diff options
Diffstat (limited to 'qapi/block-core.json')
| -rw-r--r-- | qapi/block-core.json | 95 |
1 files changed, 38 insertions, 57 deletions
diff --git a/qapi/block-core.json b/qapi/block-core.json index 0f132fc995..f938316596 100644 --- a/qapi/block-core.json +++ b/qapi/block-core.json @@ -2053,7 +2053,7 @@ # @ignore: Ignore the request # @unmap: Forward as an unmap request # -# Since: 1.7 +# Since: 2.9 ## { 'enum': 'BlockdevDiscardOptions', 'data': [ 'ignore', 'unmap' ] } @@ -2082,7 +2082,7 @@ # @threads: Use qemu's thread pool # @native: Use native AIO backend (only Linux and Windows) # -# Since: 1.7 +# Since: 2.9 ## { 'enum': 'BlockdevAioOptions', 'data': [ 'threads', 'native' ] } @@ -2097,7 +2097,7 @@ # @no-flush: ignore any flush requests for the device (default: # false) # -# Since: 1.7 +# Since: 2.9 ## { 'struct': 'BlockdevCacheOptions', 'data': { '*direct': 'bool', @@ -2108,18 +2108,7 @@ # # Drivers that are supported in block device operations. # -# @host_device: Since 2.1 -# @host_cdrom: Since 2.1 -# @gluster: Since 2.7 -# @nbd: Since 2.8 -# @nfs: Since 2.8 -# @replication: Since 2.8 -# @ssh: Since 2.8 -# @iscsi: Since 2.9 -# @rbd: Since 2.9 -# @sheepdog: Since 2.9 -# -# Since: 2.0 +# Since: 2.9 ## { 'enum': 'BlockdevDriver', 'data': [ 'blkdebug', 'blkverify', 'bochs', 'cloop', @@ -2137,7 +2126,7 @@ # @filename: path to the image file # @aio: AIO backend (default: threads) (since: 2.8) # -# Since: 1.7 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsFile', 'data': { 'filename': 'str', @@ -2153,7 +2142,7 @@ # requests. Default to zero which completes requests immediately. # (Since 2.4) # -# Since: 2.2 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsNull', 'data': { '*size': 'int', '*latency-ns': 'uint64' } } @@ -2173,7 +2162,7 @@ # (since 2.4) # @rw: whether to allow write operations (default: false) # -# Since: 1.7 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsVVFAT', 'data': { 'dir': 'str', '*fat-type': 'int', '*floppy': 'bool', @@ -2187,7 +2176,7 @@ # # @file: reference to or definition of the data source block device # -# Since: 1.7 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsGenericFormat', 'data': { 'file': 'BlockdevRef' } } @@ -2201,7 +2190,7 @@ # the decryption key (since 2.6). Mandatory except when # doing a metadata-only probe of the image. # -# Since: 2.6 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsLUKS', 'base': 'BlockdevOptionsGenericFormat', @@ -2219,7 +2208,7 @@ # allowed to pass an empty string here in order to disable the # default backing file. # -# Since: 1.7 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsGenericCOWFormat', 'base': 'BlockdevOptionsGenericFormat', @@ -2240,7 +2229,7 @@ # # @all: Perform all available overlap checks # -# Since: 2.2 +# Since: 2.9 ## { 'enum': 'Qcow2OverlapCheckMode', 'data': [ 'none', 'constant', 'cached', 'all' ] } @@ -2255,7 +2244,7 @@ # @template: Specifies a template mode which can be adjusted using the other # flags, defaults to 'cached' # -# Since: 2.2 +# Since: 2.9 ## { 'struct': 'Qcow2OverlapCheckFlags', 'data': { '*template': 'Qcow2OverlapCheckMode', @@ -2279,7 +2268,7 @@ # # @mode: named mode which chooses a specific set of flags # -# Since: 2.2 +# Since: 2.9 ## { 'alternate': 'Qcow2OverlapChecks', 'data': { 'flags': 'Qcow2OverlapCheckFlags', @@ -2320,7 +2309,7 @@ # caches. The interval is in seconds. The default value # is 0 and it disables this feature (since 2.5) # -# Since: 1.7 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsQcow2', 'base': 'BlockdevOptionsGenericCOWFormat', @@ -2347,7 +2336,7 @@ # # TODO: Expose the host_key_check option in QMP # -# Since: 2.8 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsSsh', 'data': { 'server': 'InetSocketAddress', @@ -2360,7 +2349,7 @@ # # Trigger events supported by blkdebug. # -# Since: 2.0 +# Since: 2.9 ## { 'enum': 'BlkdebugEvent', 'prefix': 'BLKDBG', 'data': [ 'l1_update', 'l1_grow_alloc_table', 'l1_grow_write_table', @@ -2400,7 +2389,7 @@ # # @immediately: fail immediately; defaults to false # -# Since: 2.0 +# Since: 2.9 ## { 'struct': 'BlkdebugInjectErrorOptions', 'data': { 'event': 'BlkdebugEvent', @@ -2423,7 +2412,7 @@ # @new_state: the state identifier blkdebug is supposed to assume if # this event is triggered # -# Since: 2.0 +# Since: 2.9 ## { 'struct': 'BlkdebugSetStateOptions', 'data': { 'event': 'BlkdebugEvent', @@ -2446,7 +2435,7 @@ # # @set-state: array of state-change descriptions # -# Since: 2.0 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsBlkdebug', 'data': { 'image': 'BlockdevRef', @@ -2464,7 +2453,7 @@ # # @raw: raw image used for verification # -# Since: 2.0 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsBlkverify', 'data': { 'test': 'BlockdevRef', @@ -2479,7 +2468,7 @@ # # @fifo: read only from the first child that has not failed # -# Since: 2.2 +# Since: 2.9 ## { 'enum': 'QuorumReadPattern', 'data': [ 'quorum', 'fifo' ] } @@ -2501,7 +2490,7 @@ # @read-pattern: choose read pattern and set to quorum by default # (Since 2.2) # -# Since: 2.0 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsQuorum', 'data': { '*blkverify': 'bool', @@ -2526,7 +2515,7 @@ # # @logfile: libgfapi log file (default /dev/stderr) (Since 2.8) # -# Since: 2.7 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsGluster', 'data': { 'volume': 'str', @@ -2685,7 +2674,7 @@ # # @secondary: Secondary mode, receive the vm's state from primary QEMU. # -# Since: 2.8 +# Since: 2.9 ## { 'enum' : 'ReplicationMode', 'data' : [ 'primary', 'secondary' ] } @@ -2700,7 +2689,7 @@ # node who owns the replication node chain. Must not be given in # primary mode. # -# Since: 2.8 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsReplication', 'base': 'BlockdevOptionsGenericFormat', @@ -2714,7 +2703,7 @@ # # @inet: TCP transport # -# Since: 2.8 +# Since: 2.9 ## { 'enum': 'NFSTransport', 'data': [ 'inet' ] } @@ -2728,7 +2717,7 @@ # # @host: host address for NFS server # -# Since: 2.8 +# Since: 2.9 ## { 'struct': 'NFSServer', 'data': { 'type': 'NFSTransport', @@ -2763,7 +2752,7 @@ # @debug: set the NFS debug level (max 2) (defaults # to libnfs default) # -# Since: 2.8 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsNfs', 'data': { 'server': 'NFSServer', @@ -2782,7 +2771,7 @@ # # @filename: path to the image file # -# Since: 1.7 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsCurl', 'data': { 'filename': 'str' } } @@ -2798,7 +2787,7 @@ # # @tls-creds: TLS credentials ID # -# Since: 2.8 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsNbd', 'data': { 'server': 'SocketAddress', @@ -2813,7 +2802,7 @@ # @offset: position where the block device starts # @size: the assumed size of the device # -# Since: 2.8 +# Since: 2.9 ## { 'struct': 'BlockdevOptionsRaw', 'base': 'BlockdevOptionsGenericFormat', @@ -2837,7 +2826,7 @@ # # Remaining options are determined by the block driver. # -# Since: 1.7 +# Since: 2.9 ## { 'union': 'BlockdevOptions', 'base': { 'driver': 'BlockdevDriver', @@ -2894,7 +2883,7 @@ # empty string means that no block device should be # referenced. # -# Since: 1.7 +# Since: 2.9 ## { 'alternate': 'BlockdevRef', 'data': { 'definition': 'BlockdevOptions', @@ -2907,11 +2896,7 @@ # BlockBackend will be created; otherwise, @node-name is mandatory at the top # level and no BlockBackend will be created. # -# Note: This command is still a work in progress. It doesn't support all -# block drivers among other things. Stay away from it unless you want -# to help with its development. -# -# Since: 1.7 +# Since: 2.9 # # Example: # @@ -2957,7 +2942,7 @@ { 'command': 'blockdev-add', 'data': 'BlockdevOptions', 'boxed': true } ## -# @x-blockdev-del: +# @blockdev-del: # # Deletes a block device that has been added using blockdev-add. # The command will fail if the node is attached to a device or is @@ -2965,11 +2950,7 @@ # # @node-name: Name of the graph node to delete. # -# Note: This command is still a work in progress and is considered -# experimental. Stay away from it unless you want to help with its -# development. -# -# Since: 2.5 +# Since: 2.9 # # Example: # @@ -2985,13 +2966,13 @@ # } # <- { "return": {} } # -# -> { "execute": "x-blockdev-del", +# -> { "execute": "blockdev-del", # "arguments": { "node-name": "node0" } # } # <- { "return": {} } # ## -{ 'command': 'x-blockdev-del', 'data': { 'node-name': 'str' } } +{ 'command': 'blockdev-del', 'data': { 'node-name': 'str' } } ## # @blockdev-open-tray: |