diff options
Diffstat (limited to 'target-arm/cpu.h')
| -rw-r--r-- | target-arm/cpu.h | 78 |
1 files changed, 73 insertions, 5 deletions
diff --git a/target-arm/cpu.h b/target-arm/cpu.h index 56ed591164..943046407d 100644 --- a/target-arm/cpu.h +++ b/target-arm/cpu.h @@ -572,18 +572,43 @@ void armv7m_nvic_complete_irq(void *opaque, int irq); * or via MRRC/MCRR?) * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. * (In this case crn and opc2 should be zero.) + * For AArch64, there is no 32/64 bit size distinction; + * instead all registers have a 2 bit op0, 3 bit op1 and op2, + * and 4 bit CRn and CRm. The encoding patterns are chosen + * to be easy to convert to and from the KVM encodings, and also + * so that the hashtable can contain both AArch32 and AArch64 + * registers (to allow for interprocessing where we might run + * 32 bit code on a 64 bit core). */ +/* This bit is private to our hashtable cpreg; in KVM register + * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 + * in the upper bits of the 64 bit ID. + */ +#define CP_REG_AA64_SHIFT 28 +#define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) + #define ENCODE_CP_REG(cp, is64, crn, crm, opc1, opc2) \ (((cp) << 16) | ((is64) << 15) | ((crn) << 11) | \ ((crm) << 7) | ((opc1) << 3) | (opc2)) +#define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ + (CP_REG_AA64_MASK | \ + ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ + ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ + ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ + ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ + ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ + ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) + /* Convert a full 64 bit KVM register ID to the truncated 32 bit * version used as a key for the coprocessor register hashtable */ static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) { uint32_t cpregid = kvmid; - if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { + if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { + cpregid |= CP_REG_AA64_MASK; + } else if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { cpregid |= (1 << 15); } return cpregid; @@ -594,11 +619,18 @@ static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) */ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) { - uint64_t kvmid = cpregid & ~(1 << 15); - if (cpregid & (1 << 15)) { - kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; + uint64_t kvmid; + + if (cpregid & CP_REG_AA64_MASK) { + kvmid = cpregid & ~CP_REG_AA64_MASK; + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; } else { - kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; + kvmid = cpregid & ~(1 << 15); + if (cpregid & (1 << 15)) { + kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; + } else { + kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; + } } return kvmid; } @@ -634,6 +666,21 @@ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) /* Mask of only the flag bits in a type field */ #define ARM_CP_FLAG_MASK 0x7f +/* Valid values for ARMCPRegInfo state field, indicating which of + * the AArch32 and AArch64 execution states this register is visible in. + * If the reginfo doesn't explicitly specify then it is AArch32 only. + * If the reginfo is declared to be visible in both states then a second + * reginfo is synthesised for the AArch32 view of the AArch64 register, + * such that the AArch32 view is the lower 32 bits of the AArch64 one. + * Note that we rely on the values of these enums as we iterate through + * the various states in some places. + */ +enum { + ARM_CP_STATE_AA32 = 0, + ARM_CP_STATE_AA64 = 1, + ARM_CP_STATE_BOTH = 2, +}; + /* Return true if cptype is a valid type field. This is used to try to * catch errors where the sentinel has been accidentally left off the end * of a list of registers. @@ -655,6 +702,8 @@ static inline bool cptype_valid(int cptype) * (ie anything visible in PL2 is visible in S-PL1, some things are only * visible in S-PL1) but "Secure PL1" is a bit of a mouthful, we bend the * terminology a little and call this PL3. + * In AArch64 things are somewhat simpler as the PLx bits line up exactly + * with the ELx exception levels. * * If access permissions for a register are more complex than can be * described with these bits, then use a laxer set of restrictions, and @@ -676,6 +725,10 @@ static inline bool cptype_valid(int cptype) static inline int arm_current_pl(CPUARMState *env) { + if (env->aarch64) { + return extract32(env->pstate, 2, 2); + } + if ((env->uncached_cpsr & 0x1f) == ARM_CPU_MODE_USR) { return 0; } @@ -713,12 +766,22 @@ struct ARMCPRegInfo { * then behave differently on read/write if necessary. * For 64 bit registers, only crm and opc1 are relevant; crn and opc2 * must both be zero. + * For AArch64-visible registers, opc0 is also used. + * Since there are no "coprocessors" in AArch64, cp is purely used as a + * way to distinguish (for KVM's benefit) guest-visible system registers + * from demuxed ones provided to preserve the "no side effects on + * KVM register read/write from QEMU" semantics. cp==0x13 is guest + * visible (to match KVM's encoding); cp==0 will be converted to + * cp==0x13 when the ARMCPRegInfo is registered, for convenience. */ uint8_t cp; uint8_t crn; uint8_t crm; + uint8_t opc0; uint8_t opc1; uint8_t opc2; + /* Execution state in which this register is visible: ARM_CP_STATE_* */ + int state; /* Register type: ARM_CP_* bits/values */ int type; /* Access rights: PL*_[RW] */ @@ -798,6 +861,11 @@ int arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri, /* CPReadFn that can be used for read-as-zero behaviour */ int arm_cp_read_zero(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t *value); +/* CPResetFn that does nothing, for use if no reset is required even + * if fieldoffset is non zero. + */ +void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque); + static inline bool cp_access_ok(CPUARMState *env, const ARMCPRegInfo *ri, int isread) { |