Age | Commit message (Collapse) | Author |
|
|
|
Currently only common PS2 state is initialized, leaving keyboard and
mouse specific state to contain stale values.
Signed-off-by: Dinesh Subhraveti <dineshs@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Without this, after system reset, hpet does not detect transition from
non-legacy to legacy mode.
Signed-off-by: Beth Kon <eak@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
-S is not honored by qemu on incoming migration. If a domain is migrated
while paused, thus, it will start running on the remote machine; this
is wrong.
Given the trivial patch to fix this, it looks more like a thinko
than anything else, probably dating back to the qemu-kvm merge.
The interesting part is that the -S mechanism was in fact *used* when
migrating (setting autostart = 0) and the incoming migration code was
starting the VM at the end of the migration.
Since I was removing the vm_start from there, I also corrected a related
imprecision. The code was doing a vm_stop "just in case", but we can
be sure that the VM is not running---the vm_start call in vl.c has not
been reached yet. So the vm_stop is removed together with the vm_start.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
This reverts commit accceed914ff6cd0ba9258ff76659141ea24bb62.
This has proven to cause all sorts of odd build breakages. I don't think it's
quite ready for stable.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
When we finish migration, there may be pending async io requests
in flight. If we don't flush it before stage3 starting, it might be
the case that the guest loses it.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
with.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Otherwise if you hot remove an eepro100 NIC and then migrate,
you get:
Unknown savevm section or instance 'eeprom' 0
on the destination side.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
destroy_nic() requires that NICInfo::private by a PCIDevice pointer,
but then goes on to require that the same pointer matches
VLANClientState::opaque.
That is no longer the case for virtio-net since qdev and wasn't
previously the case for rtl8139, ne2k_pci or eepro100.
Make the situation a lot more clear by maintaining a VLANClientState
pointer in NICInfo.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Valgrind was so kind to remark that no one bothers to release keycodes
after use and that something is fishy about cleaning up the requested
keyboard descriptor. With this patch applied, we no longer leak about
12k during startup.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
fix memory leak in cpu_unregister_map_client() and cpu_notify_map_clients().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
vga_screen_dump_blank() was not generating a valid PPM file: the width of the
image made no sense (why it was multiplied by sizeof(uint32_t)?), and there was
only one sample per pixel, instead of three.
(cherry picked from commit 77d4db015c99ce7083fd5b33f0c650176fe8bc98)
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Section 10.8.25 ("START/STOP UNIT Command") of SFF-8020i states that
if the device is locked we should refuse to eject if the device is
locked.
ASC_MEDIA_REMOVAL_PREVENTED is the appropriate return in this case.
In order to stop itself from ejecting the media it is running from,
Fedora's installer (anaconda) requires the CDROMEJECT ioctl() to fail
if the drive has been previously locked.
See also https://bugzilla.redhat.com/501412
(cherry picked from commit aea2a33c73f28ecd8f10b242ecadddcc79c1c28b)
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
User space may only inject interrupts during kvm_arch_pre_run if
ready_for_interrupt_injection is set in kvm_run. But that field is
updated on exit from KVM_RUN, so we must ensure that we enter the
kernel after potentially queuing an interrupt, otherwise we risk to
loose one - like it happens with the current code against latest
kernel modules (since kvm-86) that started to queue only a single
interrupt.
Fix the problem by reordering kvm_cpu_exec.
Credits go to Gleb Natapov for analyzing the issue in details.
(cherry picked from commit 8c14c17395809dfb2b20bd3598e067d2c5af7dc4)
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
As per the IA32 processor manual, the accessed bit is set to 1 in the
processor state after reset. qemu pc cpu_reset code was missing this
accessed bit setting.
(cherry picked from commit 538f368612565f7c7672145c31e87f1d3d02d545)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
(cherry picked from commit 5c5dafdc5ecb2fd5080189e9ea4adcfa4e03ad5d)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Adds CASE_SET_REG24 and fixes the following errors:
lsi_scsi: error: Unhandled writeb 0x24 = 0x0
lsi_scsi: error: Unhandled writeb 0x25 = 0x0
(cherry picked from commit 49c47daa3221aaf3765e9fb77cb98e62a55b7bf8)
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Fixes the following errors:
lsi_scsi: error: Unhandled writeb 0x28 = 0x0
lsi_scsi: error: Unhandled writeb 0x29 = 0x0
lsi_scsi: error: Unhandled writeb 0x2a = 0x0
lsi_scsi: error: Unhandled writeb 0x2b = 0x0
(cherry picked from commit 4b9a2d6de77ccd1e3fb40a0d0c8cd9eddf35e3ab)
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Fixes the following errors:
lsi_scsi: error: Unhandled writeb 0x3a = 0x0
lsi_scsi: error: readb 0x3a
(cherry picked from commit bd8ee11a6b19343f4ad0a1c5d16869584f609369)
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
(cherry picked from commit 537fe2d63f744e7c96ff45b60d09486a81958e06)
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
qemu_aio_wait by invoking the bh or one of the aio completion
callbacks, could end up submitting new pending aio, breaking the
invariant that qemu_aio_flush returns only when no pending aio is
outstanding (possibly a problem for migration as such).
(cherry picked from commit 986c28d655dc9196c9c426c667c1764bd3d6d5bd)
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Kevin Wolf <kwolf@redhat.com>
|
|
It may happen that the io-handler is still registered. That causes
select() to return with EBADF, not calling handlers for other fds.
The io-handler would be registered when (on the source) the whole state
was written but not yet flushed. For example when using QEMUFileBuffered,
(tcp-migration) there may be data left in a buffer waiting to be transferred.
In such a case buffered_close() calls buffered_flush() which calls
migrate_fd_put_buffer, which may, upon EAGAIN, register migrate_fd_put_notify
as a handler.
(cherry picked from commit e19252d32c45e92c919109ec32616382eb2afe6b)
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Sometimes, upon interrupt, fread returns with no data, and
the (incoming exec) migration fails.
Fix by retrying on such a case.
(cherry picked from commit 8a67ec4d84f7db9add9a0b017a968d340fbfb807)
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
(cherry picked from commit d084eab6f820bf914d798a99eaa4f20113f6e151)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
After creating an automated regression test to test the sysrq
responses while running a linux image in qemu, I found that the
simulated uart was eating the character right after the sysrq about
75% of the time.
The problem is that the qemu sets the LSR_DR (data ready) bit on a
serial break. The automated tests can send a break and the sysrq
character quickly enough that the qemu serial fifo has a real
character available. When there is valid character in the fifo, it
gets consumed by the serial driver in the guest OS.
The real hardware also appears to set the LSR_DR but always appears to
have a null byte in this condition. This patch changes the qemu
behavior to match the tested characteristics of a real 16550 chip.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Use timer to separate them in time.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
|
|
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
|
|
In case no symbolic name is provided when requesting VLAN connection via
listening TCP socket ('-net socket,listen=...'), qemu crashes. This
fixes the cause.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
|
|
All,
I've recently been playing around with migration via exec. Unfortunately,
when starting the incoming qemu process with "-incoming exec:cmd", it suffers
the same problem that -incoming tcp used to suffer; namely, that you can't
interact with the monitor until after the migration has happened. This causes
problems for libvirt usage of -incoming exec, since libvirt expects to be able
to access the monitor ahead of time. This fairly simple patch allows you to
access the monitor both before and after the migration has completed using exec.
(note: developed/tested with qemu-kvm, but applies perfectly fine to qemu)
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
raw_pread_aligned currently returns the raw return value from
lseek/read, which is always -1 in case of an error. But the
callers higher up the stack expect it to return the negated
errno just like raw_pwrite_aligned.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Pointer vs addresses a VncDisplay structure,
so it is sufficient to allocate sizeof(VncDisplay)
or sizeof(*vs) bytes instead of the much larger
sizeof(VncState).
Maybe the misleading name should be fixed, too:
the code contains many places where vs is used,
sometimes it is a VncState *, sometimes it is a
VncDisplay *. vd would be a better name.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
When a reset is requested, the current e1000 emulation never clears the
reset bit which may cause a driver to hang. This patch masks the reset
bit out when setting the control registert, so the reset is immediately
completed.
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
KVM_GET_SUPPORTED_CPUID has been known to fail to return -E2BIG
when it runs out of entries. Detect this by always trying again
with a bigger table if the ioctl() fills the table.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Remove cpu features that are not supported by kvm from the cpuid features
reported to the guest.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
QEMU allows adding or removing cpu features by using the syntax '-cpu +feature'
or '-cpu -feature'. Some cpuid features cause more than one bit to be set or
cleared; but QEMU stops after just one bit has been modified, causing the
feature bits to be inconsistent.
Fix by allowing all feature bits corresponding to a given name to be set.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
To be used later.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
kvm does not support all cpu features; add support for dunamically querying
the supported feature set.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Right now, if you try e.g. '-smp 2' you just get 'failed to
initialize KVM'.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
When qemu is run under valgrind, valgrind shows the following output
on exit:
==3648== 1 errors in context 2 of 2:
==3648== Syscall param timer_create(evp) points to uninitialised byte(s)
==3648== at 0x54E936A: timer_create (in /lib/librt-2.9.so)
==3648== by 0x405DCF: dynticks_start_timer (vl.c:1549)
==3648== by 0x40A966: main (vl.c:1726)
==3648== Address 0x7fefffb34 is on thread 1's stack
==3648== Uninitialised value was created by a stack allocation
==3648== at 0x405D60: dynticks_start_timer (vl.c:1534)
This patch is a simple fix to remove this potential problem.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This fixes a SIGSEGV error on qemu exit.
Here is the valgrind output related to this error
==3648== Process terminating with default action of signal 11 (SIGSEGV)
==3648== Access not within mapped region at address 0x8
==3648== at 0x40636B: host_alarm_handler (vl.c:1345)
==3648== by 0x52D807F: (within /lib/libpthread-2.9.so)
==3648== by 0x5C0A12E: tcsetattr (in /lib/libc-2.9.so)
==3648== by 0x4DD601: term_exit (qemu-char.c:700)
==3648== by 0x5B636EC: exit (in /lib/libc-2.9.so)
==3648== by 0x5B4B5AC: (below main) (in /lib/libc-2.9.so)
This simple fix check for a valid pointer as host_alarm_handler is
also called after alarm_timer is released in the exit path.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
initrd must be kept on the memory area below 4g. By not doing this,
we're seeing guests break while using -initrd and values of -mem
superior to 4096.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The migration code is non-blocking, designed for live migration.
Practically migrate_fd_put_buffer busy-loops trying to write, as
on many machines EWOULDBLOCK==EAGAIN (look in include/asm-generic/errno.h).
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This text is no longer accurate. After the patch is applied, the
generated version at http://www.nongnu.org/qemu/qemu-doc.html should be
regenerated.
This patch is also a candidate for the stable branch. (The URL above is
probably generated from the stable branch anyways, so maybe it goes
without saying.)
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|