Daudé
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200522172510.25784-13-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-05target/s390x: Restrict CpuClass::get_crash_info() to system-modePhilippe Mathieu-Daudé
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200522172510.25784-12-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-05target/i386: Restrict CpuClass::get_crash_info() to system-modePhilippe Mathieu-Daudé
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200522172510.25784-11-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-05arch_init: Remove unused 'qapi-commands-misc.h' includePhilippe Mathieu-Daudé
Commit ffaee83bcb2 moved qmp_query_target but forgot to remove this include. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200522172510.25784-10-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-05exec: Assert CPU migration is not used on user-only buildPhilippe Mathieu-Daudé
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200522172510.25784-9-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-05target/riscv/cpu: Restrict CPU migration to system-modePhilippe Mathieu-Daudé
Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200522172510.25784-8-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-05stubs/Makefile: Reduce the user-mode object listPhilippe Mathieu-Daudé
These stubs are not required when configured with --disable-system. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Tested-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200522172510.25784-7-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-15 18:08:16 +0000