diff options
Diffstat (limited to 'tests')
| -rw-r--r-- | tests/m25p80-test.c | 102 |
1 files changed, 102 insertions, 0 deletions
diff --git a/tests/m25p80-test.c b/tests/m25p80-test.c index 8dd550deb9..244aa33dd9 100644 --- a/tests/m25p80-test.c +++ b/tests/m25p80-test.c @@ -36,6 +36,9 @@ #define CRTL_EXTENDED0 0 /* 32 bit addressing for SPI */ #define R_CTRL0 0x10 #define CTRL_CE_STOP_ACTIVE (1 << 2) +#define CTRL_READMODE 0x0 +#define CTRL_FREADMODE 0x1 +#define CTRL_WRITEMODE 0x2 #define CTRL_USERMODE 0x3 #define ASPEED_FMC_BASE 0x1E620000 @@ -86,6 +89,22 @@ static void spi_conf_remove(uint32_t value) writel(ASPEED_FMC_BASE + R_CONF, conf); } +static void spi_ce_ctrl(uint32_t value) +{ + uint32_t conf = readl(ASPEED_FMC_BASE + R_CE_CTRL); + + conf |= value; + writel(ASPEED_FMC_BASE + R_CE_CTRL, conf); +} + +static void spi_ctrl_setmode(uint8_t mode, uint8_t cmd) +{ + uint32_t ctrl = readl(ASPEED_FMC_BASE + R_CTRL0); + ctrl &= ~(CTRL_USERMODE | 0xff << 16); + ctrl |= mode | (cmd << 16); + writel(ASPEED_FMC_BASE + R_CTRL0, ctrl); +} + static void spi_ctrl_start_user(void) { uint32_t ctrl = readl(ASPEED_FMC_BASE + R_CTRL0); @@ -152,6 +171,18 @@ static void read_page(uint32_t addr, uint32_t *page) spi_ctrl_stop_user(); } +static void read_page_mem(uint32_t addr, uint32_t *page) +{ + int i; + + /* move out USER mode to use direct reads from the AHB bus */ + spi_ctrl_setmode(CTRL_READMODE, READ); + + for (i = 0; i < PAGE_SIZE / 4; i++) { + page[i] = make_be32(readl(ASPEED_FLASH_BASE + addr + i * 4)); + } +} + static void test_erase_sector(void) { uint32_t some_page_addr = 0x600 * PAGE_SIZE; @@ -248,6 +279,75 @@ static void test_write_page(void) flash_reset(); } +static void test_read_page_mem(void) +{ + uint32_t my_page_addr = 0x14000 * PAGE_SIZE; /* beyond 16MB */ + uint32_t some_page_addr = 0x15000 * PAGE_SIZE; + uint32_t page[PAGE_SIZE / 4]; + int i; + + /* Enable 4BYTE mode for controller. This is should be strapped by + * HW for CE0 anyhow. + */ + spi_ce_ctrl(1 << CRTL_EXTENDED0); + + /* Enable 4BYTE mode for flash. */ + spi_conf(CONF_ENABLE_W0); + spi_ctrl_start_user(); + writeb(ASPEED_FLASH_BASE, EN_4BYTE_ADDR); + spi_ctrl_stop_user(); + spi_conf_remove(CONF_ENABLE_W0); + + /* Check what was written */ + read_page_mem(my_page_addr, page); + for (i = 0; i < PAGE_SIZE / 4; i++) { + g_assert_cmphex(page[i], ==, my_page_addr + i * 4); + } + + /* Check some other page. It should be full of 0xff */ + read_page_mem(some_page_addr, page); + for (i = 0; i < PAGE_SIZE / 4; i++) { + g_assert_cmphex(page[i], ==, 0xffffffff); + } + + flash_reset(); +} + +static void test_write_page_mem(void) +{ + uint32_t my_page_addr = 0x15000 * PAGE_SIZE; + uint32_t page[PAGE_SIZE / 4]; + int i; + + /* Enable 4BYTE mode for controller. This is should be strapped by + * HW for CE0 anyhow. + */ + spi_ce_ctrl(1 << CRTL_EXTENDED0); + + /* Enable 4BYTE mode for flash. */ + spi_conf(CONF_ENABLE_W0); + spi_ctrl_start_user(); + writeb(ASPEED_FLASH_BASE, EN_4BYTE_ADDR); + writeb(ASPEED_FLASH_BASE, WREN); + spi_ctrl_stop_user(); + + /* move out USER mode to use direct writes to the AHB bus */ + spi_ctrl_setmode(CTRL_WRITEMODE, PP); + + for (i = 0; i < PAGE_SIZE / 4; i++) { + writel(ASPEED_FLASH_BASE + my_page_addr + i * 4, + make_be32(my_page_addr + i * 4)); + } + + /* Check what was written */ + read_page_mem(my_page_addr, page); + for (i = 0; i < PAGE_SIZE / 4; i++) { + g_assert_cmphex(page[i], ==, my_page_addr + i * 4); + } + + flash_reset(); +} + static char tmp_path[] = "/tmp/qtest.m25p80.XXXXXX"; int main(int argc, char **argv) @@ -273,6 +373,8 @@ int main(int argc, char **argv) qtest_add_func("/m25p80/erase_sector", test_erase_sector); qtest_add_func("/m25p80/erase_all", test_erase_all); qtest_add_func("/m25p80/write_page", test_write_page); + qtest_add_func("/m25p80/read_page_mem", test_read_page_mem); + qtest_add_func("/m25p80/write_page_mem", test_write_page_mem); ret = g_test_run(); |