aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-10RTC: Get and set time without going through s->current_tmPaolo Bonzini
This patch makes rtc_set_time and rtc_set_cmos work without reading s->current_tm. In the case of rtc_set_time I introduce a new function that retrieves the time and stores into a given struct tm (not hard-coded to s->current_tm). In the case of rtc_set_cmos, the current time is similarly taken from a struct tm rather than s->current_tm. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-10RTC: Do not fire timer periodically to catch next alarmPaolo Bonzini
This patch limits further the usage of a periodic timer. It computes the time of the next alarm, and uses it to skip all intermediate occurrences of the timer. Cc: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-10RTC: Add divider reset supportYang Zhang
The first update cycle begins one-half seconds after divider reset is removed. This feature is useful for testing. Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-10RTC: Update the RTC clock only when reading itYang Zhang
Calculate guest RTC based on the time of the last update, instead of using timers. The formula is (base_rtc + guest_time_now - guest_time_last_update + offset) Base_rtc is the RTC value when the RTC was last updated. Guest_time_now is the guest time when the access happens. Guest_time_last_update was the guest time when the RTC was last updated. Offset is used when divider reset happens or the set bit is toggled. The timer is kept in order to signal interrupts, but it only needs to run when either UF or AF is cleared. When the bits are both set, the timer does not run. UIP is now synthesized when reading register A. If the timer is not set, or if there is more than one second before it (as is the case at the end of this series), the leading edge of UIP is computed and the rising edge occurs 220us later. If the update timer occurs within one second, however, the rising edge of the AF and UF bits should coincide withe the falling edge of UIP. We do not know exactly when this will happen because there could be delays in the servicing of the timer. Hence, in this case reading register A only computes for the rising edge of UIP, and latches the bit until the timer is fired and clears it. Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-10vmstate: add VMSTATE_TIMER_VPaolo Bonzini
Also, for consistency with other occurrences, implement VMSTATE_TIMER as a special case of VMSTATE_TIMER_V rather than VMSTATE_TIMER_TEST. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-10RTC: Update interrupt state when interrupts are masked/unmaskedYang Zhang
If an interrupt flag is already set when the interrupt becomes enabled, raise an interrupt immediately, and vice versa if interrupts become disabled. Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-10RTC: introduce RTC_CLOCK_RATEPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-10RTC: Rename rtc_timer_updateYang Zhang
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-10RTC: Remove the logic to update time format when DM bit changedYang Zhang
Changing the DM (binary/BCD) and 24/12 control bit doesn't affect the internal registers. It only indicates what format is used for those registers. Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-10Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori
* qemu-kvm/uq/master: kvm: i386: Add classic PCI device assignment kvm: i386: Add services required for PCI device assignment kvm: Introduce kvm_has_intx_set_mask kvm: Introduce kvm_irqchip_update_msi_route kvm: Clean up irqfd API qemu: Use valgrind annotations to mark kvm guest memory as defined
2012-09-10Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
* mst/tags/for_anthony: vhost: Pass device path to vhost_dev_init() monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param pcie_aer: clear cmask for Advanced Error Interrupt Message Number pcie: drop version_id field for live migration qemu: add .exrc
2012-09-10socket: don't attempt to reconnect a TCP socket in server modeAnthony Liguori
Commit c3767ed0eb5d0bb25fe409ae5dec06e3411ff1b6 introduced a possible SEGV when using a socket chardev with server=on because it assumes that all TCP sockets are in client mode. This patch adds a check to only reconnect when in client mode. Cc: Lei Li <lilei@linux.vnet.ibm.com> Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-10use --libexecdir instead of ignoring it first and reinventing it laterMichael Tokarev
Commit 7b93fadf3a38d1ed65ea5536a52efc2772c6e3b8 "Add basic version of bridge helper" put the bridge helper executable into a fixed ${prefix}/libexec/ location, instead of using ${libexecdir} for this. At the same time, --libexecdir is being happily ignored by ./configure. Even more, the same patch sets unused $libexecdir variable in the generated config-host.mak, and uses fixed string (\${prefix}/libexecdir) for the bridge helper binary. Fix this braindamage by introducing $libexecdir variable, using it for the bridge helper binary, and recognizing --libexecdir. This patch is applicable to stable-1.1. Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Corey Bryant <coreyb@linux.vnet.ibm.com> Cc: Richa Marwaha <rmarwah@linux.vnet.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-09-10Merge branch 'spice.v59' of git://anongit.freedesktop.org/spice/qemuAurelien Jarno
* 'spice.v59' of git://anongit.freedesktop.org/spice/qemu: Remove #ifdef QXL_COMMAND_FLAG_COMPAT_16BPP qxl: Add set_client_capabilities() interface to QXLInterface spice: make number of surfaces runtime-configurable. configure: print spice-protocol and spice-server versions qxl: add QXL_IO_MONITORS_CONFIG_ASYNC qxl: disallow unknown revisions qxl/update_area_io: guest_bug on invalid parameters spice: increase the verbosity of spice section in "qemu --help" spice: adding seamless-migration option to the command line spice: add 'migrated' flag to spice info spice migration: add QEVENT_SPICE_MIGRATE_COMPLETED spice: notify on vm state change only via spice_server_vm_start/stop spice: notify spice server on vm start/stop spice: abort on invalid streaming cmdline params
2012-09-10Merge branch 'queue/qmp' of git://repo.or.cz/qemu/qmp-unstableAurelien Jarno
* 'queue/qmp' of git://repo.or.cz/qemu/qmp-unstable: tcx: tcx_screen_dump(): add error handling tcx: tcx24_screen_dump(): add error handling g364fb: g364fb_screen_dump(): add error handling omap_lcdc: omap_ppm_save(): add error handling omap_lcdc: rename ppm_save() to omap_ppm_save() vga: ppm_save(): add error handling qapi: convert screendump console: vga_hw_screen_dump_ptr: take Error argument error: add error_setg() json-parser: Fix potential NULL pointer segfault qapi: Fix potential NULL pointer segfault qapi: convert sendkey monitor: move key_defs[] table and introduce two help functions qapi: add the QKeyCode enum qapi: generate list struct and visit_list for enum hmp: rename arguments monitor: rename keyname '<' to 'less' fix doc of using raw values with sendkey Add support for pretty-printing response in qmp-shell
2012-09-10hw/mcf5206: Fix buffer overflow for MBAR read / writeStefan Weil
Report from smatch: mcf5206.c:384 m5206_mbar_readb(7) error: buffer overflow 'm5206_mbar_width' 128 <= 128 mcf5206.c:403 m5206_mbar_readw(8) error: buffer overflow 'm5206_mbar_width' 128 <= 128 mcf5206.c:427 m5206_mbar_readl(8) error: buffer overflow 'm5206_mbar_width' 128 <= 128 mcf5206.c:451 m5206_mbar_writeb(9) error: buffer overflow 'm5206_mbar_width' 128 <= 128 mcf5206.c:475 m5206_mbar_writew(9) error: buffer overflow 'm5206_mbar_width' 128 <= 128 mcf5206.c:503 m5206_mbar_writel(9) error: buffer overflow 'm5206_mbar_width' 128 <= 128 m5206_mbar_width has 0x80 elements and supports 0 <= offset < 0x200. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-10target-arm: Fix potential buffer overflowStefan Weil
Report from smatch: target-arm/helper.c:651 arm946_prbs_read(6) error: buffer overflow 'env->cp15.c6_region' 8 <= 8 target-arm/helper.c:661 arm946_prbs_write(6) error: buffer overflow 'env->cp15.c6_region' 8 <= 8 c7_region is an array with 8 elements, so the index must be less than 8. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-10hw/wm8750: Fix potential buffer overflowStefan Weil
Report from smatch: hw/wm8750.c:369 wm8750_tx(12) error: buffer overflow 's->i2c_data' 2 <= 2 It looks like the preprocessor statements were simply misplaced. Replace also __FUNCTION__ by __func__ to please checkpatch.pl. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-10kvm: i386: Add classic PCI device assignmentJan Kiszka
This adds PCI device assignment for i386 targets using the classic KVM interfaces. This version is 100% identical to what is being maintained in qemu-kvm for several years and is supported by libvirt as well. It is expected to remain relevant for another couple of years until kernels without full-features and performance-wise equivalent VFIO support are obsolete. A refactoring to-do that should be done in-tree is to model MSI and MSI-X support via the generic PCI layer, similar to what VFIO is already doing for MSI-X. This should improve the correctness and clean up the code from duplicate logic. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-10kvm: i386: Add services required for PCI device assignmentJan Kiszka
These helpers abstract the interaction of upcoming pci-assign with the KVM kernel services. Put them under i386 only as other archs will implement device pass-through via VFIO and not this classic interface. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-10kvm: Introduce kvm_has_intx_set_maskJan Kiszka
Will be used by PCI device assignment code. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-10kvm: Introduce kvm_irqchip_update_msi_routeJan Kiszka
This service allows to update an MSI route without releasing/reacquiring the associated VIRQ. Will be used by PCI device assignment, later on likely also by virtio/vhost and VFIO. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-10tcg/s390: fix ld/st with CONFIG_TCG_PASS_AREG0Aurelien Jarno
The load/store slow path has been broken in e141ab52d: - We need to move 4 registers for store functions and 3 registers for load functions and not the reverse. - According to the s390x calling convention the arguments of a function should be zero extended. This means that the register shift should be done with TCG_TYPE_I64 to ensure the higher word is correctly zero extended when needed. I am aware that CONFIG_TCG_PASS_AREG0 is being removed and thus that this patch can be improved, but doing so means it can also be applied to the 1.1 and 1.2 stable branches. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: switch to AREG0 free modeBlue Swirl
Add an explicit CPUState parameter instead of relying on AREG0. Remove temporary wrappers and switch to AREG0 free mode. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> [agraf: fix conflicts] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: avoid AREG0 for misc helpersBlue Swirl
Make misc helpers take a parameter for CPUState instead of relying on global env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> [agraf: fix conflict] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: avoid AREG0 for condition code helpersBlue Swirl
Make condition code helpers take a parameter for CPUState instead of relying on global env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: avoid AREG0 for integer helpersBlue Swirl
Make integer helpers take a parameter for CPUState instead of relying on global env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: avoid AREG0 for FPU helpersBlue Swirl
Make FPU helpers take a parameter for CPUState instead of relying on global env. Introduce temporary wrappers for FPU load and store ops. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: rename op_helper.c to misc_helper.cBlue Swirl
Now op_helper.c contains miscellaneous helpers, rename it to misc_helper.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> [agraf: fix conflict] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: split memory access helpersBlue Swirl
Move memory access helpers to mem_helper.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> [agraf: fold softmmu include ifdefs together] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: split integer helpersBlue Swirl
Move integer helpers to int_helper.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: split condition code helpersBlue Swirl
Move condition code helpers to cc_helper.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: split FPU opsBlue Swirl
Move floating point instructions to fpu_helper.c. While exporting some condition code helpers, avoid duplicate identifier conflict with translate.c. Remove unused set_cc_nz_f64() in translate.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: fix styleBlue Swirl
Before splitting op_helper.c and helper.c in the next patches, fix style issues. No functional changes. Replace also GCC specific __FUNCTION__ with standard __func__. Don't init static variable (cpu_s390x_init:inited) with 0. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-09kvm: Clean up irqfd APIJan Kiszka
No need to expose the fd-based interface, everyone will already be fine with the more handy EventNotifier variant. Rename the latter to clarify that we are still talking about irqfds here. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-09qemu: Use valgrind annotations to mark kvm guest memory as definedChristian Borntraeger
valgrind with kvm produces a big amount of false positives regarding "Conditional jump or move depends on uninitialised value(s)". This happens because the guest memory is allocated with qemu_vmalloc which boils down posix_memalign etc. This function is (correctly) considered by valgrind as returning undefined memory. Since valgrind is based on jitting code, it will not be able to see changes made by the guest to guest memory if this is done by KVM_RUN, thus keeping most of the guest memory undefined. Now lots of places in qemu will then use guest memory to change behaviour. To avoid the flood of these messages, lets declare the whole guest memory as defined. This will reduce the noise and allows us to see real problems. In the future we might want to make this conditional, since there is actually something that we can use those false positives for: These messages will point to code that depends on guest memory, so we can use these backtraces to actually make an audit that is focussed only at those code places. For normal development we dont want to see those messages, though. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-08musicpal: Fix flash mappingJan Kiszka
The old arithmetic assumed 32 physical address bits which is no longer true for ARM since 3cc0cd61f4. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-08Add MAINTAINERS entry for leon3Fabien Chouteau
Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-08target-sparc: fix fcmp{s,d,q} instructions wrt exceptionAurelien Jarno
fcmp{s,d,q} instructions are supposed to ignore quiet NaN (contrary to the fcmpe{s,d,q} instructions), but the current code is wrongly setting the NV exception in that case. Moreover the current code is duplicated: first the arguments are checked for NaN to generate an exception, and later in case the comparison is unordered (which can only happens if one of the argument is a NaN), the same check is done to generate an exception. Fix that by calling clear_float_exceptions() followed by check_ieee_exceptions() as for the other floating point instructions. Use the _compare_quiet functions for fcmp{s,d,q} and the _compare ones for fcmpe{s,d,q}. Simplify the flag setting by not clearing a flag that is set the line just below. This fix allows the math glibc testsuite to pass. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-08target-xtensa: fix missing errno codes for mingw32Max Filippov
Put the following errno value mappings under #ifdef: xtensa-semi.c: In function 'errno_h2g': xtensa-semi.c:113: error: 'ENOTBLK' undeclared (first use in this function) xtensa-semi.c:113: error: (Each undeclared identifier is reported only once xtensa-semi.c:113: error: for each function it appears in.) xtensa-semi.c:113: error: array index in initializer not of integer type xtensa-semi.c:113: error: (near initialization for 'guest_errno') xtensa-semi.c:124: error: 'ETXTBSY' undeclared (first use in this function) xtensa-semi.c:124: error: array index in initializer not of integer type xtensa-semi.c:124: error: (near initialization for 'guest_errno') xtensa-semi.c:134: error: 'ELOOP' undeclared (first use in this function) xtensa-semi.c:134: error: array index in initializer not of integer type xtensa-semi.c:134: error: (near initialization for 'guest_errno') Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-08target-cris: Fix buffer overflowStefan Weil
Report from smatch: target-cris/translate.c:3464 cpu_dump_state(32) error: buffer overflow 'env->sregs' 4 <= 255 sregs is declared 'uint32_t sregs[4][16]', so the first index must be less than 4 or ARRAY_SIZE(env->sregs). Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-09-08MIPS/user: Fix reset CPU state initializationMaciej W. Rozycki
This change updates the CPU reset sequence to use a common piece of code that figures out CPU state flags, fixing the problem with MIPS_HFLAG_COP1X not being set where applicable that causes floating-point MADD family instructions (and other instructions from the MIPS IV FP subset) to trap. As compute_hflags is now shared between op_helper.c and translate.c, the function is now moved to a common header. There are no changes to this function. The problem was seen with the 24Kf MIPS32r2 processor in user emulation. The new approach prevents system and user emulation from diverging -- all the hflags state is initialized in one place now. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-07lan9118: fix multicast filteringAurelien Jarno
The lan9118 emulation tries to compute the multicast index by calling directly the crc32() function from zlib, but fails to get the correct result. Use the common compute_mcast_idx() function instead, which gives the correct result. This fixes IPv6 support. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-07fix entry pointer for ELF kernels loaded with -kernel optionHenning Schild
Find a hopefully proper patch attached. Take it or leave it. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Henning Schild <henning@hennsch.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-07vhost: Pass device path to vhost_dev_init()Stefan Hajnoczi
The path to /dev/vhost-net is currently hardcoded in vhost_dev_init(). This needs to be changed so that /dev/vhost-scsi can be used. Pass in the device path instead of hardcoding it. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-09-07monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_paramNicholas Bellinger
This patch renames+moves the net_handle_fd_param() caller used to obtain a file descriptor from either qemu_parse_fd() (the normal case) or from monitor_get_fd() (migration case) into a generically prefixed monitor_handle_fd_param() to be used by vhost-scsi code. Also update net/[socket,tap].c consumers to use the new prefix. Reported-by: Michael S. Tsirkin <mst@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-09-07pcie_aer: clear cmask for Advanced Error Interrupt Message NumberJason Baron
The Advanced Error Interrupt Message Number (bits 31:27 of the Root Error Status Register) is updated when the number of msi messages assigned to a device changes. Migration of windows 7 on q35 chipset failed because the check in get_pci_config_device() fails due to cmask being set on these bits. Its valid to update these bits and we must restore this state across migration. Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-09-07pcie: drop version_id field for live migrationJason Baron
While testing q35 live migration, I found that the migration would abort with the following error: "Unknown savevm section type 76". The error is due to this check failing in 'vmstate_load_state()': while(field->name) { if ((field->field_exists && field->field_exists(opaque, version_id)) || (!field->field_exists && field->version_id <= version_id)) { The VMSTATE_PCIE_DEVICE() currently has a 'version_id' set to 2. However, 'version_id' in the above check is 1. And thus we fail to load the pcie device field. Further the code returns to 'qemu_loadvm_state()' which produces the error that I saw. I'm proposing to fix this by simply dropping the 'version_id' field from VMSTATE_PCIE_DEVICE(). VMSTATE_PCI_DEVICE() defines no such field and further the vmstate_pcie_device that VMSTATE_PCI_DEVICE() refers to is already versioned. Thus, any versioning issues could be detected at the vmsd level. Taking a step back, I think that the 'field->version_id' should be compared against a saved version number for the field not the 'version_id'. Futhermore, once vmstate_load_state() is called recursively on another vmsd, the check of: if (version_id > vmsd->version_id) { return -EINVAL; } Will never fail since version_id is always equal to vmsd->version_id. So I'm wondering why we aren't storing the vmsd version id of the source in the migration stream? This patch also renames the 'name' field of vmstate_pcie_device from: PCIDevice -> PCIEDevice to differentiate it from vmstate_pci_device. Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-09-07qemu: add .exrcMichael S. Tsirkin
I've been using this to get correct indenting with vim in qemu for a while, but it's a bit easier if we put the settings in the central place. Note that 1. you still need to enable 'exrc' and 'secure' options in your vimrc for these settings to take effect. 2. you can create a .vimrc file if 'exrc' is on but there's need to bypass this configuration. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-09-06hw/pl110: Fix spelling of 'palette'Peter Maydell
Fix the spelling of 'palette' used in various local variables, structure members and comments. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-15 14:54:31 +0000