diff options
Diffstat (limited to 'target-arm/helper.c')
-rw-r--r-- | target-arm/helper.c | 72 |
1 files changed, 42 insertions, 30 deletions
diff --git a/target-arm/helper.c b/target-arm/helper.c index 412c465345..769a182398 100644 --- a/target-arm/helper.c +++ b/target-arm/helper.c @@ -1908,7 +1908,7 @@ static void aa64_fpsr_write(CPUARMState *env, const ARMCPRegInfo *ri, static CPAccessResult aa64_daif_access(CPUARMState *env, const ARMCPRegInfo *ri) { - if (arm_current_el(env) == 0 && !(env->cp15.c1_sys & SCTLR_UMA)) { + if (arm_current_el(env) == 0 && !(env->cp15.sctlr_el[1] & SCTLR_UMA)) { return CP_ACCESS_TRAP; } return CP_ACCESS_OK; @@ -1926,7 +1926,7 @@ static CPAccessResult aa64_cacheop_access(CPUARMState *env, /* Cache invalidate/clean: NOP, but EL0 must UNDEF unless * SCTLR_EL1.UCI is set. */ - if (arm_current_el(env) == 0 && !(env->cp15.c1_sys & SCTLR_UCI)) { + if (arm_current_el(env) == 0 && !(env->cp15.sctlr_el[1] & SCTLR_UCI)) { return CP_ACCESS_TRAP; } return CP_ACCESS_OK; @@ -2003,7 +2003,7 @@ static CPAccessResult aa64_zva_access(CPUARMState *env, const ARMCPRegInfo *ri) /* We don't implement EL2, so the only control on DC ZVA is the * bit in the SCTLR which can prohibit access for EL0. */ - if (arm_current_el(env) == 0 && !(env->cp15.c1_sys & SCTLR_DZE)) { + if (arm_current_el(env) == 0 && !(env->cp15.sctlr_el[1] & SCTLR_DZE)) { return CP_ACCESS_TRAP; } return CP_ACCESS_OK; @@ -2042,6 +2042,24 @@ static void spsel_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val) update_spsel(env, val); } +static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = arm_env_get_cpu(env); + + if (raw_read(env, ri) == value) { + /* Skip the TLB flush if nothing actually changed; Linux likes + * to do a lot of pointless SCTLR writes. + */ + return; + } + + raw_write(env, ri, value); + /* ??? Lots of these bits are not implemented. */ + /* This may enable/disable the MMU, so do a TLB flush. */ + tlb_flush(CPU(cpu), 1); +} + static const ARMCPRegInfo v8_cp_reginfo[] = { /* Minimal set of EL0-visible registers. This will need to be expanded * significantly for system emulation of AArch64 CPUs. @@ -2311,6 +2329,10 @@ static const ARMCPRegInfo v8_el2_cp_reginfo[] = { }; static const ARMCPRegInfo v8_el3_cp_reginfo[] = { + { .name = "SCTLR_EL3", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 0, .opc2 = 0, + .access = PL3_RW, .raw_writefn = raw_write, .writefn = sctlr_write, + .fieldoffset = offsetof(CPUARMState, cp15.sctlr_el[3]) }, { .name = "ELR_EL3", .state = ARM_CP_STATE_AA64, .type = ARM_CP_NO_MIGRATE, .opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 1, @@ -2362,30 +2384,12 @@ static const ARMCPRegInfo el3_cp_reginfo[] = { REGINFO_SENTINEL }; -static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, - uint64_t value) -{ - ARMCPU *cpu = arm_env_get_cpu(env); - - if (raw_read(env, ri) == value) { - /* Skip the TLB flush if nothing actually changed; Linux likes - * to do a lot of pointless SCTLR writes. - */ - return; - } - - raw_write(env, ri, value); - /* ??? Lots of these bits are not implemented. */ - /* This may enable/disable the MMU, so do a TLB flush. */ - tlb_flush(CPU(cpu), 1); -} - static CPAccessResult ctr_el0_access(CPUARMState *env, const ARMCPRegInfo *ri) { /* Only accessible in EL0 if SCTLR.UCT is set (and only in AArch64, * but the AArch32 CTR has its own reginfo struct) */ - if (arm_current_el(env) == 0 && !(env->cp15.c1_sys & SCTLR_UCT)) { + if (arm_current_el(env) == 0 && !(env->cp15.sctlr_el[1] & SCTLR_UCT)) { return CP_ACCESS_TRAP; } return CP_ACCESS_OK; @@ -3182,8 +3186,10 @@ void register_cp_regs_for_features(ARMCPU *cpu) { ARMCPRegInfo sctlr = { .name = "SCTLR", .state = ARM_CP_STATE_BOTH, - .opc0 = 3, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_sys), + .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 0, + .access = PL1_RW, + .bank_fieldoffsets = { offsetof(CPUARMState, cp15.sctlr_s), + offsetof(CPUARMState, cp15.sctlr_ns) }, .writefn = sctlr_write, .resetvalue = cpu->reset_sctlr, .raw_writefn = raw_write, }; @@ -4278,7 +4284,7 @@ void arm_cpu_do_interrupt(CPUState *cs) if (new_mode == ARM_CPU_MODE_MON) { addr += env->cp15.mvbar; - } else if (env->cp15.c1_sys & SCTLR_V) { + } else if (A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_V) { /* High vectors. When enabled, base address cannot be remapped. */ addr += 0xffff0000; } else { @@ -4308,7 +4314,7 @@ void arm_cpu_do_interrupt(CPUState *cs) /* this is a lie, as the was no c1_sys on V4T/V5, but who cares * and we should just guard the thumb mode on V4 */ if (arm_feature(env, ARM_FEATURE_V4T)) { - env->thumb = (env->cp15.c1_sys & SCTLR_TE) != 0; + env->thumb = (A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_TE) != 0; } env->regs[14] = env->regs[15] + offset; env->regs[15] = addr; @@ -4339,7 +4345,7 @@ static inline int check_ap(CPUARMState *env, int ap, int domain_prot, } if (access_type == 1) return 0; - switch (env->cp15.c1_sys & (SCTLR_S | SCTLR_R)) { + switch (A32_BANKED_CURRENT_REG_GET(env, sctlr) & (SCTLR_S | SCTLR_R)) { case SCTLR_S: return is_user ? 0 : PAGE_READ; case SCTLR_R: @@ -4588,7 +4594,8 @@ static int get_phys_addr_v6(CPUARMState *env, uint32_t address, int access_type, goto do_fault; /* The simplified model uses AP[0] as an access control bit. */ - if ((env->cp15.c1_sys & SCTLR_AFE) && (ap & 1) == 0) { + if ((A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_AFE) + && (ap & 1) == 0) { /* Access flag fault. */ code = (code == 15) ? 6 : 3; goto do_fault; @@ -4921,11 +4928,16 @@ static inline int get_phys_addr(CPUARMState *env, target_ulong address, hwaddr *phys_ptr, int *prot, target_ulong *page_size) { + /* This is not entirely correct as get_phys_addr() can also be called + * from ats_write() for an address translation of a specific regime. + */ + uint32_t sctlr = A32_BANKED_CURRENT_REG_GET(env, sctlr); + /* Fast Context Switch Extension. */ if (address < 0x02000000) address += env->cp15.c13_fcse; - if ((env->cp15.c1_sys & SCTLR_M) == 0) { + if ((sctlr & SCTLR_M) == 0) { /* MMU/MPU disabled. */ *phys_ptr = address; *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; @@ -4938,7 +4950,7 @@ static inline int get_phys_addr(CPUARMState *env, target_ulong address, } else if (extended_addresses_enabled(env)) { return get_phys_addr_lpae(env, address, access_type, is_user, phys_ptr, prot, page_size); - } else if (env->cp15.c1_sys & SCTLR_XP) { + } else if (sctlr & SCTLR_XP) { return get_phys_addr_v6(env, address, access_type, is_user, phys_ptr, prot, page_size); } else { |