aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-09-01qga: move string split in separate functionMarc-André Lureau
The function is going to be reused in a later patch. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01qga: use exit() when parsing optionsMarc-André Lureau
The option parsing is going to be moved to a separate function, use exit() consistently. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01qga: misc spellingMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01configure: qemu-ga: report MSI install support in summaryMichael Roth
Currently we need to examine config-host.mak to determine whether options/probes for MSI package generation had desired result. Report this more prominently in ./configure summary as we do with other guest agent configure options. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01qemu-ga: Fixed paths issue with MSI buildLeonid Bloch
Previously, if building out-of-tree, the MSI build would fail since it wasn't able to find the needed files. Signed-off-by: Leonid Bloch <leonid@daynix.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> * fixed up commit msg formating Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01qemu-ga: Prevent QEMU-GA VSS provider from being unregistered on MSI reinstallLeonid Bloch
Previously, running the .msi would unregister the QEMU GA VSS service if QEMU GA was already installed on the machine, and then register it only if QEMU GA was NOT previously installed. This behavior caused the service to be registered only after the INITIAL installation, and any subsequent run of the .msi (to redo, repair, or upgrade the installation) ended in the service being unregistered. Now, the VSS service is still unregistered if QEMU GA is already installed (so that a fix or an update could be performed) but then it is registered again (if the GA is not being uninstalled) thus finishing the repair/upgrade correctly. Additionally, downgrading is now prevented. If a user would like to downgrade a version, he/she must uninstall the newer version first. Signed-off-by: Leonid Bloch <leonid@daynix.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01qemu-ga: Created a separate component for each installed file in the MSILeonid Bloch
This is done to follow the recommendations given here: https://msdn.microsoft.com/en-us/library/aa368269%28VS.85%29.aspx Signed-off-by: Leonid Bloch <leonid@daynix.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01qemu-ga: Minor cosmetic changes to the WXS fileLeonid Bloch
Signed-off-by: Leonid Bloch <leonid@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01qemu-ga: Fixed GUID capitalizationLeonid Bloch
For compatibility, all the letters in GUID should be capital. Signed-off-by: Leonid Bloch <leonid@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01qemu-ga: Two MSI related cosmetic changesLeonid Bloch
Signed-off-by: Leonid Bloch <leonid@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01qemu-ga: Add .msi files to .gitignoreLeonid Bloch
Signed-off-by: Leonid Bloch <leonid@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-08-28s390: fix softmmu compilationLaurent Vivier
guest_base must be used only in linux-user mode. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-id: 1440757421-9674-1-git-send-email-laurent@vivier.eu Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-28qemu-doc.texi: Fix capitalization error in OS X build instructionsPeter Maydell
Fix a capitalization error in the OS X build instructions; this was picked up in review of commit b352153f5f and intended to be corrected before I applied it, but I accidentally didn't include it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-27From: John Arbuckle <programmingkidx@gmail.com>G 3
qemu-doc.texi: Add information on compiling source code on Mac OS X Add information to the documentation on how to build QEMU on Mac OS X. Signed-off-by: John Arbuckle <programmingkidx@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: fixed a minor capitalization error] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-27Merge remote-tracking branch 'remotes/weil/tags/pull-tci-20150826' into stagingPeter Maydell
tci patch queue # gpg: Signature made Wed 26 Aug 2015 19:51:07 BST using RSA key ID 677450AD # gpg: Good signature from "Stefan Weil <sw@weilnetz.de>" # gpg: aka "Stefan Weil <stefan.weil@weilnetz.de>" # gpg: aka "Stefan Weil <stefan.weil@bib.uni-mannheim.de>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 4923 6FEA 75C9 5D69 8EC2 B78A E08C 21D5 6774 50AD * remotes/weil/tags/pull-tci-20150826: exec-all: Translate TCI return addresses backwards too Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-26exec-all: Translate TCI return addresses backwards tooPeter Crosthwaite
This subtraction of return addresses applies directly to TCI as well as host-TCG. This fixes Linux boots for at least Microblaze, CRIS, ARM and SH4 when using TCI. [sw: Removed indentation for preprocessor statement] [sw: The patch also fixes Linux boot for x86_64] Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-08-26Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/pull-cve-2015-5225-20150826-1' into staging vnc: fix memory corruption (CVE-2015-5225) # gpg: Signature made Wed 26 Aug 2015 17:37:21 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-cve-2015-5225-20150826-1: vnc: fix memory corruption (CVE-2015-5225) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-26vnc: fix memory corruption (CVE-2015-5225)Gerd Hoffmann
The _cmp_bytes variable added by commit "bea60dd ui/vnc: fix potential memory corruption issues" can become negative. Result is (possibly exploitable) memory corruption. Reason for that is it uses the stride instead of bytes per scanline to apply limits. For the server surface is is actually fine. vnc creates that itself, there is never any padding and thus scanline length always equals stride. For the guest surface scanline length and stride are typically identical too, but it doesn't has to be that way. So add and use a new variable (guest_ll) for the guest scanline length. Also rename min_stride to line_bytes to make more clear what it actually is. Finally sprinkle in an assert() to make sure we never use a negative _cmp_bytes again. Reported-by: 范祚至(库特) <zuozhi.fzz@alibaba-inc.com> Reviewed-by: P J P <ppandit@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-08-25Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20150825-1' into staging target-arm queue: * add missing EL2/EL3 TLBI operations * add missing EL2/EL3 ATS operations * add missing EL2/EL3 registers * update Xilinx MAINTAINERS info * Xilinx: connect the four OCM banks # gpg: Signature made Tue 25 Aug 2015 16:22:43 BST using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" * remotes/pmaydell/tags/pull-target-arm-20150825-1: target-arm: Implement AArch64 TLBI operations on IPAs target-arm: Implement missing EL3 TLB invalidate operations target-arm: Implement missing EL2 TLBI operations target-arm: Restrict AArch64 TLB flushes to the MMU indexes they must touch target-arm: Move TLBI ALLE1/ALLE1IS definitions into numeric order cputlb: Add functions for flushing TLB for a single MMU index target-arm: Implement AArch32 ATS1H* operations target-arm: Enable the AArch32 ATS12NSO ops target-arm: Add CP_ACCESS_TRAP_UNCATEGORIZED_EL2, 3 target-arm: Wire up AArch64 EL2 and EL3 address translation ops target-arm: there is no TTBR1 for 32-bit EL2 stage 1 translations target-arm: Implement missing ACTLR registers target-arm: Implement missing AFSR registers target-arm: Implement missing AMAIR registers target-arm: Add missing MAIR_EL3 and TPIDR_EL3 registers MAINTAINERS: Add ZynqMP to MAINTAINERS file MAINTAINERS: Update Xilinx Maintainership xlnx-zynqmp: Connect the four OCM banks Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-25target-arm: Implement AArch64 TLBI operations on IPAsPeter Maydell
Implement the AArch64 TLBI operations which take an intermediate physical address and invalidate stage 2 translations. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1439548879-1972-7-git-send-email-peter.maydell@linaro.org
2015-08-25target-arm: Implement missing EL3 TLB invalidate operationsPeter Maydell
Implement the remaining stage 1 TLB invalidate operations visible from EL3. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1439548879-1972-6-git-send-email-peter.maydell@linaro.org
2015-08-25target-arm: Implement missing EL2 TLBI operationsPeter Maydell
Implement the missing TLBI operations that exist only if EL2 is implemented. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1439548879-1972-5-git-send-email-peter.maydell@linaro.org
2015-08-25target-arm: Restrict AArch64 TLB flushes to the MMU indexes they must touchPeter Maydell
Now we have the ability to flush the TLB only for specific MMU indexes, update the AArch64 TLB maintenance instruction implementations to only flush the parts of the TLB they need to, rather than doing full flushes. We take the opportunity to remove some duplicate functions (the per-asid tlb ops work like the non-per-asid ones because we don't support flushing a TLB only by ASID) and to bring the function names in line with the architectural TLBI operation names. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1439548879-1972-4-git-send-email-peter.maydell@linaro.org
2015-08-25target-arm: Move TLBI ALLE1/ALLE1IS definitions into numeric orderPeter Maydell
Move the two regdefs for TLBI ALLE1 and TLBI ALLE1IS down so that the whole set of AArch64 TLBI regdefs is arranged in numeric order. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1439548879-1972-3-git-send-email-peter.maydell@linaro.org
2015-08-25cputlb: Add functions for flushing TLB for a single MMU indexPeter Maydell
Guest CPU TLB maintenance operations may be sufficiently specialized to only need to flush TLB entries corresponding to a particular MMU index. Implement cputlb functions for this, to avoid the inefficiency of flushing TLB entries which we don't need to. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1439548879-1972-2-git-send-email-peter.maydell@linaro.org
2015-08-25target-arm: Implement AArch32 ATS1H* operationsPeter Maydell
Implement the AArch32 ATS1H* operations which perform Hyp mode stage 1 translations. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1437751263-21913-6-git-send-email-peter.maydell@linaro.org
2015-08-25target-arm: Enable the AArch32 ATS12NSO opsPeter Maydell
Apply the correct conditions in the ats_access() function for the ATS12NSO* address translation operations: * succeed at EL2 or EL3 * normal UNDEF trap from NS EL1 * trap to EL3 from S EL1 (only possible if EL3 is AArch64) (This change means they're now available in our EL3-supporting CPUs when they would previously always UNDEF.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1437751263-21913-5-git-send-email-peter.maydell@linaro.org
2015-08-25target-arm: Add CP_ACCESS_TRAP_UNCATEGORIZED_EL2, 3Peter Maydell
Some coprocessor register access functions need to be able to report "trap to EL3 with an 'uncategorized' syndrome"; add the necessary CPAccessResult enum and handling for it. I don't currently know of any registers that need to trap to EL2 with the 'uncategorized' syndrome, but adding the _EL2 enum as well is trivial and fills in what would otherwise be an odd gap in the handling. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1437751263-21913-4-git-send-email-peter.maydell@linaro.org
2015-08-25target-arm: Wire up AArch64 EL2 and EL3 address translation opsPeter Maydell
Wire up the AArch64 EL2 and EL3 address translation operations (AT S12E1*, AT S12E0*, AT S1E2*, AT S1E3*), and correct some errors in the ats_write64() function in previously unused code that would have done the wrong kind of lookup for accesses from EL3 when SCR.NS==0. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1437751263-21913-3-git-send-email-peter.maydell@linaro.org
2015-08-25target-arm: there is no TTBR1 for 32-bit EL2 stage 1 translationsPeter Maydell
For EL2 stage 1 translations, there is no TTBR1. We were already handling this for 64-bit EL2; add the code to take the 'no TTBR1' code path for 64-bit EL2 as well. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1437751263-21913-2-git-send-email-peter.maydell@linaro.org
2015-08-25target-arm: Implement missing ACTLR registersPeter Maydell
We already implemented ACTLR_EL1; add the missing ACTLR_EL2 and ACTLR_EL3, for consistency. Since we don't currently have any CPUs that need the EL2/EL3 versions to reset to non-zero values, implement as RAZ/WI. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1438281398-18746-5-git-send-email-peter.maydell@linaro.org
2015-08-25target-arm: Implement missing AFSR registersPeter Maydell
The AFSR registers are implementation dependent auxiliary fault status registers. We already implemented a RAZ/WI AFSR0_EL1 and AFSR_EL1; add the missing AFSR{0,1}_EL{2,3} for consistency. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1438281398-18746-4-git-send-email-peter.maydell@linaro.org
2015-08-25target-arm: Implement missing AMAIR registersPeter Maydell
The AMAIR registers are for providing auxiliary implementation defined memory attributes. We already implemented a RAZ/WI AMAIR_EL1; add the EL2 and EL3 versions for consistency. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1438281398-18746-3-git-send-email-peter.maydell@linaro.org
2015-08-25target-arm: Add missing MAIR_EL3 and TPIDR_EL3 registersPeter Maydell
Add the AArch64 registers MAIR_EL3 and TPIDR_EL3, which are the only two which we had implemented the 32-bit Secure equivalents of but not the 64-bit Secure versions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1438281398-18746-2-git-send-email-peter.maydell@linaro.org
2015-08-25MAINTAINERS: Add ZynqMP to MAINTAINERS fileAlistair Francis
Add the Xilinx ZynqMP SoC and EP108 machine to the maintainers file. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: fed078103a0b02cfb3adadbe8e80e4420d554505.1436486024.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-25MAINTAINERS: Update Xilinx MaintainershipAlistair Francis
Peter C is leaving Xilinx, so update the maintainer list to point to Alistair and Edgar from Xilinx and Peter's personal email address. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 54b4c070452bac05aa3a9c1d75899bc097fef831.1436486024.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-25xlnx-zynqmp: Connect the four OCM banksAlistair Francis
The Xilinx EP108 has four separate OCM banks which are located adjacent to each other. This patch adds the four banks to the ZynqMP SoC. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: afa6ba31163a5d541a0bef4b0dc11f2597e0c495.1436813543.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-25Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20150824' into stagingPeter Maydell
queued tcg patches # gpg: Signature made Mon 24 Aug 2015 19:37:15 BST using RSA key ID 4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" * remotes/rth/tags/pull-tcg-20150824: linux-user: remove useless macros GUEST_BASE and RESERVED_VA linux-user: remove --enable-guest-base/--disable-guest-base tcg/aarch64: Use softmmu fast path for unaligned accesses tcg/s390: Use softmmu fast path for unaligned accesses tcg/ppc: Improve unaligned load/store handling on 64-bit backend tcg/i386: use softmmu fast path for unaligned accesses tcg: Remove tcg_gen_trunc_i64_i32 tcg: Split trunc_shr_i32 opcode into extr[lh]_i64_i32 tcg: update README about size changing ops tcg/optimize: add optimizations for ext_i32_i64 and extu_i32_i64 ops tcg: implement real ext_i32_i64 and extu_i32_i64 ops tcg: don't abuse TCG type in tcg_gen_trunc_shr_i64_i32 tcg: rename trunc_shr_i32 into trunc_shr_i64_i32 tcg/optimize: allow constant to have copies tcg/optimize: track const/copy status separately tcg/optimize: add temp_is_const and temp_is_copy functions tcg/optimize: optimize temps tracking tcg/optimize: fix constant signedness Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-24linux-user: remove useless macros GUEST_BASE and RESERVED_VALaurent Vivier
As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base and the macros GUEST_BASE and RESERVED_VA become useless: replace them by their values. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24linux-user: remove --enable-guest-base/--disable-guest-baseLaurent Vivier
All tcg host architectures now support the guest base and as there is no real performance lost, it can be always enabled. Anyway, guest base use can be disabled lively by setting guest base to 0. CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY), it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to use !CONFIG_SOFTMMU instead. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg/aarch64: Use softmmu fast path for unaligned accessesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg/s390: Use softmmu fast path for unaligned accessesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg/ppc: Improve unaligned load/store handling on 64-bit backendBenjamin Herrenschmidt
Currently, we get to the slow path for any unaligned access in the backend, because we effectively preserve the bottom address bits below the alignment requirement when comparing with the TLB entry, so any non-0 bit there will cause the compare to fail. For the same number of instructions, we can instead add the access size - 1 to the address and stick to clearing all the bottom bits. That means that normal unaligned accesses will not fallback (the HW will handle them fine). Only when crossing a page boundary well we end up having a mismatch because we'll end up pointing to the next page which cannot possibly be in that same TLB entry. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Message-Id: <1437455978.5809.2.camel@kernel.crashing.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg/i386: use softmmu fast path for unaligned accessesAurelien Jarno
Softmmu unaligned load/stores currently goes through through the slow path for two reasons: - to support unaligned access on host with strict alignement - to correctly handle accesses crossing pages x86 is only concerned by the second reason. Unaligned accesses are avoided by compilers, but are not uncommon. We therefore would like to see them going through the fast path, if they don't cross pages. For that we can use the fact that two adjacent TLB entries can't contain the same page. Therefore accessing the TLB entry corresponding to the first byte, but comparing its content to page address of the last byte ensures that we don't cross pages. We can do this check without adding more instructions in the TLB code (but increasing its length by one byte) by using the LEA instruction to combine the existing move with the size addition. On an x86-64 host, this gives a 3% boot time improvement for a powerpc guest and 4% for an x86-64 guest. [rth: Tidied calculation of the offset mask] Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <1436467197-2183-1-git-send-email-aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: Remove tcg_gen_trunc_i64_i32Richard Henderson
Replacing it with tcg_gen_extrl_i64_i32. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: Split trunc_shr_i32 opcode into extr[lh]_i64_i32Richard Henderson
Rather than allow arbitrary shift+trunc, only concern ourselves with low and high parts. This is all that was being used anyway. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: update README about size changing opsAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg/optimize: add optimizations for ext_i32_i64 and extu_i32_i64 opsAurelien Jarno
They behave the same as ext32s_i64 and ext32u_i64 from the constant folding and zero propagation point of view, except that they can't be replaced by a mov, so we don't compute the affected value. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: implement real ext_i32_i64 and extu_i32_i64 opsAurelien Jarno
Implement real ext_i32_i64 and extu_i32_i64 ops. They ensure that a 32-bit value is always converted to a 64-bit value and not propagated through the register allocator or the optimizer. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Stefan Weil <sw@weilnetz.de> Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: don't abuse TCG type in tcg_gen_trunc_shr_i64_i32Aurelien Jarno
The tcg_gen_trunc_shr_i64_i32 function takes a 64-bit argument and returns a 32-bit value. Directly call tcg_gen_op3 with the correct types instead of calling tcg_gen_op3i_i32 and abusing the TCG types. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 21:15:38 +0000