diff options
Diffstat (limited to 'trace-events')
| -rw-r--r-- | trace-events | 51 |
1 files changed, 0 insertions, 51 deletions
diff --git a/trace-events b/trace-events index 784da57a5f..c32c9ba6be 100644 --- a/trace-events +++ b/trace-events @@ -46,26 +46,6 @@ virtio_balloon_to_target(uint64_t target, uint32_t num_pages) "balloon target: % nvram_read(uint32_t addr, uint32_t ret) "read addr %d: 0x%02x" nvram_write(uint32_t addr, uint32_t old, uint32_t val) "write addr %d: 0x%02x -> 0x%02x" -# hw/misc/eccmemctl.c -ecc_mem_writel_mer(uint32_t val) "Write memory enable %08x" -ecc_mem_writel_mdr(uint32_t val) "Write memory delay %08x" -ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status %08x" -ecc_mem_writel_vcr(uint32_t val) "Write slot configuration %08x" -ecc_mem_writel_dr(uint32_t val) "Write diagnostic %08x" -ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 %08x" -ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 %08x" -ecc_mem_readl_mer(uint32_t ret) "Read memory enable %08x" -ecc_mem_readl_mdr(uint32_t ret) "Read memory delay %08x" -ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status %08x" -ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration %08x" -ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 %08x" -ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 %08x" -ecc_mem_readl_dr(uint32_t ret) "Read diagnostic %08x" -ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 %08x" -ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 %08x" -ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = %02x" -ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= %02x" - # hw/nvram/fw_cfg.c fw_cfg_select(void *s, uint16_t key, int ret) "%p key %d = %d" fw_cfg_read(void *s, uint64_t ret) "%p = %"PRIx64 @@ -96,27 +76,6 @@ ps2_mouse_reset(void *opaque) "%p" ps2_kbd_init(void *s) "%p" ps2_mouse_init(void *s) "%p" -# hw/misc/slavio_misc.c -slavio_misc_update_irq_raise(void) "Raise IRQ" -slavio_misc_update_irq_lower(void) "Lower IRQ" -slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, config: %d" -slavio_cfg_mem_writeb(uint32_t val) "Write config %02x" -slavio_cfg_mem_readb(uint32_t ret) "Read config %02x" -slavio_diag_mem_writeb(uint32_t val) "Write diag %02x" -slavio_diag_mem_readb(uint32_t ret) "Read diag %02x" -slavio_mdm_mem_writeb(uint32_t val) "Write modem control %02x" -slavio_mdm_mem_readb(uint32_t ret) "Read modem control %02x" -slavio_aux1_mem_writeb(uint32_t val) "Write aux1 %02x" -slavio_aux1_mem_readb(uint32_t ret) "Read aux1 %02x" -slavio_aux2_mem_writeb(uint32_t val) "Write aux2 %02x" -slavio_aux2_mem_readb(uint32_t ret) "Read aux2 %02x" -apc_mem_writeb(uint32_t val) "Write power management %02x" -apc_mem_readb(uint32_t ret) "Read power management %02x" -slavio_sysctrl_mem_writel(uint32_t val) "Write system control %08x" -slavio_sysctrl_mem_readl(uint32_t ret) "Read system control %08x" -slavio_led_mem_writew(uint32_t val) "Write diagnostic LED %04x" -slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED %04x" - # hw/timer/slavio_timer.c slavio_timer_get_out(uint64_t limit, uint32_t counthigh, uint32_t count) "limit %"PRIx64" count %x%08x" slavio_timer_irq(uint32_t counthigh, uint32_t count) "callback: count %x%08x" @@ -589,20 +548,10 @@ megasas_mmio_invalid_readl(unsigned long addr) "addr 0x%lx" megasas_mmio_writel(const char *reg, uint32_t val) "reg %s: 0x%x" megasas_mmio_invalid_writel(uint32_t addr, uint32_t val) "addr 0x%x: 0x%x" -# hw/misc/milkymist-hpdmc.c -milkymist_hpdmc_memory_read(uint32_t addr, uint32_t value) "addr=%08x value=%08x" -milkymist_hpdmc_memory_write(uint32_t addr, uint32_t value) "addr=%08x value=%08x" - # hw/sd/milkymist-memcard.c milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" -# hw/misc/milkymist-pfpu.c -milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" -milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" -milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a %08x b %08x dma_ptr %08x" -milkymist_pfpu_pulse_irq(void) "Pulse IRQ" - # hw/input/milkymist-softusb.c milkymist_softusb_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" milkymist_softusb_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" |