aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-06hw/irq: Add qemu_irq_split() so one GPIO output can feed two inputsPeter Maydell
Add a qemu_irq_split() function which allows a board to wire a single GPIO output up to two GPIO inputs. This is needed for realview boards, where the MMC card status is visible both in a system register and via a PL061 GPIO module. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-06hw/pl061.c: Implement ARM PL061 as well as Luminary onePeter Maydell
ARM's PL061 has a different set of ID registers to the one in the Luminary Stellaris; implement this so that the Linux driver can identify the Realview PBX PL061 correctly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-06hw/arm_sysctl.c: Wire MCI register MMC card status bits to GPIO inputsPeter Maydell
Implement some GPIO inputs which a board can connect up to set the MMC card status bits in the MCI register. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-06hw/pl181: Implement GPIO output pins for card statusPeter Maydell
Add two GPIO output pins to the PL181 model to indicate the card present and readonly status information. On ARM boards these usually are reflected in a system register. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-06lsi53c895a: Update dnad when skipping MSGOUT bytesStefan Hajnoczi
Update not only dbc but also dnad when skipping bytes during the MSGOUT phase. Previously only dbc was updated which is probably wrong and could lead to bogus message codes being read. Tested on Linux and Windows Server 2003. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-06WIN32: Add missing include for 'struct timeval', used in vnc.hHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-05hw/pcnet.c: Fix EPROM contents to suit AMD netware driversGerhard Wiesinger
bugfix under DOS for AMD netware driver: AMD PCNTNW Ethernet MLID v3.10 (960115), network card not found bugfix works well under DOS with: 1.) AMD NDIS driver v2.0.1 2.) AMD PCNTNW Ethernet MLID v3.10 (960115) 3.) Knoppix 6.2 Signed-off-by: Gerhard Wiesinger <lists@wiesinger.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-05net: fix qemu_can_send_packet logicVincent Palatin
If any of the clients is not ready to receive (ie it has a can_receive callback and can_receive() returns false), we don't want to start sending, else this client may miss/discard the packet. I got this behaviour with the following setup : the emulated machine is using an USB-ethernet adapter, it is connected to the network using SLIRP and I'm dumping the traffic in a .pcap file. As per the following command line : -net nic,model=usb,vlan=1 -net user,vlan=1 -net dump,vlan=1,file=/tmp/pkt.pcap Every time that two packets are coming in a row from the host, the usb-net code will receive the first one, then returns 0 to can_receive call since it has a 1 packet long queue. But as the dump code is always ready to receive, qemu_can_send_packet will return true and the next packet will discard the previous one in the usb-net code. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-05net: fix trace when debug is activated in slirpVincent Palatin
make the code compile correctly when DEBUG is activated. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-03linux-user: fix compile failure if !CONFIG_USE_GUEST_BASEPeter Maydell
If CONFIG_USE_GUEST_BASE is not defined, gcc complains: linux-user/mmap.c:235: error: comparison of unsigned expression >= 0 is always true because RESERVED_VA is #defined to 0. Since mmap_find_vma_reserved() will never be called anyway if RESERVED_VA is always 0, fix this by simply #ifdef'ing away the function and its callsite. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-03virtio-net: Fix lduw_p() pointer argument of wrong sizeStefan Hajnoczi
A pointer to a size_t variable was passed as the void * pointer to lduw_p() in virtio_net_receive(). Instead of acting on the 16-bit value this caused failure on big-endian hosts. Avoid this issue in the future by using stw_p() instead. In general we should use ld*_p() for loading from target memory and st*_p() for storing to target memory anyway, not the other way around. Also tighten up a correct use of lduw_p() when stw_p() should be used instead in virtio_net_get_config(). Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-03target-sh4: move intr_at_halt out of cpu_halted()Aurelien Jarno
All targets except SH4 have the same cpu_halted() routine, and it has only one caller. It is therefore a good candidate for inlining. The difference is the handling of the intr_at_halt, which is necessary to ignore SR.BL when sleeping. Move intr_at_halt handling out of it, by setting this variable while executing the sleep instruction, and clearing it when the CPU has been woken-up by an interrupt, whatever the state of SR.BL. Also rename this variable in_sleep. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-03pxa2xx: port pxa2xx_rtc to using qdev/vmstateAndrzej Zaborowski
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-03-03pxa2xx_dma: Get rid of a forward declaration.Andrzej Zaborowski
2011-03-03pxa2xx_dma: port to qdev/vmstateAndrzej Zaborowski
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-03-03vmstate: move VMSTATE_PCIE_AER_ERRS to hw/hw.hDmitry Eremin-Solenikov
VMSTATE_PCIE_AER_ERRS is indeed useful for other emulation drivers. Move it to hw/hw.h under the name of VMSTATE_STRUCT_VARRAY_POINTER_UINT16. Also add VMSTATE_STRUCT_VARRAY_POINTER_INT32 which is more or less the same as _UINT16 macro, except the fact it uses int32_t internally. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-03-03pxa2xx_dma: drop unused pxa2xx_dma_handler_t/handler fieldDmitry Eremin-Solenikov
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-03-03pxa2xx_timer: Store relevant irq line in each timer.Andrzej Zaborowski
2011-03-03pxa2xx_timer: switch to using qdev/vmstateDmitry Eremin-Solenikov
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-03-03pxa2xx_timer: change info struct name to comply with guidelinesDmitry Eremin-Solenikov
It should be PXA2xxTimerInfo, not pxa2xx_timer_info. Replace all occurences of old name with the new one. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-03-03pxa2xx_pic: Set base address for sysbus device.Andrzej Zaborowski
Thid device's registration was broken since e1f8c729fa890c67bb4532f22c22ace6fb0e1aaf, this should fix it.
2011-03-03vmstate: add VMSTATE_STRUCT_ARRAY_TESTDmitry Eremin-Solenikov
This is a _TEST variant of VMSTATE_STRUCT_ARRAY, necessary e.g. for future patch changing pxa2xx_timer to use vmstate. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-03-01microblaze: Correct copy+paste:o in defconfigsEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-02-25HACKING: Update status of format checkingStefan Weil
Hopefully all functions with printf like arguments now use format checking. This was tested with default build configuration on linux and windows hosts (including some cross compilations), so chances are good that there remain few (if any) functions without format checking. Therefore the last comment in HACKING is no longer valid but misleading. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-25vnc: fix a memory leak in threaded vnc serverCorentin Chary
VncJobQueue's buffer is intended to be used for as the output buffer for all operations in this queue, but unfortunatly. vnc_async_encoding_start() is in charge of setting this buffer as the current output buffer, but vnc_async_encoding_end() was not writting the changes back to VncJobQueue, resulting in a big and ugly memleak. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-25Use sigwait instead of sigwaitinfo.Tristan Gingold
Fix compilation failure on Darwin. Signed-off-by: Tristan Gingold <gingold@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-25bitops: fix error on OpenBSD and mingw32Blue Swirl
Fix this error: CC bitops.o In file included from /src/qemu/bitops.c:14: /src/qemu/bitops.h:69: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'unsigned' Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-25bitops: fix test_and_change_bit()Corentin Chary
./bitops.h:192: warning: ‘old’ is used uninitialized in this function Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-25slirp: Remove some type casts caused by bad declaration of x.tp_bufStefan Weil
x.tp_buf was declared as a uint8_t array, but always used as a char array (which needed a lot of type casts). The patch includes these changes: * Fix declaration of x.tp_buf and remove all type casts. * Use offsetof() to get the offset of x.tp_buf. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-25Fixing tap adapter for win32Pavel Dovgaluk
This fix allows connection of internal VLAN to the external TAP interface. If tap_win32_write function always returns 0, the TAP network interface in QEMU is disabled. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-25Fixing network over sockets implementation for win32Pavel Dovgaluk
MSDN includes the following in WSAEALREADY error description for connect() function: "To preserve backward compatibility, this error is reported as WSAEINVAL to Winsock applications that link to either Winsock.dll or Wsock32.dll". So check of this error code was added to allow network connections through the sockets in Windows. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-25pxa2xx_pic: update to use qdevDmitry Eremin-Solenikov
Use qdev/sysbus framework to handle pxa2xx-pic. Instead of exposing IRQs via array, reference them via qdev_get_gpio_in(). Patch has been modified by the committer. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-02-25mst_fpga: correct irq level settingsDmitry Eremin-Solenikov
Final corrections for IRQ levels that are set by mst_fpga: * Don't retranslate IRQ if previously IRQ was masked. * After setting or clearing IRQs through register, apply mask before setting parent IRQ level. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-02-24ui/vnc-enc-tight.c: Fix compile failure if CONFIG_VNC_JPEG not definedPeter Maydell
Add some missing #ifdefs to fix compilation failures in the !CONFIG_VNC_JPEG case introduced by commit ce702e93. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-24virtio-serial: kill VirtIOSerialDeviceGerd Hoffmann
VirtIOSerialDevice is like VirtIOSerialPort with just the first two fields, which makes it pretty pointless. Using VirtIOSerialPort directly works equally well and is less confusing. [Amit: - rebase - rename 'dev' to 'port' in function params in virtio-serial.h ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-24Add TAGS and *~ to .gitignoreDavid Gibson
Add the etags output generated by "make TAGS" and editor backup files to .gitignore. This patch has previously appeared in my series of patches to add pSeries emulation support. However, it obviously has no real connection to that, and can be applied seperately. Please apply. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-24target-arm: fix support for VRSQRTE.Christophe Lyon
Now use the same algorithm as described in the ARM ARM. Signed-off-by: Christophe Lyon <christophe.lyon@st.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-24target-arm: fix support for VRECPE.Christophe Lyon
Now use the same algorithm as described in the ARM ARM. Signed-off-by: Christophe Lyon <christophe.lyon@st.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-24target-arm: Introduce float64_256 and float64_512 constants.Christophe Lyon
These two constants will be used by helper functions such as recpe_f32 and rsqrte_f32. Signed-off-by: Christophe Lyon <christophe.lyon@st.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-24softfloat: add _set_sign(), _infinity and _half for 32 and 64 bits floats.Christophe Lyon
These constants and utility function are needed to implement some helpers. Defining constants avoids the need to re-compute them at runtime. Signed-off-by: Christophe Lyon <christophe.lyon@st.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-24softfloat: move all default NaN definitions to softfloat.h.Christophe Lyon
These special values are needed to implement some helper functions, which return/use these values in some cases. Signed-off-by: Christophe Lyon <christophe.lyon@st.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-24hw/sd.c: Add missing state change for SD_STATUS, SEND_NUM_WR_BLOCKSPeter Maydell
The SD_STATUS and SEND_NUM_WR_BLOCKS commands are supposed to cause the card to send data back to the host. However sd.c was missing the state change to sd_sendingdata_state for these commands, with the effect that the Linux driver would either hang indefinitely waiting for nonexistent data (pl181) or read zeroes and provoke a qemu warning message (omap). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-23vnc: Fix fatal crash with vnc reverse modeStefan Weil
Reverse mode is unusable: qemu -vnc localhost:5500,reverse crashes in vnc_refresh_server_surface because some pointers are NULL. Fix this by calling vnc_dpy_resize (which initializes these pointers) before calling vnc_refresh. Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-23vnc: add a non-adaptive optionCorentin Chary
This option allow to disable adaptive behaviors in some encodings. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-23vnc: tight: tweak adaptive tight settingsCorentin Chary
The force_jpeg threshold was too low. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-23vnc: don't try to send bigger updates that client heightCorentin Chary
Respect client size if it doesn't not support desktop resizing. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-23vnc: use the new generic bitmap functionsCorentin Chary
Switch to bitmap.h and bitops.h instead of redefining our own bitmap helpers. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-23bitmap: add a generic bitmap and bitops libraryCorentin Chary
Add most used bitmap and bitops functions into bitmap.c and bitops.c. Theses functions are mostly copied from Linux kernel source. Some of these functions are already redefined in the VNC server. Some of them could be used for some block stuff. The yet yo be submitted NUMA work also need bitmaps. bitops_ffsl() and bitops_flsl() are here because bitops/bitmap works on unsigned long, not int, and we can't use current code because: * ffs only works on int * qemu_fls only works on int * ffsl is a GNU extension Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-23vnc: fix lossy rect refreshingCorentin Chary
The for loop in send_lossy_rect was totally wrong, and we can't call vnc_set_bits() because it does not really do what it should. Use vnc_set_bit() directly instead. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-23vnc: fix uint8_t comparisons with negative valuesCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-18 19:56:44 +0000