aboutsummaryrefslogtreecommitdiff
path: root/.gitignore
AgeCommit message (Collapse)Author
2013-12-02.gitignore: Ignore config.statusFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-10-26.gitignore: ignore qmp-commands.txtFam Zheng
This file is moved out from QMP/ to BUILD dir, change the ignore file too. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-09qemu-ga: Add configure options to specify path to Windows/VSS SDKTomoki Sekiyama
To enable VSS support in qemu-ga for Windows, header files included in VSS SDK are required. The VSS support is enabled by the configure option like below: ./configure --with-vss-sdk="/path/to/VSS SDK" If the path is omitted, it tries to search the headers from default paths and VSS support is enabled only if the SDK is found. VSS support is disabled if --without-vss-sdk or --with-vss-sdk=no is specified. VSS SDK is available from: http://www.microsoft.com/en-us/download/details.aspx?id=23490 To cross-compile using mingw, you need to setup the SDK on Windows environments to extract headers. You can also extract the SDK headers on POSIX environments using scripts/extract-vss-headers and msitools. In addition, --with-win-sdk="/path/to/Windows SDK" option is also added to specify path to Windows SDK, which may be used for native-compile of .tlb file of qemu-ga VSS provider. However, this is usually unnecessary because pre-compiled .tlb file is included. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-08-20OptsVisitor: introduce unit tests, with test cases for range flatteningLaszlo Ersek
According to commit 4f193e34 ("tests: Use qapi-schema-test.json as schema parser test") the "tests/qapi-schema/qapi-schema-test.out" file must be updated as well. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-20add "test-int128" and "test-bitops" to .gitignoreLaszlo Ersek
"test-int128" was probably missed in commit 6046c620 ("int128: optimize and add test cases"). "test-bitops" was probably missed in commit 3464700f ("tests: Add test-bitops.c with some sextract tests"). Signed-off-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-06-11gitignore: unignore *.patchMichael Tokarev
This partially reverts: commit 082369e62c5bbaba89f173c2b803bc24115bb111 Author: liguang <lig.fnst@cn.fujitsu.com> Date: Fri Mar 22 16:44:13 2013 +0800 gitignore: ignore more files I'm not sure how this went in. The thing is that ignoring *.patch, in my opinion, is just wrong. Especially for downstreams who apply patches for real. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-04-26S390: ccw firmware: Add MakefileAlexander Graf
This patch adds a makefile, so we can build our ccw firmware. Also add the resulting binaries to .gitignore, so that nobody is annoyed they might be in the tree. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-28.gitignore: rename trace/generated-tracers.dtraceStefan Hajnoczi
For a while the file was called trace/generated-tracers-dtrace.dtrace but today it's called trace/generated-tracers.dtrace. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-28.gitignore: add trace/generated-events.[ch]Stefan Hajnoczi
Don't display autogenerated files in git-status(1). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-22gitignore: ignore more filesliguang
ignore *.patch, *.gcda, *.gcno Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-21.gitignore: Ignore optionrom/*.asmCole Robinson
Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-15Add libcacard/trace/generated-tracers.c to .gitignoreAlex Rozenman
Signed-off-by: Alex Rozenman <Alex_Rozenman@mentor.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-08qemu-ga: sample fsfreeze hooksTomoki Sekiyama
Adds sample hook scripts for --fsfreeze-hook option of qemu-ga. - fsfreeze-hook : execute scripts in fsfreeze-hook.d/ - fsfreeze-hook.d/mysql-flush.sh.sample : quiesce MySQL before snapshot Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2012-12-23build: Use separate makefile for "trace/"Lluís Vilanova
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> -- Changes in v2: * Do not depend on "qemu-timer-common.o". * Use "$(obj)" in rules to refer to the build sub-directory. * Remove dependencies against "$(GENERATED_HEADERS)". Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19Merge remote-tracking branch 'bonzini/header-dirs' into stagingAnthony Liguori
* bonzini/header-dirs: (45 commits) janitor: move remaining public headers to include/ hw: move executable format header files to hw/ fpu: move public header file to include/fpu softmmu: move remaining include files to include/ subdirectories softmmu: move include files to include/sysemu/ misc: move include files to include/qemu/ qom: move include files to include/qom/ migration: move include files to include/migration/ monitor: move include files to include/monitor/ exec: move include files to include/exec/ block: move include files to include/block/ qapi: move include files to include/qobject/ janitor: add guards to headers qapi: make struct Visitor opaque qapi: remove qapi/qapi-types-core.h qapi: move inclusions of qemu-common.h from headers to .c files ui: move files to ui/ and include/ui/ qemu-ga: move qemu-ga files to qga/ net: reorganize headers net: move net.c to net/ ... Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19build: kill libdis, move disassemblers to disas/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-18gitignore: Add virtfs-proxy-helperCole Robinson
Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-10-05Remove libhwStefan Weil
The entries for libhw* are no longer needed in .gitignore. There is also no longer a difference between common-obj-y and hw-obj-y, so one of those two macros is sufficient. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-04Make target_phys_addr_t 64 bits unconditionallyAvi Kivity
The hassle and compile time overhead of maintaining both 32-bit and 64-bit capable source isn't worth the tiny performance advantage which is seen on a minority of configurations. Switch to compiling libhw only once, with target_phys_addr_t unconditionally typedefed to uint64_t. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-07.gitignore updateEduardo Habkost
Makes sure the following files are ignored: libcacard/.libs/ libcacard/libcacard.la libcacard/libcacard.pc libcacard/libcacard/ libcacard/osdep.lo libcacard/oslib-posix.lo libcacard/qemu-thread-posix.lo libcacard/qemu-timer-common.lo libcacard/trace.lo libcacard/trace/ tests/test-visitor-serialization vscclient Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-19.gitignore: add qemu-bridge-helper and option rom build productsDavid Gibson
This adds a few previously missing generated files to .gitignore: the qemu-bridge-helper binary, and more generated versions of the linuxboot, multiboot and kvmvapic roms from pc-bios/optionrom. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-01Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori
* qemu-kvm/uq/master: pc-bios: update kvmvapic.bin kvmvapic: Use optionrom helpers optionsrom: Reserve space for checksum kvmvapic: Simplify mp/up_set_tpr kvmvapic: Introduce TPR access optimization for Windows guests kvmvapic: Add option ROM target-i386: Add infrastructure for reporting TPR MMIO accesses Allow to use pause_all_vcpus from VCPU context Process pending work while waiting for initial kick-off in TCG mode Remove useless casts from cpu iterators kvm: Set cpu_single_env only once kvm: Synchronize cpu state in kvm_arch_stop_on_emulation_error()
2012-02-21qapi: add tests for string-based visitorsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-02-18kvmvapic: Add option ROMJan Kiszka
This imports and builds the original VAPIC option ROM of qemu-kvm. Its interaction with QEMU is described in the commit that introduces the corresponding device model. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-21Update gitignore fileDavid Gibson
This patch adds several auto-generated files to .gitignore which were previously missing. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-01Add qapi related generated files to .gitignoreDavid Gibson
.gitignore already lists the qapi-generated subdirectory which includes a number of files generated during build. However, there are some additional files generated by the qapi build which go in the top level directory. This patch adds them to .gitignore, removing the irritating noise from diffs and the like. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-30Add linux-headers/asm to .gitignoreDavid Gibson
linux-headers/asm is a symlink generated during configure. It should not, therefore be committed to git, nor show up in git diffs and the like. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-02coroutine: add test-coroutine automated testsStefan Hajnoczi
To run automated tests for coroutines: make test-coroutine ./test-coroutine On success the program terminates with exit status 0. On failure an error message is written to stderr and the program exits with exit status 1. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-07-23.gitignore: ignore qemu-ga and qapi-generatedAlexandre Raymond
Add a new binary and generation directory to the gitignore file Signed-off-by: Alexandre Raymond <cerbere@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-04-16Makefile: Clean up after "make pdf"Brad Hards
Signed-off-by: Brad Hards <bradh@frogmouth.net> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-02-24Add TAGS and *~ to .gitignoreDavid Gibson
Add the etags output generated by "make TAGS" and editor backup files to .gitignore. This patch has previously appeared in my series of patches to add pSeries emulation support. However, it obviously has no real connection to that, and can be applied seperately. Please apply. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-11.gitignore: ignore vi swap files and ctags filesDmitry Eremin-Solenikov
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2010-11-21Add a DTrace tracing backend targetted for SystemTAP compatabilityDaniel P. Berrange
This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21Revert "Add a DTrace tracing backend targetted for SystemTAP compatability"Anthony Liguori
This reverts commit 4addb1127f6327c7ebcbd150a6b589e7677adc92.
2010-11-16Add a DTrace tracing backend targetted for SystemTAP compatabilityDaniel P. Berrange
This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-10-09.gitignore: Ignore *-timestampStefan Hajnoczi
Timestamp files were recently added to reduce make churn on source files that use tracing. The timestamp files should never be committed and should not be visible in git status. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-09trace: Add simple built-in tracing backendStefan Hajnoczi
This patch adds a simple tracer which produces binary trace files. To try out the simple backend: $ ./configure --trace-backend=simple $ make After running QEMU you can pretty-print the trace: $ ./simpletrace.py trace-events trace.log The output of simpletrace.py looks like this: qemu_realloc 0.699 ptr=0x24363f0 size=0x3 newptr=0x24363f0 qemu_free 0.768 ptr=0x24363f0 ^ ^---- timestamp delta (us) |____ trace event name Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> trace: Make trace record fields 64-bit Explicitly use 64-bit fields in trace records so that timestamps and magic numbers work for 32-bit host builds. Includes fixes from Prerna Saxena <prerna@linux.vnet.ibm.com>. Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-09-09trace: Add trace-events file for declaring trace eventsStefan Hajnoczi
This patch introduces the trace-events file where trace events can be declared like so: qemu_malloc(size_t size) "size %zu" qemu_free(void *ptr) "ptr %p" These trace event declarations are processed by a new tool called tracetool to generate code for the trace events. Trace event declarations are independent of the backend tracing system (LTTng User Space Tracing, ftrace markers, DTrace). The default "nop" backend generates empty trace event functions. Therefore trace events are disabled by default. The trace-events file serves two purposes: 1. Adding trace events is easy. It is not necessary to understand the details of a backend tracing system. The trace-events file is a single location where trace events can be declared without code duplication. 2. QEMU is not tightly coupled to one particular backend tracing system. In order to support tracing across QEMU host platforms and to anticipate new backend tracing systems that are currently maturing, it is important to be flexible and not tied to one system. This commit includes fixes from Prerna Saxena <prerna@linux.vnet.ibm.com> and Blue Swirl <blauwirbel@gmail.com>. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-07-25add cscope.* to .gitignoreJun Koi
we have "make cscope", therefore that makes sense to have cscope.* in .gitignore. Signed-off-by: Jun Koi <junkoi2004@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-01Add QMP/qmp-commands.txt to .gitignoreHidetoshi Seto
QMP/qmp-commands.txt is a generated file. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-27.gitignore: Ignore libdis*, qemu-options.defStefan Weil
libdis, libdis-user and qemu-options.def are generated directories / files and should be ignored by git. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-20Remove i386 from .gitignoreAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-10Documentation: Add build support for documentation in pdf formatStefan Weil
Makefile already supported dvi, html and info formats, but pdf was missing. pdf is especially convenient for printing and for documentation reviews. I hope it will help to improve qemu's documentation. Make now supports the new target 'pdf' which will create qemu-doc.pdf and qemu-tech.pdf. It is also possible to build both files individually. texi2pdf and texi2dvi are rather noisy, so normally some less important warnings are suppressed. When make is called with V=1 (verbose mode), warnings are not suppressed. The patch also sorts the documentation targets alphabetically and wraps a line which was too long. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-23linuxboot.bin is a generated fileJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-08Add new config-devices.mak for each targetJuan Quintela
We generate config-devices.h from there automatically. We need to do it in main Makefile, because we are going to need a main Makefile for them. Patchworks-ID: 35196 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Rename config.{h, mak} config-target.{h, mak}Juan Quintela
Add config.h file that includes config-target.h and config-host.h Patchworks-ID: 35193 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-02libuser is a generated directoryJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-27multiboot.raw is a generated fileJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27multiboot.bin is a generated fileJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22dot gitignore: add qemu-monitor.texiIsaku Yamahata
add qemu-monitor.texi to .gitignore. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-18 06:05:33 +0000