aboutsummaryrefslogtreecommitdiff
path: root/.travis.yml
AgeCommit message (Collapse)Author
2020-07-15.travis.yml: skip ppc64abi32-linux-user with pluginsAlex Bennée
We actually see failures on threadcount running without plugins: retry.py -n 1000 -c -- \ ./ppc64abi32-linux-user/qemu-ppc64abi32 \ ./tests/tcg/ppc64abi32-linux-user/threadcount which reports: 0: 978 times (97.80%), avg time 0.270 (0.01 varience/0.08 deviation) -6: 21 times (2.10%), avg time 0.336 (0.01 varience/0.12 deviation) -11: 1 times (0.10%), avg time 0.502 (0.00 varience/0.00 deviation) Ran command 1000 times, 978 passes But when running with plugins we hit the failure a lot more often: 0: 91 times (91.00%), avg time 0.302 (0.04 varience/0.19 deviation) -11: 9 times (9.00%), avg time 0.558 (0.01 varience/0.11 deviation) Ran command 100 times, 91 passes The crash occurs in guest code which is the same in both pass and fail cases. However we see various messages reported on the console about corrupted memory lists which seems to imply the guest memory allocation is corrupted. This lines up with the seg fault being in the guest __libc_free function. So we think this is a guest bug which is exacerbated by various modes of translation. If anyone has access to real hardware to soak test the test case we could prove this properly. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200714175516.5475-1-alex.bennee@linaro.org>
2020-07-11travis.yml: Test also the other targets on s390xThomas Huth
s390x is our only big endian host in our CI, so building and testing QEMU there is quite valuable. Thus let's also test the other targets with additional jobs (also using different sets of pre-installed libraries to get a better coverage of the things that we test). Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200608114049.4693-1-thuth@redhat.com>
2020-07-11gitlab: add acceptance testing to system buildsAlex Bennée
As part of migrating things from Travis to GitLab add the acceptance tests. To do this: - rename system1 to system-ubuntu-main - rename system2 to system-fedora-misc - split into build/check/acceptance - remove -j from check stages - use artifacts to save build stage - add post acceptance template and use Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200701135652.1366-31-alex.bennee@linaro.org>
2020-06-15configure: Let SLOF be initialized by ./scripts/git-submodule.shPhilippe Mathieu-Daudé
The git-submodule.sh script is called by make and initialize the submodules listed in the GIT_SUBMODULES variable generated by ./configure. SLOF is required for building the s390-ccw firmware on s390x, since it is using the libnet code from SLOF for network booting. Add it to the GIT_SUBMODULES when building the s390-ccw firmware. Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200615074919.12552-1-f4bug@amsat.org> [thuth: Tweaked the commit message a little bit] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-06-15tests/acceptance: Add boot tests for sh4 QEMU advent calendar imageThomas Huth
Now that we can select the second serial console in the acceptance tests (see commit 746f244d9720 "Allow to use other serial consoles than default"), we can also test the sh4 image from the QEMU advent calendar 2018. Message-Id: <20200515164337.4899-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-06-08.travis.yml: allow failure for unreliable hostsAlex Bennée
They will still run but they won't get in the way of the result. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200605154929.26910-6-alex.bennee@linaro.org>
2020-05-27travis.yml: Use clang++ in the Clang testsThomas Huth
Our configure script does not look for clang++ automatically, so we should use --cxx=clang++ to make sure that we test our C++ code with Clang, too. And while we're at it, also use --host-cc=clang here to avoid that we use the normal "cc" as host C compiler. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200518083316.25065-1-thuth@redhat.com> Message-Id: <20200520140541.30256-4-alex.bennee@linaro.org>
2020-05-15travis.yml: Improve the --disable-tcg test on s390xThomas Huth
Since the s390x containers do not allow KVM, we only compile-test the --disable-tcg build on s390x and do not run the qtests. Thus, it does not make sense to install genisoimage here, and it also does not make sense to build the s390-ccw.img here again - it is simply not used without the qtests. On the other hand, if we do not build the s390-ccw.img anymore, we can also compile with Clang - so let's use that compiler here to get some additional test coverage. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200512133849.10624-1-thuth@redhat.com> Message-Id: <20200513175134.19619-3-alex.bennee@linaro.org>
2020-05-06.travis.yml: reduce the load on [ppc64] GCC check-tcgAlex Bennée
This seems to be timing out quite often and occasionally running out of disk space. Relegate it to light duties. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200501111505.4225-5-alex.bennee@linaro.org>
2020-05-06.travis.yml: drop MacOSXAlex Bennée
This keeps breaking on Travis so lets just fall back to the Cirrus CI builds which seem to be better maintained. Fix up the comments while we are doing this as we never had a windows build. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200501111505.4225-3-alex.bennee@linaro.org>
2020-05-06.travis.yml: show free disk space at end of runAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200501111505.4225-2-alex.bennee@linaro.org>
2020-04-06.travis.yml: Cache acceptance-test assetsPhilippe Mathieu-Daudé
Keep all acceptance-test assets in the same cache bucket. As of v5.0.0-rc1, the cache is 2610.11MB: https://travis-ci.org/github/philmd/qemu/jobs/670558103 Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200403172919.24621-6-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-03-27.travis.yml: Add a KVM-only s390x jobPhilippe Mathieu-Daudé
Add a job to build QEMU on s390x with TCG disabled, so this configuration won't bitrot over time. This job is quick, running check-unit: Ran for 5 min 30 sec https://travis-ci.org/github/philmd/qemu/jobs/665456423 Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200322154015.25358-1-philmd@redhat.com> Message-Id: <20200323161514.23952-12-alex.bennee@linaro.org>
2020-03-19Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' ↵Peter Maydell
into staging Python and tests (mostly acceptance) patches 2020-03-17 # gpg: Signature made Wed 18 Mar 2020 00:16:03 GMT # gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3 # gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3 * remotes/cleber/tags/python-next-pull-request: tests/docker: make "buildah bud" output similar to "docker build" tests/docker: add CentOS 8 Dockerfile Acceptance tests: add make targets to download images Acceptance test: add "boot_linux" tests Acceptance tests: introduce BUILD_DIR and SOURCE_DIR python/qemu/qmp.py: QMP debug with VM label Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-17Acceptance test: add "boot_linux" testsCleber Rosa
This acceptance test, validates that a full blown Linux guest can successfully boot in QEMU. In this specific case, the guest chosen is Fedora version 31. * x86_64, pc-i440fx and pc-q35 machine types, with TCG and KVM as accelerators * aarch64 and virt machine type, with TCG and KVM as accelerators * ppc64 and pseries machine type with TCG as accelerator * s390x and s390-ccw-virtio machine type with TCG as accelerator The Avocado vmimage utils library is used to download and cache the Linux guest images, and from those images a snapshot image is created and given to QEMU. If a qemu-img binary is available in the build directory, it's used to create the snapshot image, so that matching qemu-system-* and qemu-img are used in the same test run. If qemu-img is not available in the build tree, one is attempted to be found installed system-wide (in the $PATH). If qemu-img is not found in the build dir or in the $PATH, the test is canceled. The method for checking the successful boot is based on "cloudinit" and its "phone home" feature. The guest is given an ISO image with the location of the phone home server, and the information to post (the instance ID). Upon receiving the correct information, from the guest, the test is considered to have PASSed. This test is currently limited to user mode networking only, and instructs the guest to connect to the "router" address that is hard coded in QEMU. To create the cloudinit ISO image that will be used to configure the guest, the pycdlib library is also required and has been added as requirement to the virtual environment created by "check-venv". The console output is read by a separate thread, by means of the Avocado datadrainer utility module. Signed-off-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Tested-by: Willian Rampazzo <willianr@redhat.com> Message-Id: <20200317141654.29355-3-crosa@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
2020-03-17travis.yml: Set G_MESSAGES_DEBUG do report GLib errorsPhilippe Mathieu-Daudé
Since commit f5852efa293 we can display GLib errors with the QEMU error reporting API. Set it to the 'error' level, as this helps understanding failures from QEMU calls to GLib on Travis-CI. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200316101544.22361-1-philmd@redhat.com> Message-Id: <20200316172155.971-6-alex.bennee@linaro.org>
2020-03-04travis.yml: install python3 numpy and opencv librariesAlex Bennée
These are used for the acceptance framebuffer tests to count Tux. As we need slightly newer python3 for opencv we bump up to bionic. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200303150622.20133-10-alex.bennee@linaro.org>
2020-03-04travis: enable tools build on OS XLaurent Vivier
As we can build tools on OS X we should check we don't break build when we submit new codes. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200302154630.45620-3-lvivier@redhat.com> Message-Id: <20200303150622.20133-7-alex.bennee@linaro.org>
2020-02-28configure: Enable test and libs for zstdJuan Quintela
Add it to several build systems to make testing good. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-25travis.yml: single-thread build-tcg stagesAlex Bennée
This still seems to be a problem for Travis. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200225124710.14152-8-alex.bennee@linaro.org>
2020-02-25travis.yml: Fix Travis YAML configuration warningsWainer dos Santos Moschetta
This fixes the following warnings Travis has detected on the YAML configuration: - 'on root: missing os, using the default "linux"' - 'on root: the key matrix is an alias for jobs, using jobs' - 'on jobs.include.python: unexpected sequence, using the first value (3.5)' - 'on jobs.include.python: unexpected sequence, using the first value (3.6)' Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200207210124.141119-2-wainersm@redhat.com> Message-Id: <20200225124710.14152-7-alex.bennee@linaro.org>
2020-02-25travis.yml: Test the s390-ccw build, tooThomas Huth
Since we can now use a s390x host on Travis, we can also build and test the s390-ccw bios images there. For this we have to make sure that roms/SLOF is checked out, too, and then move the generated *.img files to the right location before running the tests. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200206202543.7085-1-thuth@redhat.com> Message-Id: <20200225124710.14152-6-alex.bennee@linaro.org>
2020-02-07tests/acceptance: Add boot tests for some of the QEMU advent calendar imagesThomas Huth
The 2018 edition of the QEMU advent calendar 2018 featured Linux images for various non-x86 machines. We can use them for a boot tests in our acceptance test suite. Let's also make sure that we build the corresponding machines in Travis. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20200124170325.30072-1-thuth@redhat.com> [PMD: Rebased, --python=python3 parameter dropped in commit 5311cb12e] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-07travis.yml: install rpm2cpio for acceptance testsLiam Merwick
The extract_from_rpm() method added for the PVH acceptance tests needs rpm2cpio to extract a vmlinux binary from an RPM. Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1580914565-19675-4-git-send-email-liam.merwick@oracle.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-04.travis.yml: ensure python3-sphinx installed for docsAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200204105142.21845-1-alex.bennee@linaro.org>
2020-02-04.travis.yml: single thread build-tcgAlex Bennée
I've theorised that a parallel build-tcg is somehow getting confused when two fedora-30 based cross compilers attempt to build at the same time. From one data-point so far this may fix the problem although the plugins job runs quite close to timeout. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200203090932.19147-18-alex.bennee@linaro.org>
2020-02-04.travis.yml: drop cris-linux-user from the plugins testAlex Bennée
While it shouldn't cause problems we will never get useful information from cris as it has yet to be converted to the common translator loop. It also causes the Travis CI to fail for weird reasons which I have so far been unable to replicate on a normal Xenial system. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200203090932.19147-17-alex.bennee@linaro.org>
2020-02-04.travis.yml: drop the travis_retry from testsAlex Bennée
This was a crutch when we introduced it - however it does have the disadvantage of causing tests to timeout with large amounts of logs. Lets drop it and see if the stability has improved since. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200203090932.19147-16-alex.bennee@linaro.org>
2020-02-04.travis.yml: introduce TEST_BUILD_CMD and use it for check-tcgAlex Bennée
At least for check-tcg we can split the build phase from the test phase and do the former in parallel. While we are at it drop the V=1 for the check-tcg part as it just generates a lot more noise in the logs. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200203090932.19147-15-alex.bennee@linaro.org>
2020-02-04.travis.yml: probe for number of available processorsAlex Bennée
The arm64 hardware was especially hit by only building on 3 of the 32 available cores. Introduce a JOBS environment variable which we use for all parallel builds. We still run the main checks single threaded though so to make it easier to spot hangs. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200203090932.19147-12-alex.bennee@linaro.org>
2020-02-04.travis.yml: move cache flushing to early common phaseAlex Bennée
We shall be adding more common early setup in a future commit. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200203090932.19147-11-alex.bennee@linaro.org>
2020-02-04.travis.yml: build documents under bionicAlex Bennée
It looks like the xenial tooling doesn't like something in our setup. We should probably be moving to bionic for everything soon anyway (libssh aside). Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200203090932.19147-10-alex.bennee@linaro.org>
2020-02-04.travis.yml: Add description to each jobPhilippe Mathieu-Daudé
The NAME variable can be used to describe nicely a job (see [*]). As we currently have 32 jobs, use it. This helps for quickly finding a particular job. before: https://travis-ci.org/qemu/qemu/builds/639887646 after: https://travis-ci.org/philmd/qemu/builds/641795043 [*] https://docs.travis-ci.com/user/customizing-the-build/#naming-jobs-within-matrices Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200125183135.28317-1-f4bug@amsat.org> Message-Id: <20200203090932.19147-9-alex.bennee@linaro.org>
2020-02-04.travis.yml: Drop superfluous use of --python=python3 parameterPhilippe Mathieu-Daudé
As we require Python3 since commit ddf9069963, we don't need to explicit it with the --python=/usr/bin/python3 configure option. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200125184217.30034-1-f4bug@amsat.org> Message-Id: <20200203090932.19147-8-alex.bennee@linaro.org>
2020-02-04travis.yml: Install genisoimage packageWainer dos Santos Moschetta
The genisoimage program is required for tests/cdrom-test tests, otherwise they are skipped. The current Travis environments do not provide it by default, so let's explicitly require the genisoimage package. Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200110191254.11303-2-wainersm@redhat.com> Message-Id: <20200203090932.19147-5-alex.bennee@linaro.org>
2020-01-24build-sys: clean up flags included in the linker command linePaolo Bonzini
Some of the CFLAGS that are discovered during configure, for example compiler warnings, are being included on the linker command line because QEMU_CFLAGS is added to it. Other flags, such as the -m32, appear twice because they are included in both QEMU_CFLAGS and LDFLAGS. All this leads to confusion with respect to what goes in which Makefile variables (and we have plenty). So, introduce QEMU_LDFLAGS for flags discovered by configure, following the lead of QEMU_CFLAGS, and stop adding to it: 1) options that are already in CFLAGS, for example "-g" 2) duplicate options At the same time, options that _are_ needed by both compiler and linker must now be added to both QEMU_CFLAGS and QEMU_LDFLAGS, which is clearer. This is mostly -fsanitize options. For now, --extra-cflags has this behavior (but --extra-cxxflags does not). Meson will not include CFLAGS on the linker command line, do the same in our build system as well. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-09travis.yml: install homebrew python for OS XAlex Bennée
Our python3 requirements now outstrip those of the build. While we are at it we can move more of the special casing for Mac into the one build we have. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2020-01-09travis.yml: duplicate before_script for MacOSXAlex Bennée
Rather than keep the hack in the global code lets "Think Different" and have a special copy for MacOSX. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2020-01-09travis.yml: Detach build and test stepsWainer dos Santos Moschetta
Currently build and test commands are a single step in a Travis's `script` block. In order to see the output of the tests one needs to scroll down the log to find where the build messages ended and the limit is not clear. If they were in different steps then Travis would print the result build command, which can be easily grep'ed. So this change is made to detach those commands to ease the visualization of the output. Note that all steps on the `script` block is executed regardless if one previous has failed. To overcome it, let's save the return code of the build then check whether succeed or failed on the test step. Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20191230184327.2800-3-wainersm@redhat.com>
2020-01-09travis.yml: avocado: Print logs of non-pass tests onlyWainer dos Santos Moschetta
The acceptance tests build on Travis is configured to print the entire Avocado's job log in case any test fail. Usually one is interested on failed tests only though. So this change the Travis configuration in order to show the log of tests which status is different from 'PASS' and 'SKIP' only. Note that 'CANCEL'-ed tests will have the log printed too because it can help to debug some condition on CI environment which is not being fulfilled. Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20191230184327.2800-2-wainersm@redhat.com>
2019-12-20travis: Replace Python 3.4 build with 3.5Eduardo Habkost
We'll start requiring Python 3.5 to build QEMU. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-12-19travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entryThomas Huth
We test clang with the MAIN_SOFTMMU_TARGETS twice, once without sanitizers and once with sanitizers enabled. That's somewhat redundant since if compilation and tests succeeded with sanitizers enabled, it should also work fine without sanitizers. Thus remove the clang entry without sanitizers to speed up the CI testing a little bit. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20191119092147.4260-1-thuth@redhat.com>
2019-12-18ci: build out-of-treePaolo Bonzini
Most developers are using out-of-tree builds and it was discussed in the past to only allow those. To prepare for the transition, use out-of-tree builds in all continuous integration jobs. Based on a patch by Marc-André Lureau. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Li-Wen Hsu <lwhsu@freebsd.org> Message-Id: <1576074829-56711-1-git-send-email-pbonzini@redhat.com>
2019-12-18travis.yml: Enable builds on arm64, ppc64le and s390xThomas Huth
Travis recently added the possibility to test on these architectures, too, so let's enable them in our travis.yml file to extend our test coverage. Unfortunately, the libssh in this Ubuntu version (bionic) is in a pretty unusable Frankenstein state and libspice-server-dev is not available here, so we can not use the global list of packages to install, but have to provide individual package lists instead. Also, some of the iotests crash when using "dist: bionic" on arm64 and ppc64le, thus these two builders have to use "dist: xenial" until the problem is understood / fixed. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20191204154618.23560-8-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-12-18travis.yml: Run tcg tests with tciThomas Huth
So far we only have compile coverage for tci. But since commit 2f160e0f9797c7522bfd0d09218d0c9340a5137c ("tci: Add implementation for INDEX_op_ld16u_i64") has been included now, we can also run the "tcg" and "qtest" tests with tci, so let's enable them in Travis now. Since we don't gain much additional test coverage by compiling all targets, and TCI is broken e.g. with the Sparc targets, we also limit the target list to a reasonable subset now (which should still get us test coverage by tests/boot-serial-test for example). Tested-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20191204083133.6198-1-thuth@redhat.com> [AJB: just --enable-debug-tcg] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-12-09travis.yml: Drop libcap-devGreg Kurz
Commit 7e46261368d1 converted virtfs-proxy-helper to using libcap-ng. There aren't any users of libcap anymore. No need to install libcap-dev. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org>
2019-11-29.travis.yml: drop xcode9.4 from build matrixAlex Bennée
It's broken so it's no longer helping. The latest Xcode is covered by Cirrus. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191127132430.3681-1-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-20.travis.yml: drop 32 bit systems from MAIN_SOFTMMU_TARGETSAlex Bennée
The older clangs are still struggling to build and run everything withing the 50 minute timeout so lets lighten the load a bit more. We still have coverage for GCC and hopefully no obscure 32 bit guest only breakages slip through the cracks. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2019-11-12.travis.yml: don't run make check with multiple jobsAlex Bennée
Let's challenge the convention that doing more at a time helps. It certainly doesn't tell you unambiguously where in the test cycle you were before the test hangs and exceeds the job time limit. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-10-30Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging TCG Plugins initial implementation - use --enable-plugins @ configure - low impact introspection (-plugin empty.so to measure overhead) - plugins cannot alter guest state - example plugins included in source tree (tests/plugins) - -d plugin to enable plugin output in logs - check-tcg runs extra tests when plugins enabled - documentation in docs/devel/plugins.rst # gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits) travis.yml: enable linux-gcc-debug-tcg cache MAINTAINERS: add me for the TCG plugins code scripts/checkpatch.pl: don't complain about (foo, /* empty */) .travis.yml: add --enable-plugins tests include/exec: wrap cpu_ldst.h in CONFIG_TCG accel/stubs: reduce headers from tcg-stub tests/plugin: add hotpages to analyse memory access patterns tests/plugin: add instruction execution breakdown tests/plugin: add a hotblocks plugin tests/tcg: enable plugin testing tests/tcg: drop test-i386-fprem from TESTS when not SLOW tests/tcg: move "virtual" tests to EXTRA_TESTS tests/tcg: set QEMU_OPTS for all cris runs tests/tcg/Makefile.target: fix path to config-host.mak tests/plugin: add sample plugins linux-user: support -plugin option vl: support -plugin option plugin: add qemu_plugin_outs helper plugin: add qemu_plugin_insn_disas helper plugin: expand the plugin_init function to include an info block ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-03 08:44:35 +0000