aboutsummaryrefslogtreecommitdiff
path: root/target-arm
diff options
context:
space:
mode:
Diffstat (limited to 'target-arm')
-rw-r--r--target-arm/cpu-qom.h5
-rw-r--r--target-arm/cpu.c230
-rw-r--r--target-arm/cpu.h248
-rw-r--r--target-arm/helper.c2070
-rw-r--r--target-arm/helper.h11
-rw-r--r--target-arm/machine.c2
-rw-r--r--target-arm/op_helper.c42
-rw-r--r--target-arm/translate.c474
8 files changed, 1739 insertions, 1343 deletions
diff --git a/target-arm/cpu-qom.h b/target-arm/cpu-qom.h
index a61c68d21b..beabf9a0a9 100644
--- a/target-arm/cpu-qom.h
+++ b/target-arm/cpu-qom.h
@@ -58,6 +58,9 @@ typedef struct ARMCPU {
CPUARMState env;
+ /* Coprocessor information */
+ GHashTable *cp_regs;
+
/* The instance init functions for implementation-specific subclasses
* set these fields to specify the implementation-dependent values of
* various constant registers and reset values of non-constant
@@ -94,6 +97,7 @@ typedef struct ARMCPU {
*/
uint32_t ccsidr[16];
uint32_t reset_cbar;
+ uint32_t reset_auxcr;
} ARMCPU;
static inline ARMCPU *arm_env_get_cpu(CPUARMState *env)
@@ -104,5 +108,6 @@ static inline ARMCPU *arm_env_get_cpu(CPUARMState *env)
#define ENV_GET_CPU(e) CPU(arm_env_get_cpu(e))
void arm_cpu_realize(ARMCPU *cpu);
+void register_cp_regs_for_features(ARMCPU *cpu);
#endif
diff --git a/target-arm/cpu.c b/target-arm/cpu.c
index 7eb323ae4d..ae5795337f 100644
--- a/target-arm/cpu.c
+++ b/target-arm/cpu.c
@@ -23,6 +23,38 @@
#if !defined(CONFIG_USER_ONLY)
#include "hw/loader.h"
#endif
+#include "sysemu.h"
+
+static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque)
+{
+ /* Reset a single ARMCPRegInfo register */
+ ARMCPRegInfo *ri = value;
+ ARMCPU *cpu = opaque;
+
+ if (ri->type & ARM_CP_SPECIAL) {
+ return;
+ }
+
+ if (ri->resetfn) {
+ ri->resetfn(&cpu->env, ri);
+ return;
+ }
+
+ /* A zero offset is never possible as it would be regs[0]
+ * so we use it to indicate that reset is being handled elsewhere.
+ * This is basically only used for fields in non-core coprocessors
+ * (like the pxa2xx ones).
+ */
+ if (!ri->fieldoffset) {
+ return;
+ }
+
+ if (ri->type & ARM_CP_64BIT) {
+ CPREG_FIELD64(&cpu->env, ri) = ri->resetvalue;
+ } else {
+ CPREG_FIELD32(&cpu->env, ri) = ri->resetvalue;
+ }
+}
/* CPUClass::reset() */
static void arm_cpu_reset(CPUState *s)
@@ -39,30 +71,10 @@ static void arm_cpu_reset(CPUState *s)
acc->parent_reset(s);
memset(env, 0, offsetof(CPUARMState, breakpoints));
- env->cp15.c15_config_base_address = cpu->reset_cbar;
- env->cp15.c0_cpuid = cpu->midr;
+ g_hash_table_foreach(cpu->cp_regs, cp_reg_reset, cpu);
env->vfp.xregs[ARM_VFP_FPSID] = cpu->reset_fpsid;
env->vfp.xregs[ARM_VFP_MVFR0] = cpu->mvfr0;
env->vfp.xregs[ARM_VFP_MVFR1] = cpu->mvfr1;
- env->cp15.c0_cachetype = cpu->ctr;
- env->cp15.c1_sys = cpu->reset_sctlr;
- env->cp15.c0_c1[0] = cpu->id_pfr0;
- env->cp15.c0_c1[1] = cpu->id_pfr1;
- env->cp15.c0_c1[2] = cpu->id_dfr0;
- env->cp15.c0_c1[3] = cpu->id_afr0;
- env->cp15.c0_c1[4] = cpu->id_mmfr0;
- env->cp15.c0_c1[5] = cpu->id_mmfr1;
- env->cp15.c0_c1[6] = cpu->id_mmfr2;
- env->cp15.c0_c1[7] = cpu->id_mmfr3;
- env->cp15.c0_c2[0] = cpu->id_isar0;
- env->cp15.c0_c2[1] = cpu->id_isar1;
- env->cp15.c0_c2[2] = cpu->id_isar2;
- env->cp15.c0_c2[3] = cpu->id_isar3;
- env->cp15.c0_c2[4] = cpu->id_isar4;
- env->cp15.c0_c2[5] = cpu->id_isar5;
- env->cp15.c15_i_min = 0xff0;
- env->cp15.c0_clid = cpu->clidr;
- memcpy(env->cp15.c0_ccsid, cpu->ccsidr, ARRAY_SIZE(cpu->ccsidr));
if (arm_feature(env, ARM_FEATURE_IWMMXT)) {
env->iwmmxt.cregs[ARM_IWMMXT_wCID] = 0x69051000 | 'Q';
@@ -99,11 +111,6 @@ static void arm_cpu_reset(CPUState *s)
}
}
env->vfp.xregs[ARM_VFP_FPEXC] = 0;
- env->cp15.c2_base_mask = 0xffffc000u;
- /* v7 performance monitor control register: same implementor
- * field as main ID register, and we implement no event counters.
- */
- env->cp15.c9_pmcr = (cpu->midr & 0xff000000);
#endif
set_flush_to_zero(1, &env->vfp.standard_fp_status);
set_flush_inputs_to_zero(1, &env->vfp.standard_fp_status);
@@ -130,6 +137,14 @@ static void arm_cpu_initfn(Object *obj)
ARMCPU *cpu = ARM_CPU(obj);
cpu_exec_init(&cpu->env);
+ cpu->cp_regs = g_hash_table_new_full(g_int_hash, g_int_equal,
+ g_free, g_free);
+}
+
+static void arm_cpu_finalizefn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+ g_hash_table_destroy(cpu->cp_regs);
}
void arm_cpu_realize(ARMCPU *cpu)
@@ -145,6 +160,7 @@ void arm_cpu_realize(ARMCPU *cpu)
if (arm_feature(env, ARM_FEATURE_V7)) {
set_feature(env, ARM_FEATURE_VAPA);
set_feature(env, ARM_FEATURE_THUMB2);
+ set_feature(env, ARM_FEATURE_MPIDR);
if (!arm_feature(env, ARM_FEATURE_M)) {
set_feature(env, ARM_FEATURE_V6K);
} else {
@@ -176,6 +192,8 @@ void arm_cpu_realize(ARMCPU *cpu)
if (arm_feature(env, ARM_FEATURE_VFP3)) {
set_feature(env, ARM_FEATURE_VFP);
}
+
+ register_cp_regs_for_features(cpu);
}
/* CPU models */
@@ -185,7 +203,9 @@ static void arm926_initfn(Object *obj)
ARMCPU *cpu = ARM_CPU(obj);
set_feature(&cpu->env, ARM_FEATURE_V5);
set_feature(&cpu->env, ARM_FEATURE_VFP);
- cpu->midr = ARM_CPUID_ARM926;
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN);
+ cpu->midr = 0x41069265;
cpu->reset_fpsid = 0x41011090;
cpu->ctr = 0x1dd20d2;
cpu->reset_sctlr = 0x00090078;
@@ -196,7 +216,8 @@ static void arm946_initfn(Object *obj)
ARMCPU *cpu = ARM_CPU(obj);
set_feature(&cpu->env, ARM_FEATURE_V5);
set_feature(&cpu->env, ARM_FEATURE_MPU);
- cpu->midr = ARM_CPUID_ARM946;
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ cpu->midr = 0x41059461;
cpu->ctr = 0x0f004006;
cpu->reset_sctlr = 0x00000078;
}
@@ -207,10 +228,23 @@ static void arm1026_initfn(Object *obj)
set_feature(&cpu->env, ARM_FEATURE_V5);
set_feature(&cpu->env, ARM_FEATURE_VFP);
set_feature(&cpu->env, ARM_FEATURE_AUXCR);
- cpu->midr = ARM_CPUID_ARM1026;
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN);
+ cpu->midr = 0x4106a262;
cpu->reset_fpsid = 0x410110a0;
cpu->ctr = 0x1dd20d2;
cpu->reset_sctlr = 0x00090078;
+ cpu->reset_auxcr = 1;
+ {
+ /* The 1026 had an IFAR at c6,c0,0,1 rather than the ARMv6 c6,c0,0,2 */
+ ARMCPRegInfo ifar = {
+ .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c6_insn),
+ .resetvalue = 0
+ };
+ define_one_arm_cp_reg(cpu, &ifar);
+ }
}
static void arm1136_r2_initfn(Object *obj)
@@ -225,7 +259,10 @@ static void arm1136_r2_initfn(Object *obj)
*/
set_feature(&cpu->env, ARM_FEATURE_V6);
set_feature(&cpu->env, ARM_FEATURE_VFP);
- cpu->midr = ARM_CPUID_ARM1136_R2;
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS);
+ cpu->midr = 0x4107b362;
cpu->reset_fpsid = 0x410120b4;
cpu->mvfr0 = 0x11111111;
cpu->mvfr1 = 0x00000000;
@@ -243,6 +280,7 @@ static void arm1136_r2_initfn(Object *obj)
cpu->id_isar2 = 0x11231111;
cpu->id_isar3 = 0x01102131;
cpu->id_isar4 = 0x141;
+ cpu->reset_auxcr = 7;
}
static void arm1136_initfn(Object *obj)
@@ -251,7 +289,10 @@ static void arm1136_initfn(Object *obj)
set_feature(&cpu->env, ARM_FEATURE_V6K);
set_feature(&cpu->env, ARM_FEATURE_V6);
set_feature(&cpu->env, ARM_FEATURE_VFP);
- cpu->midr = ARM_CPUID_ARM1136;
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS);
+ cpu->midr = 0x4117b363;
cpu->reset_fpsid = 0x410120b4;
cpu->mvfr0 = 0x11111111;
cpu->mvfr1 = 0x00000000;
@@ -269,6 +310,7 @@ static void arm1136_initfn(Object *obj)
cpu->id_isar2 = 0x11231111;
cpu->id_isar3 = 0x01102131;
cpu->id_isar4 = 0x141;
+ cpu->reset_auxcr = 7;
}
static void arm1176_initfn(Object *obj)
@@ -277,7 +319,10 @@ static void arm1176_initfn(Object *obj)
set_feature(&cpu->env, ARM_FEATURE_V6K);
set_feature(&cpu->env, ARM_FEATURE_VFP);
set_feature(&cpu->env, ARM_FEATURE_VAPA);
- cpu->midr = ARM_CPUID_ARM1176;
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS);
+ cpu->midr = 0x410fb767;
cpu->reset_fpsid = 0x410120b5;
cpu->mvfr0 = 0x11111111;
cpu->mvfr1 = 0x00000000;
@@ -295,6 +340,7 @@ static void arm1176_initfn(Object *obj)
cpu->id_isar2 = 0x11231121;
cpu->id_isar3 = 0x01102131;
cpu->id_isar4 = 0x01141;
+ cpu->reset_auxcr = 7;
}
static void arm11mpcore_initfn(Object *obj)
@@ -303,11 +349,13 @@ static void arm11mpcore_initfn(Object *obj)
set_feature(&cpu->env, ARM_FEATURE_V6K);
set_feature(&cpu->env, ARM_FEATURE_VFP);
set_feature(&cpu->env, ARM_FEATURE_VAPA);
- cpu->midr = ARM_CPUID_ARM11MPCORE;
+ set_feature(&cpu->env, ARM_FEATURE_MPIDR);
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ cpu->midr = 0x410fb022;
cpu->reset_fpsid = 0x410120b4;
cpu->mvfr0 = 0x11111111;
cpu->mvfr1 = 0x00000000;
- cpu->ctr = 0x1dd20d2;
+ cpu->ctr = 0x1d192992; /* 32K icache 32K dcache */
cpu->id_pfr0 = 0x111;
cpu->id_pfr1 = 0x1;
cpu->id_dfr0 = 0;
@@ -320,6 +368,7 @@ static void arm11mpcore_initfn(Object *obj)
cpu->id_isar2 = 0x11221011;
cpu->id_isar3 = 0x01102131;
cpu->id_isar4 = 0x141;
+ cpu->reset_auxcr = 1;
}
static void cortex_m3_initfn(Object *obj)
@@ -327,9 +376,17 @@ static void cortex_m3_initfn(Object *obj)
ARMCPU *cpu = ARM_CPU(obj);
set_feature(&cpu->env, ARM_FEATURE_V7);
set_feature(&cpu->env, ARM_FEATURE_M);
- cpu->midr = ARM_CPUID_CORTEXM3;
+ cpu->midr = 0x410fc231;
}
+static const ARMCPRegInfo cortexa8_cp_reginfo[] = {
+ { .name = "L2LOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 0,
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+ { .name = "L2AUXCR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 2,
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+ REGINFO_SENTINEL
+};
+
static void cortex_a8_initfn(Object *obj)
{
ARMCPU *cpu = ARM_CPU(obj);
@@ -337,7 +394,8 @@ static void cortex_a8_initfn(Object *obj)
set_feature(&cpu->env, ARM_FEATURE_VFP3);
set_feature(&cpu->env, ARM_FEATURE_NEON);
set_feature(&cpu->env, ARM_FEATURE_THUMB2EE);
- cpu->midr = ARM_CPUID_CORTEXA8;
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ cpu->midr = 0x410fc080;
cpu->reset_fpsid = 0x410330c0;
cpu->mvfr0 = 0x11110222;
cpu->mvfr1 = 0x00011100;
@@ -360,8 +418,39 @@ static void cortex_a8_initfn(Object *obj)
cpu->ccsidr[0] = 0xe007e01a; /* 16k L1 dcache. */
cpu->ccsidr[1] = 0x2007e01a; /* 16k L1 icache. */
cpu->ccsidr[2] = 0xf0000000; /* No L2 icache. */
+ cpu->reset_auxcr = 2;
+ define_arm_cp_regs(cpu, cortexa8_cp_reginfo);
}
+static const ARMCPRegInfo cortexa9_cp_reginfo[] = {
+ /* power_control should be set to maximum latency. Again,
+ * default to 0 and set by private hook
+ */
+ { .name = "A9_PWRCTL", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW, .resetvalue = 0,
+ .fieldoffset = offsetof(CPUARMState, cp15.c15_power_control) },
+ { .name = "A9_DIAG", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW, .resetvalue = 0,
+ .fieldoffset = offsetof(CPUARMState, cp15.c15_diagnostic) },
+ { .name = "A9_PWRDIAG", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 2,
+ .access = PL1_RW, .resetvalue = 0,
+ .fieldoffset = offsetof(CPUARMState, cp15.c15_power_diagnostic) },
+ { .name = "NEONBUSY", .cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST },
+ /* TLB lockdown control */
+ { .name = "TLB_LOCKR", .cp = 15, .crn = 15, .crm = 4, .opc1 = 5, .opc2 = 2,
+ .access = PL1_W, .resetvalue = 0, .type = ARM_CP_NOP },
+ { .name = "TLB_LOCKW", .cp = 15, .crn = 15, .crm = 4, .opc1 = 5, .opc2 = 4,
+ .access = PL1_W, .resetvalue = 0, .type = ARM_CP_NOP },
+ { .name = "TLB_VA", .cp = 15, .crn = 15, .crm = 5, .opc1 = 5, .opc2 = 2,
+ .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST },
+ { .name = "TLB_PA", .cp = 15, .crn = 15, .crm = 6, .opc1 = 5, .opc2 = 2,
+ .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST },
+ { .name = "TLB_ATTR", .cp = 15, .crn = 15, .crm = 7, .opc1 = 5, .opc2 = 2,
+ .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST },
+ REGINFO_SENTINEL
+};
+
static void cortex_a9_initfn(Object *obj)
{
ARMCPU *cpu = ARM_CPU(obj);
@@ -375,7 +464,7 @@ static void cortex_a9_initfn(Object *obj)
* and valid configurations; we don't model A9UP).
*/
set_feature(&cpu->env, ARM_FEATURE_V7MP);
- cpu->midr = ARM_CPUID_CORTEXA9;
+ cpu->midr = 0x410fc090;
cpu->reset_fpsid = 0x41033090;
cpu->mvfr0 = 0x11110222;
cpu->mvfr1 = 0x01111111;
@@ -397,8 +486,40 @@ static void cortex_a9_initfn(Object *obj)
cpu->clidr = (1 << 27) | (1 << 24) | 3;
cpu->ccsidr[0] = 0xe00fe015; /* 16k L1 dcache. */
cpu->ccsidr[1] = 0x200fe015; /* 16k L1 icache. */
+ {
+ ARMCPRegInfo cbar = {
+ .name = "CBAR", .cp = 15, .crn = 15, .crm = 0, .opc1 = 4,
+ .opc2 = 0, .access = PL1_R|PL3_W, .resetvalue = cpu->reset_cbar,
+ .fieldoffset = offsetof(CPUARMState, cp15.c15_config_base_address)
+ };
+ define_one_arm_cp_reg(cpu, &cbar);
+ define_arm_cp_regs(cpu, cortexa9_cp_reginfo);
+ }
}
+#ifndef CONFIG_USER_ONLY
+static int a15_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ /* Linux wants the number of processors from here.
+ * Might as well set the interrupt-controller bit too.
+ */
+ *value = ((smp_cpus - 1) << 24) | (1 << 23);
+ return 0;
+}
+#endif
+
+static const ARMCPRegInfo cortexa15_cp_reginfo[] = {
+#ifndef CONFIG_USER_ONLY
+ { .name = "L2CTLR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 2,
+ .access = PL1_RW, .resetvalue = 0, .readfn = a15_l2ctlr_read,
+ .writefn = arm_cp_write_ignore, },
+#endif
+ { .name = "L2ECTLR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 3,
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+ REGINFO_SENTINEL
+};
+
static void cortex_a15_initfn(Object *obj)
{
ARMCPU *cpu = ARM_CPU(obj);
@@ -410,7 +531,8 @@ static void cortex_a15_initfn(Object *obj)
set_feature(&cpu->env, ARM_FEATURE_ARM_DIV);
set_feature(&cpu->env, ARM_FEATURE_V7MP);
set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER);
- cpu->midr = ARM_CPUID_CORTEXA15;
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ cpu->midr = 0x412fc0f1;
cpu->reset_fpsid = 0x410430f0;
cpu->mvfr0 = 0x10110222;
cpu->mvfr1 = 0x11111111;
@@ -433,6 +555,7 @@ static void cortex_a15_initfn(Object *obj)
cpu->ccsidr[0] = 0x701fe00a; /* 32K L1 dcache */
cpu->ccsidr[1] = 0x201fe00a; /* 32K L1 icache */
cpu->ccsidr[2] = 0x711fe07a; /* 4096K L2 unified cache */
+ define_arm_cp_regs(cpu, cortexa15_cp_reginfo);
}
static void ti925t_initfn(Object *obj)
@@ -449,7 +572,8 @@ static void sa1100_initfn(Object *obj)
{
ARMCPU *cpu = ARM_CPU(obj);
set_feature(&cpu->env, ARM_FEATURE_STRONGARM);
- cpu->midr = ARM_CPUID_SA1100;
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ cpu->midr = 0x4401A11B;
cpu->reset_sctlr = 0x00000070;
}
@@ -457,7 +581,8 @@ static void sa1110_initfn(Object *obj)
{
ARMCPU *cpu = ARM_CPU(obj);
set_feature(&cpu->env, ARM_FEATURE_STRONGARM);
- cpu->midr = ARM_CPUID_SA1110;
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ cpu->midr = 0x6901B119;
cpu->reset_sctlr = 0x00000070;
}
@@ -466,7 +591,7 @@ static void pxa250_initfn(Object *obj)
ARMCPU *cpu = ARM_CPU(obj);
set_feature(&cpu->env, ARM_FEATURE_V5);
set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- cpu->midr = ARM_CPUID_PXA250;
+ cpu->midr = 0x69052100;
cpu->ctr = 0xd172172;
cpu->reset_sctlr = 0x00000078;
}
@@ -476,7 +601,7 @@ static void pxa255_initfn(Object *obj)
ARMCPU *cpu = ARM_CPU(obj);
set_feature(&cpu->env, ARM_FEATURE_V5);
set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- cpu->midr = ARM_CPUID_PXA255;
+ cpu->midr = 0x69052d00;
cpu->ctr = 0xd172172;
cpu->reset_sctlr = 0x00000078;
}
@@ -486,7 +611,7 @@ static void pxa260_initfn(Object *obj)
ARMCPU *cpu = ARM_CPU(obj);
set_feature(&cpu->env, ARM_FEATURE_V5);
set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- cpu->midr = ARM_CPUID_PXA260;
+ cpu->midr = 0x69052903;
cpu->ctr = 0xd172172;
cpu->reset_sctlr = 0x00000078;
}
@@ -496,7 +621,7 @@ static void pxa261_initfn(Object *obj)
ARMCPU *cpu = ARM_CPU(obj);
set_feature(&cpu->env, ARM_FEATURE_V5);
set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- cpu->midr = ARM_CPUID_PXA261;
+ cpu->midr = 0x69052d05;
cpu->ctr = 0xd172172;
cpu->reset_sctlr = 0x00000078;
}
@@ -506,7 +631,7 @@ static void pxa262_initfn(Object *obj)
ARMCPU *cpu = ARM_CPU(obj);
set_feature(&cpu->env, ARM_FEATURE_V5);
set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- cpu->midr = ARM_CPUID_PXA262;
+ cpu->midr = 0x69052d06;
cpu->ctr = 0xd172172;
cpu->reset_sctlr = 0x00000078;
}
@@ -517,7 +642,7 @@ static void pxa270a0_initfn(Object *obj)
set_feature(&cpu->env, ARM_FEATURE_V5);
set_feature(&cpu->env, ARM_FEATURE_XSCALE);
set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
- cpu->midr = ARM_CPUID_PXA270_A0;
+ cpu->midr = 0x69054110;
cpu->ctr = 0xd172172;
cpu->reset_sctlr = 0x00000078;
}
@@ -528,7 +653,7 @@ static void pxa270a1_initfn(Object *obj)
set_feature(&cpu->env, ARM_FEATURE_V5);
set_feature(&cpu->env, ARM_FEATURE_XSCALE);
set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
- cpu->midr = ARM_CPUID_PXA270_A1;
+ cpu->midr = 0x69054111;
cpu->ctr = 0xd172172;
cpu->reset_sctlr = 0x00000078;
}
@@ -539,7 +664,7 @@ static void pxa270b0_initfn(Object *obj)
set_feature(&cpu->env, ARM_FEATURE_V5);
set_feature(&cpu->env, ARM_FEATURE_XSCALE);
set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
- cpu->midr = ARM_CPUID_PXA270_B0;
+ cpu->midr = 0x69054112;
cpu->ctr = 0xd172172;
cpu->reset_sctlr = 0x00000078;
}
@@ -550,7 +675,7 @@ static void pxa270b1_initfn(Object *obj)
set_feature(&cpu->env, ARM_FEATURE_V5);
set_feature(&cpu->env, ARM_FEATURE_XSCALE);
set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
- cpu->midr = ARM_CPUID_PXA270_B1;
+ cpu->midr = 0x69054113;
cpu->ctr = 0xd172172;
cpu->reset_sctlr = 0x00000078;
}
@@ -561,7 +686,7 @@ static void pxa270c0_initfn(Object *obj)
set_feature(&cpu->env, ARM_FEATURE_V5);
set_feature(&cpu->env, ARM_FEATURE_XSCALE);
set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
- cpu->midr = ARM_CPUID_PXA270_C0;
+ cpu->midr = 0x69054114;
cpu->ctr = 0xd172172;
cpu->reset_sctlr = 0x00000078;
}
@@ -572,7 +697,7 @@ static void pxa270c5_initfn(Object *obj)
set_feature(&cpu->env, ARM_FEATURE_V5);
set_feature(&cpu->env, ARM_FEATURE_XSCALE);
set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
- cpu->midr = ARM_CPUID_PXA270_C5;
+ cpu->midr = 0x69054117;
cpu->ctr = 0xd172172;
cpu->reset_sctlr = 0x00000078;
}
@@ -587,7 +712,7 @@ static void arm_any_initfn(Object *obj)
set_feature(&cpu->env, ARM_FEATURE_THUMB2EE);
set_feature(&cpu->env, ARM_FEATURE_ARM_DIV);
set_feature(&cpu->env, ARM_FEATURE_V7MP);
- cpu->midr = ARM_CPUID_ANY;
+ cpu->midr = 0xffffffff;
}
typedef struct ARMCPUInfo {
@@ -657,6 +782,7 @@ static const TypeInfo arm_cpu_type_info = {
.parent = TYPE_CPU,
.instance_size = sizeof(ARMCPU),
.instance_init = arm_cpu_initfn,
+ .instance_finalize = arm_cpu_finalizefn,
.abstract = true,
.class_size = sizeof(ARMCPUClass),
.class_init = arm_cpu_class_init,
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index d01285fd57..33afa185e9 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -107,12 +107,7 @@ typedef struct CPUARMState {
/* System control coprocessor (cp15) */
struct {
uint32_t c0_cpuid;
- uint32_t c0_cachetype;
- uint32_t c0_ccsid[16]; /* Cache size. */
- uint32_t c0_clid; /* Cache level. */
uint32_t c0_cssel; /* Cache size selection. */
- uint32_t c0_c1[8]; /* Feature registers. */
- uint32_t c0_c2[8]; /* Instruction set registers. */
uint32_t c1_sys; /* System control register. */
uint32_t c1_coproc; /* Coprocessor access register. */
uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */
@@ -228,12 +223,6 @@ typedef struct CPUARMState {
/* Internal CPU feature flags. */
uint32_t features;
- /* Coprocessor IO used by peripherals */
- struct {
- ARMReadCPFunc *cp_read;
- ARMWriteCPFunc *cp_write;
- void *opaque;
- } cp[15];
void *nvic;
const struct arm_boot_info *boot_info;
} CPUARMState;
@@ -392,6 +381,11 @@ enum arm_features {
ARM_FEATURE_VFP4, /* VFPv4 (implies that NEON is v2) */
ARM_FEATURE_GENERIC_TIMER,
ARM_FEATURE_MVFR, /* Media and VFP Feature Registers 0 and 1 */
+ ARM_FEATURE_DUMMY_C15_REGS, /* RAZ/WI all of cp15 crn=15 */
+ ARM_FEATURE_CACHE_TEST_CLEAN, /* 926/1026 style test-and-clean ops */
+ ARM_FEATURE_CACHE_DIRTY_REG, /* 1136/1176 cache dirty status register */
+ ARM_FEATURE_CACHE_BLOCK_OPS, /* v6 optional cache block operations */
+ ARM_FEATURE_MPIDR, /* has cp15 MPIDR */
};
static inline int arm_feature(CPUARMState *env, int feature)
@@ -406,45 +400,215 @@ void armv7m_nvic_set_pending(void *opaque, int irq);
int armv7m_nvic_acknowledge_irq(void *opaque);
void armv7m_nvic_complete_irq(void *opaque, int irq);
-void cpu_arm_set_cp_io(CPUARMState *env, int cpnum,
- ARMReadCPFunc *cp_read, ARMWriteCPFunc *cp_write,
- void *opaque);
+/* Interface for defining coprocessor registers.
+ * Registers are defined in tables of arm_cp_reginfo structs
+ * which are passed to define_arm_cp_regs().
+ */
+
+/* When looking up a coprocessor register we look for it
+ * via an integer which encodes all of:
+ * coprocessor number
+ * Crn, Crm, opc1, opc2 fields
+ * 32 or 64 bit register (ie is it accessed via MRC/MCR
+ * or via MRRC/MCRR?)
+ * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field.
+ * (In this case crn and opc2 should be zero.)
+ */
+#define ENCODE_CP_REG(cp, is64, crn, crm, opc1, opc2) \
+ (((cp) << 16) | ((is64) << 15) | ((crn) << 11) | \
+ ((crm) << 7) | ((opc1) << 3) | (opc2))
+
+#define DECODE_CPREG_CRN(enc) (((enc) >> 7) & 0xf)
+
+/* ARMCPRegInfo type field bits. If the SPECIAL bit is set this is a
+ * special-behaviour cp reg and bits [15..8] indicate what behaviour
+ * it has. Otherwise it is a simple cp reg, where CONST indicates that
+ * TCG can assume the value to be constant (ie load at translate time)
+ * and 64BIT indicates a 64 bit wide coprocessor register. SUPPRESS_TB_END
+ * indicates that the TB should not be ended after a write to this register
+ * (the default is that the TB ends after cp writes). OVERRIDE permits
+ * a register definition to override a previous definition for the
+ * same (cp, is64, crn, crm, opc1, opc2) tuple: either the new or the
+ * old must have the OVERRIDE bit set.
+ */
+#define ARM_CP_SPECIAL 1
+#define ARM_CP_CONST 2
+#define ARM_CP_64BIT 4
+#define ARM_CP_SUPPRESS_TB_END 8
+#define ARM_CP_OVERRIDE 16
+#define ARM_CP_NOP (ARM_CP_SPECIAL | (1 << 8))
+#define ARM_CP_WFI (ARM_CP_SPECIAL | (2 << 8))
+#define ARM_LAST_SPECIAL ARM_CP_WFI
+/* Used only as a terminator for ARMCPRegInfo lists */
+#define ARM_CP_SENTINEL 0xffff
+/* Mask of only the flag bits in a type field */
+#define ARM_CP_FLAG_MASK 0x1f
+
+/* Return true if cptype is a valid type field. This is used to try to
+ * catch errors where the sentinel has been accidentally left off the end
+ * of a list of registers.
+ */
+static inline bool cptype_valid(int cptype)
+{
+ return ((cptype & ~ARM_CP_FLAG_MASK) == 0)
+ || ((cptype & ARM_CP_SPECIAL) &&
+ (cptype <= ARM_LAST_SPECIAL));
+}
+
+/* Access rights:
+ * We define bits for Read and Write access for what rev C of the v7-AR ARM ARM
+ * defines as PL0 (user), PL1 (fiq/irq/svc/abt/und/sys, ie privileged), and
+ * PL2 (hyp). The other level which has Read and Write bits is Secure PL1
+ * (ie any of the privileged modes in Secure state, or Monitor mode).
+ * If a register is accessible in one privilege level it's always accessible
+ * in higher privilege levels too. Since "Secure PL1" also follows this rule
+ * (ie anything visible in PL2 is visible in S-PL1, some things are only
+ * visible in S-PL1) but "Secure PL1" is a bit of a mouthful, we bend the
+ * terminology a little and call this PL3.
+ *
+ * If access permissions for a register are more complex than can be
+ * described with these bits, then use a laxer set of restrictions, and
+ * do the more restrictive/complex check inside a helper function.
+ */
+#define PL3_R 0x80
+#define PL3_W 0x40
+#define PL2_R (0x20 | PL3_R)
+#define PL2_W (0x10 | PL3_W)
+#define PL1_R (0x08 | PL2_R)
+#define PL1_W (0x04 | PL2_W)
+#define PL0_R (0x02 | PL1_R)
+#define PL0_W (0x01 | PL1_W)
+
+#define PL3_RW (PL3_R | PL3_W)
+#define PL2_RW (PL2_R | PL2_W)
+#define PL1_RW (PL1_R | PL1_W)
+#define PL0_RW (PL0_R | PL0_W)
+
+static inline int arm_current_pl(CPUARMState *env)
+{
+ if ((env->uncached_cpsr & 0x1f) == ARM_CPU_MODE_USR) {
+ return 0;
+ }
+ /* We don't currently implement the Virtualization or TrustZone
+ * extensions, so PL2 and PL3 don't exist for us.
+ */
+ return 1;
+}
+
+typedef struct ARMCPRegInfo ARMCPRegInfo;
+
+/* Access functions for coprocessor registers. These should return
+ * 0 on success, or one of the EXCP_* constants if access should cause
+ * an exception (in which case *value is not written).
+ */
+typedef int CPReadFn(CPUARMState *env, const ARMCPRegInfo *opaque,
+ uint64_t *value);
+typedef int CPWriteFn(CPUARMState *env, const ARMCPRegInfo *opaque,
+ uint64_t value);
+/* Hook function for register reset */
+typedef void CPResetFn(CPUARMState *env, const ARMCPRegInfo *opaque);
+
+#define CP_ANY 0xff
+
+/* Definition of an ARM coprocessor register */
+struct ARMCPRegInfo {
+ /* Name of register (useful mainly for debugging, need not be unique) */
+ const char *name;
+ /* Location of register: coprocessor number and (crn,crm,opc1,opc2)
+ * tuple. Any of crm, opc1 and opc2 may be CP_ANY to indicate a
+ * 'wildcard' field -- any value of that field in the MRC/MCR insn
+ * will be decoded to this register. The register read and write
+ * callbacks will be passed an ARMCPRegInfo with the crn/crm/opc1/opc2
+ * used by the program, so it is possible to register a wildcard and
+ * then behave differently on read/write if necessary.
+ * For 64 bit registers, only crm and opc1 are relevant; crn and opc2
+ * must both be zero.
+ */
+ uint8_t cp;
+ uint8_t crn;
+ uint8_t crm;
+ uint8_t opc1;
+ uint8_t opc2;
+ /* Register type: ARM_CP_* bits/values */
+ int type;
+ /* Access rights: PL*_[RW] */
+ int access;
+ /* The opaque pointer passed to define_arm_cp_regs_with_opaque() when
+ * this register was defined: can be used to hand data through to the
+ * register read/write functions, since they are passed the ARMCPRegInfo*.
+ */
+ void *opaque;
+ /* Value of this register, if it is ARM_CP_CONST. Otherwise, if
+ * fieldoffset is non-zero, the reset value of the register.
+ */
+ uint64_t resetvalue;
+ /* Offset of the field in CPUARMState for this register. This is not
+ * needed if either:
+ * 1. type is ARM_CP_CONST or one of the ARM_CP_SPECIALs
+ * 2. both readfn and writefn are specified
+ */
+ ptrdiff_t fieldoffset; /* offsetof(CPUARMState, field) */
+ /* Function for handling reads of this register. If NULL, then reads
+ * will be done by loading from the offset into CPUARMState specified
+ * by fieldoffset.
+ */
+ CPReadFn *readfn;
+ /* Function for handling writes of this register. If NULL, then writes
+ * will be done by writing to the offset into CPUARMState specified
+ * by fieldoffset.
+ */
+ CPWriteFn *writefn;
+ /* Function for resetting the register. If NULL, then reset will be done
+ * by writing resetvalue to the field specified in fieldoffset. If
+ * fieldoffset is 0 then no reset will be done.
+ */
+ CPResetFn *resetfn;
+};
+
+/* Macros which are lvalues for the field in CPUARMState for the
+ * ARMCPRegInfo *ri.
+ */
+#define CPREG_FIELD32(env, ri) \
+ (*(uint32_t *)((char *)(env) + (ri)->fieldoffset))
+#define CPREG_FIELD64(env, ri) \
+ (*(uint64_t *)((char *)(env) + (ri)->fieldoffset))
+
+#define REGINFO_SENTINEL { .type = ARM_CP_SENTINEL }
+
+void define_arm_cp_regs_with_opaque(ARMCPU *cpu,
+ const ARMCPRegInfo *regs, void *opaque);
+void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu,
+ const ARMCPRegInfo *regs, void *opaque);
+static inline void define_arm_cp_regs(ARMCPU *cpu, const ARMCPRegInfo *regs)
+{
+ define_arm_cp_regs_with_opaque(cpu, regs, 0);
+}
+static inline void define_one_arm_cp_reg(ARMCPU *cpu, const ARMCPRegInfo *regs)
+{
+ define_one_arm_cp_reg_with_opaque(cpu, regs, 0);
+}
+const ARMCPRegInfo *get_arm_cp_reginfo(ARMCPU *cpu, uint32_t encoded_cp);
+
+/* CPWriteFn that can be used to implement writes-ignored behaviour */
+int arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value);
+/* CPReadFn that can be used for read-as-zero behaviour */
+int arm_cp_read_zero(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t *value);
+
+static inline bool cp_access_ok(CPUARMState *env,
+ const ARMCPRegInfo *ri, int isread)
+{
+ return (ri->access >> ((arm_current_pl(env) * 2) + isread)) & 1;
+}
/* Does the core conform to the the "MicroController" profile. e.g. Cortex-M3.
Note the M in older cores (eg. ARM7TDMI) stands for Multiply. These are
conventional cores (ie. Application or Realtime profile). */
#define IS_M(env) arm_feature(env, ARM_FEATURE_M)
-#define ARM_CPUID(env) (env->cp15.c0_cpuid)
-#define ARM_CPUID_ARM1026 0x4106a262
-#define ARM_CPUID_ARM926 0x41069265
-#define ARM_CPUID_ARM946 0x41059461
#define ARM_CPUID_TI915T 0x54029152
#define ARM_CPUID_TI925T 0x54029252
-#define ARM_CPUID_SA1100 0x4401A11B
-#define ARM_CPUID_SA1110 0x6901B119
-#define ARM_CPUID_PXA250 0x69052100
-#define ARM_CPUID_PXA255 0x69052d00
-#define ARM_CPUID_PXA260 0x69052903
-#define ARM_CPUID_PXA261 0x69052d05
-#define ARM_CPUID_PXA262 0x69052d06
-#define ARM_CPUID_PXA270 0x69054110
-#define ARM_CPUID_PXA270_A0 0x69054110
-#define ARM_CPUID_PXA270_A1 0x69054111
-#define ARM_CPUID_PXA270_B0 0x69054112
-#define ARM_CPUID_PXA270_B1 0x69054113
-#define ARM_CPUID_PXA270_C0 0x69054114
-#define ARM_CPUID_PXA270_C5 0x69054117
-#define ARM_CPUID_ARM1136 0x4117b363
-#define ARM_CPUID_ARM1136_R2 0x4107b362
-#define ARM_CPUID_ARM1176 0x410fb767
-#define ARM_CPUID_ARM11MPCORE 0x410fb022
-#define ARM_CPUID_CORTEXA8 0x410fc080
-#define ARM_CPUID_CORTEXA9 0x410fc090
-#define ARM_CPUID_CORTEXA15 0x412fc0f1
-#define ARM_CPUID_CORTEXM3 0x410fc231
-#define ARM_CPUID_ANY 0xffffffff
#if defined(CONFIG_USER_ONLY)
#define TARGET_PAGE_BITS 12
@@ -472,7 +636,7 @@ static inline CPUARMState *cpu_init(const char *cpu_model)
#define cpu_signal_handler cpu_arm_signal_handler
#define cpu_list arm_cpu_list
-#define CPU_SAVE_VERSION 6
+#define CPU_SAVE_VERSION 7
/* MMU modes definitions */
#define MMU_MODE0_SUFFIX _kernel
diff --git a/target-arm/helper.c b/target-arm/helper.c
index bbb1d05d10..23099236ad 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -4,6 +4,13 @@
#include "host-utils.h"
#include "sysemu.h"
+#ifndef CONFIG_USER_ONLY
+static inline int get_phys_addr(CPUARMState *env, uint32_t address,
+ int access_type, int is_user,
+ uint32_t *phys_ptr, int *prot,
+ target_ulong *page_size);
+#endif
+
static int vfp_gdb_get_reg(CPUARMState *env, uint8_t *buf, int reg)
{
int nregs;
@@ -56,6 +63,1054 @@ static int vfp_gdb_set_reg(CPUARMState *env, uint8_t *buf, int reg)
return 0;
}
+static int dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
+{
+ env->cp15.c3 = value;
+ tlb_flush(env, 1); /* Flush TLB as domain not tracked in TLB */
+ return 0;
+}
+
+static int fcse_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
+{
+ if (env->cp15.c13_fcse != value) {
+ /* Unlike real hardware the qemu TLB uses virtual addresses,
+ * not modified virtual addresses, so this causes a TLB flush.
+ */
+ tlb_flush(env, 1);
+ env->cp15.c13_fcse = value;
+ }
+ return 0;
+}
+static int contextidr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ if (env->cp15.c13_context != value && !arm_feature(env, ARM_FEATURE_MPU)) {
+ /* For VMSA (when not using the LPAE long descriptor page table
+ * format) this register includes the ASID, so do a TLB flush.
+ * For PMSA it is purely a process ID and no action is needed.
+ */
+ tlb_flush(env, 1);
+ }
+ env->cp15.c13_context = value;
+ return 0;
+}
+
+static int tlbiall_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ /* Invalidate all (TLBIALL) */
+ tlb_flush(env, 1);
+ return 0;
+}
+
+static int tlbimva_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ /* Invalidate single TLB entry by MVA and ASID (TLBIMVA) */
+ tlb_flush_page(env, value & TARGET_PAGE_MASK);
+ return 0;
+}
+
+static int tlbiasid_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ /* Invalidate by ASID (TLBIASID) */
+ tlb_flush(env, value == 0);
+ return 0;
+}
+
+static int tlbimvaa_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ /* Invalidate single entry by MVA, all ASIDs (TLBIMVAA) */
+ tlb_flush_page(env, value & TARGET_PAGE_MASK);
+ return 0;
+}
+
+static const ARMCPRegInfo cp_reginfo[] = {
+ /* DBGDIDR: just RAZ. In particular this means the "debug architecture
+ * version" bits will read as a reserved value, which should cause
+ * Linux to not try to use the debug hardware.
+ */
+ { .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ /* MMU Domain access control / MPU write buffer control */
+ { .name = "DACR", .cp = 15,
+ .crn = 3, .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
+ .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c3),
+ .resetvalue = 0, .writefn = dacr_write },
+ { .name = "FCSEIDR", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c13_fcse),
+ .resetvalue = 0, .writefn = fcse_write },
+ { .name = "CONTEXTIDR", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c13_fcse),
+ .resetvalue = 0, .writefn = contextidr_write },
+ /* ??? This covers not just the impdef TLB lockdown registers but also
+ * some v7VMSA registers relating to TEX remap, so it is overly broad.
+ */
+ { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = CP_ANY,
+ .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP },
+ /* MMU TLB control. Note that the wildcarding means we cover not just
+ * the unified TLB ops but also the dside/iside/inner-shareable variants.
+ */
+ { .name = "TLBIALL", .cp = 15, .crn = 8, .crm = CP_ANY,
+ .opc1 = CP_ANY, .opc2 = 0, .access = PL1_W, .writefn = tlbiall_write, },
+ { .name = "TLBIMVA", .cp = 15, .crn = 8, .crm = CP_ANY,
+ .opc1 = CP_ANY, .opc2 = 1, .access = PL1_W, .writefn = tlbimva_write, },
+ { .name = "TLBIASID", .cp = 15, .crn = 8, .crm = CP_ANY,
+ .opc1 = CP_ANY, .opc2 = 2, .access = PL1_W, .writefn = tlbiasid_write, },
+ { .name = "TLBIMVAA", .cp = 15, .crn = 8, .crm = CP_ANY,
+ .opc1 = CP_ANY, .opc2 = 3, .access = PL1_W, .writefn = tlbimvaa_write, },
+ /* Cache maintenance ops; some of this space may be overridden later. */
+ { .name = "CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY,
+ .opc1 = 0, .opc2 = CP_ANY, .access = PL1_W,
+ .type = ARM_CP_NOP | ARM_CP_OVERRIDE },
+ REGINFO_SENTINEL
+};
+
+static const ARMCPRegInfo not_v6_cp_reginfo[] = {
+ /* Not all pre-v6 cores implemented this WFI, so this is slightly
+ * over-broad.
+ */
+ { .name = "WFI_v5", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = 2,
+ .access = PL1_W, .type = ARM_CP_WFI },
+ REGINFO_SENTINEL
+};
+
+static const ARMCPRegInfo not_v7_cp_reginfo[] = {
+ /* Standard v6 WFI (also used in some pre-v6 cores); not in v7 (which
+ * is UNPREDICTABLE; we choose to NOP as most implementations do).
+ */
+ { .name = "WFI_v6", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4,
+ .access = PL1_W, .type = ARM_CP_WFI },
+ /* L1 cache lockdown. Not architectural in v6 and earlier but in practice
+ * implemented in 926, 946, 1026, 1136, 1176 and 11MPCore. StrongARM and
+ * OMAPCP will override this space.
+ */
+ { .name = "DLOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_data),
+ .resetvalue = 0 },
+ { .name = "ILOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_insn),
+ .resetvalue = 0 },
+ /* v6 doesn't have the cache ID registers but Linux reads them anyway */
+ { .name = "DUMMY", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = CP_ANY,
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ REGINFO_SENTINEL
+};
+
+static int cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
+{
+ if (env->cp15.c1_coproc != value) {
+ env->cp15.c1_coproc = value;
+ /* ??? Is this safe when called from within a TB? */
+ tb_flush(env);
+ }
+ return 0;
+}
+
+static const ARMCPRegInfo v6_cp_reginfo[] = {
+ /* prefetch by MVA in v6, NOP in v7 */
+ { .name = "MVA_prefetch",
+ .cp = 15, .crn = 7, .crm = 13, .opc1 = 0, .opc2 = 1,
+ .access = PL1_W, .type = ARM_CP_NOP },
+ { .name = "ISB", .cp = 15, .crn = 7, .crm = 5, .opc1 = 0, .opc2 = 4,
+ .access = PL0_W, .type = ARM_CP_NOP },
+ { .name = "ISB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 4,
+ .access = PL0_W, .type = ARM_CP_NOP },
+ { .name = "ISB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 5,
+ .access = PL0_W, .type = ARM_CP_NOP },
+ { .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 2,
+ .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c6_insn),
+ .resetvalue = 0, },
+ /* Watchpoint Fault Address Register : should actually only be present
+ * for 1136, 1176, 11MPCore.
+ */
+ { .name = "WFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, },
+ { .name = "CPACR", .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 2,
+ .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_coproc),
+ .resetvalue = 0, .writefn = cpacr_write },
+ REGINFO_SENTINEL
+};
+
+static int pmreg_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ /* Generic performance monitor register read function for where
+ * user access may be allowed by PMUSERENR.
+ */
+ if (arm_current_pl(env) == 0 && !env->cp15.c9_pmuserenr) {
+ return EXCP_UDEF;
+ }
+ *value = CPREG_FIELD32(env, ri);
+ return 0;
+}
+
+static int pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ if (arm_current_pl(env) == 0 && !env->cp15.c9_pmuserenr) {
+ return EXCP_UDEF;
+ }
+ /* only the DP, X, D and E bits are writable */
+ env->cp15.c9_pmcr &= ~0x39;
+ env->cp15.c9_pmcr |= (value & 0x39);
+ return 0;
+}
+
+static int pmcntenset_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ if (arm_current_pl(env) == 0 && !env->cp15.c9_pmuserenr) {
+ return EXCP_UDEF;
+ }
+ value &= (1 << 31);
+ env->cp15.c9_pmcnten |= value;
+ return 0;
+}
+
+static int pmcntenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ if (arm_current_pl(env) == 0 && !env->cp15.c9_pmuserenr) {
+ return EXCP_UDEF;
+ }
+ value &= (1 << 31);
+ env->cp15.c9_pmcnten &= ~value;
+ return 0;
+}
+
+static int pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ if (arm_current_pl(env) == 0 && !env->cp15.c9_pmuserenr) {
+ return EXCP_UDEF;
+ }
+ env->cp15.c9_pmovsr &= ~value;
+ return 0;
+}
+
+static int pmxevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ if (arm_current_pl(env) == 0 && !env->cp15.c9_pmuserenr) {
+ return EXCP_UDEF;
+ }
+ env->cp15.c9_pmxevtyper = value & 0xff;
+ return 0;
+}
+
+static int pmuserenr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ env->cp15.c9_pmuserenr = value & 1;
+ return 0;
+}
+
+static int pmintenset_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ /* We have no event counters so only the C bit can be changed */
+ value &= (1 << 31);
+ env->cp15.c9_pminten |= value;
+ return 0;
+}
+
+static int pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ value &= (1 << 31);
+ env->cp15.c9_pminten &= ~value;
+ return 0;
+}
+
+static int ccsidr_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ ARMCPU *cpu = arm_env_get_cpu(env);
+ *value = cpu->ccsidr[env->cp15.c0_cssel];
+ return 0;
+}
+
+static int csselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ env->cp15.c0_cssel = value & 0xf;
+ return 0;
+}
+
+static const ARMCPRegInfo v7_cp_reginfo[] = {
+ /* DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped
+ * debug components
+ */
+ { .name = "DBGDRAR", .cp = 14, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ { .name = "DBGDRAR", .cp = 14, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ /* the old v6 WFI, UNPREDICTABLE in v7 but we choose to NOP */
+ { .name = "NOP", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4,
+ .access = PL1_W, .type = ARM_CP_NOP },
+ /* Performance monitors are implementation defined in v7,
+ * but with an ARM recommended set of registers, which we
+ * follow (although we don't actually implement any counters)
+ *
+ * Performance registers fall into three categories:
+ * (a) always UNDEF in PL0, RW in PL1 (PMINTENSET, PMINTENCLR)
+ * (b) RO in PL0 (ie UNDEF on write), RW in PL1 (PMUSERENR)
+ * (c) UNDEF in PL0 if PMUSERENR.EN==0, otherwise accessible (all others)
+ * For the cases controlled by PMUSERENR we must set .access to PL0_RW
+ * or PL0_RO as appropriate and then check PMUSERENR in the helper fn.
+ */
+ { .name = "PMCNTENSET", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 1,
+ .access = PL0_RW, .resetvalue = 0,
+ .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten),
+ .readfn = pmreg_read, .writefn = pmcntenset_write },
+ { .name = "PMCNTENCLR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 2,
+ .access = PL0_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten),
+ .readfn = pmreg_read, .writefn = pmcntenclr_write },
+ { .name = "PMOVSR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 3,
+ .access = PL0_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr),
+ .readfn = pmreg_read, .writefn = pmovsr_write },
+ /* Unimplemented so WI. Strictly speaking write accesses in PL0 should
+ * respect PMUSERENR.
+ */
+ { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4,
+ .access = PL0_W, .type = ARM_CP_NOP },
+ /* Since we don't implement any events, writing to PMSELR is UNPREDICTABLE.
+ * We choose to RAZ/WI. XXX should respect PMUSERENR.
+ */
+ { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
+ .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+ /* Unimplemented, RAZ/WI. XXX PMUSERENR */
+ { .name = "PMCCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 0,
+ .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+ { .name = "PMXEVTYPER", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 1,
+ .access = PL0_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c9_pmxevtyper),
+ .readfn = pmreg_read, .writefn = pmxevtyper_write },
+ /* Unimplemented, RAZ/WI. XXX PMUSERENR */
+ { .name = "PMXEVCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 2,
+ .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+ { .name = "PMUSERENR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 0,
+ .access = PL0_R | PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr),
+ .resetvalue = 0,
+ .writefn = pmuserenr_write },
+ { .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
+ .resetvalue = 0,
+ .writefn = pmintenset_write },
+ { .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
+ .resetvalue = 0,
+ .writefn = pmintenclr_write },
+ { .name = "SCR", .cp = 15, .crn = 1, .crm = 1, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_scr),
+ .resetvalue = 0, },
+ { .name = "CCSIDR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 0,
+ .access = PL1_R, .readfn = ccsidr_read },
+ { .name = "CSSELR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 2, .opc2 = 0,
+ .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c0_cssel),
+ .writefn = csselr_write, .resetvalue = 0 },
+ /* Auxiliary ID register: this actually has an IMPDEF value but for now
+ * just RAZ for all cores:
+ */
+ { .name = "AIDR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 7,
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ REGINFO_SENTINEL
+};
+
+static int teecr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
+{
+ value &= 1;
+ env->teecr = value;
+ return 0;
+}
+
+static int teehbr_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ /* This is a helper function because the user access rights
+ * depend on the value of the TEECR.
+ */
+ if (arm_current_pl(env) == 0 && (env->teecr & 1)) {
+ return EXCP_UDEF;
+ }
+ *value = env->teehbr;
+ return 0;
+}
+
+static int teehbr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ if (arm_current_pl(env) == 0 && (env->teecr & 1)) {
+ return EXCP_UDEF;
+ }
+ env->teehbr = value;
+ return 0;
+}
+
+static const ARMCPRegInfo t2ee_cp_reginfo[] = {
+ { .name = "TEECR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 6, .opc2 = 0,
+ .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, teecr),
+ .resetvalue = 0,
+ .writefn = teecr_write },
+ { .name = "TEEHBR", .cp = 14, .crn = 1, .crm = 0, .opc1 = 6, .opc2 = 0,
+ .access = PL0_RW, .fieldoffset = offsetof(CPUARMState, teehbr),
+ .resetvalue = 0,
+ .readfn = teehbr_read, .writefn = teehbr_write },
+ REGINFO_SENTINEL
+};
+
+static const ARMCPRegInfo v6k_cp_reginfo[] = {
+ { .name = "TPIDRURW", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 2,
+ .access = PL0_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c13_tls1),
+ .resetvalue = 0 },
+ { .name = "TPIDRURO", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 3,
+ .access = PL0_R|PL1_W,
+ .fieldoffset = offsetof(CPUARMState, cp15.c13_tls2),
+ .resetvalue = 0 },
+ { .name = "TPIDRPRW", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 4,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c13_tls3),
+ .resetvalue = 0 },
+ REGINFO_SENTINEL
+};
+
+static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
+ /* Dummy implementation: RAZ/WI the whole crn=14 space */
+ { .name = "GENERIC_TIMER", .cp = 15, .crn = 14,
+ .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+ REGINFO_SENTINEL
+};
+
+static int par_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
+{
+ if (arm_feature(env, ARM_FEATURE_V7)) {
+ env->cp15.c7_par = value & 0xfffff6ff;
+ } else {
+ env->cp15.c7_par = value & 0xfffff1ff;
+ }
+ return 0;
+}
+
+#ifndef CONFIG_USER_ONLY
+/* get_phys_addr() isn't present for user-mode-only targets */
+static int ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
+{
+ uint32_t phys_addr;
+ target_ulong page_size;
+ int prot;
+ int ret, is_user = ri->opc2 & 2;
+ int access_type = ri->opc2 & 1;
+
+ if (ri->opc2 & 4) {
+ /* Other states are only available with TrustZone */
+ return EXCP_UDEF;
+ }
+ ret = get_phys_addr(env, value, access_type, is_user,
+ &phys_addr, &prot, &page_size);
+ if (ret == 0) {
+ /* We do not set any attribute bits in the PAR */
+ if (page_size == (1 << 24)
+ && arm_feature(env, ARM_FEATURE_V7)) {
+ env->cp15.c7_par = (phys_addr & 0xff000000) | 1 << 1;
+ } else {
+ env->cp15.c7_par = phys_addr & 0xfffff000;
+ }
+ } else {
+ env->cp15.c7_par = ((ret & (10 << 1)) >> 5) |
+ ((ret & (12 << 1)) >> 6) |
+ ((ret & 0xf) << 1) | 1;
+ }
+ return 0;
+}
+#endif
+
+static const ARMCPRegInfo vapa_cp_reginfo[] = {
+ { .name = "PAR", .cp = 15, .crn = 7, .crm = 4, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW, .resetvalue = 0,
+ .fieldoffset = offsetof(CPUARMState, cp15.c7_par),
+ .writefn = par_write },
+#ifndef CONFIG_USER_ONLY
+ { .name = "ATS", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = CP_ANY,
+ .access = PL1_W, .writefn = ats_write },
+#endif
+ REGINFO_SENTINEL
+};
+
+/* Return basic MPU access permission bits. */
+static uint32_t simple_mpu_ap_bits(uint32_t val)
+{
+ uint32_t ret;
+ uint32_t mask;
+ int i;
+ ret = 0;
+ mask = 3;
+ for (i = 0; i < 16; i += 2) {
+ ret |= (val >> i) & mask;
+ mask <<= 2;
+ }
+ return ret;
+}
+
+/* Pad basic MPU access permission bits to extended format. */
+static uint32_t extended_mpu_ap_bits(uint32_t val)
+{
+ uint32_t ret;
+ uint32_t mask;
+ int i;
+ ret = 0;
+ mask = 3;
+ for (i = 0; i < 16; i += 2) {
+ ret |= (val & mask) << i;
+ mask <<= 2;
+ }
+ return ret;
+}
+
+static int pmsav5_data_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ env->cp15.c5_data = extended_mpu_ap_bits(value);
+ return 0;
+}
+
+static int pmsav5_data_ap_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ *value = simple_mpu_ap_bits(env->cp15.c5_data);
+ return 0;
+}
+
+static int pmsav5_insn_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ env->cp15.c5_insn = extended_mpu_ap_bits(value);
+ return 0;
+}
+
+static int pmsav5_insn_ap_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ *value = simple_mpu_ap_bits(env->cp15.c5_insn);
+ return 0;
+}
+
+static int arm946_prbs_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ if (ri->crm > 8) {
+ return EXCP_UDEF;
+ }
+ *value = env->cp15.c6_region[ri->crm];
+ return 0;
+}
+
+static int arm946_prbs_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ if (ri->crm > 8) {
+ return EXCP_UDEF;
+ }
+ env->cp15.c6_region[ri->crm] = value;
+ return 0;
+}
+
+static const ARMCPRegInfo pmsav5_cp_reginfo[] = {
+ { .name = "DATA_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c5_data), .resetvalue = 0,
+ .readfn = pmsav5_data_ap_read, .writefn = pmsav5_data_ap_write, },
+ { .name = "INSN_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c5_insn), .resetvalue = 0,
+ .readfn = pmsav5_insn_ap_read, .writefn = pmsav5_insn_ap_write, },
+ { .name = "DATA_EXT_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 2,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c5_data), .resetvalue = 0, },
+ { .name = "INSN_EXT_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 3,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c5_insn), .resetvalue = 0, },
+ { .name = "DCACHE_CFG", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c2_data), .resetvalue = 0, },
+ { .name = "ICACHE_CFG", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c2_insn), .resetvalue = 0, },
+ /* Protection region base and size registers */
+ { .name = "946_PRBS", .cp = 15, .crn = 6, .crm = CP_ANY, .opc1 = 0,
+ .opc2 = CP_ANY, .access = PL1_RW,
+ .readfn = arm946_prbs_read, .writefn = arm946_prbs_write, },
+ REGINFO_SENTINEL
+};
+
+static int vmsa_ttbcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ value &= 7;
+ env->cp15.c2_control = value;
+ env->cp15.c2_mask = ~(((uint32_t)0xffffffffu) >> value);
+ env->cp15.c2_base_mask = ~((uint32_t)0x3fffu >> value);
+ return 0;
+}
+
+static void vmsa_ttbcr_reset(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+ env->cp15.c2_base_mask = 0xffffc000u;
+ env->cp15.c2_control = 0;
+ env->cp15.c2_mask = 0;
+}
+
+static const ARMCPRegInfo vmsa_cp_reginfo[] = {
+ { .name = "DFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c5_data), .resetvalue = 0, },
+ { .name = "IFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c5_insn), .resetvalue = 0, },
+ { .name = "TTBR0", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c2_base0), .resetvalue = 0, },
+ { .name = "TTBR1", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c2_base0), .resetvalue = 0, },
+ { .name = "TTBCR", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
+ .access = PL1_RW, .writefn = vmsa_ttbcr_write,
+ .resetfn = vmsa_ttbcr_reset,
+ .fieldoffset = offsetof(CPUARMState, cp15.c2_control) },
+ { .name = "DFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c6_data),
+ .resetvalue = 0, },
+ REGINFO_SENTINEL
+};
+
+static int omap_ticonfig_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ env->cp15.c15_ticonfig = value & 0xe7;
+ /* The OS_TYPE bit in this register changes the reported CPUID! */
+ env->cp15.c0_cpuid = (value & (1 << 5)) ?
+ ARM_CPUID_TI915T : ARM_CPUID_TI925T;
+ return 0;
+}
+
+static int omap_threadid_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ env->cp15.c15_threadid = value & 0xffff;
+ return 0;
+}
+
+static int omap_wfi_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ /* Wait-for-interrupt (deprecated) */
+ cpu_interrupt(env, CPU_INTERRUPT_HALT);
+ return 0;
+}
+
+static int omap_cachemaint_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ /* On OMAP there are registers indicating the max/min index of dcache lines
+ * containing a dirty line; cache flush operations have to reset these.
+ */
+ env->cp15.c15_i_max = 0x000;
+ env->cp15.c15_i_min = 0xff0;
+ return 0;
+}
+
+static const ARMCPRegInfo omap_cp_reginfo[] = {
+ { .name = "DFSR", .cp = 15, .crn = 5, .crm = CP_ANY,
+ .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_OVERRIDE,
+ .fieldoffset = offsetof(CPUARMState, cp15.c5_data), .resetvalue = 0, },
+ { .name = "", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW, .type = ARM_CP_NOP },
+ { .name = "TICONFIG", .cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c15_ticonfig), .resetvalue = 0,
+ .writefn = omap_ticonfig_write },
+ { .name = "IMAX", .cp = 15, .crn = 15, .crm = 2, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c15_i_max), .resetvalue = 0, },
+ { .name = "IMIN", .cp = 15, .crn = 15, .crm = 3, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW, .resetvalue = 0xff0,
+ .fieldoffset = offsetof(CPUARMState, cp15.c15_i_min) },
+ { .name = "THREADID", .cp = 15, .crn = 15, .crm = 4, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c15_threadid), .resetvalue = 0,
+ .writefn = omap_threadid_write },
+ { .name = "TI925T_STATUS", .cp = 15, .crn = 15,
+ .crm = 8, .opc1 = 0, .opc2 = 0, .access = PL1_RW,
+ .readfn = arm_cp_read_zero, .writefn = omap_wfi_write, },
+ /* TODO: Peripheral port remap register:
+ * On OMAP2 mcr p15, 0, rn, c15, c2, 4 sets up the interrupt controller
+ * base address at $rn & ~0xfff and map size of 0x200 << ($rn & 0xfff),
+ * when MMU is off.
+ */
+ { .name = "OMAP_CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY,
+ .opc1 = 0, .opc2 = CP_ANY, .access = PL1_W, .type = ARM_CP_OVERRIDE,
+ .writefn = omap_cachemaint_write },
+ { .name = "C9", .cp = 15, .crn = 9,
+ .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW,
+ .type = ARM_CP_CONST | ARM_CP_OVERRIDE, .resetvalue = 0 },
+ REGINFO_SENTINEL
+};
+
+static int xscale_cpar_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ value &= 0x3fff;
+ if (env->cp15.c15_cpar != value) {
+ /* Changes cp0 to cp13 behavior, so needs a TB flush. */
+ tb_flush(env);
+ env->cp15.c15_cpar = value;
+ }
+ return 0;
+}
+
+static const ARMCPRegInfo xscale_cp_reginfo[] = {
+ { .name = "XSCALE_CPAR",
+ .cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0, .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c15_cpar), .resetvalue = 0,
+ .writefn = xscale_cpar_write, },
+ { .name = "XSCALE_AUXCR",
+ .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 1, .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c1_xscaleauxcr),
+ .resetvalue = 0, },
+ REGINFO_SENTINEL
+};
+
+static const ARMCPRegInfo dummy_c15_cp_reginfo[] = {
+ /* RAZ/WI the whole crn=15 space, when we don't have a more specific
+ * implementation of this implementation-defined space.
+ * Ideally this should eventually disappear in favour of actually
+ * implementing the correct behaviour for all cores.
+ */
+ { .name = "C15_IMPDEF", .cp = 15, .crn = 15,
+ .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+ REGINFO_SENTINEL
+};
+
+static const ARMCPRegInfo cache_dirty_status_cp_reginfo[] = {
+ /* Cache status: RAZ because we have no cache so it's always clean */
+ { .name = "CDSR", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 6,
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ REGINFO_SENTINEL
+};
+
+static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = {
+ /* We never have a a block transfer operation in progress */
+ { .name = "BXSR", .cp = 15, .crn = 7, .crm = 12, .opc1 = 0, .opc2 = 4,
+ .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ /* The cache ops themselves: these all NOP for QEMU */
+ { .name = "IICR", .cp = 15, .crm = 5, .opc1 = 0,
+ .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+ { .name = "IDCR", .cp = 15, .crm = 6, .opc1 = 0,
+ .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+ { .name = "CDCR", .cp = 15, .crm = 12, .opc1 = 0,
+ .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+ { .name = "PIR", .cp = 15, .crm = 12, .opc1 = 1,
+ .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+ { .name = "PDR", .cp = 15, .crm = 12, .opc1 = 2,
+ .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+ { .name = "CIDCR", .cp = 15, .crm = 14, .opc1 = 0,
+ .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT },
+ REGINFO_SENTINEL
+};
+
+static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = {
+ /* The cache test-and-clean instructions always return (1 << 30)
+ * to indicate that there are no dirty cache lines.
+ */
+ { .name = "TC_DCACHE", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 3,
+ .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = (1 << 30) },
+ { .name = "TCI_DCACHE", .cp = 15, .crn = 7, .crm = 14, .opc1 = 0, .opc2 = 3,
+ .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = (1 << 30) },
+ REGINFO_SENTINEL
+};
+
+static const ARMCPRegInfo strongarm_cp_reginfo[] = {
+ /* Ignore ReadBuffer accesses */
+ { .name = "C9_READBUFFER", .cp = 15, .crn = 9,
+ .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
+ .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_OVERRIDE,
+ .resetvalue = 0 },
+ REGINFO_SENTINEL
+};
+
+static int mpidr_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ uint32_t mpidr = env->cpu_index;
+ /* We don't support setting cluster ID ([8..11])
+ * so these bits always RAZ.
+ */
+ if (arm_feature(env, ARM_FEATURE_V7MP)) {
+ mpidr |= (1 << 31);
+ /* Cores which are uniprocessor (non-coherent)
+ * but still implement the MP extensions set
+ * bit 30. (For instance, A9UP.) However we do
+ * not currently model any of those cores.
+ */
+ }
+ *value = mpidr;
+ return 0;
+}
+
+static const ARMCPRegInfo mpidr_cp_reginfo[] = {
+ { .name = "MPIDR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 5,
+ .access = PL1_R, .readfn = mpidr_read },
+ REGINFO_SENTINEL
+};
+
+static int sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
+{
+ env->cp15.c1_sys = value;
+ /* ??? Lots of these bits are not implemented. */
+ /* This may enable/disable the MMU, so do a TLB flush. */
+ tlb_flush(env, 1);
+ return 0;
+}
+
+void register_cp_regs_for_features(ARMCPU *cpu)
+{
+ /* Register all the coprocessor registers based on feature bits */
+ CPUARMState *env = &cpu->env;
+ if (arm_feature(env, ARM_FEATURE_M)) {
+ /* M profile has no coprocessor registers */
+ return;
+ }
+
+ define_arm_cp_regs(cpu, cp_reginfo);
+ if (arm_feature(env, ARM_FEATURE_V6)) {
+ /* The ID registers all have impdef reset values */
+ ARMCPRegInfo v6_idregs[] = {
+ { .name = "ID_PFR0", .cp = 15, .crn = 0, .crm = 1,
+ .opc1 = 0, .opc2 = 0, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->id_pfr0 },
+ { .name = "ID_PFR1", .cp = 15, .crn = 0, .crm = 1,
+ .opc1 = 0, .opc2 = 1, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->id_pfr1 },
+ { .name = "ID_DFR0", .cp = 15, .crn = 0, .crm = 1,
+ .opc1 = 0, .opc2 = 2, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->id_dfr0 },
+ { .name = "ID_AFR0", .cp = 15, .crn = 0, .crm = 1,
+ .opc1 = 0, .opc2 = 3, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->id_afr0 },
+ { .name = "ID_MMFR0", .cp = 15, .crn = 0, .crm = 1,
+ .opc1 = 0, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->id_mmfr0 },
+ { .name = "ID_MMFR1", .cp = 15, .crn = 0, .crm = 1,
+ .opc1 = 0, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->id_mmfr1 },
+ { .name = "ID_MMFR2", .cp = 15, .crn = 0, .crm = 1,
+ .opc1 = 0, .opc2 = 6, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->id_mmfr2 },
+ { .name = "ID_MMFR3", .cp = 15, .crn = 0, .crm = 1,
+ .opc1 = 0, .opc2 = 7, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->id_mmfr3 },
+ { .name = "ID_ISAR0", .cp = 15, .crn = 0, .crm = 2,
+ .opc1 = 0, .opc2 = 0, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->id_isar0 },
+ { .name = "ID_ISAR1", .cp = 15, .crn = 0, .crm = 2,
+ .opc1 = 0, .opc2 = 1, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->id_isar1 },
+ { .name = "ID_ISAR2", .cp = 15, .crn = 0, .crm = 2,
+ .opc1 = 0, .opc2 = 2, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->id_isar2 },
+ { .name = "ID_ISAR3", .cp = 15, .crn = 0, .crm = 2,
+ .opc1 = 0, .opc2 = 3, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->id_isar3 },
+ { .name = "ID_ISAR4", .cp = 15, .crn = 0, .crm = 2,
+ .opc1 = 0, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->id_isar4 },
+ { .name = "ID_ISAR5", .cp = 15, .crn = 0, .crm = 2,
+ .opc1 = 0, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->id_isar5 },
+ /* 6..7 are as yet unallocated and must RAZ */
+ { .name = "ID_ISAR6", .cp = 15, .crn = 0, .crm = 2,
+ .opc1 = 0, .opc2 = 6, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = 0 },
+ { .name = "ID_ISAR7", .cp = 15, .crn = 0, .crm = 2,
+ .opc1 = 0, .opc2 = 7, .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = 0 },
+ REGINFO_SENTINEL
+ };
+ define_arm_cp_regs(cpu, v6_idregs);
+ define_arm_cp_regs(cpu, v6_cp_reginfo);
+ } else {
+ define_arm_cp_regs(cpu, not_v6_cp_reginfo);
+ }
+ if (arm_feature(env, ARM_FEATURE_V6K)) {
+ define_arm_cp_regs(cpu, v6k_cp_reginfo);
+ }
+ if (arm_feature(env, ARM_FEATURE_V7)) {
+ /* v7 performance monitor control register: same implementor
+ * field as main ID register, and we implement no event counters.
+ */
+ ARMCPRegInfo pmcr = {
+ .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0,
+ .access = PL0_RW, .resetvalue = cpu->midr & 0xff000000,
+ .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr),
+ .readfn = pmreg_read, .writefn = pmcr_write
+ };
+ ARMCPRegInfo clidr = {
+ .name = "CLIDR", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 1,
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = cpu->clidr
+ };
+ define_one_arm_cp_reg(cpu, &pmcr);
+ define_one_arm_cp_reg(cpu, &clidr);
+ define_arm_cp_regs(cpu, v7_cp_reginfo);
+ } else {
+ define_arm_cp_regs(cpu, not_v7_cp_reginfo);
+ }
+ if (arm_feature(env, ARM_FEATURE_MPU)) {
+ /* These are the MPU registers prior to PMSAv6. Any new
+ * PMSA core later than the ARM946 will require that we
+ * implement the PMSAv6 or PMSAv7 registers, which are
+ * completely different.
+ */
+ assert(!arm_feature(env, ARM_FEATURE_V6));
+ define_arm_cp_regs(cpu, pmsav5_cp_reginfo);
+ } else {
+ define_arm_cp_regs(cpu, vmsa_cp_reginfo);
+ }
+ if (arm_feature(env, ARM_FEATURE_THUMB2EE)) {
+ define_arm_cp_regs(cpu, t2ee_cp_reginfo);
+ }
+ if (arm_feature(env, ARM_FEATURE_GENERIC_TIMER)) {
+ define_arm_cp_regs(cpu, generic_timer_cp_reginfo);
+ }
+ if (arm_feature(env, ARM_FEATURE_VAPA)) {
+ define_arm_cp_regs(cpu, vapa_cp_reginfo);
+ }
+ if (arm_feature(env, ARM_FEATURE_CACHE_TEST_CLEAN)) {
+ define_arm_cp_regs(cpu, cache_test_clean_cp_reginfo);
+ }
+ if (arm_feature(env, ARM_FEATURE_CACHE_DIRTY_REG)) {
+ define_arm_cp_regs(cpu, cache_dirty_status_cp_reginfo);
+ }
+ if (arm_feature(env, ARM_FEATURE_CACHE_BLOCK_OPS)) {
+ define_arm_cp_regs(cpu, cache_block_ops_cp_reginfo);
+ }
+ if (arm_feature(env, ARM_FEATURE_OMAPCP)) {
+ define_arm_cp_regs(cpu, omap_cp_reginfo);
+ }
+ if (arm_feature(env, ARM_FEATURE_STRONGARM)) {
+ define_arm_cp_regs(cpu, strongarm_cp_reginfo);
+ }
+ if (arm_feature(env, ARM_FEATURE_XSCALE)) {
+ define_arm_cp_regs(cpu, xscale_cp_reginfo);
+ }
+ if (arm_feature(env, ARM_FEATURE_DUMMY_C15_REGS)) {
+ define_arm_cp_regs(cpu, dummy_c15_cp_reginfo);
+ }
+ if (arm_feature(env, ARM_FEATURE_MPIDR)) {
+ define_arm_cp_regs(cpu, mpidr_cp_reginfo);
+ }
+ /* Slightly awkwardly, the OMAP and StrongARM cores need all of
+ * cp15 crn=0 to be writes-ignored, whereas for other cores they should
+ * be read-only (ie write causes UNDEF exception).
+ */
+ {
+ ARMCPRegInfo id_cp_reginfo[] = {
+ /* Note that the MIDR isn't a simple constant register because
+ * of the TI925 behaviour where writes to another register can
+ * cause the MIDR value to change.
+ */
+ { .name = "MIDR",
+ .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_R, .resetvalue = cpu->midr,
+ .writefn = arm_cp_write_ignore,
+ .fieldoffset = offsetof(CPUARMState, cp15.c0_cpuid) },
+ { .name = "CTR",
+ .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = cpu->ctr },
+ { .name = "TCMTR",
+ .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 2,
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ { .name = "TLBTR",
+ .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 3,
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ /* crn = 0 op1 = 0 crm = 3..7 : currently unassigned; we RAZ. */
+ { .name = "DUMMY",
+ .cp = 15, .crn = 0, .crm = 3, .opc1 = 0, .opc2 = CP_ANY,
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ { .name = "DUMMY",
+ .cp = 15, .crn = 0, .crm = 4, .opc1 = 0, .opc2 = CP_ANY,
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ { .name = "DUMMY",
+ .cp = 15, .crn = 0, .crm = 5, .opc1 = 0, .opc2 = CP_ANY,
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ { .name = "DUMMY",
+ .cp = 15, .crn = 0, .crm = 6, .opc1 = 0, .opc2 = CP_ANY,
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ { .name = "DUMMY",
+ .cp = 15, .crn = 0, .crm = 7, .opc1 = 0, .opc2 = CP_ANY,
+ .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 },
+ REGINFO_SENTINEL
+ };
+ ARMCPRegInfo crn0_wi_reginfo = {
+ .name = "CRN0_WI", .cp = 15, .crn = 0, .crm = CP_ANY,
+ .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_W,
+ .type = ARM_CP_NOP | ARM_CP_OVERRIDE
+ };
+ if (arm_feature(env, ARM_FEATURE_OMAPCP) ||
+ arm_feature(env, ARM_FEATURE_STRONGARM)) {
+ ARMCPRegInfo *r;
+ /* Register the blanket "writes ignored" value first to cover the
+ * whole space. Then define the specific ID registers, but update
+ * their access field to allow write access, so that they ignore
+ * writes rather than causing them to UNDEF.
+ */
+ define_one_arm_cp_reg(cpu, &crn0_wi_reginfo);
+ for (r = id_cp_reginfo; r->type != ARM_CP_SENTINEL; r++) {
+ r->access = PL1_RW;
+ define_one_arm_cp_reg(cpu, r);
+ }
+ } else {
+ /* Just register the standard ID registers (read-only, meaning
+ * that writes will UNDEF).
+ */
+ define_arm_cp_regs(cpu, id_cp_reginfo);
+ }
+ }
+
+ if (arm_feature(env, ARM_FEATURE_AUXCR)) {
+ ARMCPRegInfo auxcr = {
+ .name = "AUXCR", .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW, .type = ARM_CP_CONST,
+ .resetvalue = cpu->reset_auxcr
+ };
+ define_one_arm_cp_reg(cpu, &auxcr);
+ }
+
+ /* Generic registers whose values depend on the implementation */
+ {
+ ARMCPRegInfo sctlr = {
+ .name = "SCTLR", .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_sys),
+ .writefn = sctlr_write, .resetvalue = cpu->reset_sctlr
+ };
+ if (arm_feature(env, ARM_FEATURE_XSCALE)) {
+ /* Normally we would always end the TB on an SCTLR write, but Linux
+ * arch/arm/mach-pxa/sleep.S expects two instructions following
+ * an MMU enable to execute from cache. Imitate this behaviour.
+ */
+ sctlr.type |= ARM_CP_SUPPRESS_TB_END;
+ }
+ define_one_arm_cp_reg(cpu, &sctlr);
+ }
+}
+
ARMCPU *cpu_arm_init(const char *cpu_model)
{
ARMCPU *cpu;
@@ -137,6 +1192,107 @@ void arm_cpu_list(FILE *f, fprintf_function cpu_fprintf)
g_slist_free(list);
}
+void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu,
+ const ARMCPRegInfo *r, void *opaque)
+{
+ /* Define implementations of coprocessor registers.
+ * We store these in a hashtable because typically
+ * there are less than 150 registers in a space which
+ * is 16*16*16*8*8 = 262144 in size.
+ * Wildcarding is supported for the crm, opc1 and opc2 fields.
+ * If a register is defined twice then the second definition is
+ * used, so this can be used to define some generic registers and
+ * then override them with implementation specific variations.
+ * At least one of the original and the second definition should
+ * include ARM_CP_OVERRIDE in its type bits -- this is just a guard
+ * against accidental use.
+ */
+ int crm, opc1, opc2;
+ int crmmin = (r->crm == CP_ANY) ? 0 : r->crm;
+ int crmmax = (r->crm == CP_ANY) ? 15 : r->crm;
+ int opc1min = (r->opc1 == CP_ANY) ? 0 : r->opc1;
+ int opc1max = (r->opc1 == CP_ANY) ? 7 : r->opc1;
+ int opc2min = (r->opc2 == CP_ANY) ? 0 : r->opc2;
+ int opc2max = (r->opc2 == CP_ANY) ? 7 : r->opc2;
+ /* 64 bit registers have only CRm and Opc1 fields */
+ assert(!((r->type & ARM_CP_64BIT) && (r->opc2 || r->crn)));
+ /* Check that the register definition has enough info to handle
+ * reads and writes if they are permitted.
+ */
+ if (!(r->type & (ARM_CP_SPECIAL|ARM_CP_CONST))) {
+ if (r->access & PL3_R) {
+ assert(r->fieldoffset || r->readfn);
+ }
+ if (r->access & PL3_W) {
+ assert(r->fieldoffset || r->writefn);
+ }
+ }
+ /* Bad type field probably means missing sentinel at end of reg list */
+ assert(cptype_valid(r->type));
+ for (crm = crmmin; crm <= crmmax; crm++) {
+ for (opc1 = opc1min; opc1 <= opc1max; opc1++) {
+ for (opc2 = opc2min; opc2 <= opc2max; opc2++) {
+ uint32_t *key = g_new(uint32_t, 1);
+ ARMCPRegInfo *r2 = g_memdup(r, sizeof(ARMCPRegInfo));
+ int is64 = (r->type & ARM_CP_64BIT) ? 1 : 0;
+ *key = ENCODE_CP_REG(r->cp, is64, r->crn, crm, opc1, opc2);
+ r2->opaque = opaque;
+ /* Make sure reginfo passed to helpers for wildcarded regs
+ * has the correct crm/opc1/opc2 for this reg, not CP_ANY:
+ */
+ r2->crm = crm;
+ r2->opc1 = opc1;
+ r2->opc2 = opc2;
+ /* Overriding of an existing definition must be explicitly
+ * requested.
+ */
+ if (!(r->type & ARM_CP_OVERRIDE)) {
+ ARMCPRegInfo *oldreg;
+ oldreg = g_hash_table_lookup(cpu->cp_regs, key);
+ if (oldreg && !(oldreg->type & ARM_CP_OVERRIDE)) {
+ fprintf(stderr, "Register redefined: cp=%d %d bit "
+ "crn=%d crm=%d opc1=%d opc2=%d, "
+ "was %s, now %s\n", r2->cp, 32 + 32 * is64,
+ r2->crn, r2->crm, r2->opc1, r2->opc2,
+ oldreg->name, r2->name);
+ assert(0);
+ }
+ }
+ g_hash_table_insert(cpu->cp_regs, key, r2);
+ }
+ }
+ }
+}
+
+void define_arm_cp_regs_with_opaque(ARMCPU *cpu,
+ const ARMCPRegInfo *regs, void *opaque)
+{
+ /* Define a whole list of registers */
+ const ARMCPRegInfo *r;
+ for (r = regs; r->type != ARM_CP_SENTINEL; r++) {
+ define_one_arm_cp_reg_with_opaque(cpu, r, opaque);
+ }
+}
+
+const ARMCPRegInfo *get_arm_cp_reginfo(ARMCPU *cpu, uint32_t encoded_cp)
+{
+ return g_hash_table_lookup(cpu->cp_regs, &encoded_cp);
+}
+
+int arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ /* Helper coprocessor write function for write-ignore registers */
+ return 0;
+}
+
+int arm_cp_read_zero(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t *value)
+{
+ /* Helper coprocessor write function for read-as-zero registers */
+ *value = 0;
+ return 0;
+}
+
static int bad_mode_switch(CPUARMState *env, int mode)
{
/* Return true if it is not valid for us to switch to
@@ -286,31 +1442,6 @@ int cpu_arm_handle_mmu_fault (CPUARMState *env, target_ulong address, int rw,
}
/* These should probably raise undefined insn exceptions. */
-void HELPER(set_cp)(CPUARMState *env, uint32_t insn, uint32_t val)
-{
- int op1 = (insn >> 8) & 0xf;
- cpu_abort(env, "cp%i insn %08x\n", op1, insn);
- return;
-}
-
-uint32_t HELPER(get_cp)(CPUARMState *env, uint32_t insn)
-{
- int op1 = (insn >> 8) & 0xf;
- cpu_abort(env, "cp%i insn %08x\n", op1, insn);
- return 0;
-}
-
-void HELPER(set_cp15)(CPUARMState *env, uint32_t insn, uint32_t val)
-{
- cpu_abort(env, "cp15 insn %08x\n", insn);
-}
-
-uint32_t HELPER(get_cp15)(CPUARMState *env, uint32_t insn)
-{
- cpu_abort(env, "cp15 insn %08x\n", insn);
-}
-
-/* These should probably raise undefined insn exceptions. */
void HELPER(v7m_msr)(CPUARMState *env, uint32_t reg, uint32_t val)
{
cpu_abort(env, "v7m_mrs %d\n", reg);
@@ -1036,872 +2167,6 @@ target_phys_addr_t cpu_get_phys_page_debug(CPUARMState *env, target_ulong addr)
return phys_addr;
}
-void HELPER(set_cp)(CPUARMState *env, uint32_t insn, uint32_t val)
-{
- int cp_num = (insn >> 8) & 0xf;
- int cp_info = (insn >> 5) & 7;
- int src = (insn >> 16) & 0xf;
- int operand = insn & 0xf;
-
- if (env->cp[cp_num].cp_write)
- env->cp[cp_num].cp_write(env->cp[cp_num].opaque,
- cp_info, src, operand, val);
-}
-
-uint32_t HELPER(get_cp)(CPUARMState *env, uint32_t insn)
-{
- int cp_num = (insn >> 8) & 0xf;
- int cp_info = (insn >> 5) & 7;
- int dest = (insn >> 16) & 0xf;
- int operand = insn & 0xf;
-
- if (env->cp[cp_num].cp_read)
- return env->cp[cp_num].cp_read(env->cp[cp_num].opaque,
- cp_info, dest, operand);
- return 0;
-}
-
-/* Return basic MPU access permission bits. */
-static uint32_t simple_mpu_ap_bits(uint32_t val)
-{
- uint32_t ret;
- uint32_t mask;
- int i;
- ret = 0;
- mask = 3;
- for (i = 0; i < 16; i += 2) {
- ret |= (val >> i) & mask;
- mask <<= 2;
- }
- return ret;
-}
-
-/* Pad basic MPU access permission bits to extended format. */
-static uint32_t extended_mpu_ap_bits(uint32_t val)
-{
- uint32_t ret;
- uint32_t mask;
- int i;
- ret = 0;
- mask = 3;
- for (i = 0; i < 16; i += 2) {
- ret |= (val & mask) << i;
- mask <<= 2;
- }
- return ret;
-}
-
-void HELPER(set_cp15)(CPUARMState *env, uint32_t insn, uint32_t val)
-{
- int op1;
- int op2;
- int crm;
-
- op1 = (insn >> 21) & 7;
- op2 = (insn >> 5) & 7;
- crm = insn & 0xf;
- switch ((insn >> 16) & 0xf) {
- case 0:
- /* ID codes. */
- if (arm_feature(env, ARM_FEATURE_XSCALE))
- break;
- if (arm_feature(env, ARM_FEATURE_OMAPCP))
- break;
- if (arm_feature(env, ARM_FEATURE_V7)
- && op1 == 2 && crm == 0 && op2 == 0) {
- env->cp15.c0_cssel = val & 0xf;
- break;
- }
- goto bad_reg;
- case 1: /* System configuration. */
- if (arm_feature(env, ARM_FEATURE_V7)
- && op1 == 0 && crm == 1 && op2 == 0) {
- env->cp15.c1_scr = val;
- break;
- }
- if (arm_feature(env, ARM_FEATURE_OMAPCP))
- op2 = 0;
- switch (op2) {
- case 0:
- if (!arm_feature(env, ARM_FEATURE_XSCALE) || crm == 0)
- env->cp15.c1_sys = val;
- /* ??? Lots of these bits are not implemented. */
- /* This may enable/disable the MMU, so do a TLB flush. */
- tlb_flush(env, 1);
- break;
- case 1: /* Auxiliary control register. */
- if (arm_feature(env, ARM_FEATURE_XSCALE)) {
- env->cp15.c1_xscaleauxcr = val;
- break;
- }
- /* Not implemented. */
- break;
- case 2:
- if (arm_feature(env, ARM_FEATURE_XSCALE))
- goto bad_reg;
- if (env->cp15.c1_coproc != val) {
- env->cp15.c1_coproc = val;
- /* ??? Is this safe when called from within a TB? */
- tb_flush(env);
- }
- break;
- default:
- goto bad_reg;
- }
- break;
- case 2: /* MMU Page table control / MPU cache control. */
- if (arm_feature(env, ARM_FEATURE_MPU)) {
- switch (op2) {
- case 0:
- env->cp15.c2_data = val;
- break;
- case 1:
- env->cp15.c2_insn = val;
- break;
- default:
- goto bad_reg;
- }
- } else {
- switch (op2) {
- case 0:
- env->cp15.c2_base0 = val;
- break;
- case 1:
- env->cp15.c2_base1 = val;
- break;
- case 2:
- val &= 7;
- env->cp15.c2_control = val;
- env->cp15.c2_mask = ~(((uint32_t)0xffffffffu) >> val);
- env->cp15.c2_base_mask = ~((uint32_t)0x3fffu >> val);
- break;
- default:
- goto bad_reg;
- }
- }
- break;
- case 3: /* MMU Domain access control / MPU write buffer control. */
- env->cp15.c3 = val;
- tlb_flush(env, 1); /* Flush TLB as domain not tracked in TLB */
- break;
- case 4: /* Reserved. */
- goto bad_reg;
- case 5: /* MMU Fault status / MPU access permission. */
- if (arm_feature(env, ARM_FEATURE_OMAPCP))
- op2 = 0;
- switch (op2) {
- case 0:
- if (arm_feature(env, ARM_FEATURE_MPU))
- val = extended_mpu_ap_bits(val);
- env->cp15.c5_data = val;
- break;
- case 1:
- if (arm_feature(env, ARM_FEATURE_MPU))
- val = extended_mpu_ap_bits(val);
- env->cp15.c5_insn = val;
- break;
- case 2:
- if (!arm_feature(env, ARM_FEATURE_MPU))
- goto bad_reg;
- env->cp15.c5_data = val;
- break;
- case 3:
- if (!arm_feature(env, ARM_FEATURE_MPU))
- goto bad_reg;
- env->cp15.c5_insn = val;
- break;
- default:
- goto bad_reg;
- }
- break;
- case 6: /* MMU Fault address / MPU base/size. */
- if (arm_feature(env, ARM_FEATURE_MPU)) {
- if (crm >= 8)
- goto bad_reg;
- env->cp15.c6_region[crm] = val;
- } else {
- if (arm_feature(env, ARM_FEATURE_OMAPCP))
- op2 = 0;
- switch (op2) {
- case 0:
- env->cp15.c6_data = val;
- break;
- case 1: /* ??? This is WFAR on armv6 */
- case 2:
- env->cp15.c6_insn = val;
- break;
- default:
- goto bad_reg;
- }
- }
- break;
- case 7: /* Cache control. */
- env->cp15.c15_i_max = 0x000;
- env->cp15.c15_i_min = 0xff0;
- if (op1 != 0) {
- goto bad_reg;
- }
- /* No cache, so nothing to do except VA->PA translations. */
- if (arm_feature(env, ARM_FEATURE_VAPA)) {
- switch (crm) {
- case 4:
- if (arm_feature(env, ARM_FEATURE_V7)) {
- env->cp15.c7_par = val & 0xfffff6ff;
- } else {
- env->cp15.c7_par = val & 0xfffff1ff;
- }
- break;
- case 8: {
- uint32_t phys_addr;
- target_ulong page_size;
- int prot;
- int ret, is_user = op2 & 2;
- int access_type = op2 & 1;
-
- if (op2 & 4) {
- /* Other states are only available with TrustZone */
- goto bad_reg;
- }
- ret = get_phys_addr(env, val, access_type, is_user,
- &phys_addr, &prot, &page_size);
- if (ret == 0) {
- /* We do not set any attribute bits in the PAR */
- if (page_size == (1 << 24)
- && arm_feature(env, ARM_FEATURE_V7)) {
- env->cp15.c7_par = (phys_addr & 0xff000000) | 1 << 1;
- } else {
- env->cp15.c7_par = phys_addr & 0xfffff000;
- }
- } else {
- env->cp15.c7_par = ((ret & (10 << 1)) >> 5) |
- ((ret & (12 << 1)) >> 6) |
- ((ret & 0xf) << 1) | 1;
- }
- break;
- }
- }
- }
- break;
- case 8: /* MMU TLB control. */
- switch (op2) {
- case 0: /* Invalidate all (TLBIALL) */
- tlb_flush(env, 1);
- break;
- case 1: /* Invalidate single TLB entry by MVA and ASID (TLBIMVA) */
- tlb_flush_page(env, val & TARGET_PAGE_MASK);
- break;
- case 2: /* Invalidate by ASID (TLBIASID) */
- tlb_flush(env, val == 0);
- break;
- case 3: /* Invalidate single entry by MVA, all ASIDs (TLBIMVAA) */
- tlb_flush_page(env, val & TARGET_PAGE_MASK);
- break;
- default:
- goto bad_reg;
- }
- break;
- case 9:
- if (arm_feature(env, ARM_FEATURE_OMAPCP))
- break;
- if (arm_feature(env, ARM_FEATURE_STRONGARM))
- break; /* Ignore ReadBuffer access */
- switch (crm) {
- case 0: /* Cache lockdown. */
- switch (op1) {
- case 0: /* L1 cache. */
- switch (op2) {
- case 0:
- env->cp15.c9_data = val;
- break;
- case 1:
- env->cp15.c9_insn = val;
- break;
- default:
- goto bad_reg;
- }
- break;
- case 1: /* L2 cache. */
- /* Ignore writes to L2 lockdown/auxiliary registers. */
- break;
- default:
- goto bad_reg;
- }
- break;
- case 1: /* TCM memory region registers. */
- /* Not implemented. */
- goto bad_reg;
- case 12: /* Performance monitor control */
- /* Performance monitors are implementation defined in v7,
- * but with an ARM recommended set of registers, which we
- * follow (although we don't actually implement any counters)
- */
- if (!arm_feature(env, ARM_FEATURE_V7)) {
- goto bad_reg;
- }
- switch (op2) {
- case 0: /* performance monitor control register */
- /* only the DP, X, D and E bits are writable */
- env->cp15.c9_pmcr &= ~0x39;
- env->cp15.c9_pmcr |= (val & 0x39);
- break;
- case 1: /* Count enable set register */
- val &= (1 << 31);
- env->cp15.c9_pmcnten |= val;
- break;
- case 2: /* Count enable clear */
- val &= (1 << 31);
- env->cp15.c9_pmcnten &= ~val;
- break;
- case 3: /* Overflow flag status */
- env->cp15.c9_pmovsr &= ~val;
- break;
- case 4: /* Software increment */
- /* RAZ/WI since we don't implement the software-count event */
- break;
- case 5: /* Event counter selection register */
- /* Since we don't implement any events, writing to this register
- * is actually UNPREDICTABLE. So we choose to RAZ/WI.
- */
- break;
- default:
- goto bad_reg;
- }
- break;
- case 13: /* Performance counters */
- if (!arm_feature(env, ARM_FEATURE_V7)) {
- goto bad_reg;
- }
- switch (op2) {
- case 0: /* Cycle count register: not implemented, so RAZ/WI */
- break;
- case 1: /* Event type select */
- env->cp15.c9_pmxevtyper = val & 0xff;
- break;
- case 2: /* Event count register */
- /* Unimplemented (we have no events), RAZ/WI */
- break;
- default:
- goto bad_reg;
- }
- break;
- case 14: /* Performance monitor control */
- if (!arm_feature(env, ARM_FEATURE_V7)) {
- goto bad_reg;
- }
- switch (op2) {
- case 0: /* user enable */
- env->cp15.c9_pmuserenr = val & 1;
- /* changes access rights for cp registers, so flush tbs */
- tb_flush(env);
- break;
- case 1: /* interrupt enable set */
- /* We have no event counters so only the C bit can be changed */
- val &= (1 << 31);
- env->cp15.c9_pminten |= val;
- break;
- case 2: /* interrupt enable clear */
- val &= (1 << 31);
- env->cp15.c9_pminten &= ~val;
- break;
- }
- break;
- default:
- goto bad_reg;
- }
- break;
- case 10: /* MMU TLB lockdown. */
- /* ??? TLB lockdown not implemented. */
- break;
- case 12: /* Reserved. */
- goto bad_reg;
- case 13: /* Process ID. */
- switch (op2) {
- case 0:
- /* Unlike real hardware the qemu TLB uses virtual addresses,
- not modified virtual addresses, so this causes a TLB flush.
- */
- if (env->cp15.c13_fcse != val)
- tlb_flush(env, 1);
- env->cp15.c13_fcse = val;
- break;
- case 1:
- /* This changes the ASID, so do a TLB flush. */
- if (env->cp15.c13_context != val
- && !arm_feature(env, ARM_FEATURE_MPU))
- tlb_flush(env, 0);
- env->cp15.c13_context = val;
- break;
- default:
- goto bad_reg;
- }
- break;
- case 14: /* Generic timer */
- if (arm_feature(env, ARM_FEATURE_GENERIC_TIMER)) {
- /* Dummy implementation: RAZ/WI for all */
- break;
- }
- goto bad_reg;
- case 15: /* Implementation specific. */
- if (arm_feature(env, ARM_FEATURE_XSCALE)) {
- if (op2 == 0 && crm == 1) {
- if (env->cp15.c15_cpar != (val & 0x3fff)) {
- /* Changes cp0 to cp13 behavior, so needs a TB flush. */
- tb_flush(env);
- env->cp15.c15_cpar = val & 0x3fff;
- }
- break;
- }
- goto bad_reg;
- }
- if (arm_feature(env, ARM_FEATURE_OMAPCP)) {
- switch (crm) {
- case 0:
- break;
- case 1: /* Set TI925T configuration. */
- env->cp15.c15_ticonfig = val & 0xe7;
- env->cp15.c0_cpuid = (val & (1 << 5)) ? /* OS_TYPE bit */
- ARM_CPUID_TI915T : ARM_CPUID_TI925T;
- break;
- case 2: /* Set I_max. */
- env->cp15.c15_i_max = val;
- break;
- case 3: /* Set I_min. */
- env->cp15.c15_i_min = val;
- break;
- case 4: /* Set thread-ID. */
- env->cp15.c15_threadid = val & 0xffff;
- break;
- case 8: /* Wait-for-interrupt (deprecated). */
- cpu_interrupt(env, CPU_INTERRUPT_HALT);
- break;
- default:
- goto bad_reg;
- }
- }
- if (ARM_CPUID(env) == ARM_CPUID_CORTEXA9) {
- switch (crm) {
- case 0:
- if ((op1 == 0) && (op2 == 0)) {
- env->cp15.c15_power_control = val;
- } else if ((op1 == 0) && (op2 == 1)) {
- env->cp15.c15_diagnostic = val;
- } else if ((op1 == 0) && (op2 == 2)) {
- env->cp15.c15_power_diagnostic = val;
- }
- default:
- break;
- }
- }
- break;
- }
- return;
-bad_reg:
- /* ??? For debugging only. Should raise illegal instruction exception. */
- cpu_abort(env, "Unimplemented cp15 register write (c%d, c%d, {%d, %d})\n",
- (insn >> 16) & 0xf, crm, op1, op2);
-}
-
-uint32_t HELPER(get_cp15)(CPUARMState *env, uint32_t insn)
-{
- int op1;
- int op2;
- int crm;
-
- op1 = (insn >> 21) & 7;
- op2 = (insn >> 5) & 7;
- crm = insn & 0xf;
- switch ((insn >> 16) & 0xf) {
- case 0: /* ID codes. */
- switch (op1) {
- case 0:
- switch (crm) {
- case 0:
- switch (op2) {
- case 0: /* Device ID. */
- return env->cp15.c0_cpuid;
- case 1: /* Cache Type. */
- return env->cp15.c0_cachetype;
- case 2: /* TCM status. */
- return 0;
- case 3: /* TLB type register. */
- return 0; /* No lockable TLB entries. */
- case 5: /* MPIDR */
- /* The MPIDR was standardised in v7; prior to
- * this it was implemented only in the 11MPCore.
- * For all other pre-v7 cores it does not exist.
- */
- if (arm_feature(env, ARM_FEATURE_V7) ||
- ARM_CPUID(env) == ARM_CPUID_ARM11MPCORE) {
- int mpidr = env->cpu_index;
- /* We don't support setting cluster ID ([8..11])
- * so these bits always RAZ.
- */
- if (arm_feature(env, ARM_FEATURE_V7MP)) {
- mpidr |= (1 << 31);
- /* Cores which are uniprocessor (non-coherent)
- * but still implement the MP extensions set
- * bit 30. (For instance, A9UP.) However we do
- * not currently model any of those cores.
- */
- }
- return mpidr;
- }
- /* otherwise fall through to the unimplemented-reg case */
- default:
- goto bad_reg;
- }
- case 1:
- if (!arm_feature(env, ARM_FEATURE_V6))
- goto bad_reg;
- return env->cp15.c0_c1[op2];
- case 2:
- if (!arm_feature(env, ARM_FEATURE_V6))
- goto bad_reg;
- return env->cp15.c0_c2[op2];
- case 3: case 4: case 5: case 6: case 7:
- return 0;
- default:
- goto bad_reg;
- }
- case 1:
- /* These registers aren't documented on arm11 cores. However
- Linux looks at them anyway. */
- if (!arm_feature(env, ARM_FEATURE_V6))
- goto bad_reg;
- if (crm != 0)
- goto bad_reg;
- if (!arm_feature(env, ARM_FEATURE_V7))
- return 0;
-
- switch (op2) {
- case 0:
- return env->cp15.c0_ccsid[env->cp15.c0_cssel];
- case 1:
- return env->cp15.c0_clid;
- case 7:
- return 0;
- }
- goto bad_reg;
- case 2:
- if (op2 != 0 || crm != 0)
- goto bad_reg;
- return env->cp15.c0_cssel;
- default:
- goto bad_reg;
- }
- case 1: /* System configuration. */
- if (arm_feature(env, ARM_FEATURE_V7)
- && op1 == 0 && crm == 1 && op2 == 0) {
- return env->cp15.c1_scr;
- }
- if (arm_feature(env, ARM_FEATURE_OMAPCP))
- op2 = 0;
- switch (op2) {
- case 0: /* Control register. */
- return env->cp15.c1_sys;
- case 1: /* Auxiliary control register. */
- if (arm_feature(env, ARM_FEATURE_XSCALE))
- return env->cp15.c1_xscaleauxcr;
- if (!arm_feature(env, ARM_FEATURE_AUXCR))
- goto bad_reg;
- switch (ARM_CPUID(env)) {
- case ARM_CPUID_ARM1026:
- return 1;
- case ARM_CPUID_ARM1136:
- case ARM_CPUID_ARM1136_R2:
- case ARM_CPUID_ARM1176:
- return 7;
- case ARM_CPUID_ARM11MPCORE:
- return 1;
- case ARM_CPUID_CORTEXA8:
- return 2;
- case ARM_CPUID_CORTEXA9:
- case ARM_CPUID_CORTEXA15:
- return 0;
- default:
- goto bad_reg;
- }
- case 2: /* Coprocessor access register. */
- if (arm_feature(env, ARM_FEATURE_XSCALE))
- goto bad_reg;
- return env->cp15.c1_coproc;
- default:
- goto bad_reg;
- }
- case 2: /* MMU Page table control / MPU cache control. */
- if (arm_feature(env, ARM_FEATURE_MPU)) {
- switch (op2) {
- case 0:
- return env->cp15.c2_data;
- break;
- case 1:
- return env->cp15.c2_insn;
- break;
- default:
- goto bad_reg;
- }
- } else {
- switch (op2) {
- case 0:
- return env->cp15.c2_base0;
- case 1:
- return env->cp15.c2_base1;
- case 2:
- return env->cp15.c2_control;
- default:
- goto bad_reg;
- }
- }
- case 3: /* MMU Domain access control / MPU write buffer control. */
- return env->cp15.c3;
- case 4: /* Reserved. */
- goto bad_reg;
- case 5: /* MMU Fault status / MPU access permission. */
- if (arm_feature(env, ARM_FEATURE_OMAPCP))
- op2 = 0;
- switch (op2) {
- case 0:
- if (arm_feature(env, ARM_FEATURE_MPU))
- return simple_mpu_ap_bits(env->cp15.c5_data);
- return env->cp15.c5_data;
- case 1:
- if (arm_feature(env, ARM_FEATURE_MPU))
- return simple_mpu_ap_bits(env->cp15.c5_insn);
- return env->cp15.c5_insn;
- case 2:
- if (!arm_feature(env, ARM_FEATURE_MPU))
- goto bad_reg;
- return env->cp15.c5_data;
- case 3:
- if (!arm_feature(env, ARM_FEATURE_MPU))
- goto bad_reg;
- return env->cp15.c5_insn;
- default:
- goto bad_reg;
- }
- case 6: /* MMU Fault address. */
- if (arm_feature(env, ARM_FEATURE_MPU)) {
- if (crm >= 8)
- goto bad_reg;
- return env->cp15.c6_region[crm];
- } else {
- if (arm_feature(env, ARM_FEATURE_OMAPCP))
- op2 = 0;
- switch (op2) {
- case 0:
- return env->cp15.c6_data;
- case 1:
- if (arm_feature(env, ARM_FEATURE_V6)) {
- /* Watchpoint Fault Adrress. */
- return 0; /* Not implemented. */
- } else {
- /* Instruction Fault Adrress. */
- /* Arm9 doesn't have an IFAR, but implementing it anyway
- shouldn't do any harm. */
- return env->cp15.c6_insn;
- }
- case 2:
- if (arm_feature(env, ARM_FEATURE_V6)) {
- /* Instruction Fault Adrress. */
- return env->cp15.c6_insn;
- } else {
- goto bad_reg;
- }
- default:
- goto bad_reg;
- }
- }
- case 7: /* Cache control. */
- if (crm == 4 && op1 == 0 && op2 == 0) {
- return env->cp15.c7_par;
- }
- /* FIXME: Should only clear Z flag if destination is r15. */
- env->ZF = 0;
- return 0;
- case 8: /* MMU TLB control. */
- goto bad_reg;
- case 9:
- switch (crm) {
- case 0: /* Cache lockdown */
- switch (op1) {
- case 0: /* L1 cache. */
- if (arm_feature(env, ARM_FEATURE_OMAPCP)) {
- return 0;
- }
- switch (op2) {
- case 0:
- return env->cp15.c9_data;
- case 1:
- return env->cp15.c9_insn;
- default:
- goto bad_reg;
- }
- case 1: /* L2 cache */
- /* L2 Lockdown and Auxiliary control. */
- switch (op2) {
- case 0:
- /* L2 cache lockdown (A8 only) */
- return 0;
- case 2:
- /* L2 cache auxiliary control (A8) or control (A15) */
- if (ARM_CPUID(env) == ARM_CPUID_CORTEXA15) {
- /* Linux wants the number of processors from here.
- * Might as well set the interrupt-controller bit too.
- */
- return ((smp_cpus - 1) << 24) | (1 << 23);
- }
- return 0;
- case 3:
- /* L2 cache extended control (A15) */
- return 0;
- default:
- goto bad_reg;
- }
- default:
- goto bad_reg;
- }
- break;
- case 12: /* Performance monitor control */
- if (!arm_feature(env, ARM_FEATURE_V7)) {
- goto bad_reg;
- }
- switch (op2) {
- case 0: /* performance monitor control register */
- return env->cp15.c9_pmcr;
- case 1: /* count enable set */
- case 2: /* count enable clear */
- return env->cp15.c9_pmcnten;
- case 3: /* overflow flag status */
- return env->cp15.c9_pmovsr;
- case 4: /* software increment */
- case 5: /* event counter selection register */
- return 0; /* Unimplemented, RAZ/WI */
- default:
- goto bad_reg;
- }
- case 13: /* Performance counters */
- if (!arm_feature(env, ARM_FEATURE_V7)) {
- goto bad_reg;
- }
- switch (op2) {
- case 1: /* Event type select */
- return env->cp15.c9_pmxevtyper;
- case 0: /* Cycle count register */
- case 2: /* Event count register */
- /* Unimplemented, so RAZ/WI */
- return 0;
- default:
- goto bad_reg;
- }
- case 14: /* Performance monitor control */
- if (!arm_feature(env, ARM_FEATURE_V7)) {
- goto bad_reg;
- }
- switch (op2) {
- case 0: /* user enable */
- return env->cp15.c9_pmuserenr;
- case 1: /* interrupt enable set */
- case 2: /* interrupt enable clear */
- return env->cp15.c9_pminten;
- default:
- goto bad_reg;
- }
- default:
- goto bad_reg;
- }
- break;
- case 10: /* MMU TLB lockdown. */
- /* ??? TLB lockdown not implemented. */
- return 0;
- case 11: /* TCM DMA control. */
- case 12: /* Reserved. */
- goto bad_reg;
- case 13: /* Process ID. */
- switch (op2) {
- case 0:
- return env->cp15.c13_fcse;
- case 1:
- return env->cp15.c13_context;
- default:
- goto bad_reg;
- }
- case 14: /* Generic timer */
- if (arm_feature(env, ARM_FEATURE_GENERIC_TIMER)) {
- /* Dummy implementation: RAZ/WI for all */
- return 0;
- }
- goto bad_reg;
- case 15: /* Implementation specific. */
- if (arm_feature(env, ARM_FEATURE_XSCALE)) {
- if (op2 == 0 && crm == 1)
- return env->cp15.c15_cpar;
-
- goto bad_reg;
- }
- if (arm_feature(env, ARM_FEATURE_OMAPCP)) {
- switch (crm) {
- case 0:
- return 0;
- case 1: /* Read TI925T configuration. */
- return env->cp15.c15_ticonfig;
- case 2: /* Read I_max. */
- return env->cp15.c15_i_max;
- case 3: /* Read I_min. */
- return env->cp15.c15_i_min;
- case 4: /* Read thread-ID. */
- return env->cp15.c15_threadid;
- case 8: /* TI925T_status */
- return 0;
- }
- /* TODO: Peripheral port remap register:
- * On OMAP2 mcr p15, 0, rn, c15, c2, 4 sets up the interrupt
- * controller base address at $rn & ~0xfff and map size of
- * 0x200 << ($rn & 0xfff), when MMU is off. */
- goto bad_reg;
- }
- if (ARM_CPUID(env) == ARM_CPUID_CORTEXA9) {
- switch (crm) {
- case 0:
- if ((op1 == 4) && (op2 == 0)) {
- /* The config_base_address should hold the value of
- * the peripheral base. ARM should get this from a CPU
- * object property, but that support isn't available in
- * December 2011. Default to 0 for now and board models
- * that care can set it by a private hook */
- return env->cp15.c15_config_base_address;
- } else if ((op1 == 0) && (op2 == 0)) {
- /* power_control should be set to maximum latency. Again,
- default to 0 and set by private hook */
- return env->cp15.c15_power_control;
- } else if ((op1 == 0) && (op2 == 1)) {
- return env->cp15.c15_diagnostic;
- } else if ((op1 == 0) && (op2 == 2)) {
- return env->cp15.c15_power_diagnostic;
- }
- break;
- case 1: /* NEON Busy */
- return 0;
- case 5: /* tlb lockdown */
- case 6:
- case 7:
- if ((op1 == 5) && (op2 == 2)) {
- return 0;
- }
- break;
- default:
- break;
- }
- goto bad_reg;
- }
- return 0;
- }
-bad_reg:
- /* ??? For debugging only. Should raise illegal instruction exception. */
- cpu_abort(env, "Unimplemented cp15 register read (c%d, c%d, {%d, %d})\n",
- (insn >> 16) & 0xf, crm, op1, op2);
- return 0;
-}
-
void HELPER(set_r13_banked)(CPUARMState *env, uint32_t mode, uint32_t val)
{
if ((env->uncached_cpsr & CPSR_M) == mode) {
@@ -2024,20 +2289,6 @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t reg, uint32_t val)
}
}
-void cpu_arm_set_cp_io(CPUARMState *env, int cpnum,
- ARMReadCPFunc *cp_read, ARMWriteCPFunc *cp_write,
- void *opaque)
-{
- if (cpnum < 0 || cpnum > 14) {
- cpu_abort(env, "Bad coprocessor number: %i\n", cpnum);
- return;
- }
-
- env->cp[cpnum].cp_read = cp_read;
- env->cp[cpnum].cp_write = cp_write;
- env->cp[cpnum].opaque = opaque;
-}
-
#endif
/* Note that signed overflow is undefined in C. The following routines are
@@ -2868,12 +3119,3 @@ float64 VFP_HELPER(muladd, d)(float64 a, float64 b, float64 c, void *fpstp)
float_status *fpst = fpstp;
return float64_muladd(a, b, c, 0, fpst);
}
-
-void HELPER(set_teecr)(CPUARMState *env, uint32_t val)
-{
- val &= 1;
- if (env->teecr != val) {
- env->teecr = val;
- tb_flush(env);
- }
-}
diff --git a/target-arm/helper.h b/target-arm/helper.h
index 16dd5fcc89..21e9cfe05f 100644
--- a/target-arm/helper.h
+++ b/target-arm/helper.h
@@ -59,11 +59,10 @@ DEF_HELPER_0(cpsr_read, i32)
DEF_HELPER_3(v7m_msr, void, env, i32, i32)
DEF_HELPER_2(v7m_mrs, i32, env, i32)
-DEF_HELPER_3(set_cp15, void, env, i32, i32)
-DEF_HELPER_2(get_cp15, i32, env, i32)
-
-DEF_HELPER_3(set_cp, void, env, i32, i32)
-DEF_HELPER_2(get_cp, i32, env, i32)
+DEF_HELPER_3(set_cp_reg, void, env, ptr, i32)
+DEF_HELPER_2(get_cp_reg, i32, env, ptr)
+DEF_HELPER_3(set_cp_reg64, void, env, ptr, i64)
+DEF_HELPER_2(get_cp_reg64, i64, env, ptr)
DEF_HELPER_2(get_r13_banked, i32, env, i32)
DEF_HELPER_3(set_r13_banked, void, env, i32, i32)
@@ -459,8 +458,6 @@ DEF_HELPER_3(iwmmxt_muladdsl, i64, i64, i32, i32)
DEF_HELPER_3(iwmmxt_muladdsw, i64, i64, i32, i32)
DEF_HELPER_3(iwmmxt_muladdswl, i64, i64, i32, i32)
-DEF_HELPER_2(set_teecr, void, env, i32)
-
DEF_HELPER_3(neon_unzip8, void, env, i32, i32)
DEF_HELPER_3(neon_unzip16, void, env, i32, i32)
DEF_HELPER_3(neon_qunzip8, void, env, i32, i32)
diff --git a/target-arm/machine.c b/target-arm/machine.c
index f66b8dfa1f..a2a75fbd19 100644
--- a/target-arm/machine.c
+++ b/target-arm/machine.c
@@ -21,7 +21,6 @@ void cpu_save(QEMUFile *f, void *opaque)
qemu_put_be32(f, env->fiq_regs[i]);
}
qemu_put_be32(f, env->cp15.c0_cpuid);
- qemu_put_be32(f, env->cp15.c0_cachetype);
qemu_put_be32(f, env->cp15.c0_cssel);
qemu_put_be32(f, env->cp15.c1_sys);
qemu_put_be32(f, env->cp15.c1_coproc);
@@ -139,7 +138,6 @@ int cpu_load(QEMUFile *f, void *opaque, int version_id)
env->fiq_regs[i] = qemu_get_be32(f);
}
env->cp15.c0_cpuid = qemu_get_be32(f);
- env->cp15.c0_cachetype = qemu_get_be32(f);
env->cp15.c0_cssel = qemu_get_be32(f);
env->cp15.c1_sys = qemu_get_be32(f);
env->cp15.c1_coproc = qemu_get_be32(f);
diff --git a/target-arm/op_helper.c b/target-arm/op_helper.c
index b53369d7cb..490111c22f 100644
--- a/target-arm/op_helper.c
+++ b/target-arm/op_helper.c
@@ -23,13 +23,11 @@
#define SIGNBIT (uint32_t)0x80000000
#define SIGNBIT64 ((uint64_t)1 << 63)
-#if !defined(CONFIG_USER_ONLY)
static void raise_exception(int tt)
{
env->exception_index = tt;
cpu_loop_exit(env);
}
-#endif
uint32_t HELPER(neon_tbl)(uint32_t ireg, uint32_t def,
uint32_t rn, uint32_t maxindex)
@@ -287,6 +285,46 @@ void HELPER(set_user_reg)(uint32_t regno, uint32_t val)
}
}
+void HELPER(set_cp_reg)(CPUARMState *env, void *rip, uint32_t value)
+{
+ const ARMCPRegInfo *ri = rip;
+ int excp = ri->writefn(env, ri, value);
+ if (excp) {
+ raise_exception(excp);
+ }
+}
+
+uint32_t HELPER(get_cp_reg)(CPUARMState *env, void *rip)
+{
+ const ARMCPRegInfo *ri = rip;
+ uint64_t value;
+ int excp = ri->readfn(env, ri, &value);
+ if (excp) {
+ raise_exception(excp);
+ }
+ return value;
+}
+
+void HELPER(set_cp_reg64)(CPUARMState *env, void *rip, uint64_t value)
+{
+ const ARMCPRegInfo *ri = rip;
+ int excp = ri->writefn(env, ri, value);
+ if (excp) {
+ raise_exception(excp);
+ }
+}
+
+uint64_t HELPER(get_cp_reg64)(CPUARMState *env, void *rip)
+{
+ const ARMCPRegInfo *ri = rip;
+ uint64_t value;
+ int excp = ri->readfn(env, ri, &value);
+ if (excp) {
+ raise_exception(excp);
+ }
+ return value;
+}
+
/* ??? Flag setting arithmetic is awkward because we need to do comparisons.
The only way to do that in TCG is a conditional branch, which clobbers
all our temporaries. For now implement these as helper functions. */
diff --git a/target-arm/translate.c b/target-arm/translate.c
index 437d9dbf0e..a2a0ecddad 100644
--- a/target-arm/translate.c
+++ b/target-arm/translate.c
@@ -2439,226 +2439,6 @@ static int disas_dsp_insn(CPUARMState *env, DisasContext *s, uint32_t insn)
return 1;
}
-/* Disassemble system coprocessor instruction. Return nonzero if
- instruction is not defined. */
-static int disas_cp_insn(CPUARMState *env, DisasContext *s, uint32_t insn)
-{
- TCGv tmp, tmp2;
- uint32_t rd = (insn >> 12) & 0xf;
- uint32_t cp = (insn >> 8) & 0xf;
- if (IS_USER(s)) {
- return 1;
- }
-
- if (insn & ARM_CP_RW_BIT) {
- if (!env->cp[cp].cp_read)
- return 1;
- gen_set_pc_im(s->pc);
- tmp = tcg_temp_new_i32();
- tmp2 = tcg_const_i32(insn);
- gen_helper_get_cp(tmp, cpu_env, tmp2);
- tcg_temp_free(tmp2);
- store_reg(s, rd, tmp);
- } else {
- if (!env->cp[cp].cp_write)
- return 1;
- gen_set_pc_im(s->pc);
- tmp = load_reg(s, rd);
- tmp2 = tcg_const_i32(insn);
- gen_helper_set_cp(cpu_env, tmp2, tmp);
- tcg_temp_free(tmp2);
- tcg_temp_free_i32(tmp);
- }
- return 0;
-}
-
-static int cp15_user_ok(CPUARMState *env, uint32_t insn)
-{
- int cpn = (insn >> 16) & 0xf;
- int cpm = insn & 0xf;
- int op = ((insn >> 5) & 7) | ((insn >> 18) & 0x38);
-
- if (arm_feature(env, ARM_FEATURE_V7) && cpn == 9) {
- /* Performance monitor registers fall into three categories:
- * (a) always UNDEF in usermode
- * (b) UNDEF only if PMUSERENR.EN is 0
- * (c) always read OK and UNDEF on write (PMUSERENR only)
- */
- if ((cpm == 12 && (op < 6)) ||
- (cpm == 13 && (op < 3))) {
- return env->cp15.c9_pmuserenr;
- } else if (cpm == 14 && op == 0 && (insn & ARM_CP_RW_BIT)) {
- /* PMUSERENR, read only */
- return 1;
- }
- return 0;
- }
-
- if (cpn == 13 && cpm == 0) {
- /* TLS register. */
- if (op == 2 || (op == 3 && (insn & ARM_CP_RW_BIT)))
- return 1;
- }
- return 0;
-}
-
-static int cp15_tls_load_store(CPUARMState *env, DisasContext *s, uint32_t insn, uint32_t rd)
-{
- TCGv tmp;
- int cpn = (insn >> 16) & 0xf;
- int cpm = insn & 0xf;
- int op = ((insn >> 5) & 7) | ((insn >> 18) & 0x38);
-
- if (!arm_feature(env, ARM_FEATURE_V6K))
- return 0;
-
- if (!(cpn == 13 && cpm == 0))
- return 0;
-
- if (insn & ARM_CP_RW_BIT) {
- switch (op) {
- case 2:
- tmp = load_cpu_field(cp15.c13_tls1);
- break;
- case 3:
- tmp = load_cpu_field(cp15.c13_tls2);
- break;
- case 4:
- tmp = load_cpu_field(cp15.c13_tls3);
- break;
- default:
- return 0;
- }
- store_reg(s, rd, tmp);
-
- } else {
- tmp = load_reg(s, rd);
- switch (op) {
- case 2:
- store_cpu_field(tmp, cp15.c13_tls1);
- break;
- case 3:
- store_cpu_field(tmp, cp15.c13_tls2);
- break;
- case 4:
- store_cpu_field(tmp, cp15.c13_tls3);
- break;
- default:
- tcg_temp_free_i32(tmp);
- return 0;
- }
- }
- return 1;
-}
-
-/* Disassemble system coprocessor (cp15) instruction. Return nonzero if
- instruction is not defined. */
-static int disas_cp15_insn(CPUARMState *env, DisasContext *s, uint32_t insn)
-{
- uint32_t rd;
- TCGv tmp, tmp2;
-
- /* M profile cores use memory mapped registers instead of cp15. */
- if (arm_feature(env, ARM_FEATURE_M))
- return 1;
-
- if ((insn & (1 << 25)) == 0) {
- if (insn & (1 << 20)) {
- /* mrrc */
- return 1;
- }
- /* mcrr. Used for block cache operations, so implement as no-op. */
- return 0;
- }
- if ((insn & (1 << 4)) == 0) {
- /* cdp */
- return 1;
- }
- /* We special case a number of cp15 instructions which were used
- * for things which are real instructions in ARMv7. This allows
- * them to work in linux-user mode which doesn't provide functional
- * get_cp15/set_cp15 helpers, and is more efficient anyway.
- */
- switch ((insn & 0x0fff0fff)) {
- case 0x0e070f90:
- /* 0,c7,c0,4: Standard v6 WFI (also used in some pre-v6 cores).
- * In v7, this must NOP.
- */
- if (IS_USER(s)) {
- return 1;
- }
- if (!arm_feature(env, ARM_FEATURE_V7)) {
- /* Wait for interrupt. */
- gen_set_pc_im(s->pc);
- s->is_jmp = DISAS_WFI;
- }
- return 0;
- case 0x0e070f58:
- /* 0,c7,c8,2: Not all pre-v6 cores implemented this WFI,
- * so this is slightly over-broad.
- */
- if (!IS_USER(s) && !arm_feature(env, ARM_FEATURE_V6)) {
- /* Wait for interrupt. */
- gen_set_pc_im(s->pc);
- s->is_jmp = DISAS_WFI;
- return 0;
- }
- /* Otherwise continue to handle via helper function.
- * In particular, on v7 and some v6 cores this is one of
- * the VA-PA registers.
- */
- break;
- case 0x0e070f3d:
- /* 0,c7,c13,1: prefetch-by-MVA in v6, NOP in v7 */
- if (arm_feature(env, ARM_FEATURE_V6)) {
- return IS_USER(s) ? 1 : 0;
- }
- break;
- case 0x0e070f95: /* 0,c7,c5,4 : ISB */
- case 0x0e070f9a: /* 0,c7,c10,4: DSB */
- case 0x0e070fba: /* 0,c7,c10,5: DMB */
- /* Barriers in both v6 and v7 */
- if (arm_feature(env, ARM_FEATURE_V6)) {
- return 0;
- }
- break;
- default:
- break;
- }
-
- if (IS_USER(s) && !cp15_user_ok(env, insn)) {
- return 1;
- }
-
- rd = (insn >> 12) & 0xf;
-
- if (cp15_tls_load_store(env, s, insn, rd))
- return 0;
-
- tmp2 = tcg_const_i32(insn);
- if (insn & ARM_CP_RW_BIT) {
- tmp = tcg_temp_new_i32();
- gen_helper_get_cp15(tmp, cpu_env, tmp2);
- /* If the destination register is r15 then sets condition codes. */
- if (rd != 15)
- store_reg(s, rd, tmp);
- else
- tcg_temp_free_i32(tmp);
- } else {
- tmp = load_reg(s, rd);
- gen_helper_set_cp15(cpu_env, tmp2, tmp);
- tcg_temp_free_i32(tmp);
- /* Normally we would always end the TB here, but Linux
- * arch/arm/mach-pxa/sleep.S expects two instructions following
- * an MMU enable to execute from cache. Imitate this behaviour. */
- if (!arm_feature(env, ARM_FEATURE_XSCALE) ||
- (insn & 0x0fff0fff) != 0x0e010f10)
- gen_lookup_tb(s);
- }
- tcg_temp_free_i32(tmp2);
- return 0;
-}
-
#define VFP_REG_SHR(x, n) (((n) > 0) ? (x) >> (n) : (x) << -(n))
#define VFP_SREG(insn, bigbit, smallbit) \
((VFP_REG_SHR(insn, bigbit - 1) & 0x1e) | (((insn) >> (smallbit)) & 1))
@@ -6388,104 +6168,18 @@ static int disas_neon_data_insn(CPUARMState * env, DisasContext *s, uint32_t ins
return 0;
}
-static int disas_cp14_read(CPUARMState * env, DisasContext *s, uint32_t insn)
-{
- int crn = (insn >> 16) & 0xf;
- int crm = insn & 0xf;
- int op1 = (insn >> 21) & 7;
- int op2 = (insn >> 5) & 7;
- int rt = (insn >> 12) & 0xf;
- TCGv tmp;
-
- /* Minimal set of debug registers, since we don't support debug */
- if (op1 == 0 && crn == 0 && op2 == 0) {
- switch (crm) {
- case 0:
- /* DBGDIDR: just RAZ. In particular this means the
- * "debug architecture version" bits will read as
- * a reserved value, which should cause Linux to
- * not try to use the debug hardware.
- */
- tmp = tcg_const_i32(0);
- store_reg(s, rt, tmp);
- return 0;
- case 1:
- case 2:
- /* DBGDRAR and DBGDSAR: v7 only. Always RAZ since we
- * don't implement memory mapped debug components
- */
- if (ENABLE_ARCH_7) {
- tmp = tcg_const_i32(0);
- store_reg(s, rt, tmp);
- return 0;
- }
- break;
- default:
- break;
- }
- }
-
- if (arm_feature(env, ARM_FEATURE_THUMB2EE)) {
- if (op1 == 6 && crn == 0 && crm == 0 && op2 == 0) {
- /* TEECR */
- if (IS_USER(s))
- return 1;
- tmp = load_cpu_field(teecr);
- store_reg(s, rt, tmp);
- return 0;
- }
- if (op1 == 6 && crn == 1 && crm == 0 && op2 == 0) {
- /* TEEHBR */
- if (IS_USER(s) && (env->teecr & 1))
- return 1;
- tmp = load_cpu_field(teehbr);
- store_reg(s, rt, tmp);
- return 0;
- }
- }
- return 1;
-}
-
-static int disas_cp14_write(CPUARMState * env, DisasContext *s, uint32_t insn)
-{
- int crn = (insn >> 16) & 0xf;
- int crm = insn & 0xf;
- int op1 = (insn >> 21) & 7;
- int op2 = (insn >> 5) & 7;
- int rt = (insn >> 12) & 0xf;
- TCGv tmp;
-
- if (arm_feature(env, ARM_FEATURE_THUMB2EE)) {
- if (op1 == 6 && crn == 0 && crm == 0 && op2 == 0) {
- /* TEECR */
- if (IS_USER(s))
- return 1;
- tmp = load_reg(s, rt);
- gen_helper_set_teecr(cpu_env, tmp);
- tcg_temp_free_i32(tmp);
- return 0;
- }
- if (op1 == 6 && crn == 1 && crm == 0 && op2 == 0) {
- /* TEEHBR */
- if (IS_USER(s) && (env->teecr & 1))
- return 1;
- tmp = load_reg(s, rt);
- store_cpu_field(tmp, teehbr);
- return 0;
- }
- }
- return 1;
-}
-
static int disas_coproc_insn(CPUARMState * env, DisasContext *s, uint32_t insn)
{
- int cpnum;
+ int cpnum, is64, crn, crm, opc1, opc2, isread, rt, rt2;
+ const ARMCPRegInfo *ri;
+ ARMCPU *cpu = arm_env_get_cpu(env);
cpnum = (insn >> 8) & 0xf;
if (arm_feature(env, ARM_FEATURE_XSCALE)
&& ((env->cp15.c15_cpar ^ 0x3fff) & (1 << cpnum)))
return 1;
+ /* First check for coprocessor space used for actual instructions */
switch (cpnum) {
case 0:
case 1:
@@ -6498,22 +6192,154 @@ static int disas_coproc_insn(CPUARMState * env, DisasContext *s, uint32_t insn)
case 10:
case 11:
return disas_vfp_insn (env, s, insn);
- case 14:
- /* Coprocessors 7-15 are architecturally reserved by ARM.
- Unfortunately Intel decided to ignore this. */
- if (arm_feature(env, ARM_FEATURE_XSCALE))
- goto board;
- if (insn & (1 << 20))
- return disas_cp14_read(env, s, insn);
- else
- return disas_cp14_write(env, s, insn);
- case 15:
- return disas_cp15_insn (env, s, insn);
default:
- board:
- /* Unknown coprocessor. See if the board has hooked it. */
- return disas_cp_insn (env, s, insn);
+ break;
}
+
+ /* Otherwise treat as a generic register access */
+ is64 = (insn & (1 << 25)) == 0;
+ if (!is64 && ((insn & (1 << 4)) == 0)) {
+ /* cdp */
+ return 1;
+ }
+
+ crm = insn & 0xf;
+ if (is64) {
+ crn = 0;
+ opc1 = (insn >> 4) & 0xf;
+ opc2 = 0;
+ rt2 = (insn >> 16) & 0xf;
+ } else {
+ crn = (insn >> 16) & 0xf;
+ opc1 = (insn >> 21) & 7;
+ opc2 = (insn >> 5) & 7;
+ rt2 = 0;
+ }
+ isread = (insn >> 20) & 1;
+ rt = (insn >> 12) & 0xf;
+
+ ri = get_arm_cp_reginfo(cpu,
+ ENCODE_CP_REG(cpnum, is64, crn, crm, opc1, opc2));
+ if (ri) {
+ /* Check access permissions */
+ if (!cp_access_ok(env, ri, isread)) {
+ return 1;
+ }
+
+ /* Handle special cases first */
+ switch (ri->type & ~(ARM_CP_FLAG_MASK & ~ARM_CP_SPECIAL)) {
+ case ARM_CP_NOP:
+ return 0;
+ case ARM_CP_WFI:
+ if (isread) {
+ return 1;
+ }
+ gen_set_pc_im(s->pc);
+ s->is_jmp = DISAS_WFI;
+ break;
+ default:
+ break;
+ }
+
+ if (isread) {
+ /* Read */
+ if (is64) {
+ TCGv_i64 tmp64;
+ TCGv_i32 tmp;
+ if (ri->type & ARM_CP_CONST) {
+ tmp64 = tcg_const_i64(ri->resetvalue);
+ } else if (ri->readfn) {
+ TCGv_ptr tmpptr;
+ gen_set_pc_im(s->pc);
+ tmp64 = tcg_temp_new_i64();
+ tmpptr = tcg_const_ptr(ri);
+ gen_helper_get_cp_reg64(tmp64, cpu_env, tmpptr);
+ tcg_temp_free_ptr(tmpptr);
+ } else {
+ tmp64 = tcg_temp_new_i64();
+ tcg_gen_ld_i64(tmp64, cpu_env, ri->fieldoffset);
+ }
+ tmp = tcg_temp_new_i32();
+ tcg_gen_trunc_i64_i32(tmp, tmp64);
+ store_reg(s, rt, tmp);
+ tcg_gen_shri_i64(tmp64, tmp64, 32);
+ tcg_gen_trunc_i64_i32(tmp, tmp64);
+ store_reg(s, rt2, tmp);
+ } else {
+ TCGv tmp;
+ if (ri->type & ARM_CP_CONST) {
+ tmp = tcg_const_i32(ri->resetvalue);
+ } else if (ri->readfn) {
+ TCGv_ptr tmpptr;
+ gen_set_pc_im(s->pc);
+ tmp = tcg_temp_new_i32();
+ tmpptr = tcg_const_ptr(ri);
+ gen_helper_get_cp_reg(tmp, cpu_env, tmpptr);
+ tcg_temp_free_ptr(tmpptr);
+ } else {
+ tmp = load_cpu_offset(ri->fieldoffset);
+ }
+ if (rt == 15) {
+ /* Destination register of r15 for 32 bit loads sets
+ * the condition codes from the high 4 bits of the value
+ */
+ gen_set_nzcv(tmp);
+ tcg_temp_free_i32(tmp);
+ } else {
+ store_reg(s, rt, tmp);
+ }
+ }
+ } else {
+ /* Write */
+ if (ri->type & ARM_CP_CONST) {
+ /* If not forbidden by access permissions, treat as WI */
+ return 0;
+ }
+
+ if (is64) {
+ TCGv tmplo, tmphi;
+ TCGv_i64 tmp64 = tcg_temp_new_i64();
+ tmplo = load_reg(s, rt);
+ tmphi = load_reg(s, rt2);
+ tcg_gen_concat_i32_i64(tmp64, tmplo, tmphi);
+ tcg_temp_free_i32(tmplo);
+ tcg_temp_free_i32(tmphi);
+ if (ri->writefn) {
+ TCGv_ptr tmpptr = tcg_const_ptr(ri);
+ gen_set_pc_im(s->pc);
+ gen_helper_set_cp_reg64(cpu_env, tmpptr, tmp64);
+ tcg_temp_free_ptr(tmpptr);
+ } else {
+ tcg_gen_st_i64(tmp64, cpu_env, ri->fieldoffset);
+ }
+ tcg_temp_free_i64(tmp64);
+ } else {
+ if (ri->writefn) {
+ TCGv tmp;
+ TCGv_ptr tmpptr;
+ gen_set_pc_im(s->pc);
+ tmp = load_reg(s, rt);
+ tmpptr = tcg_const_ptr(ri);
+ gen_helper_set_cp_reg(cpu_env, tmpptr, tmp);
+ tcg_temp_free_ptr(tmpptr);
+ tcg_temp_free_i32(tmp);
+ } else {
+ TCGv tmp = load_reg(s, rt);
+ store_cpu_offset(tmp, ri->fieldoffset);
+ }
+ }
+ /* We default to ending the TB on a coprocessor register write,
+ * but allow this to be suppressed by the register definition
+ * (usually only necessary to work around guest bugs).
+ */
+ if (!(ri->type & ARM_CP_SUPPRESS_TB_END)) {
+ gen_lookup_tb(s);
+ }
+ }
+ return 0;
+ }
+
+ return 1;
}
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 07:58:27 +0000