aboutsummaryrefslogtreecommitdiff
path: root/target-mips/kvm.c
diff options
context:
space:
mode:
Diffstat (limited to 'target-mips/kvm.c')
-rw-r--r--target-mips/kvm.c129
1 files changed, 109 insertions, 20 deletions
diff --git a/target-mips/kvm.c b/target-mips/kvm.c
index a1f5b6012e..950bc05b7c 100644
--- a/target-mips/kvm.c
+++ b/target-mips/kvm.c
@@ -31,6 +31,7 @@
do { if (DEBUG_KVM) { fprintf(stderr, fmt, ## __VA_ARGS__); } } while (0)
static int kvm_mips_fpu_cap;
+static int kvm_mips_msa_cap;
const KVMCapabilityInfo kvm_arch_required_capabilities[] = {
KVM_CAP_LAST_INFO
@@ -49,6 +50,7 @@ int kvm_arch_init(MachineState *ms, KVMState *s)
kvm_set_sigmask_len(s, 16);
kvm_mips_fpu_cap = kvm_check_extension(s, KVM_CAP_MIPS_FPU);
+ kvm_mips_msa_cap = kvm_check_extension(s, KVM_CAP_MIPS_MSA);
DPRINTF("%s\n", __func__);
return 0;
@@ -71,6 +73,15 @@ int kvm_arch_init_vcpu(CPUState *cs)
}
}
+ if (kvm_mips_msa_cap && env->CP0_Config3 & (1 << CP0C3_MSAP)) {
+ ret = kvm_vcpu_enable_cap(cs, KVM_CAP_MIPS_MSA, 0, 0);
+ if (ret < 0) {
+ /* mark unsupported so it gets disabled on reset */
+ kvm_mips_msa_cap = 0;
+ ret = 0;
+ }
+ }
+
DPRINTF("%s\n", __func__);
return ret;
}
@@ -83,6 +94,10 @@ void kvm_mips_reset_vcpu(MIPSCPU *cpu)
fprintf(stderr, "Warning: KVM does not support FPU, disabling\n");
env->CP0_Config1 &= ~(1 << CP0C1_FP);
}
+ if (!kvm_mips_msa_cap && env->CP0_Config3 & (1 << CP0C3_MSAP)) {
+ fprintf(stderr, "Warning: KVM does not support MSA, disabling\n");
+ env->CP0_Config3 &= ~(1 << CP0C3_MSAP);
+ }
DPRINTF("%s\n", __func__);
}
@@ -373,9 +388,11 @@ static inline int kvm_mips_get_one_ureg64(CPUState *cs, uint64_t reg_id,
#define KVM_REG_MIPS_CP0_CONFIG1_MASK ((1U << CP0C1_M) | \
(1U << CP0C1_FP))
#define KVM_REG_MIPS_CP0_CONFIG2_MASK (1U << CP0C2_M)
-#define KVM_REG_MIPS_CP0_CONFIG3_MASK (1U << CP0C3_M)
+#define KVM_REG_MIPS_CP0_CONFIG3_MASK ((1U << CP0C3_M) | \
+ (1U << CP0C3_MSAP))
#define KVM_REG_MIPS_CP0_CONFIG4_MASK (1U << CP0C4_M)
-#define KVM_REG_MIPS_CP0_CONFIG5_MASK ((1U << CP0C5_UFE) | \
+#define KVM_REG_MIPS_CP0_CONFIG5_MASK ((1U << CP0C5_MSAEn) | \
+ (1U << CP0C5_UFE) | \
(1U << CP0C5_FRE) | \
(1U << CP0C5_UFR))
@@ -564,17 +581,53 @@ static int kvm_mips_put_fpu_registers(CPUState *cs, int level)
ret = err;
}
- /* Floating point registers */
- for (i = 0; i < 32; ++i) {
- if (env->CP0_Status & (1 << CP0St_FR)) {
- err = kvm_mips_put_one_ureg64(cs, KVM_REG_MIPS_FPR_64(i),
- &env->active_fpu.fpr[i].d);
- } else {
- err = kvm_mips_get_one_ureg(cs, KVM_REG_MIPS_FPR_32(i),
- &env->active_fpu.fpr[i].w[FP_ENDIAN_IDX]);
+ /*
+ * FPU register state is a subset of MSA vector state, so don't put FPU
+ * registers if we're emulating a CPU with MSA.
+ */
+ if (!(env->CP0_Config3 & (1 << CP0C3_MSAP))) {
+ /* Floating point registers */
+ for (i = 0; i < 32; ++i) {
+ if (env->CP0_Status & (1 << CP0St_FR)) {
+ err = kvm_mips_put_one_ureg64(cs, KVM_REG_MIPS_FPR_64(i),
+ &env->active_fpu.fpr[i].d);
+ } else {
+ err = kvm_mips_get_one_ureg(cs, KVM_REG_MIPS_FPR_32(i),
+ &env->active_fpu.fpr[i].w[FP_ENDIAN_IDX]);
+ }
+ if (err < 0) {
+ DPRINTF("%s: Failed to put FPR%u (%d)\n", __func__, i, err);
+ ret = err;
+ }
}
+ }
+ }
+
+ /* Only put MSA state if we're emulating a CPU with MSA */
+ if (env->CP0_Config3 & (1 << CP0C3_MSAP)) {
+ /* MSA Control Registers */
+ if (level == KVM_PUT_FULL_STATE) {
+ err = kvm_mips_put_one_reg(cs, KVM_REG_MIPS_MSA_IR,
+ &env->msair);
+ if (err < 0) {
+ DPRINTF("%s: Failed to put MSA_IR (%d)\n", __func__, err);
+ ret = err;
+ }
+ }
+ err = kvm_mips_put_one_reg(cs, KVM_REG_MIPS_MSA_CSR,
+ &env->active_tc.msacsr);
+ if (err < 0) {
+ DPRINTF("%s: Failed to put MSA_CSR (%d)\n", __func__, err);
+ ret = err;
+ }
+
+ /* Vector registers (includes FP registers) */
+ for (i = 0; i < 32; ++i) {
+ /* Big endian MSA not supported by QEMU yet anyway */
+ err = kvm_mips_put_one_reg64(cs, KVM_REG_MIPS_VEC_128(i),
+ env->active_fpu.fpr[i].wr.d);
if (err < 0) {
- DPRINTF("%s: Failed to put FPR%u (%d)\n", __func__, i, err);
+ DPRINTF("%s: Failed to put VEC%u (%d)\n", __func__, i, err);
ret = err;
}
}
@@ -608,17 +661,53 @@ static int kvm_mips_get_fpu_registers(CPUState *cs)
restore_fp_status(env);
}
- /* Floating point registers */
- for (i = 0; i < 32; ++i) {
- if (env->CP0_Status & (1 << CP0St_FR)) {
- err = kvm_mips_get_one_ureg64(cs, KVM_REG_MIPS_FPR_64(i),
- &env->active_fpu.fpr[i].d);
- } else {
- err = kvm_mips_get_one_ureg(cs, KVM_REG_MIPS_FPR_32(i),
- &env->active_fpu.fpr[i].w[FP_ENDIAN_IDX]);
+ /*
+ * FPU register state is a subset of MSA vector state, so don't save FPU
+ * registers if we're emulating a CPU with MSA.
+ */
+ if (!(env->CP0_Config3 & (1 << CP0C3_MSAP))) {
+ /* Floating point registers */
+ for (i = 0; i < 32; ++i) {
+ if (env->CP0_Status & (1 << CP0St_FR)) {
+ err = kvm_mips_get_one_ureg64(cs, KVM_REG_MIPS_FPR_64(i),
+ &env->active_fpu.fpr[i].d);
+ } else {
+ err = kvm_mips_get_one_ureg(cs, KVM_REG_MIPS_FPR_32(i),
+ &env->active_fpu.fpr[i].w[FP_ENDIAN_IDX]);
+ }
+ if (err < 0) {
+ DPRINTF("%s: Failed to get FPR%u (%d)\n", __func__, i, err);
+ ret = err;
+ }
}
+ }
+ }
+
+ /* Only get MSA state if we're emulating a CPU with MSA */
+ if (env->CP0_Config3 & (1 << CP0C3_MSAP)) {
+ /* MSA Control Registers */
+ err = kvm_mips_get_one_reg(cs, KVM_REG_MIPS_MSA_IR,
+ &env->msair);
+ if (err < 0) {
+ DPRINTF("%s: Failed to get MSA_IR (%d)\n", __func__, err);
+ ret = err;
+ }
+ err = kvm_mips_get_one_reg(cs, KVM_REG_MIPS_MSA_CSR,
+ &env->active_tc.msacsr);
+ if (err < 0) {
+ DPRINTF("%s: Failed to get MSA_CSR (%d)\n", __func__, err);
+ ret = err;
+ } else {
+ restore_msa_fp_status(env);
+ }
+
+ /* Vector registers (includes FP registers) */
+ for (i = 0; i < 32; ++i) {
+ /* Big endian MSA not supported by QEMU yet anyway */
+ err = kvm_mips_get_one_reg64(cs, KVM_REG_MIPS_VEC_128(i),
+ env->active_fpu.fpr[i].wr.d);
if (err < 0) {
- DPRINTF("%s: Failed to get FPR%u (%d)\n", __func__, i, err);
+ DPRINTF("%s: Failed to get VEC%u (%d)\n", __func__, i, err);
ret = err;
}
}
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-16 09:57:36 +0000