| Age | Commit message (Collapse) | Author |
|---|
|
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to
auto-generate the vmstate instance ID. Previously it was hard coded
as -1 instead of this macro. It helps to change this default value in
the follow up patches. No functional change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Added type conversions to ram_addr_t before all left shifts of page
indexes to TARGET_PAGE_BITS, to correct overflows when the page
address was 4Gb and more.
Signed-off-by: Alexey Romko <nevilad@yahoo.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
One multifd will lock all the other multifds' IOChannel mutex to inform them
to quit by setting p->quit or shutting down p->c. In this senario, if some
multifds had already been terminated and multifd_load_cleanup/multifd_save_cleanup
had destroyed their mutex, it could cause destroyed mutex access when trying
lock their mutex.
Here is the coredump stack:
#0 0x00007f81a2794437 in raise () from /usr/lib64/libc.so.6
#1 0x00007f81a2795b28 in abort () from /usr/lib64/libc.so.6
#2 0x00007f81a278d1b6 in __assert_fail_base () from /usr/lib64/libc.so.6
#3 0x00007f81a278d262 in __assert_fail () from /usr/lib64/libc.so.6
#4 0x000055eb1bfadbd3 in qemu_mutex_lock_impl (mutex=0x55eb1e2d1988, file=<optimized out>, line=<optimized out>) at util/qemu-thread-posix.c:64
#5 0x000055eb1bb4564a in multifd_send_terminate_threads (err=<optimized out>) at migration/ram.c:1015
#6 0x000055eb1bb4bb7f in multifd_send_thread (opaque=0x55eb1e2d19f8) at migration/ram.c:1171
#7 0x000055eb1bfad628 in qemu_thread_start (args=0x55eb1e170450) at util/qemu-thread-posix.c:502
#8 0x00007f81a2b36df5 in start_thread () from /usr/lib64/libpthread.so.0
#9 0x00007f81a286048d in clone () from /usr/lib64/libc.so.6
To fix it up, let's destroy the mutex after all the other multifd threads had
been terminated.
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Ying Fang <fangying1@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
One multifd channel will shutdown all the other multifd's IOChannel when it
fails to receive an IOChannel. In this senario, if some multifds had not
received its IOChannel yet, it would try to shutdown its IOChannel which could
cause nullptr access at qio_channel_shutdown.
Here is the coredump stack:
#0 object_get_class (obj=obj@entry=0x0) at qom/object.c:908
#1 0x00005563fdbb8f4a in qio_channel_shutdown (ioc=0x0, how=QIO_CHANNEL_SHUTDOWN_BOTH, errp=0x0) at io/channel.c:355
#2 0x00005563fd7b4c5f in multifd_recv_terminate_threads (err=<optimized out>) at migration/ram.c:1280
#3 0x00005563fd7bc019 in multifd_recv_new_channel (ioc=ioc@entry=0x556400255610, errp=errp@entry=0x7ffec07dce00) at migration/ram.c:1478
#4 0x00005563fda82177 in migration_ioc_process_incoming (ioc=ioc@entry=0x556400255610, errp=errp@entry=0x7ffec07dce30) at migration/migration.c:605
#5 0x00005563fda8567d in migration_channel_process_incoming (ioc=0x556400255610) at migration/channel.c:44
#6 0x00005563fda83ee0 in socket_accept_incoming_migration (listener=0x5563fff6b920, cioc=0x556400255610, opaque=<optimized out>) at migration/socket.c:166
#7 0x00005563fdbc25cd in qio_net_listener_channel_func (ioc=<optimized out>, condition=<optimized out>, opaque=<optimized out>) at io/net-listener.c:54
#8 0x00007f895b6fe9a9 in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
#9 0x00005563fdc18136 in glib_pollfds_poll () at util/main-loop.c:218
#10 0x00005563fdc181b5 in os_host_main_loop_wait (timeout=1000000000) at util/main-loop.c:241
#11 0x00005563fdc183a2 in main_loop_wait (nonblocking=nonblocking@entry=0) at util/main-loop.c:517
#12 0x00005563fd8edb37 in main_loop () at vl.c:1791
#13 0x00005563fd74fd45 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4473
To fix it up, let's check p->c before calling qio_channel_shutdown.
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Ying Fang <fangying1@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
We don't support multifd during postcopy, but user still could enable
both multifd and postcopy. This leads to migration failure.
Skip multifd during postcopy.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
This is a preparation for the next patch:
not use multifd during postcopy.
Without enabling postcopy, everything looks good. While after enabling
postcopy, migration may fail even not use multifd during postcopy. The
reason is the pages is not properly cleared and *old* target page will
continue to be transferred.
After clean pages, migration succeeds.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
postcopy requires to place a whole host page, while migration thread
migrate memory in target page size. This makes postcopy need to collect
all target pages in one host page before placing via userfaultfd.
To enable compress during postcopy, there are two problems to solve:
1. Random order for target page arrival
2. Target pages in one host page arrives without interrupt by target
page from other host page
The first one is handled by previous cleanup patch.
This patch handles the second one by:
1. Flush compress thread for each host page
2. Wait for decompress thread for before placing host page
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
After using number of target page received to track one host page, we
could have the capability to handle random order target page arrival in
one host page.
This is a preparation for enabling compress during postcopy.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
For the first target page, all_zero is set to true for this round check.
After target_pages introduced, we could leverage this variable instead
of checking the address offset.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
In postcopy, it requires to place whole host page instead of target
page.
Currently, it relies on the page offset to decide whether this is the
last target page. We also can count the target page number during the
iteration. When the number of target page equals
(host page size / target page size), this means it is the last target
page in the host page.
This is a preparation for non-ordered target page transmission.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Compress is not supported with postcopy, it is safe to wait for
decompress thread just in precopy.
This is a preparation for later patch.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
matches_target_page_size
In this case, page_buffer content would not be used.
Skip this to save some time.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Usually, incoming migration coroutine yields to the main loop
while its IO-channel is waiting for data to receive. But there is a case
when RAM migration and data receive have the same speed: VM with huge
zeroed RAM. In this case, IO-channel won't read and thus the main loop
is stuck and for instance, it doesn't respond to QMP commands.
For this case, yield periodically, but not too often, so as not to
affect the speed of migration.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
savevm_state's SaveStateEntry TAILQ is a priority queue. Priority
sorting is maintained by searching from head to tail for a suitable
insertion spot. Insertion is thus an O(n) operation.
If we instead keep track of the head of each priority's subqueue
within that larger queue we can reduce this operation to O(1) time.
savevm_state_handler_remove() becomes slightly more complex to
accomodate these gains: we need to replace the head of a priority's
subqueue when removing it.
With O(1) insertion, booting VMs with many SaveStateEntry objects is
more plausible. For example, a ppc64 VM with maxmem=8T has 40000 such
objects to insert.
Signed-off-by: Scott Cheloha <cheloha@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Create a function to abstract common logic needed when removing a
SaveStateEntry element from the savevm_state.handlers queue.
For now we just remove the element. Soon it will involve additional
cleanup.
Signed-off-by: Scott Cheloha <cheloha@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
The current check sets an error but doesn't fail the command.
This may cause a problem if new connection attempt by the same URI
affects the first connection.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Clang does not like qmp_migrate_set_downtime()'s code to clamp double
@value to 0..INT64_MAX:
qemu/migration/migration.c:2038:24: error: implicit conversion from 'long' to 'double' changes value from 9223372036854775807 to 9223372036854775808 [-Werror,-Wimplicit-int-float-conversion]
The warning will be enabled by default in clang 10. It is not
available for clang <= 9.
The clamp is actually useless; @value is checked to be within
0..MAX_MIGRATE_DOWNTIME_SECONDS immediately before. Delete it.
While there, make the conversion from double to int64_t explicit.
Signed-off-by: Fangrui Song <i@maskray.me>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Patch split, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
When using hugepages, rate limiting is necessary within each huge
page, since a 1G huge page can take a significant time to send, so
you end up with bursty behaviour.
Fixes: 4c011c37ecb3 ("postcopy: Send whole huge pages")
Reported-by: Lin Ma <LMa@suse.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
ram_save_queue_pages() has an 'err' label that can be replaced by
'return -1' instead.
Same thing with ram_discard_range(), and in this case we can also
get rid of the 'ret' variable and return either '-1' on error
or the result of ram_block_discard_range().
CC: Juan Quintela <quintela@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Commit 1bd71dce4bf2 tries to prevent a finishmigrate -> prelaunch
transition by exiting at the beginning of the main_loop_should_exit()
function if the state is already finishmigrate.
As the finishmigrate state is set in the migration thread it can
happen concurrently to the function. The migration thread and the
function are normally protected by the iothread mutex and thus the
state should no evolve between the start of the function and its end.
Unfortunately during the function life the lock is released by
pause_all_vcpus() just before the point we need to be sure we are
not in finishmigrate state and if the migration thread is waiting
for the lock it will take the opportunity to change the state
to finishmigrate.
The only way to be sure we are not in the finishmigrate state when
we need is to check the state after the pause_all_vcpus() function.
Fixes: 1bd71dce4bf2 ("runstate: ignore exit request in finish migrate state")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
If we are exiting due to an error/finish/.... Just don't try to even
touch the channel with one IO operation.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
We set multifd-channels.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Fill everything with zero, so the padding fields are also initialized.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
'remotes/pmaydell/tags/pull-target-arm-20200117-1' into staging
Add model of the Netduino Plus 2 board
Some allwinner-a10 code cleanup
New test cases for cubieboard
target/arm/arm-semi: fix SYS_OPEN to return nonzero filehandle
i.MX: add an emulation for RNGC device
target/arm: adjust program counter for wfi exception in AArch32
arm/gicv3: update virtual irq state after IAR register read
Set IL bit correctly for syndrome information for data aborts
# gpg: Signature made Fri 17 Jan 2020 14:27:40 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200117-1:
target/arm: Set ISSIs16Bit in make_issinfo
target/arm: Return correct IL bit in merge_syn_data_abort
arm/gicv3: update virtual irq state after IAR register read
target/arm: adjust program counter for wfi exception in AArch32
i.MX: add an emulation for RNGC
target/arm/arm-semi: fix SYS_OPEN to return nonzero filehandle
hw/arm/allwinner-a10: Remove local qemu_irq variables
hw/arm/allwinner-a10: Simplify by passing IRQs with qdev_pass_gpios()
hw/arm/allwinner-a10: Move SoC definitions out of header
tests/boot_linux_console: Add a SD card test for the CubieBoard
tests/boot_linux_console: Add initrd test for the CubieBoard
hw/arm: Add the Netduino Plus 2
hw/arm: Add the STM32F4xx SoC
hw/misc: Add the STM32F4xx EXTI device
hw/misc: Add the STM32F4xx Sysconfig device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/huth-gitlab/tags/pull-request-2020-01-17' into staging
* Various fixes for qtests
* Enable TCG tests with TCI in the gitlab CI
# gpg: Signature made Fri 17 Jan 2020 10:35:17 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-01-17:
gitlab-ci.yml: Run tcg test with tci
tests/qtest/vhost-user-test: Fix memory leaks
migration-test: ppc64: fix FORTH test program
tests: acpi: update path in rebuild-expected-aml
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
During the conversion to decodetree, the setting of
ISSIs16Bit got lost. This causes the guest os to
incorrectly adjust trapping memory operations.
Cc: qemu-stable@nongnu.org
Fixes: 46beb58efbb8a2a32 ("target/arm: Convert T16, load (literal)")
Reported-by: Jeff Kubascik <jeff.kubascik@dornerworks.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200117004618.2742-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The IL bit is set for 32-bit instructions, thus passing false
with the is_16bit parameter to syn_data_abort_with_iss() makes
a syn mask that always has the IL bit set.
Pass is_16bit as true to make the initial syn mask have IL=0,
so that the final IL value comes from or'ing template_syn.
Cc: qemu-stable@nongnu.org
Fixes: aaa1f954d4ca ("target-arm: A64: Create Instruction Syndromes for Data Aborts")
Signed-off-by: Jeff Kubascik <jeff.kubascik@dornerworks.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200117004618.2742-2-richard.henderson@linaro.org
[rth: Extracted this as a self-contained bug fix from a larger patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The IAR0/IAR1 register is used to acknowledge an interrupt - a read of the
register activates the highest priority pending interrupt and provides its
interrupt ID. Activating an interrupt can change the CPU's virtual interrupt
state - this change makes sure the virtual irq state is updated.
Signed-off-by: Jeff Kubascik <jeff.kubascik@dornerworks.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200113154607.97032-1-jeff.kubascik@dornerworks.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The wfi instruction can be configured to be trapped by a higher exception
level, such as the EL2 hypervisor. When the instruction is trapped, the
program counter should contain the address of the wfi instruction that
caused the exception. The program counter is adjusted for this in the wfi op
helper function.
However, this correction is done to env->pc, which only applies to AArch64
mode. For AArch32, the program counter is stored in env->regs[15]. This
adds an if-else statement to modify the correct program counter location
based on the the current CPU mode.
Signed-off-by: Jeff Kubascik <jeff.kubascik@dornerworks.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add an emulation for the RNGC random number generator and the compatible
RNGB variant. These peripherals are included (at least) in imx25 and
imx35 chipsets.
The emulation supports the initial self test, reseeding the prng and
reading random numbers.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
According to the specification "Semihosting for AArch32 and Aarch64",
the SYS_OPEN operation should return:
- A nonzero handle if the call is successful
- -1 if the call is not successful
So, it should never return 0.
Prior to commit 35e9a0a8ce4b ("target/arm/arm-semi: Make semihosting
code hand out its own file descriptors"), the guest fd matched to the
host fd. It returned a nonzero handle on success since the fd 0 is
already used for stdin.
Now that the guest fd is the index of guestfd_array, it starts from 0.
I noticed this issue particularly because Trusted Firmware-A built with
PLAT=qemu is no longer working. Its io_semihosting driver only handles
a positive return value as a valid filehandle.
Basically, there are two ways to fix this:
- Use (guestfd - 1) as the index of guestfs_arrary. We need to insert
increment/decrement to convert the guestfd and the array index back
and forth.
- Keep using guestfd as the index of guestfs_array. The first entry
of guestfs_array is left unused.
I thought the latter is simpler. We end up with wasting a small piece
of memory for the unused first entry of guestfd_array, but this is
probably not a big deal.
Fixes: 35e9a0a8ce4b ("target/arm/arm-semi: Make semihosting code hand out its own file descriptors")
Cc: qemu-stable@nongnu.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200109041228.10131-1-masahiroy@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We won't reuse the CPU IRQ/FIQ variables. Simplify by calling
qdev_get_gpio_in() in place.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
By calling qdev_pass_gpios() we don't need to hold a copy of the
IRQs from the INTC into the SoC state.
Instead of filling an array of qemu_irq and passing it around, we
can now directly call qdev_get_gpio_in() on the SoC.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
These definitions are specific to the A10 SoC and don't need
to be exported to the different Allwinner peripherals.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://docs.armbian.com/Developer-Guide_Build-Preparation/
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado --show=console run -t machine:cubieboard tests/acceptance/boot_linux_console.py
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
[...]
console: ahci-sunxi 1c18000.sata: Linked as a consumer to regulator.4
console: ahci-sunxi 1c18000.sata: controller can't do 64bit DMA, forcing 32bit
console: ahci-sunxi 1c18000.sata: AHCI 0001.0000 32 slots 1 ports 1.5 Gbps 0x1 impl platform mode
console: ahci-sunxi 1c18000.sata: flags: ncq only
console: scsi host0: ahci-sunxi
console: ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 27
console: of_cfs_init
console: of_cfs_init: OK
console: vcc3v0: disabling
console: vcc5v0: disabling
console: usb1-vbus: disabling
console: usb2-vbus: disabling
console: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
console: ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
console: ata1.00: 40960 sectors, multi 16: LBA48 NCQ (depth 32)
console: ata1.00: applying bridge limits
console: ata1.00: configured for UDMA/100
console: scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
console: sd 0:0:0:0: Attached scsi generic sg0 type 0
console: sd 0:0:0:0: [sda] 40960 512-byte logical blocks: (21.0 MB/20.0 MiB)
console: sd 0:0:0:0: [sda] Write Protect is off
console: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
console: sd 0:0:0:0: [sda] Attached SCSI disk
console: EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem
console: EXT4-fs (sda): mounted filesystem without journal. Opts: (null)
console: VFS: Mounted root (ext2 filesystem) readonly on device 8:0.
[...]
console: cat /proc/partitions
console: / # cat /proc/partitions
console: major minor #blocks name
console: 1 0 4096 ram0
console: 1 1 4096 ram1
console: 1 2 4096 ram2
console: 1 3 4096 ram3
console: 8 0 20480 sda
console: reboot
console: / # reboot
[...]
console: sd 0:0:0:0: [sda] Synchronizing SCSI cache
console: reboot: Restarting system
PASS (48.39 s)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191230110953.25496-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This test boots a Linux kernel on a CubieBoard and verify
the serial output is working.
The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://docs.armbian.com/Developer-Guide_Build-Preparation/
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado --show=console run -t machine:cubieboard tests/acceptance/boot_linux_console.py
console: Uncompressing Linux... done, booting the kernel.
console: Booting Linux on physical CPU 0x0
console: Linux version 4.20.7-sunxi (root@armbian.com) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
console: CPU: ARMv7 Processor [410fc080] revision 0 (ARMv7), cr=50c5387d
console: CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
console: OF: fdt: Machine model: Cubietech Cubieboard
[...]
console: Boot successful.
console: cat /proc/cpuinfo
console: / # cat /proc/cpuinfo
console: processor : 0
console: model name : ARMv7 Processor rev 0 (v7l)
console: BogoMIPS : 832.51
[...]
console: Hardware : Allwinner sun4i/sun5i Families
console: Revision : 0000
console: Serial : 0000000000000000
console: cat /proc/iomem
console: / # cat /proc/iomem
console: 01c00000-01c0002f : system-control@1c00000
console: 01c02000-01c02fff : dma-controller@1c02000
console: 01c05000-01c05fff : spi@1c05000
console: 01c0b080-01c0b093 : mdio@1c0b080
console: 01c0c000-01c0cfff : lcd-controller@1c0c000
console: 01c0d000-01c0dfff : lcd-controller@1c0d000
console: 01c0f000-01c0ffff : mmc@1c0f000
[...]
PASS (54.35 s)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20191230110953.25496-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: dad8d8d47f7625913e35e27a1c00f603a6b08f9a.1576658572.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1d145c4c13e5fa140caf131232a6f524c88fcd72.1576658572.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ef941d59fd8658589d34ed432e1d6dfdcf7fb1d0.1576658572.git.alistair@alistair23.me
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 49b01423a09cef2ca832ff73a84a996568f1a8fc.1576658572.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Fix FPSCR masking
# gpg: Signature made Fri 17 Jan 2020 00:51:41 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-or1k-20200116:
target/openrisc: Fix FPCSR mask to allow setting DZF
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add cpu_{ld,st}*_mmuidx_ra
Remove MMU_MODE*_SUFFIX
Move tcg headers under include/
# gpg: Signature made Thu 16 Jan 2020 01:36:41 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20200115: (34 commits)
MAINTAINERS: Replace Claudio Fontana for tcg/aarch64
configure: Remove tcg/ from the preprocessor include search list
tcg: Move TCG headers to include/tcg/
tcg: Search includes in the parent source directory
tcg: Search includes from the project root source directory
cputlb: Expand cpu_ldst_template.h in cputlb.c
cputlb: Remove support for MMU_MODE*_SUFFIX
target/ppc: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIX
target/s390x: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIX
target/mips: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIX
target/m68k: Use cpu_*_mmuidx_ra instead of MMU_MODE{0,1}_SUFFIX
target/xtensa: Remove MMU_MODE{0,1,2,3}_SUFFIX
target/unicore32: Remove MMU_MODE{0,1}_SUFFIX
target/sh4: Remove MMU_MODE{0,1}_SUFFIX
target/microblaze: Remove MMU_MODE{0,1,2}_SUFFIX
target/i386: Remove MMU_MODE{0,1,2}_SUFFIX
target/cris: Remove MMU_MODE{0,1}_SUFFIX
target/alpha: Remove MMU_MODE{0,1}_SUFFIX
target/nios2: Remove MMU_MODE{0,1}_SUFFIX
cputlb: Expand cpu_ldst_useronly_template.h in user-exec.c
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The mask used when setting FPCSR allows setting bits 10 to 1. However,
OpenRISC has flags and config bits in 11 to 1, 11 being Divide by Zero
Flag (DZF). This seems like an off-by-one bug.
This was found when testing the GLIBC test suite which has test cases to
set and clear all bits.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Message-Id: <20200110212843.27335-1-shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Since commit 2f160e0f9797c7522bfd0d09218d0c9340a5137c ("tci: Add
implementation for INDEX_op_ld16u_i64") has been included now, we
can also run the TCG tests with tci, so let's enable them in our
Gitlab CI now.
Message-Id: <20191127155105.3784-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Do not allocate resources in case we return early, and make sure
to free dest_cmdline at the end.
Reported-by: Euler Robot <euler.robot@huawei.com>
Reported-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200116140736.9498-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Commit e51e711b1bef has moved the initialization of start_address and
end_address after the definition of the command line argument,
where the nvramrc is initialized, and thus the loop is between 0 and 0
rather than 1 MiB and 100 MiB.
It doesn't affect the result of the test if all the tests are run in
sequence because the two first tests don't run the loop, so the
values are correctly initialized when we actually need them.
But it hangs when we ask to run only one test, for instance:
QTEST_QEMU_BINARY=ppc64-softmmu/qemu-system-ppc64 \
tests/migration-test -m=quick -p /ppc64/migration/validate_uuid_error
Fixes: e51e711b1bef ("tests/migration: Add migration-test header file")
Cc: wei@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200107163437.52139-1-lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Since commit 1e8a1fae7464("test: Move qtests to a separate
directory") qtests are now placed in a separate folder and
this breaks the script used to rebuild the expected ACPI
tables for bios-tables-test. Update the script with correct
path.
Fixes: 1e8a1fae7464("test: Move qtests to a separate directory")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200114165138.15716-1-shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Commit c4c00922cc introduced the use of the GdkMonitor API, which
was introduced in GTK+ 3.22:
https://developer.gnome.org/gdk3/stable/api-index-3-22.html#api-index-3.22
Unfortunately this break building with older versions, as on Ubuntu
Xenial which provides GTK+ 3.18:
$ lsb_release -cd
Description: Ubuntu 16.04.5 LTS
Codename: xenial
$ ./configure && make
GTK support yes (3.18.9)
GTK GL support no
[...]
CC ui/gtk.o
qemu/ui/gtk.c: In function ‘gd_vc_gfx_init’:
qemu/ui/gtk.c:1973:5: error: unknown type name ‘GdkMonitor’
GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
^
qemu/ui/gtk.c:1973:27: error: implicit declaration of function ‘gdk_display_get_monitor_at_window’ [-Werror=implicit-function-declaration]
GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
^
qemu/ui/gtk.c:1973:5: error: nested extern declaration of ‘gdk_display_get_monitor_at_window’ [-Werror=nested-externs]
GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
^
qemu/ui/gtk.c:1973:27: error: initialization makes pointer from integer without a cast [-Werror=int-conversion]
GdkMonitor *monitor = gdk_display_get_monitor_at_window(dpy, win);
^
qemu/ui/gtk.c:2035:28: error: implicit declaration of function ‘gdk_monitor_get_refresh_rate’ [-Werror=implicit-function-declaration]
refresh_rate_millihz = gdk_monitor_get_refresh_rate(monitor);
^
qemu/ui/gtk.c:2035:5: error: nested extern declaration of ‘gdk_monitor_get_refresh_rate’ [-Werror=nested-externs]
refresh_rate_millihz = gdk_monitor_get_refresh_rate(monitor);
^
cc1: all warnings being treated as errors
qemu/rules.mak:69: recipe for target 'ui/gtk.o' failed
make: *** [ui/gtk.o] Error 1
GTK+ provides convenient definition in <gdk/gdkversionmacros.h>
(already include by <gdk/gdk.h>) to check which API are available.
We only use the GdkMonitor API to get the monitor refresh rate.
Extract this code as a new gd_refresh_rate_millihz() function,
and check GDK_VERSION_3_22 is defined before calling its API.
If it is not defined, return 0. This is safe and fixes our build
failure (see https://travis-ci.org/qemu/qemu/builds/636992508).
Reported-by: Travis-CI
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200116115413.31650-1-philmd@redhat.com
Fixes: c4c00922cc (display/gtk: get proper refreshrate)
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
