aboutsummaryrefslogtreecommitdiff
path: root/.gitlab-ci.d
AgeCommit message (Collapse)Author
7 days.gitlab-ci.d: Raise timeout on cross-accel build jobs to 60mPeter Maydell
The current 30 minute timeout on the cross_accel_build_job template is a bit low: sometimes if the k8s runners are running slow the can hit it, for example this cross-arm64-xen-only job hit the 30 minute timeout while still not quite finished with the compile: https://gitlab.com/qemu-project/qemu/-/jobs/8401277985 This is partly a "runner performance can be unpredictable" issue: https://gitlab.com/qemu-project/qemu/-/jobs/8391726482 is the same job from just a day earlier and it finished in 16 minutes. But we already have build jobs that are higher timeouts than 30 minutes, so we have headroom to raise the timeout here to something we're less likely to hit on a slow runner. Bump the cross_accel_build_job timeout to 60 mins. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-ID: <20241118153226.1524542-1-peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-11-08tests: refresh package lists with latest libvirt-ciDaniel P. Berrangé
This updates the libvirt-ci submodule to pull in various fixes, the most notable reducing native package sets in cross builds. Some packages were mistakenly marked as native, rather than foreign, in libvirt-ci. Fixing this causes our dockerfiles to pick up the cross arch package instead of native one, thus improving our test coverage in a few areas. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-ID: <20241106123525.511491-1-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-11-05rust: silence unknown warnings for the sake of old compilersPaolo Bonzini
Occasionally, we may need to silence warnings and clippy lints that were only introduced in newer Rust compiler versions. However, this would fail when compiling with an older rustc: error: unknown lint: `non_local_definitions` --> rust/qemu-api/rust-qemu-api-tests.p/structured/offset_of.rs:79:17 So by default we need to block the unknown_lints warning. To avoid misspelled lints or other similar issues, re-enable it in the CI job that uses nightly rust. Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-11-04Revert "Remove the unused sh4eb target"Thomas Huth
This reverts commit 73ceb12960e686b763415f0880cc5171ccce01cf. The "r2d" machine can work in big endian mode, see: https://lore.kernel.org/qemu-devel/d6755445-1060-48a8-82b6-2f392c21f9b9@landley.net/ So the reasoning for removing sh4eb was wrong. Message-ID: <20241024082735.42324-2-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Rob Landley <rob@landley.net> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-11-04.gitlab-ci.d/cirrus: Remove the macos-15 jobThomas Huth
Cirrus-CI stopped providing the possibility to run macOS 15 jobs. Quoting https://cirrus-ci.org/guide/macOS/ : "Cirrus CI Cloud only allows ghcr.io/cirruslabs/macos-runner:sonoma image ..." If you still try to run a Sequoia image, it gets automatically "upgraded" to Sonoma instead. So the macos-15 job in the QEMU CI now does not make sense anymore, thus let's remove it. Message-ID: <20241021124722.139348-1-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-10-31ci: always invoke meson through pyvenvPaolo Bonzini
Do not assume that the distro-installed meson is compatible with the one in the virtual environment. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-10-31tests/lcitool: Update libvirt-ci and add libcbor dependencyDorjoy Chowdhury
libcbor dependecy is necessary for adding virtio-nsm and nitro-enclave machine support in the following commits. libvirt-ci has already been updated with the dependency upstream and this commit updates libvirt-ci submodule in QEMU to latest upstream. Also the libcbor dependency has been added to tests/lcitool/projects/qemu.yml. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com> Reviewed-by: Alexander Graf <graf@amazon.com> Link: https://lore.kernel.org/r/20241008211727.49088-2-dorjoychy111@gmail.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-10-30ci: enable rust in the Fedora system build jobDaniel P. Berrangé
We previously added a new job running Fedora with nightly rust toolchain. The standard rust toolchain distributed by Fedora is new enough, however, to let us enable a CI build with that too. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Link: https://lore.kernel.org/r/20241015133925.311587-3-berrange@redhat.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-10-30tests: add 'rust' and 'bindgen' to CI package listDaniel P. Berrangé
Although we're not enabling rust by default yet, we can still add rust and bindgen to the CI package list. This demonstrates that we're not accidentally triggering unexpected build behaviour merely from Rust being present. When we do dev work to enable rust by default, this will show we're building correctly on all platforms we target. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Link: https://lore.kernel.org/r/20241015133925.311587-2-berrange@redhat.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-10-25Merge tag 'pull-maintainer-oct-misc-241024-1' of ↵Peter Maydell
https://gitlab.com/stsquad/qemu into staging testing, gdbstub and plugin updates - update MAINTAINERS with pointers to foo/next - add NOFETCH to help test custom docker builds - update microblaze toolchain with atomic fixes - update tsan build and documentation - don't restrict build-environment by arch unless needed - add cross-modifying code test - add tracepoints for cpu_step_atomic fallbacks - fix defaults for loongarch cross build - make check-[dco|patch] a little more verbose - fix gdbstub bug preventing aarch64_be-linux-user starting - add basic test for aarch64_be - clean up some gdbstub test scripts - fix qemu_plugin_reset # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmcaDeQACgkQ+9DbCVqe # KkRTlQgAlFaP1Nxa8y6pRZSL0WY9J3Znf5e2GDnVN3nJbfx1wZg7oZ4/dWieDF/Y # /9jLfMi8nDJ51tzH24PSASbHQ1xnblhuUfhRMwqAFhSwsZUb0VzdeGdq+FIyXQ5w # Cy2Ubz7g81qP/x9JRCCUGFfXaM1LSizsY1lNioRsDd533WJLkvxWucmpSN3XhxHJ # rEa3xI/qAcUah4G3yww47L+DmlKnJQcsihShRBC6Am2tWqxbz+1kBUaVfaVVo1if # IPN+bBk4eI1EHdRRyWJSsq3nELzqW4FJ3+9V0ifsOFW2KGsnkhbl0qUxqDmW5aBb # P9flEdpTfSiCbqp+IKG9vxJKuf/BGw== # =5Wui # -----END PGP SIGNATURE----- # gpg: Signature made Thu 24 Oct 2024 10:05:40 BST # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * tag 'pull-maintainer-oct-misc-241024-1' of https://gitlab.com/stsquad/qemu: plugins: fix qemu_plugin_reset MAINTAINERS: mention my plugins/next tree testing: Enhance gdb probe script tests/tcg/aarch64: Use raw strings for regexes in test-mte.py tests/tcg: enable basic testing for aarch64_be-linux-user config/targets: update aarch64_be-linux-user gdb XML list MAINTAINERS: mention my gdbstub/next tree gitlab: make check-[dco|patch] a little more verbose dockerfiles: fix default targets for debian-loongarch-cross accel/tcg: add tracepoints for cpu_loop_exit_atomic tests/tcg/x86_64: Add cross-modifying code test scripts/ci: remove architecture checks for build-environment updates docs/devel: update tsan build documentation meson: hide tsan related warnings MAINTAINERS: mention my testing/next tree tests/docker: add NOFETCH env variable for testing tests/docker: Fix microblaze atomics Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-10-24gitlab: make check-[dco|patch] a little more verboseAlex Bennée
When git fails the rather terse backtrace only indicates it failed without some useful context. Add some to make the log a little more useful. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20241023113406.1284676-11-alex.bennee@linaro.org>
2024-10-22gitlab: enable afalg tests in fedora system testDaniel P. Berrangé
The AF_ALG crypto integration for Linux is not being tested in any CI scenario. It always requires an explicit configure time flag to be passed to turn it on. The Fedora system test is arbitrarily picked as the place to test it. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2024-10-14tests: update lcitool to fix freebsd py311-yaml renameDaniel P. Berrangé
This addresses the py311-yaml -> py311-pyyaml rename in FreeBSD. The change to the OpenSUSE dockerfile is something that will allow QEMU to access rust bindgen in future. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20241014130255.10119-1-berrange@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-10-11Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingPeter Maydell
* first commit for Rust support * add CI job using Fedora + Rust nightly * fix detection of ATOMIC128 on x86_64 * fix compilation with Sphinx 8.1.0 # -----BEGIN PGP SIGNATURE----- # # iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcJEKUUHHBib256aW5p # QHJlZGhhdC5jb20ACgkQv/vSX3jHroOSZQf+LlvZm9npHR6lZ9DEruhu/uf0c1gO # 9+dBJiKQ1OWopSQOqEgOsLL0J123Ls4V8O3tzZwIDuuRofCB2+wKswad6CHoydJx # 4p9rRXv6MLlnTqqGxemm/dPZqJ7+6L0poHoDKW+s7AgfVDshhj1RSbQfs8Ujh41F # f1sdi3DzopVWtK4CE+8/UeLy5Cxlixke9SKhYQrFHrdsANARP81gxQjczKApMc1z # v9qkrLtkM06VUyuvbPps7CHSHDpzx9mXcmkkPgLqLX9MfbCztzi44aVSaS9HYk5G # y54dSKdY7VJEuGhG916G+GMDJyow4nhT9Gk6tWtk63TQN5nExVsoZMOmdw== # =PFGL # -----END PGP SIGNATURE----- # gpg: Signature made Fri 11 Oct 2024 12:48:53 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: docs: use consistent markup for footnotes docs: avoid footnotes consisting of just URLs docs: fix invalid footnote syntax gitlab-ci: add Rust-enabled CI job dockerfiles: add a Dockerfile using a nightly Rust toolchain meson: ensure -mcx16 is passed when detecting ATOMIC128 meson: define qemu_isa_flags meson: fix machine option for x86_version rust: add PL011 device model rust: add utility procedural macro crate scripts/archive-source: find directory name for subprojects rust: add crate to expose bindings and interfaces meson.build: add HAVE_GLIB_WITH_ALIGNED_ALLOC flag .gitattributes: add Rust diff and merge attributes rust: add bindgen step as a meson dependency configure, meson: detect Rust toolchain build-sys: Add rust feature option Require meson version 1.5.0 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-10-11gitlab-ci: add Rust-enabled CI jobPaolo Bonzini
Add a job using --enable-rust, to ensure that the toolchain is installed correctly by the Dockerfile and that QEMU builds with Rust enabled on at least one platform. Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-10-07gitlab-ci/build-oss-fuzz: print FAILED marker in case the test failed and ↵Michael Tokarev
run all tests currently, if an oss-fuzz fails, the script does just `exit 1` without any additional output, and looking at the build log in the gitlab ci it is not clear what actually failed, without looking at build-oss-fuzz script and seeing this `exit 1`. Print easily recognizable error message about test failure, so it becomes obvious what exactly has failed. While at it, continue running other tests even in case of failure, and exit non-zero if at least one test failed. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-ID: <20241003121656.1173612-1-mjt@tls.msk.ru> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-10-07.gitlab-ci.d/cirrus: Add manual testing of macOS 15 (Sequoia)Philippe Mathieu-Daudé
Upgrade libvirt-ci so it covers macOS 15. Add a manual entry (QEMU_JOB_OPTIONAL: 1) to test on Sequoia release. Refresh the lci-tool generated files. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240917085058.1740-4-philmd@linaro.org> [thuth: Fix image names in cirrus.yml and hash for tests/lcitool/libvirt-ci] Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-10-07.gitlab-ci.d/cirrus: Drop support for macOS 13 (Ventura)Philippe Mathieu-Daudé
macOS 15 "Sequoia" was released on September 16, 2024 [1]. According to QEMU's support policy, we stop supporting the previous major release two years after the the new major release has been published. Time to remove support for macOS 13 (Ventura, released on October 2022, [2]). Promote the macOS 14 job, which was only built manually, to be run by default. [1] https://www.apple.com/newsroom/2024/09/macos-sequoia-is-available-today/ [2] https://www.apple.com/newsroom/2022/10/macos-ventura-is-now-available/ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240917085058.1740-3-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-10-02Remove the unused sh4eb targetThomas Huth
Since the "shix" machine has been removed, the "r2d" machine is the only machine that is still available for the sh4 and sh4eb targets. However, the "r2d" machine apparently does not work in big endian mode, see here: https://lore.kernel.org/qemu-devel/87a5fwjjew.wl-ysato@users.sourceforge.jp/ So there is no working machine left in the sh4eb-softmmu target, i.e. it is currently completely useless. Thus remove it from the configuration now. (Note: The linux-user binary is not removed since it might still be used to run sh4 binaries in big endian mode). Message-ID: <20240926105843.81385-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-09-25.gitlab-ci.d: Make separate collapsible log sections for build and testPeter Maydell
GitLab lets a CI job create its own collapsible log sections by emitting special escape codes, as documented here: https://docs.gitlab.com/ee/ci/yaml/script.html#expand-and-collapse-job-log-sections Use these to make "configure", "build" and "test" separate collapsible stages. As recommended by the GitLab docs, we use some shell which is sourced in the CI job to define functions to emit the magic lines that start and end sections, to hide the ugliness of the printf lines from the log. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240918125449.3125571-3-peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-09-25.gitlab-ci.d: Split build and test in cross build job templatesPeter Maydell
In the native_build_job_template we have separate steps in the script for the build and the test steps. This is helpful because then gitlab will give separate timestamps in the log view for each, and you can see how long it took to compile vs how long to test. In the templates in crossbuild-template.yml, however, we do both the build and test in a single 'make' invocation, and so we don't get the separate timing information. Split the build and test, in the same way we do in the native build template. This will also give us a place to separate out how parallel we want to do the build by default from how parallel we want to do the tests by default, which might be helpful in future. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240918125449.3125571-2-peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-09-17.gitlab-ci.d/crossbuilds.yml: Force 'make check' to -j2 for cross-i686-tciPeter Maydell
In commit 1374ed49e1453c300 we forced the cross-i686-tci job to -j1 to see if this helped with test timeouts. It seems to help with that but on the other hand we now sometimes run into the overall 60 minute job timeout. Try -j2 instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240916134913.2540486-1-peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-09-17gitlab: fix logic for changing docker tag on stable branchesDaniel P. Berrangé
This fixes: commit e28112d00703abd136e2411d23931f4f891c9244 Author: Daniel P. Berrangé <berrange@redhat.com> Date: Thu Jun 8 17:40:16 2023 +0100 gitlab: stable staging branches publish containers in a separate tag Due to a copy+paste mistake, that commit included "QEMU_JOB_SKIPPED" in the final rule that was meant to be a 'catch all' for staging branches. As a result stable branches are still splattering dockers from the primary development branch. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Tested-by: Michael Tokarev <mjt@tls.msk.ru> Message-ID: <20240906140958.84755-1-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-09-17.gitlab-ci.d/buildtest: Build most targets in the build-without-defaults jobThomas Huth
Now that all the qtests are able to deal with builds that use the "--without-default-devices" configuration switch, we can add all targets to the build-without-defaults job. But to avoid burning too much CI cycles in this job, exclude some targets where we already have similar test coverage by a related target. Message-ID: <20240905191434.694440-9-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-09-13system: Remove support for CRIS targetPhilippe Mathieu-Daudé
We are about to remove the CRIS target, so remove the sysemu part. This remove the CRIS 'none' machine. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Message-ID: <20240904143603.52934-13-philmd@linaro.org>
2024-09-13linux-user: Remove support for CRIS targetPhilippe Mathieu-Daudé
As per the deprecation notice in commit c7bbef4023: The CRIS architecture was pulled from Linux in 4.17 and the compiler is no longer packaged in any distro making it harder to run the `check-tcg` tests. Unless we can improve the testing situation there is a chance the code will bitrot without anyone noticing. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Message-ID: <20240904143603.52934-5-philmd@linaro.org>
2024-09-13buildsys: Remove CRIS cross containerPhilippe Mathieu-Daudé
We removed the cross compiled CRIS tests in the previous commit. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Message-ID: <20240904143603.52934-4-philmd@linaro.org>
2024-09-13.gitlab-ci.d/crossbuilds.yml: Force 'make check' single-threaded for ↵Peter Maydell
cross-i686-tci The cross-i686-tci CI job is persistently flaky with various tests hitting timeouts. One theory for why this is happening is that we're running too many tests in parallel and so sometimes a test gets starved of CPU and isn't able to complete within the timeout. (The environment this CI job runs in seems to cause us to default to a parallelism of 9 in the main CI.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20240912151003.2045031-1-peter.maydell@linaro.org
2024-09-11Merge tag 'pull-request-2024-09-11' of https://gitlab.com/thuth/qemu into ↵Peter Maydell
staging * Split --enable-sanitizers to --enable-{asan, ubsan} * Build MSYS2 job using multiple CPUs * Fix "make distclean" wrt contrib/plugins/ * Convert more Avocado tests to plain standalone functional tests * Fix bug that breaks "make check-functional" when tesseract is missing * Use builtin hashlib of Python in the functional tests * Update the FreeBSD CI jobs to 14.1 # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmbhY4YRHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbU/aw/9HXl9H8BUDn8lnoEmxuuQSk8F19n/l5pt # en3L8pMBt4dGFe/9KaGes2GFfid+cp2zlx+qQhA4HW35ntMJorF/qinOH/JGDtoM # 3O6RGZrQPn60zD9P2EbFVCrVYysVYCEu0U3Uglj6tf33bE0L7SJsQxqcbIciyIj5 # aq3Te0yMM2lqzCdMqNpWHGn3VMZRvbRaGBPDU4RLP8V2Bpz1iiRE+6HCH9Kg7HzS # OmleeXtvcyInG+54onjfTcn4/XA27pl1UU04KFv5PrRPB3M2FspHn7oOT2yyQ+ls # 79mqIcd8PvycCT+3ch9p8KhVtbVBgZGmeemALLvk5FxysaWnl4KtSqmQNdqSvvpV # waDDKlLaSnjEHDUse3bCJX0m4d7/vTBY5fOYxqZ4z5dl63csDtgPY4/VF4XR08sP # tR1mW+2qEH9eygsxuKcBjx/j7Etpy+jL9pX2ii1V3ElhjjYuEnpEiURa+TaqPjpZ # jmPtBEszzUdPbrD707tDkW3/ezT7VAnASQeYneJXB/JQG6K6Z//05iX6oCzCbRm3 # ceW/fem3UaeGYpzbMdoZToTuNlXEyS7NDcr39xJjH4LyRTPJAX4zeqUEdzces9g/ # u4Dw6rJ0Yhj4rscKxRvGl3/BH6CTI+8IAsbju2B/CnVLTqaABB0q/MDB90aB44xX # bAVsl4P03Uk= # =5TR0 # -----END PGP SIGNATURE----- # gpg: Signature made Wed 11 Sep 2024 10:31:50 BST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2024-09-11' of https://gitlab.com/thuth/qemu: (24 commits) Update FreeBSD CI jobs FreeBSD 14.1 tests/functional/qemu_test: Use Python hashlib instead of external programs tests/functional: Fix bad usage of has_cmd tests/functional: Convert the multiprocess avocado test into a standalone test tests/functional: Convert the or1k-sim Avocado test tests/functional: Convert the m68k MCF5208EVB Avocado test tests/functional: Convert the Alpha Clipper Avocado test tests/functional: Convert Aarch64 Raspi4 avocado tests tests/functional: Convert Aarch64 Raspi3 avocado tests tests/functional: Convert ARM Raspi2 avocado tests tests/functional: Convert mips32eb 4Kc Malta avocado tests tests/functional: Convert nanomips Malta avocado tests tests/functional: Convert mips32el Malta YAMON avocado test tests/functional: Convert mips64el 5KEc Malta avocado tests tests/functional: Convert mips64el I6400 Malta avocado tests tests/functional: Convert mips64el Fuloong2e avocado test (2/2) tests/functional: Convert the m68k Q800 Avocado test into a functional test tests/functional: Add the LinuxKernelTest for testing the Linux boot process MAINTAINERS: Remove myself from the Meson section MAINTAINERS: Remove myself as reviewer ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-09-11Update FreeBSD CI jobs FreeBSD 14.1Thomas Huth
The current FreeBSD CI jobs are failing installation since the "opencv" package is now missing there. Updating to 14.1 fixes the issue. Message-Id: <20240911090149.286257-1-thuth@redhat.com> Reviewed-by: Li-Wen Hsu <lwhsu@FreeBSD.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-09-11contrib/plugins/Makefile: Add a 'distclean' targetThomas Huth
Running "make distclean" in the build tree currently fails since this tries to run the "distclean" target in the contrib/plugins/ folder, too, but the Makefile there is missing this target. Thus add 'distclean' there to fix this issue. And to avoid regressions with "make distclean", add this command to one of the build jobs, too. Message-ID: <20240902154749.73876-1-thuth@redhat.com> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-09-11gitlab-ci: Build MSYS2 job using multiple CPUsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240819112141.13786-1-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-09-11meson: Move -fsanitize=undefined into normal configuratonRichard Henderson
With 8e466dd09246 and 23ef50ae2d0c, we disable function pointer sanitization in CI because the qemu code base does not support it. We must disable this for normal usage of --enable-ubsan as well, so move it there. Append options rather than prepend, since all of this requires proper ordering of options. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240813095216.306555-3-richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-09-11meson: Split --enable-sanitizers to --enable-{asan, ubsan}Richard Henderson
We do not always want both address and undefined behavior sanitizers running at the same time. For the gitlab custom-runners, drop to only --enable-ubsan. These jobs are not run by default, but as will be obvious in the next patch, we don't run ASan on x86 either, and it seems wrong to hold aarch64 and s390x to a different standard. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240813095216.306555-2-richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-09-10tests/docker: remove debian-armel-crossAlex Bennée
As debian-11 transitions to LTS we are starting to have problems building the image. While we could update to a later Debian building a 32 bit QEMU without modern floating point is niche host amongst the few remaining 32 bit hosts we regularly build for. For now we still have armhf-debian-cross-container which is currently built from the more recent debian-12. Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240910173900.4154726-2-alex.bennee@linaro.org>
2024-09-09ci: migration: Don't run python tests in the compat jobFabiano Rosas
The vmstate-checker-script test has a bug that makes it flaky. It was also committed by mistake and will be removed. Since the migration-compat job takes the tests from the build-previous job instead of the current HEAD, neither a fix or a removal of the test will take effect for this release. Disable the faulty/undesirable test by taking advantage that it only runs if the PYTHON environment variable is set. This also disables the analyze-migration-script test, but this is fine because that test doesn't have migration compatibility implications. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Thomas Huth <thuth@redhat.com> Link: https://lore.kernel.org/r/20240905185445.8179-1-farosas@suse.de [peterx: Added a TODO to remove the line after 9.2 release, per thuth] Signed-off-by: Peter Xu <peterx@redhat.com>
2024-09-04gitlab-ci: Add "check-functional" to the build testsThomas Huth
Now that we converted many tests from the "check-avocado" test suite to the "check-functional" test suite, we should make sure that these also get tested in the CI. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240830133841.142644-41-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-08-26.gitlab-ci.d/windows.yml: Disable the qtests in the MSYS2 jobThomas Huth
The qtests are broken since a while in the MSYS2 job in the gitlab-CI, likely due to some changes in the MSYS2 environment. So far nobody has neither a clue what's going wrong here, nor an idea how to fix this (in fact most QEMU developers even don't have a Windows environment available for properly analyzing this problem), so we should disable the qtests here for the time being to get at least test coverage again for the remaining tests that are run here. Since we already get compile-test coverage for the system emulation in the cross-win64-system job, and since the MSYS2 job is one of the longest running jobs in our CI (it takes more than 1 hour to complete), let's seize the opportunity and also cut the run time by disabling the system emulation completely here, including the libraries that are only useful for system emulation. In case somebody ever figures out the failure of the qtests on MSYS2, we can revert this patch to get everything back. Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240820170142.55324-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-08-26gitlab-ci: Replace build_script -> step_script in Cirrus jobsPhilippe Mathieu-Daudé
Long due upgrade, see [1]: In GitLab Runner 13.2 a translation for step_script to build_script was added to the custom executor. In 14.0 the build_script stage will be replaced with step_script. We are using GitLab 17 [2]! This removes the following warning: WARNING: Starting with version 17.0 the 'build_script' stage will be replaced with 'step_script': https://gitlab.com/groups/gitlab-org/-/epics/6112 [1] https://about.gitlab.com/releases/2021/05/22/gitlab-13-12-released/#remove-translation-from-stepscript-to-buildscript-in-custom-executor [2] https://about.gitlab.com/releases/2024/05/16/gitlab-17-0-released/ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240816213203.18350-1-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-08-16ci: refresh package lists with lcitoolDaniel P. Berrangé
Refresh with the newly added gtk-vnc package Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-ID: <20240718094159.902024-3-berrange@redhat.com> [thuth: fixed conflicts in .gitlab-ci.d/cirrus/*.vars] Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-07-30gitlab: display /packages.txt in build jobsDaniel P. Berrangé
The lcitool created containers save the full distro package list details into /packages.txt. The idea is that build jobs will 'cat' this file, so that the build log has a record of what packages were used. This is important info, because when it comes to debug failures, the original container is often lost. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20240724095505.33544-3-berrange@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240729144414.830369-3-alex.bennee@linaro.org>
2024-07-26gitlab-ci: Use -fno-sanitize=function in the clang-user jobRichard Henderson
With -fsanitize=undefined, which implies -fsanitize=function, clang will add a "type signature" before functions. It accesses funcptr-8 and funcptr-4 to do so. The generated TCG prologue is directly on a page boundary, so these accesses segfault. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240723232543.18093-1-richard.henderson@linaro.org>
2024-07-22testing: bump to latest libvirt-ciAlex Bennée
This brings in the latest python mappings for the BSD updates. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240718094523.1198645-2-alex.bennee@linaro.org>
2024-07-05gitlab: don't bother with KVM for TCI buildsAlex Bennée
In fact any other accelerator would be pointless as the point is to exercise the TCI accelerator anyway. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240705084047.857176-21-alex.bennee@linaro.org>
2024-07-05testing: restore some testing for i686Alex Bennée
The commit 4f9a8315e6 (gitlab-ci.d/crossbuilds: Drop the i386 system emulation job) was a little too aggressive dropping testing for 32 bit system builds. Partially revert but using the debian-i686 cross build images this time as fedora has deprecated the 32 bit stuff. As the SEV breakage gets in the way and its TCG issues we want to catch I've added --disable-kvm to the build. Reported-by: Richard Henderson <richard.henderson@linaro.org> Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240705084047.857176-3-alex.bennee@linaro.org>
2024-07-03meson: Drop the .fa library suffixPaolo Bonzini
The non-standard .fa library suffix breaks the link source de-duplication done by Meson so drop it. The lack of link source de-duplication causes AddressSanitizer to complain ODR violations, and makes GNU ld abort when combined with clang's LTO. Fortunately, the non-standard suffix is not necessary anymore for two reasons. First, the non-standard suffix was necessary for fork-fuzzing. Meson wraps all standard-suffixed libraries with --start-group and --end-group. This made a fork-fuzz.ld linker script wrapped as well and broke builds. Commit d2e6f9272d33 ("fuzz: remove fork-fuzzing scaffolding") dropped fork-fuzzing so we can now restore the standard suffix. Second, the libraries are not even built anymore, because it is possible to just use the object files directly via extract_all_objects(). The occurences of the suffix were detected and removed by performing a tree-wide search with 'fa' and .fa (note the quotes and dot). Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-ID: <20240524-xkb-v4-4-2de564e5c859@daynix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-06-06.gitlab-ci.d/buildtest.yml: Use -fno-sanitize=function in the clang-system jobThomas Huth
The latest version of Clang (version 18 from Fedora 40) now reports bad function pointer casts as undefined behavior. Unfortunately, we are still doing this in quite a lot of places in the QEMU code and some of them are not easy to fix. So for the time being, temporarily switch this off in the failing clang-system job until all spots in the QEMU sources have been tackled. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20240601070543.37786-4-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240603175328.3823123-9-alex.bennee@linaro.org>
2024-06-06docs/ci: clean-up references for consistencyAlex Bennée
Document we have split up build-environment by distro and update the references that exist in the code base to be correct. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240603175328.3823123-7-alex.bennee@linaro.org>
2024-06-06ci: remove centos-steam-8 customer runnerAlex Bennée
This broke since eef0bae3a7 (migration: Remove block migration) but even after that was addressed it still fails to complete. As it will shortly be EOL lets to remove the runner definition and the related ansible setup bits. We still have centos9 docker images build and test. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240603175328.3823123-2-alex.bennee@linaro.org>
2024-05-14gitlab: use 'setarch -R' to workaround tsan bugDaniel P. Berrangé
The TSAN job started failing when gitlab rolled out their latest release. The root cause is a change in the Google COS version used on shared runners. This brings a kernel running with vm.mmap_rnd_bits = 31 which is incompatible with TSAN in LLVM < 18, which only supports upto '28'. LLVM 18 can support upto '30', and failing that will re-exec itself to turn off VA randomization. Our LLVM is too old for now, but we can run with 'setarch -R make ..' to turn off VA randomization ourselves. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240513111551.488088-4-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-25 07:09:44 +0000