diff options
Diffstat (limited to 'pc-bios')
| -rw-r--r-- | pc-bios/bios.bin | bin | 65536 -> 131072 bytes | |||
| -rw-r--r-- | pc-bios/bios.diff | 3050 |
2 files changed, 2826 insertions, 224 deletions
diff --git a/pc-bios/bios.bin b/pc-bios/bios.bin Binary files differindex 64be517b24..051fdbb148 100644 --- a/pc-bios/bios.bin +++ b/pc-bios/bios.bin diff --git a/pc-bios/bios.diff b/pc-bios/bios.diff index e87592784a..e70499017d 100644 --- a/pc-bios/bios.diff +++ b/pc-bios/bios.diff @@ -1,270 +1,2872 @@ -Index: apmbios.S -=================================================================== -RCS file: /cvsroot/bochs/bochs/bios/apmbios.S,v -retrieving revision 1.4 -diff -u -w -r1.4 apmbios.S ---- apmbios.S 26 Dec 2005 10:35:51 -0000 1.4 -+++ apmbios.S 3 May 2006 21:22:46 -0000 -@@ -225,6 +225,7 @@ - APMSYM(05): - cmp al, #0x05 - jne APMSYM(07) -+ sti - hlt - jmp APMSYM(ok) +diff -ruN --exclude Makefile bios/acpi-dsdt.dsl bios.new/acpi-dsdt.dsl +--- bios/acpi-dsdt.dsl 1970-01-01 01:00:00.000000000 +0100 ++++ bios.new/acpi-dsdt.dsl 2006-09-24 20:27:54.000000000 +0200 +@@ -0,0 +1,559 @@ ++/* ++ * QEMU ACPI DSDT ASL definition ++ * ++ * Copyright (c) 2006 Fabrice Bellard ++ * ++ * This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU Lesser General Public ++ * License version 2 as published by the Free Software Foundation. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * Lesser General Public License for more details. ++ * ++ * You should have received a copy of the GNU Lesser General Public ++ * License along with this library; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++DefinitionBlock ( ++ "acpi-dsdt.aml", // Output Filename ++ "DSDT", // Signature ++ 0x01, // DSDT Compliance Revision ++ "QEMU", // OEMID ++ "QEMUDSDT", // TABLE ID ++ 0x1 // OEM Revision ++ ) ++{ ++ Scope (\) ++ { ++ /* CMOS memory access */ ++ OperationRegion (CMS, SystemIO, 0x70, 0x02) ++ Field (CMS, ByteAcc, NoLock, Preserve) ++ { ++ CMSI, 8, ++ CMSD, 8 ++ } ++ Method (CMRD, 1, NotSerialized) ++ { ++ Store (Arg0, CMSI) ++ Store (CMSD, Local0) ++ Return (Local0) ++ } ++ ++ /* Debug Output */ ++ OperationRegion (DBG, SystemIO, 0xb044, 0x04) ++ Field (DBG, DWordAcc, NoLock, Preserve) ++ { ++ DBGL, 32, ++ } ++ } ++ ++ ++ /* PCI Bus definition */ ++ Scope(\_SB) { ++ Device(PCI0) { ++ Name (_HID, EisaId ("PNP0A03")) ++ Name (_ADR, 0x00) ++ Name (_UID, 1) ++ Name(_PRT, Package() { ++ /* PCI IRQ routing table, example from ACPI 2.0a specification, ++ section 6.2.8.1 */ ++ /* Note: we provide the same info as the PCI routing ++ table of the Bochs BIOS */ ++ ++ // PCI Slot 0 ++ Package() {0x0000ffff, 0, LNKD, 0}, ++ Package() {0x0000ffff, 1, LNKA, 0}, ++ Package() {0x0000ffff, 2, LNKB, 0}, ++ Package() {0x0000ffff, 3, LNKC, 0}, ++ ++ // PCI Slot 1 ++ Package() {0x0001ffff, 0, LNKA, 0}, ++ Package() {0x0001ffff, 1, LNKB, 0}, ++ Package() {0x0001ffff, 2, LNKC, 0}, ++ Package() {0x0001ffff, 3, LNKD, 0}, ++ ++ // PCI Slot 2 ++ Package() {0x0002ffff, 0, LNKB, 0}, ++ Package() {0x0002ffff, 1, LNKC, 0}, ++ Package() {0x0002ffff, 2, LNKD, 0}, ++ Package() {0x0002ffff, 3, LNKA, 0}, ++ ++ // PCI Slot 3 ++ Package() {0x0003ffff, 0, LNKC, 0}, ++ Package() {0x0003ffff, 1, LNKD, 0}, ++ Package() {0x0003ffff, 2, LNKA, 0}, ++ Package() {0x0003ffff, 3, LNKB, 0}, ++ ++ // PCI Slot 4 ++ Package() {0x0004ffff, 0, LNKD, 0}, ++ Package() {0x0004ffff, 1, LNKA, 0}, ++ Package() {0x0004ffff, 2, LNKB, 0}, ++ Package() {0x0004ffff, 3, LNKC, 0}, ++ ++ // PCI Slot 5 ++ Package() {0x0005ffff, 0, LNKA, 0}, ++ Package() {0x0005ffff, 1, LNKB, 0}, ++ Package() {0x0005ffff, 2, LNKC, 0}, ++ Package() {0x0005ffff, 3, LNKD, 0}, ++ }) ++ ++ Method (_CRS, 0, NotSerialized) ++ { ++ Name (MEMP, ResourceTemplate () ++ { ++ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, ++ 0x0000, // Address Space Granularity ++ 0x0000, // Address Range Minimum ++ 0x00FF, // Address Range Maximum ++ 0x0000, // Address Translation Offset ++ 0x0100, // Address Length ++ ,, ) ++ IO (Decode16, ++ 0x0CF8, // Address Range Minimum ++ 0x0CF8, // Address Range Maximum ++ 0x01, // Address Alignment ++ 0x08, // Address Length ++ ) ++ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, ++ 0x0000, // Address Space Granularity ++ 0x0000, // Address Range Minimum ++ 0x0CF7, // Address Range Maximum ++ 0x0000, // Address Translation Offset ++ 0x0CF8, // Address Length ++ ,, , TypeStatic) ++ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, ++ 0x0000, // Address Space Granularity ++ 0x0D00, // Address Range Minimum ++ 0xFFFF, // Address Range Maximum ++ 0x0000, // Address Translation Offset ++ 0xF300, // Address Length ++ ,, , TypeStatic) ++ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, ++ 0x00000000, // Address Space Granularity ++ 0x000A0000, // Address Range Minimum ++ 0x000BFFFF, // Address Range Maximum ++ 0x00000000, // Address Translation Offset ++ 0x00020000, // Address Length ++ ,, , AddressRangeMemory, TypeStatic) ++ DWordMemory (ResourceProducer, PosDecode, MinNotFixed, MaxFixed, NonCacheable, ReadWrite, ++ 0x00000000, // Address Space Granularity ++ 0x00000000, // Address Range Minimum ++ 0xFEBFFFFF, // Address Range Maximum ++ 0x00000000, // Address Translation Offset ++ 0x00000000, // Address Length ++ ,, MEMF, AddressRangeMemory, TypeStatic) ++ }) ++ CreateDWordField (MEMP, \_SB.PCI0._CRS.MEMF._MIN, PMIN) ++ CreateDWordField (MEMP, \_SB.PCI0._CRS.MEMF._MAX, PMAX) ++ CreateDWordField (MEMP, \_SB.PCI0._CRS.MEMF._LEN, PLEN) ++ /* compute available RAM */ ++ Add(CMRD(0x34), ShiftLeft(CMRD(0x35), 8), Local0) ++ ShiftLeft(Local0, 16, Local0) ++ Add(Local0, 0x1000000, Local0) ++ /* update field of last region */ ++ Store(Local0, PMIN) ++ Subtract (PMAX, PMIN, PLEN) ++ Increment (PLEN) ++ Return (MEMP) ++ } ++ } ++ } ++ ++ Scope(\_SB.PCI0) { ++ ++ /* PIIX3 ISA bridge */ ++ Device (ISA) { ++ Name (_ADR, 0x00010000) ++ ++ /* PIIX PCI to ISA irq remapping */ ++ OperationRegion (P40C, PCI_Config, 0x60, 0x04) ++ ++ ++ /* Keyboard seems to be important for WinXP install */ ++ Device (KBD) ++ { ++ Name (_HID, EisaId ("PNP0303")) ++ Method (_STA, 0, NotSerialized) ++ { ++ Return (0x0f) ++ } ++ ++ Method (_CRS, 0, NotSerialized) ++ { ++ Name (TMP, ResourceTemplate () ++ { ++ IO (Decode16, ++ 0x0060, // Address Range Minimum ++ 0x0060, // Address Range Maximum ++ 0x01, // Address Alignment ++ 0x01, // Address Length ++ ) ++ IO (Decode16, ++ 0x0064, // Address Range Minimum ++ 0x0064, // Address Range Maximum ++ 0x01, // Address Alignment ++ 0x01, // Address Length ++ ) ++ IRQNoFlags () ++ {1} ++ }) ++ Return (TMP) ++ } ++ } ++ ++ /* PS/2 mouse */ ++ Device (MOU) ++ { ++ Name (_HID, EisaId ("PNP0F13")) ++ Method (_STA, 0, NotSerialized) ++ { ++ Return (0x0f) ++ } ++ ++ Method (_CRS, 0, NotSerialized) ++ { ++ Name (TMP, ResourceTemplate () ++ { ++ IRQNoFlags () {12} ++ }) ++ Return (TMP) ++ } ++ } ++ ++ /* PS/2 floppy controller */ ++ Device (FDC0) ++ { ++ Name (_HID, EisaId ("PNP0700")) ++ Method (_STA, 0, NotSerialized) ++ { ++ Return (0x0F) ++ } ++ Method (_CRS, 0, NotSerialized) ++ { ++ Name (BUF0, ResourceTemplate () ++ { ++ IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) ++ IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) ++ IRQNoFlags () {6} ++ DMA (Compatibility, NotBusMaster, Transfer8) {2} ++ }) ++ Return (BUF0) ++ } ++ } ++ ++ /* Parallel port */ ++ Device (LPT) ++ { ++ Name (_HID, EisaId ("PNP0400")) ++ Method (_STA, 0, NotSerialized) ++ { ++ Store (\_SB.PCI0.PX13.DRSA, Local0) ++ And (Local0, 0x80000000, Local0) ++ If (LEqual (Local0, 0)) ++ { ++ Return (0x00) ++ } ++ Else ++ { ++ Return (0x0F) ++ } ++ } ++ Method (_CRS, 0, NotSerialized) ++ { ++ Name (BUF0, ResourceTemplate () ++ { ++ IO (Decode16, 0x0378, 0x0378, 0x08, 0x08) ++ IRQNoFlags () {7} ++ }) ++ Return (BUF0) ++ } ++ } ++ ++ /* Serial Ports */ ++ Device (COM1) ++ { ++ Name (_HID, EisaId ("PNP0501")) ++ Name (_UID, 0x01) ++ Method (_STA, 0, NotSerialized) ++ { ++ Store (\_SB.PCI0.PX13.DRSC, Local0) ++ And (Local0, 0x08000000, Local0) ++ If (LEqual (Local0, 0)) ++ { ++ Return (0x00) ++ } ++ Else ++ { ++ Return (0x0F) ++ } ++ } ++ Method (_CRS, 0, NotSerialized) ++ { ++ Name (BUF0, ResourceTemplate () ++ { ++ IO (Decode16, 0x03F8, 0x03F8, 0x00, 0x08) ++ IRQNoFlags () {4} ++ }) ++ Return (BUF0) ++ } ++ } ++ ++ Device (COM2) ++ { ++ Name (_HID, EisaId ("PNP0501")) ++ Name (_UID, 0x02) ++ Method (_STA, 0, NotSerialized) ++ { ++ Store (\_SB.PCI0.PX13.DRSC, Local0) ++ And (Local0, 0x80000000, Local0) ++ If (LEqual (Local0, 0)) ++ { ++ Return (0x00) ++ } ++ Else ++ { ++ Return (0x0F) ++ } ++ } ++ Method (_CRS, 0, NotSerialized) ++ { ++ Name (BUF0, ResourceTemplate () ++ { ++ IO (Decode16, 0x02F8, 0x02F8, 0x00, 0x08) ++ IRQNoFlags () {3} ++ }) ++ Return (BUF0) ++ } ++ } ++ } ++ ++ /* PIIX4 PM */ ++ Device (PX13) { ++ Name (_ADR, 0x00010003) ++ ++ OperationRegion (P13C, PCI_Config, 0x5c, 0x24) ++ Field (P13C, DWordAcc, NoLock, Preserve) ++ { ++ DRSA, 32, ++ DRSB, 32, ++ DRSC, 32, ++ DRSE, 32, ++ DRSF, 32, ++ DRSG, 32, ++ DRSH, 32, ++ DRSI, 32, ++ DRSJ, 32 ++ } ++ } ++ } ++ ++ /* PCI IRQs */ ++ Scope(\_SB) { ++ Field (\_SB.PCI0.ISA.P40C, ByteAcc, NoLock, Preserve) ++ { ++ PRQ0, 8, ++ PRQ1, 8, ++ PRQ2, 8, ++ PRQ3, 8 ++ } ++ ++ Device(LNKA){ ++ Name(_HID, EISAID("PNP0C0F")) // PCI interrupt link ++ Name(_UID, 1) ++ Name(_PRS, ResourceTemplate(){ ++ IRQ (Level, ActiveLow, Shared) ++ {3,4,5,6,7,9,10,11,12} ++ }) ++ Method (_STA, 0, NotSerialized) ++ { ++ Store (0x0B, Local0) ++ If (And (0x80, PRQ0, Local1)) ++ { ++ Store (0x09, Local0) ++ } ++ Return (Local0) ++ } ++ Method (_DIS, 0, NotSerialized) ++ { ++ Or (PRQ0, 0x80, PRQ0) ++ } ++ Method (_CRS, 0, NotSerialized) ++ { ++ Name (PRR0, ResourceTemplate () ++ { ++ IRQ (Level, ActiveLow, Shared) ++ {1} ++ }) ++ CreateWordField (PRR0, 0x01, TMP) ++ Store (PRQ0, Local0) ++ If (LLess (Local0, 0x80)) ++ { ++ ShiftLeft (One, Local0, TMP) ++ } ++ Else ++ { ++ Store (Zero, TMP) ++ } ++ Return (PRR0) ++ } ++ Method (_SRS, 1, NotSerialized) ++ { ++ CreateWordField (Arg0, 0x01, TMP) ++ FindSetRightBit (TMP, Local0) ++ Decrement (Local0) ++ Store (Local0, PRQ0) ++ } ++ } ++ Device(LNKB){ ++ Name(_HID, EISAID("PNP0C0F")) // PCI interrupt link ++ Name(_UID, 2) ++ Name(_PRS, ResourceTemplate(){ ++ IRQ (Level, ActiveLow, Shared) ++ {3,4,5,6,7,9,10,11,12} ++ }) ++ Method (_STA, 0, NotSerialized) ++ { ++ Store (0x0B, Local0) ++ If (And (0x80, PRQ1, Local1)) ++ { ++ Store (0x09, Local0) ++ } ++ Return (Local0) ++ } ++ Method (_DIS, 0, NotSerialized) ++ { ++ Or (PRQ1, 0x80, PRQ1) ++ } ++ Method (_CRS, 0, NotSerialized) ++ { ++ Name (PRR0, ResourceTemplate () ++ { ++ IRQ (Level, ActiveLow, Shared) ++ {1} ++ }) ++ CreateWordField (PRR0, 0x01, TMP) ++ Store (PRQ1, Local0) ++ If (LLess (Local0, 0x80)) ++ { ++ ShiftLeft (One, Local0, TMP) ++ } ++ Else ++ { ++ Store (Zero, TMP) ++ } ++ Return (PRR0) ++ } ++ Method (_SRS, 1, NotSerialized) ++ { ++ CreateWordField (Arg0, 0x01, TMP) ++ FindSetRightBit (TMP, Local0) ++ Decrement (Local0) ++ Store (Local0, PRQ1) ++ } ++ } ++ Device(LNKC){ ++ Name(_HID, EISAID("PNP0C0F")) // PCI interrupt link ++ Name(_UID, 3) ++ Name(_PRS, ResourceTemplate(){ ++ IRQ (Level, ActiveLow, Shared) ++ {3,4,5,6,7,9,10,11,12} ++ }) ++ Method (_STA, 0, NotSerialized) ++ { ++ Store (0x0B, Local0) ++ If (And (0x80, PRQ2, Local1)) ++ { ++ Store (0x09, Local0) ++ } ++ Return (Local0) ++ } ++ Method (_DIS, 0, NotSerialized) ++ { ++ Or (PRQ2, 0x80, PRQ2) ++ } ++ Method (_CRS, 0, NotSerialized) ++ { ++ Name (PRR0, ResourceTemplate () ++ { ++ IRQ (Level, ActiveLow, Shared) ++ {1} ++ }) ++ CreateWordField (PRR0, 0x01, TMP) ++ Store (PRQ2, Local0) ++ If (LLess (Local0, 0x80)) ++ { ++ ShiftLeft (One, Local0, TMP) ++ } ++ Else ++ { ++ Store (Zero, TMP) ++ } ++ Return (PRR0) ++ } ++ Method (_SRS, 1, NotSerialized) ++ { ++ CreateWordField (Arg0, 0x01, TMP) ++ FindSetRightBit (TMP, Local0) ++ Decrement (Local0) ++ Store (Local0, PRQ2) ++ } ++ } ++ Device(LNKD){ ++ Name(_HID, EISAID("PNP0C0F")) // PCI interrupt link ++ Name(_UID, 4) ++ Name(_PRS, ResourceTemplate(){ ++ IRQ (Level, ActiveLow, Shared) ++ {3,4,5,6,7,9,10,11,12} ++ }) ++ Method (_STA, 0, NotSerialized) ++ { ++ Store (0x0B, Local0) ++ If (And (0x80, PRQ3, Local1)) ++ { ++ Store (0x09, Local0) ++ } ++ Return (Local0) ++ } ++ Method (_DIS, 0, NotSerialized) ++ { ++ Or (PRQ3, 0x80, PRQ3) ++ } ++ Method (_CRS, 0, NotSerialized) ++ { ++ Name (PRR0, ResourceTemplate () ++ { ++ IRQ (Level, ActiveLow, Shared) ++ {1} ++ }) ++ CreateWordField (PRR0, 0x01, TMP) ++ Store (PRQ3, Local0) ++ If (LLess (Local0, 0x80)) ++ { ++ ShiftLeft (One, Local0, TMP) ++ } ++ Else ++ { ++ Store (Zero, TMP) ++ } ++ Return (PRR0) ++ } ++ Method (_SRS, 1, NotSerialized) ++ { ++ CreateWordField (Arg0, 0x01, TMP) ++ FindSetRightBit (TMP, Local0) ++ Decrement (Local0) ++ Store (Local0, PRQ3) ++ } ++ } ++ } ++ ++ /* S5 = power off state */ ++ Name (_S5, Package (4) { ++ 0x00, // PM1a_CNT.SLP_TYP ++ 0x00, // PM2a_CNT.SLP_TYP ++ 0x00, // reserved ++ 0x00, // reserved ++ }) ++} +diff -ruN --exclude Makefile bios/acpi-dsdt.hex bios.new/acpi-dsdt.hex +--- bios/acpi-dsdt.hex 1970-01-01 01:00:00.000000000 +0100 ++++ bios.new/acpi-dsdt.hex 2006-09-24 20:27:54.000000000 +0200 +@@ -0,0 +1,278 @@ ++/* ++ * ++ * Intel ACPI Component Architecture ++ * ASL Optimizing Compiler version 20060421 [Apr 29 2006] ++ * Copyright (C) 2000 - 2006 Intel Corporation ++ * Supports ACPI Specification Revision 3.0a ++ * ++ * Compilation of "/usr/local/home/bellard/qemu-current/hw/acpi-dsdt.dsl" - Wed Jun 14 20:09:53 2006 ++ * ++ * C source code output ++ * ++ */ ++unsigned char AmlCode[] = ++{ ++ 0x44,0x53,0x44,0x54,0x32,0x08,0x00,0x00, /* 00000000 "DSDT2..." */ ++ 0x01,0x5B,0x51,0x45,0x4D,0x55,0x00,0x00, /* 00000008 ".[QEMU.." */ ++ 0x51,0x45,0x4D,0x55,0x44,0x53,0x44,0x54, /* 00000010 "QEMUDSDT" */ ++ 0x01,0x00,0x00,0x00,0x49,0x4E,0x54,0x4C, /* 00000018 "....INTL" */ ++ 0x21,0x04,0x06,0x20,0x10,0x4F,0x04,0x5C, /* 00000020 "!.. .O.\" */ ++ 0x00,0x5B,0x80,0x43,0x4D,0x53,0x5F,0x01, /* 00000028 ".[.CMS_." */ ++ 0x0A,0x70,0x0A,0x02,0x5B,0x81,0x10,0x43, /* 00000030 ".p..[..C" */ ++ 0x4D,0x53,0x5F,0x01,0x43,0x4D,0x53,0x49, /* 00000038 "MS_.CMSI" */ ++ 0x08,0x43,0x4D,0x53,0x44,0x08,0x14,0x14, /* 00000040 ".CMSD..." */ ++ 0x43,0x4D,0x52,0x44,0x01,0x70,0x68,0x43, /* 00000048 "CMRD.phC" */ ++ 0x4D,0x53,0x49,0x70,0x43,0x4D,0x53,0x44, /* 00000050 "MSIpCMSD" */ ++ 0x60,0xA4,0x60,0x5B,0x80,0x44,0x42,0x47, /* 00000058 "`.`[.DBG" */ ++ 0x5F,0x01,0x0B,0x44,0xB0,0x0A,0x04,0x5B, /* 00000060 "_..D...[" */ ++ 0x81,0x0B,0x44,0x42,0x47,0x5F,0x03,0x44, /* 00000068 "..DBG_.D" */ ++ 0x42,0x47,0x4C,0x20,0x10,0x4E,0x25,0x5F, /* 00000070 "BGL .N%_" */ ++ 0x53,0x42,0x5F,0x5B,0x82,0x46,0x25,0x50, /* 00000078 "SB_[.F%P" */ ++ 0x43,0x49,0x30,0x08,0x5F,0x48,0x49,0x44, /* 00000080 "CI0._HID" */ ++ 0x0C,0x41,0xD0,0x0A,0x03,0x08,0x5F,0x41, /* 00000088 ".A...._A" */ ++ 0x44,0x52,0x00,0x08,0x5F,0x55,0x49,0x44, /* 00000090 "DR.._UID" */ ++ 0x01,0x08,0x5F,0x50,0x52,0x54,0x12,0x47, /* 00000098 ".._PRT.G" */ ++ 0x15,0x18,0x12,0x0B,0x04,0x0B,0xFF,0xFF, /* 000000A0 "........" */ ++ 0x00,0x4C,0x4E,0x4B,0x44,0x00,0x12,0x0B, /* 000000A8 ".LNKD..." */ ++ 0x04,0x0B,0xFF,0xFF,0x01,0x4C,0x4E,0x4B, /* 000000B0 ".....LNK" */ ++ 0x41,0x00,0x12,0x0C,0x04,0x0B,0xFF,0xFF, /* 000000B8 "A......." */ ++ 0x0A,0x02,0x4C,0x4E,0x4B,0x42,0x00,0x12, /* 000000C0 "..LNKB.." */ ++ 0x0C,0x04,0x0B,0xFF,0xFF,0x0A,0x03,0x4C, /* 000000C8 ".......L" */ ++ 0x4E,0x4B,0x43,0x00,0x12,0x0D,0x04,0x0C, /* 000000D0 "NKC....." */ ++ 0xFF,0xFF,0x01,0x00,0x00,0x4C,0x4E,0x4B, /* 000000D8 ".....LNK" */ ++ 0x41,0x00,0x12,0x0D,0x04,0x0C,0xFF,0xFF, /* 000000E0 "A......." */ ++ 0x01,0x00,0x01,0x4C,0x4E,0x4B,0x42,0x00, /* 000000E8 "...LNKB." */ ++ 0x12,0x0E,0x04,0x0C,0xFF,0xFF,0x01,0x00, /* 000000F0 "........" */ ++ 0x0A,0x02,0x4C,0x4E,0x4B,0x43,0x00,0x12, /* 000000F8 "..LNKC.." */ ++ 0x0E,0x04,0x0C,0xFF,0xFF,0x01,0x00,0x0A, /* 00000100 "........" */ ++ 0x03,0x4C,0x4E,0x4B,0x44,0x00,0x12,0x0D, /* 00000108 ".LNKD..." */ ++ 0x04,0x0C,0xFF,0xFF,0x02,0x00,0x00,0x4C, /* 00000110 ".......L" */ ++ 0x4E,0x4B,0x42,0x00,0x12,0x0D,0x04,0x0C, /* 00000118 "NKB....." */ ++ 0xFF,0xFF,0x02,0x00,0x01,0x4C,0x4E,0x4B, /* 00000120 ".....LNK" */ ++ 0x43,0x00,0x12,0x0E,0x04,0x0C,0xFF,0xFF, /* 00000128 "C......." */ ++ 0x02,0x00,0x0A,0x02,0x4C,0x4E,0x4B,0x44, /* 00000130 "....LNKD" */ ++ 0x00,0x12,0x0E,0x04,0x0C,0xFF,0xFF,0x02, /* 00000138 "........" */ ++ 0x00,0x0A,0x03,0x4C,0x4E,0x4B,0x41,0x00, /* 00000140 "...LNKA." */ ++ 0x12,0x0D,0x04,0x0C,0xFF,0xFF,0x03,0x00, /* 00000148 "........" */ ++ 0x00,0x4C,0x4E,0x4B,0x43,0x00,0x12,0x0D, /* 00000150 ".LNKC..." */ ++ 0x04,0x0C,0xFF,0xFF,0x03,0x00,0x01,0x4C, /* 00000158 ".......L" */ ++ 0x4E,0x4B,0x44,0x00,0x12,0x0E,0x04,0x0C, /* 00000160 "NKD....." */ ++ 0xFF,0xFF,0x03,0x00,0x0A,0x02,0x4C,0x4E, /* 00000168 "......LN" */ ++ 0x4B,0x41,0x00,0x12,0x0E,0x04,0x0C,0xFF, /* 00000170 "KA......" */ ++ 0xFF,0x03,0x00,0x0A,0x03,0x4C,0x4E,0x4B, /* 00000178 ".....LNK" */ ++ 0x42,0x00,0x12,0x0D,0x04,0x0C,0xFF,0xFF, /* 00000180 "B......." */ ++ 0x04,0x00,0x00,0x4C,0x4E,0x4B,0x44,0x00, /* 00000188 "...LNKD." */ ++ 0x12,0x0D,0x04,0x0C,0xFF,0xFF,0x04,0x00, /* 00000190 "........" */ ++ 0x01,0x4C,0x4E,0x4B,0x41,0x00,0x12,0x0E, /* 00000198 ".LNKA..." */ ++ 0x04,0x0C,0xFF,0xFF,0x04,0x00,0x0A,0x02, /* 000001A0 "........" */ ++ 0x4C,0x4E,0x4B,0x42,0x00,0x12,0x0E,0x04, /* 000001A8 "LNKB...." */ ++ 0x0C,0xFF,0xFF,0x04,0x00,0x0A,0x03,0x4C, /* 000001B0 ".......L" */ ++ 0x4E,0x4B,0x43,0x00,0x12,0x0D,0x04,0x0C, /* 000001B8 "NKC....." */ ++ 0xFF,0xFF,0x05,0x00,0x00,0x4C,0x4E,0x4B, /* 000001C0 ".....LNK" */ ++ 0x41,0x00,0x12,0x0D,0x04,0x0C,0xFF,0xFF, /* 000001C8 "A......." */ ++ 0x05,0x00,0x01,0x4C,0x4E,0x4B,0x42,0x00, /* 000001D0 "...LNKB." */ ++ 0x12,0x0E,0x04,0x0C,0xFF,0xFF,0x05,0x00, /* 000001D8 "........" */ ++ 0x0A,0x02,0x4C,0x4E,0x4B,0x43,0x00,0x12, /* 000001E0 "..LNKC.." */ ++ 0x0E,0x04,0x0C,0xFF,0xFF,0x05,0x00,0x0A, /* 000001E8 "........" */ ++ 0x03,0x4C,0x4E,0x4B,0x44,0x00,0x14,0x4C, /* 000001F0 ".LNKD..L" */ ++ 0x0D,0x5F,0x43,0x52,0x53,0x00,0x08,0x4D, /* 000001F8 "._CRS..M" */ ++ 0x45,0x4D,0x50,0x11,0x42,0x07,0x0A,0x6E, /* 00000200 "EMP.B..n" */ ++ 0x88,0x0D,0x00,0x02,0x0C,0x00,0x00,0x00, /* 00000208 "........" */ ++ 0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x01, /* 00000210 "........" */ ++ 0x47,0x01,0xF8,0x0C,0xF8,0x0C,0x01,0x08, /* 00000218 "G......." */ ++ 0x88,0x0D,0x00,0x01,0x0C,0x03,0x00,0x00, /* 00000220 "........" */ ++ 0x00,0x00,0xF7,0x0C,0x00,0x00,0xF8,0x0C, /* 00000228 "........" */ ++ 0x88,0x0D,0x00,0x01,0x0C,0x03,0x00,0x00, /* 00000230 "........" */ ++ 0x00,0x0D,0xFF,0xFF,0x00,0x00,0x00,0xF3, /* 00000238 "........" */ ++ 0x87,0x17,0x00,0x00,0x0C,0x03,0x00,0x00, /* 00000240 "........" */ ++ 0x00,0x00,0x00,0x00,0x0A,0x00,0xFF,0xFF, /* 00000248 "........" */ ++ 0x0B,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 00000250 "........" */ ++ 0x02,0x00,0x87,0x17,0x00,0x00,0x08,0x01, /* 00000258 "........" */ ++ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 00000260 "........" */ ++ 0xFF,0xFF,0xBF,0xFE,0x00,0x00,0x00,0x00, /* 00000268 "........" */ ++ 0x00,0x00,0x00,0x00,0x79,0x00,0x8A,0x4D, /* 00000270 "....y..M" */ ++ 0x45,0x4D,0x50,0x0A,0x5C,0x50,0x4D,0x49, /* 00000278 "EMP.\PMI" */ ++ 0x4E,0x8A,0x4D,0x45,0x4D,0x50,0x0A,0x60, /* 00000280 "N.MEMP.`" */ ++ 0x50,0x4D,0x41,0x58,0x8A,0x4D,0x45,0x4D, /* 00000288 "PMAX.MEM" */ ++ 0x50,0x0A,0x68,0x50,0x4C,0x45,0x4E,0x72, /* 00000290 "P.hPLENr" */ ++ 0x43,0x4D,0x52,0x44,0x0A,0x34,0x79,0x43, /* 00000298 "CMRD.4yC" */ ++ 0x4D,0x52,0x44,0x0A,0x35,0x0A,0x08,0x00, /* 000002A0 "MRD.5..." */ ++ 0x60,0x79,0x60,0x0A,0x10,0x60,0x72,0x60, /* 000002A8 "`y`..`r`" */ ++ 0x0C,0x00,0x00,0x00,0x01,0x60,0x70,0x60, /* 000002B0 ".....`p`" */ ++ 0x50,0x4D,0x49,0x4E,0x74,0x50,0x4D,0x41, /* 000002B8 "PMINtPMA" */ ++ 0x58,0x50,0x4D,0x49,0x4E,0x50,0x4C,0x45, /* 000002C0 "XPMINPLE" */ ++ 0x4E,0x75,0x50,0x4C,0x45,0x4E,0xA4,0x4D, /* 000002C8 "NuPLEN.M" */ ++ 0x45,0x4D,0x50,0x10,0x42,0x26,0x2E,0x5F, /* 000002D0 "EMP.B&._" */ ++ 0x53,0x42,0x5F,0x50,0x43,0x49,0x30,0x5B, /* 000002D8 "SB_PCI0[" */ ++ 0x82,0x43,0x20,0x49,0x53,0x41,0x5F,0x08, /* 000002E0 ".C ISA_." */ ++ 0x5F,0x41,0x44,0x52,0x0C,0x00,0x00,0x01, /* 000002E8 "_ADR...." */ ++ 0x00,0x5B,0x80,0x50,0x34,0x30,0x43,0x02, /* 000002F0 ".[.P40C." */ ++ 0x0A,0x60,0x0A,0x04,0x5B,0x82,0x44,0x04, /* 000002F8 ".`..[.D." */ ++ 0x4B,0x42,0x44,0x5F,0x08,0x5F,0x48,0x49, /* 00000300 "KBD_._HI" */ ++ 0x44,0x0C,0x41,0xD0,0x03,0x03,0x14,0x09, /* 00000308 "D.A....." */ ++ 0x5F,0x53,0x54,0x41,0x00,0xA4,0x0A,0x0F, /* 00000310 "_STA...." */ ++ 0x14,0x29,0x5F,0x43,0x52,0x53,0x00,0x08, /* 00000318 ".)_CRS.." */ ++ 0x54,0x4D,0x50,0x5F,0x11,0x18,0x0A,0x15, /* 00000320 "TMP_...." */ ++ 0x47,0x01,0x60,0x00,0x60,0x00,0x01,0x01, /* 00000328 "G.`.`..." */ ++ 0x47,0x01,0x64,0x00,0x64,0x00,0x01,0x01, /* 00000330 "G.d.d..." */ ++ 0x22,0x02,0x00,0x79,0x00,0xA4,0x54,0x4D, /* 00000338 ""..y..TM" */ ++ 0x50,0x5F,0x5B,0x82,0x33,0x4D,0x4F,0x55, /* 00000340 "P_[.3MOU" */ ++ 0x5F,0x08,0x5F,0x48,0x49,0x44,0x0C,0x41, /* 00000348 "_._HID.A" */ ++ 0xD0,0x0F,0x13,0x14,0x09,0x5F,0x53,0x54, /* 00000350 "....._ST" */ ++ 0x41,0x00,0xA4,0x0A,0x0F,0x14,0x19,0x5F, /* 00000358 "A......_" */ ++ 0x43,0x52,0x53,0x00,0x08,0x54,0x4D,0x50, /* 00000360 "CRS..TMP" */ ++ 0x5F,0x11,0x08,0x0A,0x05,0x22,0x00,0x10, /* 00000368 "_....".." */ ++ 0x79,0x00,0xA4,0x54,0x4D,0x50,0x5F,0x5B, /* 00000370 "y..TMP_[" */ ++ 0x82,0x47,0x04,0x46,0x44,0x43,0x30,0x08, /* 00000378 ".G.FDC0." */ ++ 0x5F,0x48,0x49,0x44,0x0C,0x41,0xD0,0x07, /* 00000380 "_HID.A.." */ ++ 0x00,0x14,0x09,0x5F,0x53,0x54,0x41,0x00, /* 00000388 "..._STA." */ ++ 0xA4,0x0A,0x0F,0x14,0x2C,0x5F,0x43,0x52, /* 00000390 "....,_CR" */ ++ 0x53,0x00,0x08,0x42,0x55,0x46,0x30,0x11, /* 00000398 "S..BUF0." */ ++ 0x1B,0x0A,0x18,0x47,0x01,0xF2,0x03,0xF2, /* 000003A0 "...G...." */ ++ 0x03,0x00,0x04,0x47,0x01,0xF7,0x03,0xF7, /* 000003A8 "...G...." */ ++ 0x03,0x00,0x01,0x22,0x40,0x00,0x2A,0x04, /* 000003B0 "..."@.*." */ ++ 0x00,0x79,0x00,0xA4,0x42,0x55,0x46,0x30, /* 000003B8 ".y..BUF0" */ ++ 0x5B,0x82,0x4B,0x05,0x4C,0x50,0x54,0x5F, /* 000003C0 "[.K.LPT_" */ ++ 0x08,0x5F,0x48,0x49,0x44,0x0C,0x41,0xD0, /* 000003C8 "._HID.A." */ ++ 0x04,0x00,0x14,0x28,0x5F,0x53,0x54,0x41, /* 000003D0 "...(_STA" */ ++ 0x00,0x70,0x5E,0x5E,0x5E,0x2E,0x50,0x58, /* 000003D8 ".p^^^.PX" */ ++ 0x31,0x33,0x44,0x52,0x53,0x41,0x60,0x7B, /* 000003E0 "13DRSA`{" */ ++ 0x60,0x0C,0x00,0x00,0x00,0x80,0x60,0xA0, /* 000003E8 "`.....`." */ ++ 0x06,0x93,0x60,0x00,0xA4,0x00,0xA1,0x04, /* 000003F0 "..`....." */ ++ 0xA4,0x0A,0x0F,0x14,0x21,0x5F,0x43,0x52, /* 000003F8 "....!_CR" */ ++ 0x53,0x00,0x08,0x42,0x55,0x46,0x30,0x11, /* 00000400 "S..BUF0." */ ++ 0x10,0x0A,0x0D,0x47,0x01,0x78,0x03,0x78, /* 00000408 "...G.x.x" */ ++ 0x03,0x08,0x08,0x22,0x80,0x00,0x79,0x00, /* 00000410 "..."..y." */ ++ 0xA4,0x42,0x55,0x46,0x30,0x5B,0x82,0x41, /* 00000418 ".BUF0[.A" */ ++ 0x06,0x43,0x4F,0x4D,0x31,0x08,0x5F,0x48, /* 00000420 ".COM1._H" */ ++ 0x49,0x44,0x0C,0x41,0xD0,0x05,0x01,0x08, /* 00000428 "ID.A...." */ ++ 0x5F,0x55,0x49,0x44,0x01,0x14,0x28,0x5F, /* 00000430 "_UID..(_" */ ++ 0x53,0x54,0x41,0x00,0x70,0x5E,0x5E,0x5E, /* 00000438 "STA.p^^^" */ ++ 0x2E,0x50,0x58,0x31,0x33,0x44,0x52,0x53, /* 00000440 ".PX13DRS" */ ++ 0x43,0x60,0x7B,0x60,0x0C,0x00,0x00,0x00, /* 00000448 "C`{`...." */ ++ 0x08,0x60,0xA0,0x06,0x93,0x60,0x00,0xA4, /* 00000450 ".`...`.." */ ++ 0x00,0xA1,0x04,0xA4,0x0A,0x0F,0x14,0x21, /* 00000458 ".......!" */ ++ 0x5F,0x43,0x52,0x53,0x00,0x08,0x42,0x55, /* 00000460 "_CRS..BU" */ ++ 0x46,0x30,0x11,0x10,0x0A,0x0D,0x47,0x01, /* 00000468 "F0....G." */ ++ 0xF8,0x03,0xF8,0x03,0x00,0x08,0x22,0x10, /* 00000470 "......"." */ ++ 0x00,0x79,0x00,0xA4,0x42,0x55,0x46,0x30, /* 00000478 ".y..BUF0" */ ++ 0x5B,0x82,0x42,0x06,0x43,0x4F,0x4D,0x32, /* 00000480 "[.B.COM2" */ ++ 0x08,0x5F,0x48,0x49,0x44,0x0C,0x41,0xD0, /* 00000488 "._HID.A." */ ++ 0x05,0x01,0x08,0x5F,0x55,0x49,0x44,0x0A, /* 00000490 "..._UID." */ ++ 0x02,0x14,0x28,0x5F,0x53,0x54,0x41,0x00, /* 00000498 "..(_STA." */ ++ 0x70,0x5E,0x5E,0x5E,0x2E,0x50,0x58,0x31, /* 000004A0 "p^^^.PX1" */ ++ 0x33,0x44,0x52,0x53,0x43,0x60,0x7B,0x60, /* 000004A8 "3DRSC`{`" */ ++ 0x0C,0x00,0x00,0x00,0x80,0x60,0xA0,0x06, /* 000004B0 ".....`.." */ ++ 0x93,0x60,0x00,0xA4,0x00,0xA1,0x04,0xA4, /* 000004B8 ".`......" */ ++ 0x0A,0x0F,0x14,0x21,0x5F,0x43,0x52,0x53, /* 000004C0 "...!_CRS" */ ++ 0x00,0x08,0x42,0x55,0x46,0x30,0x11,0x10, /* 000004C8 "..BUF0.." */ ++ 0x0A,0x0D,0x47,0x01,0xF8,0x02,0xF8,0x02, /* 000004D0 "..G....." */ ++ 0x00,0x08,0x22,0x08,0x00,0x79,0x00,0xA4, /* 000004D8 ".."..y.." */ ++ 0x42,0x55,0x46,0x30,0x5B,0x82,0x40,0x05, /* 000004E0 "BUF0[.@." */ ++ 0x50,0x58,0x31,0x33,0x08,0x5F,0x41,0x44, /* 000004E8 "PX13._AD" */ ++ 0x52,0x0C,0x03,0x00,0x01,0x00,0x5B,0x80, /* 000004F0 "R.....[." */ ++ 0x50,0x31,0x33,0x43,0x02,0x0A,0x5C,0x0A, /* 000004F8 "P13C..\." */ ++ 0x24,0x5B,0x81,0x33,0x50,0x31,0x33,0x43, /* 00000500 "$[.3P13C" */ ++ 0x03,0x44,0x52,0x53,0x41,0x20,0x44,0x52, /* 00000508 ".DRSA DR" */ ++ 0x53,0x42,0x20,0x44,0x52,0x53,0x43,0x20, /* 00000510 "SB DRSC " */ ++ 0x44,0x52,0x53,0x45,0x20,0x44,0x52,0x53, /* 00000518 "DRSE DRS" */ ++ 0x46,0x20,0x44,0x52,0x53,0x47,0x20,0x44, /* 00000520 "F DRSG D" */ ++ 0x52,0x53,0x48,0x20,0x44,0x52,0x53,0x49, /* 00000528 "RSH DRSI" */ ++ 0x20,0x44,0x52,0x53,0x4A,0x20,0x10,0x4F, /* 00000530 " DRSJ .O" */ ++ 0x2E,0x5F,0x53,0x42,0x5F,0x5B,0x81,0x24, /* 00000538 "._SB_[.$" */ ++ 0x2F,0x03,0x50,0x43,0x49,0x30,0x49,0x53, /* 00000540 "/.PCI0IS" */ ++ 0x41,0x5F,0x50,0x34,0x30,0x43,0x01,0x50, /* 00000548 "A_P40C.P" */ ++ 0x52,0x51,0x30,0x08,0x50,0x52,0x51,0x31, /* 00000550 "RQ0.PRQ1" */ ++ 0x08,0x50,0x52,0x51,0x32,0x08,0x50,0x52, /* 00000558 ".PRQ2.PR" */ ++ 0x51,0x33,0x08,0x5B,0x82,0x4E,0x0A,0x4C, /* 00000560 "Q3.[.N.L" */ ++ 0x4E,0x4B,0x41,0x08,0x5F,0x48,0x49,0x44, /* 00000568 "NKA._HID" */ ++ 0x0C,0x41,0xD0,0x0C,0x0F,0x08,0x5F,0x55, /* 00000570 ".A...._U" */ ++ 0x49,0x44,0x01,0x08,0x5F,0x50,0x52,0x53, /* 00000578 "ID.._PRS" */ ++ 0x11,0x09,0x0A,0x06,0x23,0xF8,0x1E,0x18, /* 00000580 "....#..." */ ++ 0x79,0x00,0x14,0x1A,0x5F,0x53,0x54,0x41, /* 00000588 "y..._STA" */ ++ 0x00,0x70,0x0A,0x0B,0x60,0xA0,0x0D,0x7B, /* 00000590 ".p..`..{" */ ++ 0x0A,0x80,0x50,0x52,0x51,0x30,0x61,0x70, /* 00000598 "..PRQ0ap" */ ++ 0x0A,0x09,0x60,0xA4,0x60,0x14,0x11,0x5F, /* 000005A0 "..`.`.._" */ ++ 0x44,0x49,0x53,0x00,0x7D,0x50,0x52,0x51, /* 000005A8 "DIS.}PRQ" */ ++ 0x30,0x0A,0x80,0x50,0x52,0x51,0x30,0x14, /* 000005B0 "0..PRQ0." */ ++ 0x3F,0x5F,0x43,0x52,0x53,0x00,0x08,0x50, /* 000005B8 "?_CRS..P" */ ++ 0x52,0x52,0x30,0x11,0x09,0x0A,0x06,0x23, /* 000005C0 "RR0....#" */ ++ 0x02,0x00,0x18,0x79,0x00,0x8B,0x50,0x52, /* 000005C8 "...y..PR" */ ++ 0x52,0x30,0x01,0x54,0x4D,0x50,0x5F,0x70, /* 000005D0 "R0.TMP_p" */ ++ 0x50,0x52,0x51,0x30,0x60,0xA0,0x0C,0x95, /* 000005D8 "PRQ0`..." */ ++ 0x60,0x0A,0x80,0x79,0x01,0x60,0x54,0x4D, /* 000005E0 "`..y.`TM" */ ++ 0x50,0x5F,0xA1,0x07,0x70,0x00,0x54,0x4D, /* 000005E8 "P_..p.TM" */ ++ 0x50,0x5F,0xA4,0x50,0x52,0x52,0x30,0x14, /* 000005F0 "P_.PRR0." */ ++ 0x1B,0x5F,0x53,0x52,0x53,0x01,0x8B,0x68, /* 000005F8 "._SRS..h" */ ++ 0x01,0x54,0x4D,0x50,0x5F,0x82,0x54,0x4D, /* 00000600 ".TMP_.TM" */ ++ 0x50,0x5F,0x60,0x76,0x60,0x70,0x60,0x50, /* 00000608 "P_`v`p`P" */ ++ 0x52,0x51,0x30,0x5B,0x82,0x4F,0x0A,0x4C, /* 00000610 "RQ0[.O.L" */ ++ 0x4E,0x4B,0x42,0x08,0x5F,0x48,0x49,0x44, /* 00000618 "NKB._HID" */ ++ 0x0C,0x41,0xD0,0x0C,0x0F,0x08,0x5F,0x55, /* 00000620 ".A...._U" */ ++ 0x49,0x44,0x0A,0x02,0x08,0x5F,0x50,0x52, /* 00000628 "ID..._PR" */ ++ 0x53,0x11,0x09,0x0A,0x06,0x23,0xF8,0x1E, /* 00000630 "S....#.." */ ++ 0x18,0x79,0x00,0x14,0x1A,0x5F,0x53,0x54, /* 00000638 ".y..._ST" */ ++ 0x41,0x00,0x70,0x0A,0x0B,0x60,0xA0,0x0D, /* 00000640 "A.p..`.." */ ++ 0x7B,0x0A,0x80,0x50,0x52,0x51,0x31,0x61, /* 00000648 "{..PRQ1a" */ ++ 0x70,0x0A,0x09,0x60,0xA4,0x60,0x14,0x11, /* 00000650 "p..`.`.." */ ++ 0x5F,0x44,0x49,0x53,0x00,0x7D,0x50,0x52, /* 00000658 "_DIS.}PR" */ ++ 0x51,0x31,0x0A,0x80,0x50,0x52,0x51,0x31, /* 00000660 "Q1..PRQ1" */ ++ 0x14,0x3F,0x5F,0x43,0x52,0x53,0x00,0x08, /* 00000668 ".?_CRS.." */ ++ 0x50,0x52,0x52,0x30,0x11,0x09,0x0A,0x06, /* 00000670 "PRR0...." */ ++ 0x23,0x02,0x00,0x18,0x79,0x00,0x8B,0x50, /* 00000678 "#...y..P" */ ++ 0x52,0x52,0x30,0x01,0x54,0x4D,0x50,0x5F, /* 00000680 "RR0.TMP_" */ ++ 0x70,0x50,0x52,0x51,0x31,0x60,0xA0,0x0C, /* 00000688 "pPRQ1`.." */ ++ 0x95,0x60,0x0A,0x80,0x79,0x01,0x60,0x54, /* 00000690 ".`..y.`T" */ ++ 0x4D,0x50,0x5F,0xA1,0x07,0x70,0x00,0x54, /* 00000698 "MP_..p.T" */ ++ 0x4D,0x50,0x5F,0xA4,0x50,0x52,0x52,0x30, /* 000006A0 "MP_.PRR0" */ ++ 0x14,0x1B,0x5F,0x53,0x52,0x53,0x01,0x8B, /* 000006A8 ".._SRS.." */ ++ 0x68,0x01,0x54,0x4D,0x50,0x5F,0x82,0x54, /* 000006B0 "h.TMP_.T" */ ++ 0x4D,0x50,0x5F,0x60,0x76,0x60,0x70,0x60, /* 000006B8 "MP_`v`p`" */ ++ 0x50,0x52,0x51,0x31,0x5B,0x82,0x4F,0x0A, /* 000006C0 "PRQ1[.O." */ ++ 0x4C,0x4E,0x4B,0x43,0x08,0x5F,0x48,0x49, /* 000006C8 "LNKC._HI" */ ++ 0x44,0x0C,0x41,0xD0,0x0C,0x0F,0x08,0x5F, /* 000006D0 "D.A...._" */ ++ 0x55,0x49,0x44,0x0A,0x03,0x08,0x5F,0x50, /* 000006D8 "UID..._P" */ ++ 0x52,0x53,0x11,0x09,0x0A,0x06,0x23,0xF8, /* 000006E0 "RS....#." */ ++ 0x1E,0x18,0x79,0x00,0x14,0x1A,0x5F,0x53, /* 000006E8 "..y..._S" */ ++ 0x54,0x41,0x00,0x70,0x0A,0x0B,0x60,0xA0, /* 000006F0 "TA.p..`." */ ++ 0x0D,0x7B,0x0A,0x80,0x50,0x52,0x51,0x32, /* 000006F8 ".{..PRQ2" */ ++ 0x61,0x70,0x0A,0x09,0x60,0xA4,0x60,0x14, /* 00000700 "ap..`.`." */ ++ 0x11,0x5F,0x44,0x49,0x53,0x00,0x7D,0x50, /* 00000708 "._DIS.}P" */ ++ 0x52,0x51,0x32,0x0A,0x80,0x50,0x52,0x51, /* 00000710 "RQ2..PRQ" */ ++ 0x32,0x14,0x3F,0x5F,0x43,0x52,0x53,0x00, /* 00000718 "2.?_CRS." */ ++ 0x08,0x50,0x52,0x52,0x30,0x11,0x09,0x0A, /* 00000720 ".PRR0..." */ ++ 0x06,0x23,0x02,0x00,0x18,0x79,0x00,0x8B, /* 00000728 ".#...y.." */ ++ 0x50,0x52,0x52,0x30,0x01,0x54,0x4D,0x50, /* 00000730 "PRR0.TMP" */ ++ 0x5F,0x70,0x50,0x52,0x51,0x32,0x60,0xA0, /* 00000738 "_pPRQ2`." */ ++ 0x0C,0x95,0x60,0x0A,0x80,0x79,0x01,0x60, /* 00000740 "..`..y.`" */ ++ 0x54,0x4D,0x50,0x5F,0xA1,0x07,0x70,0x00, /* 00000748 "TMP_..p." */ ++ 0x54,0x4D,0x50,0x5F,0xA4,0x50,0x52,0x52, /* 00000750 "TMP_.PRR" */ ++ 0x30,0x14,0x1B,0x5F,0x53,0x52,0x53,0x01, /* 00000758 "0.._SRS." */ ++ 0x8B,0x68,0x01,0x54,0x4D,0x50,0x5F,0x82, /* 00000760 ".h.TMP_." */ ++ 0x54,0x4D,0x50,0x5F,0x60,0x76,0x60,0x70, /* 00000768 "TMP_`v`p" */ ++ 0x60,0x50,0x52,0x51,0x32,0x5B,0x82,0x4F, /* 00000770 "`PRQ2[.O" */ ++ 0x0A,0x4C,0x4E,0x4B,0x44,0x08,0x5F,0x48, /* 00000778 ".LNKD._H" */ ++ 0x49,0x44,0x0C,0x41,0xD0,0x0C,0x0F,0x08, /* 00000780 "ID.A...." */ ++ 0x5F,0x55,0x49,0x44,0x0A,0x04,0x08,0x5F, /* 00000788 "_UID..._" */ ++ 0x50,0x52,0x53,0x11,0x09,0x0A,0x06,0x23, /* 00000790 "PRS....#" */ ++ 0xF8,0x1E,0x18,0x79,0x00,0x14,0x1A,0x5F, /* 00000798 "...y..._" */ ++ 0x53,0x54,0x41,0x00,0x70,0x0A,0x0B,0x60, /* 000007A0 "STA.p..`" */ ++ 0xA0,0x0D,0x7B,0x0A,0x80,0x50,0x52,0x51, /* 000007A8 "..{..PRQ" */ ++ 0x33,0x61,0x70,0x0A,0x09,0x60,0xA4,0x60, /* 000007B0 "3ap..`.`" */ ++ 0x14,0x11,0x5F,0x44,0x49,0x53,0x00,0x7D, /* 000007B8 ".._DIS.}" */ ++ 0x50,0x52,0x51,0x33,0x0A,0x80,0x50,0x52, /* 000007C0 "PRQ3..PR" */ ++ 0x51,0x33,0x14,0x3F,0x5F,0x43,0x52,0x53, /* 000007C8 "Q3.?_CRS" */ ++ 0x00,0x08,0x50,0x52,0x52,0x30,0x11,0x09, /* 000007D0 "..PRR0.." */ ++ 0x0A,0x06,0x23,0x02,0x00,0x18,0x79,0x00, /* 000007D8 "..#...y." */ ++ 0x8B,0x50,0x52,0x52,0x30,0x01,0x54,0x4D, /* 000007E0 ".PRR0.TM" */ ++ 0x50,0x5F,0x70,0x50,0x52,0x51,0x33,0x60, /* 000007E8 "P_pPRQ3`" */ ++ 0xA0,0x0C,0x95,0x60,0x0A,0x80,0x79,0x01, /* 000007F0 "...`..y." */ ++ 0x60,0x54,0x4D,0x50,0x5F,0xA1,0x07,0x70, /* 000007F8 "`TMP_..p" */ ++ 0x00,0x54,0x4D,0x50,0x5F,0xA4,0x50,0x52, /* 00000800 ".TMP_.PR" */ ++ 0x52,0x30,0x14,0x1B,0x5F,0x53,0x52,0x53, /* 00000808 "R0.._SRS" */ ++ 0x01,0x8B,0x68,0x01,0x54,0x4D,0x50,0x5F, /* 00000810 "..h.TMP_" */ ++ 0x82,0x54,0x4D,0x50,0x5F,0x60,0x76,0x60, /* 00000818 ".TMP_`v`" */ ++ 0x70,0x60,0x50,0x52,0x51,0x33,0x08,0x5F, /* 00000820 "p`PRQ3._" */ ++ 0x53,0x35,0x5F,0x12,0x06,0x04,0x00,0x00, /* 00000828 "S5_....." */ ++ 0x00,0x00, ++}; +Binary files bios/BIOS-bochs-latest and bios.new/BIOS-bochs-latest differ +diff -ruN --exclude Makefile bios/Makefile.in bios.new/Makefile.in +--- bios/Makefile.in 2006-01-13 18:36:27.000000000 +0100 ++++ bios.new/Makefile.in 2006-09-24 20:26:39.000000000 +0200 +@@ -61,7 +61,8 @@ -Index: rombios.c -=================================================================== -RCS file: /cvsroot/bochs/bochs/bios/rombios.c,v -retrieving revision 1.160 -diff -u -w -r1.160 rombios.c ---- rombios.c 25 Jan 2006 17:51:49 -0000 1.160 -+++ rombios.c 3 May 2006 21:22:48 -0000 -@@ -1816,6 +1816,7 @@ - { - printf(BX_APPNAME" BIOS - build: %s\n%s\nOptions: ", - BIOS_BUILD_DATE, bios_cvs_version_string); + clean: + @RMCOMMAND@ *.o *.a *.s _rombios*_.c rombios*.txt rombios*.sym +- @RMCOMMAND@ usage biossums ++ @RMCOMMAND@ usage biossums rombios16.bin ++ @RMCOMMAND@ rombios32.bin rombios32.out pad tmp32.bin + + dist-clean: clean + @RMCOMMAND@ Makefile +@@ -69,15 +70,35 @@ + bios-clean: + @RMCOMMAND@ BIOS-bochs-* + +-BIOS-bochs-latest: rombios.c apmbios.S biossums ++rombios16.bin: rombios.c apmbios.S biossums + $(GCC) $(BIOS_BUILD_DATE) -E -P $< > _rombios_.c + $(BCC) -o rombios.s -C-c -D__i86__ -0 -S _rombios_.c + sed -e 's/^\.text//' -e 's/^\.data//' rombios.s > _rombios_.s + $(AS86) _rombios_.s -b tmp.bin -u- -w- -g -0 -j -O -l rombios.txt + -perl ${srcdir}/makesym.perl < rombios.txt > rombios.sym +- mv tmp.bin BIOS-bochs-latest +- ./biossums BIOS-bochs-latest ++ mv tmp.bin rombios16.bin ++ ./biossums rombios16.bin + rm -f _rombios_.s + ++ ++rombios32.bin: rombios32.out pad ++ objcopy -O binary $< tmp32.bin ++ ./pad < tmp32.bin > $@ 65536 0xff ++ ++rombios32.out: rombios32start.o rombios32.o rombios32.ld ++ ld -o $@ -T rombios32.ld rombios32start.o rombios32.o ++ ++rombios32.o: rombios32.c ++ $(GCC) -O2 -Wall -c -o $@ $< ++ ++rombios32start.o: rombios32start.S ++ $(GCC) -c -o $@ $< ++ ++BIOS-bochs-latest: rombios16.bin rombios32.bin ++ cat rombios32.bin rombios16.bin > $@ ++ ++pad: pad.c ++ $(GCC) -o $@ $< ++ + biossums: biossums.c + $(GCC) -o biossums biossums.c +diff -ruN --exclude Makefile bios/pad.c bios.new/pad.c +--- bios/pad.c 1970-01-01 01:00:00.000000000 +0100 ++++ bios.new/pad.c 2006-09-24 20:22:58.000000000 +0200 +@@ -0,0 +1,20 @@ ++#include <stdlib.h> ++#include <stdio.h> ++ ++int main(int argc, char **argv) ++{ ++ int len, val, i, c; ++ ++ len = strtol(argv[1], NULL, 0); ++ val = strtol(argv[2], NULL, 0); ++ for(i = 0 ; i < len; i++) { ++ c = getchar(); ++ if (c == EOF) ++ break; ++ putchar(c); ++ } ++ for( ; i < len; i++) { ++ putchar(val); ++ } ++ return 0; ++} +diff -ruN --exclude Makefile bios/rombios32.c bios.new/rombios32.c +--- bios/rombios32.c 1970-01-01 01:00:00.000000000 +0100 ++++ bios.new/rombios32.c 2006-09-24 20:22:58.000000000 +0200 +@@ -0,0 +1,1324 @@ ++// 32 bit Bochs BIOS init code ++// Copyright (C) 2006 Fabrice Bellard ++// ++// This library is free software; you can redistribute it and/or ++// modify it under the terms of the GNU Lesser General Public ++// License as published by the Free Software Foundation; either ++// version 2 of the License, or (at your option) any later version. ++// ++// This library is distributed in the hope that it will be useful, ++// but WITHOUT ANY WARRANTY; without even the implied warranty of ++// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++// Lesser General Public License for more details. ++// ++// You should have received a copy of the GNU Lesser General Public ++// License along with this library; if not, write to the Free Software ++// Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ++#include <stdarg.h> ++#include <stddef.h> ++ ++typedef signed char int8_t; ++typedef short int16_t; ++typedef int int32_t; ++typedef long long int64_t; ++typedef unsigned char uint8_t; ++typedef unsigned short uint16_t; ++typedef unsigned int uint32_t; ++typedef unsigned long long uint64_t; ++ ++/* if true, put the MP float table and ACPI RSDT in EBDA and the MP ++ table in RAM. Unfortunately, Linux has bugs with that, so we prefer ++ to modify the BIOS in shadow RAM */ ++//#define BX_USE_EBDA_TABLES ++ ++/* define it if the (emulated) hardware supports SMM mode */ ++#define BX_USE_SMM ++ ++#define BX_INFO(fmt, args...) bios_printf(0, fmt, ## args); ++ ++#define INFO_PORT 0x402 ++ ++#define cpuid(index, eax, ebx, ecx, edx) \ ++ asm volatile ("cpuid" \ ++ : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) \ ++ : "0" (index)) ++ ++#define CPUID_APIC (1 << 9) ++ ++#define APIC_BASE ((uint8_t *)0xfee00000) ++#define APIC_ICR_LOW 0x300 ++#define APIC_SVR 0x0F0 ++#define APIC_ID 0x020 ++#define APIC_LVT3 0x370 ++ ++#define APIC_ENABLED 0x0100 ++ ++#define CPU_COUNT_ADDR 0xf000 ++#define AP_BOOT_ADDR 0x10000 ++ ++#define MPTABLE_MAX_SIZE 0x00002000 ++#define ACPI_DATA_SIZE 0x00010000 ++#define SMI_CMD_IO_ADDR 0xb2 ++#define PM_IO_BASE 0xb000 ++ ++#define BIOS_TMP_STORAGE 0x00030000 /* 64 KB used to copy the BIOS to shadow RAM */ ++ ++static inline void outl(int addr, int val) ++{ ++ asm volatile ("outl %1, %w0" : : "d" (addr), "a" (val)); ++} ++ ++static inline void outw(int addr, int val) ++{ ++ asm volatile ("outw %w1, %w0" : : "d" (addr), "a" (val)); ++} ++ ++static inline void outb(int addr, int val) ++{ ++ asm volatile ("outb %b1, %w0" : : "d" (addr), "a" (val)); ++} ++ ++static inline uint32_t inl(int addr) ++{ ++ uint32_t val; ++ asm volatile ("inl %w1, %0" : "=a" (val) : "d" (addr)); ++ return val; ++} ++ ++static inline uint16_t inw(int addr) ++{ ++ uint16_t val; ++ asm volatile ("inw %w1, %w0" : "=a" (val) : "d" (addr)); ++ return val; ++} ++ ++static inline uint8_t inb(int addr) ++{ ++ uint8_t val; ++ asm volatile ("inb %w1, %b0" : "=a" (val) : "d" (addr)); ++ return val; ++} ++ ++static inline void writel(void *addr, uint32_t val) ++{ ++ *(volatile uint32_t *)addr = val; ++} ++ ++static inline void writew(void *addr, uint16_t val) ++{ ++ *(volatile uint16_t *)addr = val; ++} ++ ++static inline void writeb(void *addr, uint8_t val) ++{ ++ *(volatile uint8_t *)addr = val; ++} ++ ++static inline uint32_t readl(const void *addr) ++{ ++ return *(volatile const uint32_t *)addr; ++} ++ ++static inline uint16_t readw(const void *addr) ++{ ++ return *(volatile const uint16_t *)addr; ++} ++ ++static inline uint8_t readb(const void *addr) ++{ ++ return *(volatile const uint8_t *)addr; ++} ++ ++static inline void putc(int c) ++{ ++ outb(INFO_PORT, c); ++} ++ ++static inline int isdigit(int c) ++{ ++ return c >= '0' && c <= '9'; ++} ++ ++void *memset(void *d1, int val, size_t len) ++{ ++ uint8_t *d = d1; ++ ++ while (len--) { ++ *d++ = val; ++ } ++ return d1; ++} ++ ++void *memcpy(void *d1, const void *s1, size_t len) ++{ ++ uint8_t *d = d1; ++ const uint8_t *s = s1; ++ ++ while (len--) { ++ *d++ = *s++; ++ } ++ return d1; ++} ++ ++void *memmove(void *d1, const void *s1, size_t len) ++{ ++ uint8_t *d = d1; ++ const uint8_t *s = s1; ++ ++ if (d <= s) { ++ while (len--) { ++ *d++ = *s++; ++ } ++ } else { ++ d += len; ++ s += len; ++ while (len--) { ++ *--d = *--s; ++ } ++ } ++ return d1; ++} ++ ++size_t strlen(const char *s) ++{ ++ const char *s1; ++ for(s1 = s; *s1 != '\0'; s1++); ++ return s1 - s; ++} ++ ++/* from BSD ppp sources */ ++int vsnprintf(char *buf, int buflen, const char *fmt, va_list args) ++{ ++ int c, i, n; ++ int width, prec, fillch; ++ int base, len, neg; ++ unsigned long val = 0; ++ const char *f; ++ char *str, *buf0; ++ char num[32]; ++ static const char hexchars[] = "0123456789abcdef"; ++ ++ buf0 = buf; ++ --buflen; ++ while (buflen > 0) { ++ for (f = fmt; *f != '%' && *f != 0; ++f) ++ ; ++ if (f > fmt) { ++ len = f - fmt; ++ if (len > buflen) ++ len = buflen; ++ memcpy(buf, fmt, len); ++ buf += len; ++ buflen -= len; ++ fmt = f; ++ } ++ if (*fmt == 0) ++ break; ++ c = *++fmt; ++ width = prec = 0; ++ fillch = ' '; ++ if (c == '0') { ++ fillch = '0'; ++ c = *++fmt; ++ } ++ if (c == '*') { ++ width = va_arg(args, int); ++ c = *++fmt; ++ } else { ++ while (isdigit(c)) { ++ width = width * 10 + c - '0'; ++ c = *++fmt; ++ } ++ } ++ if (c == '.') { ++ c = *++fmt; ++ if (c == '*') { ++ prec = va_arg(args, int); ++ c = *++fmt; ++ } else { ++ while (isdigit(c)) { ++ prec = prec * 10 + c - '0'; ++ c = *++fmt; ++ } ++ } ++ } ++ /* modifiers */ ++ switch(c) { ++ case 'l': ++ c = *++fmt; ++ break; ++ default: ++ break; ++ } ++ str = 0; ++ base = 0; ++ neg = 0; ++ ++fmt; ++ switch (c) { ++ case 'd': ++ i = va_arg(args, int); ++ if (i < 0) { ++ neg = 1; ++ val = -i; ++ } else ++ val = i; ++ base = 10; ++ break; ++ case 'o': ++ val = va_arg(args, unsigned int); ++ base = 8; ++ break; ++ case 'x': ++ case 'X': ++ val = va_arg(args, unsigned int); ++ base = 16; ++ break; ++ case 'p': ++ val = (unsigned long) va_arg(args, void *); ++ base = 16; ++ neg = 2; ++ break; ++ case 's': ++ str = va_arg(args, char *); ++ break; ++ case 'c': ++ num[0] = va_arg(args, int); ++ num[1] = 0; ++ str = num; ++ break; ++ default: ++ *buf++ = '%'; ++ if (c != '%') ++ --fmt; /* so %z outputs %z etc. */ ++ --buflen; ++ continue; ++ } ++ if (base != 0) { ++ str = num + sizeof(num); ++ *--str = 0; ++ while (str > num + neg) { ++ *--str = hexchars[val % base]; ++ val = val / base; ++ if (--prec <= 0 && val == 0) ++ break; ++ } ++ switch (neg) { ++ case 1: ++ *--str = '-'; ++ break; ++ case 2: ++ *--str = 'x'; ++ *--str = '0'; ++ break; ++ } ++ len = num + sizeof(num) - 1 - str; ++ } else { ++ len = strlen(str); ++ if (prec > 0 && len > prec) ++ len = prec; ++ } ++ if (width > 0) { ++ if (width > buflen) ++ width = buflen; ++ if ((n = width - len) > 0) { ++ buflen -= n; ++ for (; n > 0; --n) ++ *buf++ = fillch; ++ } ++ } ++ if (len > buflen) ++ len = buflen; ++ memcpy(buf, str, len); ++ buf += len; ++ buflen -= len; ++ } ++ *buf = 0; ++ return buf - buf0; ++} ++ ++void bios_printf(int flags, const char *fmt, ...) ++{ ++ va_list ap; ++ char buf[1024]; ++ const char *s; ++ ++ va_start(ap, fmt); ++ vsnprintf(buf, sizeof(buf), fmt, ap); ++ s = buf; ++ while (*s) ++ putc(*s++); ++ va_end(ap); ++} ++ ++/* approximative ! */ ++void delay_ms(int n) ++{ ++ int i, j; ++ for(i = 0; i < n; i++) { ++ for(j = 0; j < 1000000; j++); ++ } ++} ++ ++int smp_cpus; ++uint32_t cpuid_features; ++uint32_t cpuid_ext_features; ++unsigned long ram_size; ++#ifdef BX_USE_EBDA_TABLES ++unsigned long ebda_cur_addr; ++#endif ++int acpi_enabled; ++uint32_t pm_io_base; ++int pm_sci_int; ++unsigned long bios_table_cur_addr; ++unsigned long bios_table_end_addr; ++ ++void cpu_probe(void) ++{ ++ uint32_t eax, ebx, ecx, edx; ++ cpuid(1, eax, ebx, ecx, edx); ++ cpuid_features = edx; ++ cpuid_ext_features = ecx; ++} ++ ++static int cmos_readb(int addr) ++{ ++ outb(0x70, addr); ++ return inb(0x71); ++} ++ ++void ram_probe(void) ++{ ++ ram_size = (cmos_readb(0x34) | (cmos_readb(0x35) << 8)) * 65536 + ++ 16 * 1024 * 1024; ++#ifdef BX_USE_EBDA_TABLES ++ ebda_cur_addr = ((*(uint16_t *)(0x40e)) << 4) + 0x380; ++#endif ++ BX_INFO("ram_size=0x%08lx\n"); ++} ++ ++/****************************************************/ ++/* SMP probe */ ++ ++extern uint8_t smp_ap_boot_code_start; ++extern uint8_t smp_ap_boot_code_end; ++ ++/* find the number of CPUs by launching a SIPI to them */ ++void smp_probe(void) ++{ ++ uint32_t val, sipi_vector; ++ ++ smp_cpus = 1; ++ if (cpuid_features & CPUID_APIC) { ++ ++ /* enable local APIC */ ++ val = readl(APIC_BASE + APIC_SVR); ++ val |= APIC_ENABLED; ++ writel(APIC_BASE + APIC_SVR, val); ++ ++ writew((void *)CPU_COUNT_ADDR, 1); ++ /* copy AP boot code */ ++ memcpy((void *)AP_BOOT_ADDR, &smp_ap_boot_code_start, ++ &smp_ap_boot_code_end - &smp_ap_boot_code_start); ++ ++ /* broadcast SIPI */ ++ writel(APIC_BASE + APIC_ICR_LOW, 0x000C4500); ++ sipi_vector = AP_BOOT_ADDR >> 12; ++ writel(APIC_BASE + APIC_ICR_LOW, 0x000C4600 | sipi_vector); ++ ++ delay_ms(10); ++ ++ smp_cpus = readw((void *)CPU_COUNT_ADDR); ++ } ++ BX_INFO("Found %d cpus\n", smp_cpus); ++} ++ ++/****************************************************/ ++/* PCI init */ ++ ++#define PCI_ADDRESS_SPACE_MEM 0x00 ++#define PCI_ADDRESS_SPACE_IO 0x01 ++#define PCI_ADDRESS_SPACE_MEM_PREFETCH 0x08 ++ ++#define PCI_ROM_SLOT 6 ++#define PCI_NUM_REGIONS 7 ++ ++#define PCI_DEVICES_MAX 64 ++ ++#define PCI_VENDOR_ID 0x00 /* 16 bits */ ++#define PCI_DEVICE_ID 0x02 /* 16 bits */ ++#define PCI_COMMAND 0x04 /* 16 bits */ ++#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ ++#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ ++#define PCI_CLASS_DEVICE 0x0a /* Device class */ ++#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ ++#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ ++#define PCI_MIN_GNT 0x3e /* 8 bits */ ++#define PCI_MAX_LAT 0x3f /* 8 bits */ ++ ++typedef struct PCIDevice { ++ int bus; ++ int devfn; ++} PCIDevice; ++ ++static uint32_t pci_bios_io_addr; ++static uint32_t pci_bios_mem_addr; ++/* host irqs corresponding to PCI irqs A-D */ ++static uint8_t pci_irqs[4] = { 11, 9, 11, 9 }; ++static PCIDevice i440_pcidev; ++ ++static void pci_config_writel(PCIDevice *d, uint32_t addr, uint32_t val) ++{ ++ outl(0xcf8, 0x80000000 | (d->bus << 16) | (d->devfn << 8) | (addr & 0xfc)); ++ outl(0xcfc, val); ++} ++ ++static void pci_config_writew(PCIDevice *d, uint32_t addr, uint32_t val) ++{ ++ outl(0xcf8, 0x80000000 | (d->bus << 16) | (d->devfn << 8) | (addr & 0xfc)); ++ outw(0xcfc + (addr & 2), val); ++} ++ ++static void pci_config_writeb(PCIDevice *d, uint32_t addr, uint32_t val) ++{ ++ outl(0xcf8, 0x80000000 | (d->bus << 16) | (d->devfn << 8) | (addr & 0xfc)); ++ outb(0xcfc + (addr & 3), val); ++} ++ ++static uint32_t pci_config_readl(PCIDevice *d, uint32_t addr) ++{ ++ outl(0xcf8, 0x80000000 | (d->bus << 16) | (d->devfn << 8) | (addr & 0xfc)); ++ return inl(0xcfc); ++} ++ ++static uint32_t pci_config_readw(PCIDevice *d, uint32_t addr) ++{ ++ outl(0xcf8, 0x80000000 | (d->bus << 16) | (d->devfn << 8) | (addr & 0xfc)); ++ return inw(0xcfc + (addr & 2)); ++} ++ ++static uint32_t pci_config_readb(PCIDevice *d, uint32_t addr) ++{ ++ outl(0xcf8, 0x80000000 | (d->bus << 16) | (d->devfn << 8) | (addr & 0xfc)); ++ return inb(0xcfc + (addr & 3)); ++} ++ ++static void pci_set_io_region_addr(PCIDevice *d, int region_num, uint32_t addr) ++{ ++ uint16_t cmd; ++ uint32_t ofs, old_addr; ++ ++ if ( region_num == PCI_ROM_SLOT ) { ++ ofs = 0x30; ++ }else{ ++ ofs = 0x10 + region_num * 4; ++ } ++ ++ old_addr = pci_config_readl(d, ofs); ++ ++ pci_config_writel(d, ofs, addr); ++ BX_INFO("region %d: 0x%08x\n", region_num, addr); ++ ++ /* enable memory mappings */ ++ cmd = pci_config_readw(d, PCI_COMMAND); ++ if ( region_num == PCI_ROM_SLOT ) ++ cmd |= 2; ++ else if (old_addr & PCI_ADDRESS_SPACE_IO) ++ cmd |= 1; ++ else ++ cmd |= 2; ++ pci_config_writew(d, PCI_COMMAND, cmd); ++} ++ ++/* return the global irq number corresponding to a given device irq ++ pin. We could also use the bus number to have a more precise ++ mapping. */ ++static int pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num) ++{ ++ int slot_addend; ++ slot_addend = (pci_dev->devfn >> 3) - 1; ++ return (irq_num + slot_addend) & 3; ++} ++ ++static int find_bios_table_area(void) ++{ ++ unsigned long addr; ++ for(addr = 0xf0000; addr < 0x100000; addr += 16) { ++ if (*(uint32_t *)addr == 0xaafb4442) { ++ bios_table_cur_addr = addr + 8; ++ bios_table_end_addr = bios_table_cur_addr + *(uint32_t *)(addr + 4); ++ BX_INFO("bios_table_addr: 0x%08lx end=0x%08lx\n", ++ bios_table_cur_addr, bios_table_end_addr); ++ return 0; ++ } ++ } ++ return -1; ++} ++ ++static void bios_shadow_init(PCIDevice *d) ++{ ++ int v; ++ ++ if (find_bios_table_area() < 0) ++ return; ++ ++ /* remap the BIOS to shadow RAM an keep it read/write while we ++ are writing tables */ ++ memcpy((void *)BIOS_TMP_STORAGE, (void *)0x000f0000, 0x10000); ++ v = pci_config_readb(d, 0x67); ++ v = (v & 0x0f) | (0x30); ++ pci_config_writeb(d, 0x67, v); ++ memcpy((void *)0x000f0000, (void *)BIOS_TMP_STORAGE, 0x10000); ++ ++ i440_pcidev = *d; ++} ++ ++static void bios_lock_shadow_ram(void) ++{ ++ PCIDevice *d = &i440_pcidev; ++ int v; ++ ++ v = pci_config_readb(d, 0x67); ++ v = (v & 0x0f) | (0x20); ++ pci_config_writeb(d, 0x67, v); ++} ++ ++static void pci_bios_init_bridges(PCIDevice *d) ++{ ++ uint16_t vendor_id, device_id; ++ ++ vendor_id = pci_config_readw(d, PCI_VENDOR_ID); ++ device_id = pci_config_readw(d, PCI_DEVICE_ID); ++ ++ if (vendor_id == 0x8086 && device_id == 0x7000) { ++ int i, irq; ++ uint8_t elcr[2]; ++ ++ /* PIIX3 bridge */ ++ ++ elcr[0] = 0x00; ++ elcr[1] = 0x00; ++ for(i = 0; i < 4; i++) { ++ irq = pci_irqs[i]; ++ /* set to trigger level */ ++ elcr[irq >> 3] |= (1 << (irq & 7)); ++ /* activate irq remapping in PIIX */ ++ pci_config_writeb(d, 0x60 + i, irq); ++ } ++ outb(0x4d0, elcr[0]); ++ outb(0x4d1, elcr[1]); ++ BX_INFO("PIIX3 init: elcr=%02x %02x\n", ++ elcr[0], elcr[1]); ++ } else if (vendor_id == 0x8086 && device_id == 0x1237) { ++ /* i440 PCI bridge */ ++ bios_shadow_init(d); ++ } ++} ++ ++extern uint8_t smm_relocation_start, smm_relocation_end; ++extern uint8_t smm_code_start, smm_code_end; ++ ++#ifdef BX_USE_SMM ++static void smm_init(void) ++{ ++ /* copy the SMM relocation code */ ++ memcpy((void *)0x38000, &smm_relocation_start, ++ &smm_relocation_end - &smm_relocation_start); ++ /* raise an SMI interrupt */ ++ outb(0xb2, 00); ++ ++ /* enable the SMM memory window */ ++ pci_config_writel(&i440_pcidev, 0x6c, (1 << 26) | 0x000a); ++ ++ /* copy the SMM code */ ++ memcpy((void *)0xa8000, &smm_code_start, ++ &smm_code_end - &smm_code_start); ++ ++ /* close the SMM memory window and enable normal SMM */ ++ pci_config_writel(&i440_pcidev, 0x6c, (1 << 31) | 0x000a); ++} ++#endif ++ ++static void pci_bios_init_device(PCIDevice *d) ++{ ++ int class; ++ uint32_t *paddr; ++ int i, pin, pic_irq, vendor_id, device_id; ++ ++ class = pci_config_readw(d, PCI_CLASS_DEVICE); ++ vendor_id = pci_config_readw(d, PCI_VENDOR_ID); ++ device_id = pci_config_readw(d, PCI_DEVICE_ID); ++ BX_INFO("PCI: bus=%d devfn=0x%02x: vendor_id=0x%04x device_id=0x%04x\n", ++ d->bus, d->devfn, vendor_id, device_id); ++ switch(class) { ++ case 0x0101: ++ if (vendor_id == 0x8086 && device_id == 0x7010) { ++ /* PIIX3 IDE */ ++ pci_config_writew(d, 0x40, 0x8000); // enable IDE0 ++ pci_config_writew(d, 0x42, 0x8000); // enable IDE1 ++ goto default_map; ++ } else { ++ /* IDE: we map it as in ISA mode */ ++ pci_set_io_region_addr(d, 0, 0x1f0); ++ pci_set_io_region_addr(d, 1, 0x3f4); ++ pci_set_io_region_addr(d, 2, 0x170); ++ pci_set_io_region_addr(d, 3, 0x374); ++ } ++ break; ++ case 0x0300: ++ if (vendor_id != 0x1234) ++ goto default_map; ++ /* VGA: map frame buffer to default Bochs VBE address */ ++ pci_set_io_region_addr(d, 0, 0xE0000000); ++ break; ++ case 0x0800: ++ /* PIC */ ++ if (vendor_id == 0x1014) { ++ /* IBM */ ++ if (device_id == 0x0046 || device_id == 0xFFFF) { ++ /* MPIC & MPIC2 */ ++ pci_set_io_region_addr(d, 0, 0x80800000 + 0x00040000); ++ } ++ } ++ break; ++ case 0xff00: ++ if (vendor_id == 0x0106b && ++ (device_id == 0x0017 || device_id == 0x0022)) { ++ /* macio bridge */ ++ pci_set_io_region_addr(d, 0, 0x80800000); ++ } ++ break; ++ default: ++ default_map: ++ /* default memory mappings */ ++ for(i = 0; i < PCI_NUM_REGIONS; i++) { ++ int ofs; ++ uint32_t val, size ; ++ ++ if (i == PCI_ROM_SLOT) ++ ofs = 0x30; ++ else ++ ofs = 0x10 + i * 4; ++ pci_config_writel(d, ofs, 0xffffffff); ++ val = pci_config_readl(d, ofs); ++ if (val != 0) { ++ size = (~(val & ~0xf)) + 1; ++ if (val & PCI_ADDRESS_SPACE_IO) ++ paddr = &pci_bios_io_addr; ++ else ++ paddr = &pci_bios_mem_addr; ++ *paddr = (*paddr + size - 1) & ~(size - 1); ++ pci_set_io_region_addr(d, i, *paddr); ++ *paddr += size; ++ } ++ } ++ break; ++ } ++ ++ /* map the interrupt */ ++ pin = pci_config_readb(d, PCI_INTERRUPT_PIN); ++ if (pin != 0) { ++ pin = pci_slot_get_pirq(d, pin - 1); ++ pic_irq = pci_irqs[pin]; ++ pci_config_writeb(d, PCI_INTERRUPT_LINE, pic_irq); ++ } ++ ++ if (vendor_id == 0x8086 && device_id == 0x7113) { ++ /* PIIX4 Power Management device (for ACPI) */ ++ pm_io_base = PM_IO_BASE; ++ pci_config_writel(d, 0x40, pm_io_base | 1); ++ pci_config_writeb(d, 0x80, 0x01); /* enable PM io space */ ++ pm_sci_int = pci_config_readb(d, PCI_INTERRUPT_LINE); ++#ifdef BX_USE_SMM ++ smm_init(); ++#endif ++ acpi_enabled = 1; ++ } ++} ++ ++void pci_for_each_device(void (*init_func)(PCIDevice *d)) ++{ ++ PCIDevice d1, *d = &d1; ++ int bus, devfn; ++ uint16_t vendor_id, device_id; ++ ++ for(bus = 0; bus < 1; bus++) { ++ for(devfn = 0; devfn < 256; devfn++) { ++ d->bus = bus; ++ d->devfn = devfn; ++ vendor_id = pci_config_readw(d, PCI_VENDOR_ID); ++ device_id = pci_config_readw(d, PCI_DEVICE_ID); ++ if (vendor_id != 0xffff || device_id != 0xffff) { ++ init_func(d); ++ } ++ } ++ } ++} ++ ++void pci_bios_init(void) ++{ ++ pci_bios_io_addr = 0xc000; ++ pci_bios_mem_addr = 0xf0000000; ++ ++ pci_for_each_device(pci_bios_init_bridges); ++ ++ pci_for_each_device(pci_bios_init_device); ++} ++ ++/****************************************************/ ++/* Multi Processor table init */ ++ ++static void putb(uint8_t **pp, int val) ++{ ++ uint8_t *q; ++ q = *pp; ++ *q++ = val; ++ *pp = q; ++} ++ ++static void putstr(uint8_t **pp, const char *str) ++{ ++ uint8_t *q; ++ q = *pp; ++ while (*str) ++ *q++ = *str++; ++ *pp = q; ++} ++ ++static void putle16(uint8_t **pp, int val) ++{ ++ uint8_t *q; ++ q = *pp; ++ *q++ = val; ++ *q++ = val >> 8; ++ *pp = q; ++} ++ ++static void putle32(uint8_t **pp, int val) ++{ ++ uint8_t *q; ++ q = *pp; ++ *q++ = val; ++ *q++ = val >> 8; ++ *q++ = val >> 16; ++ *q++ = val >> 24; ++ *pp = q; ++} ++ ++static int mpf_checksum(const uint8_t *data, int len) ++{ ++ int sum, i; ++ sum = 0; ++ for(i = 0; i < len; i++) ++ sum += data[i]; ++ return sum & 0xff; ++} ++ ++static unsigned long align(unsigned long addr, unsigned long v) ++{ ++ return (addr + v - 1) & ~(v - 1); ++} ++ ++static void mptable_init(void) ++{ ++ uint8_t *mp_config_table, *q, *float_pointer_struct; ++ int ioapic_id, i, len; ++ int mp_config_table_size; ++ ++ if (smp_cpus <= 1) ++ return; ++ ++#ifdef BX_USE_EBDA_TABLES ++ mp_config_table = (uint8_t *)(ram_size - ACPI_DATA_SIZE - MPTABLE_MAX_SIZE); ++#else ++ bios_table_cur_addr = align(bios_table_cur_addr, 16); ++ mp_config_table = (uint8_t *)bios_table_cur_addr; ++#endif ++ q = mp_config_table; ++ putstr(&q, "PCMP"); /* "PCMP signature */ ++ putle16(&q, 0); /* table length (patched later) */ ++ putb(&q, 4); /* spec rev */ ++ putb(&q, 0); /* checksum (patched later) */ ++ putstr(&q, "QEMUCPU "); /* OEM id */ ++ putstr(&q, "0.1 "); /* vendor id */ ++ putle32(&q, 0); /* OEM table ptr */ ++ putle16(&q, 0); /* OEM table size */ ++ putle16(&q, 20); /* entry count */ ++ putle32(&q, 0xfee00000); /* local APIC addr */ ++ putle16(&q, 0); /* ext table length */ ++ putb(&q, 0); /* ext table checksum */ ++ putb(&q, 0); /* reserved */ ++ ++ for(i = 0; i < smp_cpus; i++) { ++ putb(&q, 0); /* entry type = processor */ ++ putb(&q, i); /* APIC id */ ++ putb(&q, 0x11); /* local APIC version number */ ++ if (i == 0) ++ putb(&q, 3); /* cpu flags: enabled, bootstrap cpu */ ++ else ++ putb(&q, 1); /* cpu flags: enabled */ ++ putb(&q, 0); /* cpu signature */ ++ putb(&q, 6); ++ putb(&q, 0); ++ putb(&q, 0); ++ putle16(&q, 0x201); /* feature flags */ ++ putle16(&q, 0); ++ ++ putle16(&q, 0); /* reserved */ ++ putle16(&q, 0); ++ putle16(&q, 0); ++ putle16(&q, 0); ++ } ++ ++ /* isa bus */ ++ putb(&q, 1); /* entry type = bus */ ++ putb(&q, 0); /* bus ID */ ++ putstr(&q, "ISA "); ++ ++ /* ioapic */ ++ ioapic_id = smp_cpus; ++ putb(&q, 2); /* entry type = I/O APIC */ ++ putb(&q, ioapic_id); /* apic ID */ ++ putb(&q, 0x11); /* I/O APIC version number */ ++ putb(&q, 1); /* enable */ ++ putle32(&q, 0xfec00000); /* I/O APIC addr */ ++ ++ /* irqs */ ++ for(i = 0; i < 16; i++) { ++ putb(&q, 3); /* entry type = I/O interrupt */ ++ putb(&q, 0); /* interrupt type = vectored interrupt */ ++ putb(&q, 0); /* flags: po=0, el=0 */ ++ putb(&q, 0); ++ putb(&q, 0); /* source bus ID = ISA */ ++ putb(&q, i); /* source bus IRQ */ ++ putb(&q, ioapic_id); /* dest I/O APIC ID */ ++ putb(&q, i); /* dest I/O APIC interrupt in */ ++ } ++ /* patch length */ ++ len = q - mp_config_table; ++ mp_config_table[4] = len; ++ mp_config_table[5] = len >> 8; ++ ++ mp_config_table[7] = -mpf_checksum(mp_config_table, q - mp_config_table); ++ ++ mp_config_table_size = q - mp_config_table; ++ ++#ifndef BX_USE_EBDA_TABLES ++ bios_table_cur_addr += mp_config_table_size; ++#endif ++ ++ /* floating pointer structure */ ++#ifdef BX_USE_EBDA_TABLES ++ ebda_cur_addr = align(ebda_cur_addr, 16); ++ float_pointer_struct = (uint8_t *)ebda_cur_addr; ++#else ++ bios_table_cur_addr = align(bios_table_cur_addr, 16); ++ float_pointer_struct = (uint8_t *)bios_table_cur_addr; ++#endif ++ q = float_pointer_struct; ++ putstr(&q, "_MP_"); ++ /* pointer to MP config table */ ++ putle32(&q, (unsigned long)mp_config_table); ++ ++ putb(&q, 1); /* length in 16 byte units */ ++ putb(&q, 4); /* MP spec revision */ ++ putb(&q, 0); /* checksum (patched later) */ ++ putb(&q, 0); /* MP feature byte 1 */ ++ ++ putb(&q, 0); ++ putb(&q, 0); ++ putb(&q, 0); ++ putb(&q, 0); ++ float_pointer_struct[10] = ++ -mpf_checksum(float_pointer_struct, q - float_pointer_struct); ++#ifdef BX_USE_EBDA_TABLES ++ ebda_cur_addr += (q - float_pointer_struct); ++#else ++ bios_table_cur_addr += (q - float_pointer_struct); ++#endif ++ BX_INFO("MP table addr=0x%08lx MPC table addr=0x%08lx size=0x%x\n", ++ (unsigned long)float_pointer_struct, ++ (unsigned long)mp_config_table, ++ mp_config_table_size); ++} ++ ++/****************************************************/ ++/* ACPI tables init */ ++ ++/* Table structure from Linux kernel (the ACPI tables are under the ++ BSD license) */ ++ ++#define ACPI_TABLE_HEADER_DEF /* ACPI common table header */ \ ++ uint8_t signature [4]; /* ACPI signature (4 ASCII characters) */\ ++ uint32_t length; /* Length of table, in bytes, including header */\ ++ uint8_t revision; /* ACPI Specification minor version # */\ ++ uint8_t checksum; /* To make sum of entire table == 0 */\ ++ uint8_t oem_id [6]; /* OEM identification */\ ++ uint8_t oem_table_id [8]; /* OEM table identification */\ ++ uint32_t oem_revision; /* OEM revision number */\ ++ uint8_t asl_compiler_id [4]; /* ASL compiler vendor ID */\ ++ uint32_t asl_compiler_revision; /* ASL compiler revision number */ ++ ++ ++struct acpi_table_header /* ACPI common table header */ ++{ ++ ACPI_TABLE_HEADER_DEF ++}; ++ ++struct rsdp_descriptor /* Root System Descriptor Pointer */ ++{ ++ uint8_t signature [8]; /* ACPI signature, contains "RSD PTR " */ ++ uint8_t checksum; /* To make sum of struct == 0 */ ++ uint8_t oem_id [6]; /* OEM identification */ ++ uint8_t revision; /* Must be 0 for 1.0, 2 for 2.0 */ ++ uint32_t rsdt_physical_address; /* 32-bit physical address of RSDT */ ++ uint32_t length; /* XSDT Length in bytes including hdr */ ++ uint64_t xsdt_physical_address; /* 64-bit physical address of XSDT */ ++ uint8_t extended_checksum; /* Checksum of entire table */ ++ uint8_t reserved [3]; /* Reserved field must be 0 */ ++}; ++ ++/* ++ * ACPI 1.0 Root System Description Table (RSDT) ++ */ ++struct rsdt_descriptor_rev1 ++{ ++ ACPI_TABLE_HEADER_DEF /* ACPI common table header */ ++ uint32_t table_offset_entry [2]; /* Array of pointers to other */ ++ /* ACPI tables */ ++}; ++ ++/* ++ * ACPI 1.0 Firmware ACPI Control Structure (FACS) ++ */ ++struct facs_descriptor_rev1 ++{ ++ uint8_t signature[4]; /* ACPI Signature */ ++ uint32_t length; /* Length of structure, in bytes */ ++ uint32_t hardware_signature; /* Hardware configuration signature */ ++ uint32_t firmware_waking_vector; /* ACPI OS waking vector */ ++ uint32_t global_lock; /* Global Lock */ ++ uint32_t S4bios_f : 1; /* Indicates if S4BIOS support is present */ ++ uint32_t reserved1 : 31; /* Must be 0 */ ++ uint8_t resverved3 [40]; /* Reserved - must be zero */ ++}; ++ ++ ++/* ++ * ACPI 1.0 Fixed ACPI Description Table (FADT) ++ */ ++struct fadt_descriptor_rev1 ++{ ++ ACPI_TABLE_HEADER_DEF /* ACPI common table header */ ++ uint32_t firmware_ctrl; /* Physical address of FACS */ ++ uint32_t dsdt; /* Physical address of DSDT */ ++ uint8_t model; /* System Interrupt Model */ ++ uint8_t reserved1; /* Reserved */ ++ uint16_t sci_int; /* System vector of SCI interrupt */ ++ uint32_t smi_cmd; /* Port address of SMI command port */ ++ uint8_t acpi_enable; /* Value to write to smi_cmd to enable ACPI */ ++ uint8_t acpi_disable; /* Value to write to smi_cmd to disable ACPI */ ++ uint8_t S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */ ++ uint8_t reserved2; /* Reserved - must be zero */ ++ uint32_t pm1a_evt_blk; /* Port address of Power Mgt 1a acpi_event Reg Blk */ ++ uint32_t pm1b_evt_blk; /* Port address of Power Mgt 1b acpi_event Reg Blk */ ++ uint32_t pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */ ++ uint32_t pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */ ++ uint32_t pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */ ++ uint32_t pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */ ++ uint32_t gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */ ++ uint32_t gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */ ++ uint8_t pm1_evt_len; /* Byte length of ports at pm1_x_evt_blk */ ++ uint8_t pm1_cnt_len; /* Byte length of ports at pm1_x_cnt_blk */ ++ uint8_t pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */ ++ uint8_t pm_tmr_len; /* Byte Length of ports at pm_tm_blk */ ++ uint8_t gpe0_blk_len; /* Byte Length of ports at gpe0_blk */ ++ uint8_t gpe1_blk_len; /* Byte Length of ports at gpe1_blk */ ++ uint8_t gpe1_base; /* Offset in gpe model where gpe1 events start */ ++ uint8_t reserved3; /* Reserved */ ++ uint16_t plvl2_lat; /* Worst case HW latency to enter/exit C2 state */ ++ uint16_t plvl3_lat; /* Worst case HW latency to enter/exit C3 state */ ++ uint16_t flush_size; /* Size of area read to flush caches */ ++ uint16_t flush_stride; /* Stride used in flushing caches */ ++ uint8_t duty_offset; /* Bit location of duty cycle field in p_cnt reg */ ++ uint8_t duty_width; /* Bit width of duty cycle field in p_cnt reg */ ++ uint8_t day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */ ++ uint8_t mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */ ++ uint8_t century; /* Index to century in RTC CMOS RAM */ ++ uint8_t reserved4; /* Reserved */ ++ uint8_t reserved4a; /* Reserved */ ++ uint8_t reserved4b; /* Reserved */ +#if 0 - printf( - #ifdef BX_APM - "apmbios " -@@ -1827,6 +1828,9 @@ - "eltorito " - #endif - "\n\n"); ++ uint32_t wb_invd : 1; /* The wbinvd instruction works properly */ ++ uint32_t wb_invd_flush : 1; /* The wbinvd flushes but does not invalidate */ ++ uint32_t proc_c1 : 1; /* All processors support C1 state */ ++ uint32_t plvl2_up : 1; /* C2 state works on MP system */ ++ uint32_t pwr_button : 1; /* Power button is handled as a generic feature */ ++ uint32_t sleep_button : 1; /* Sleep button is handled as a generic feature, or not present */ ++ uint32_t fixed_rTC : 1; /* RTC wakeup stat not in fixed register space */ ++ uint32_t rtcs4 : 1; /* RTC wakeup stat not possible from S4 */ ++ uint32_t tmr_val_ext : 1; /* The tmr_val width is 32 bits (0 = 24 bits) */ ++ uint32_t reserved5 : 23; /* Reserved - must be zero */ +#else -+ printf("apmbios pcibios eltorito \n\n"); ++ uint32_t flags; +#endif - } - - //-------------------------------------------------------------------------- -@@ -3999,6 +4003,29 @@ - } - #endif - ++}; ++ ++/* ++ * MADT values and structures ++ */ ++ ++/* Values for MADT PCATCompat */ ++ ++#define DUAL_PIC 0 ++#define MULTIPLE_APIC 1 ++ ++ ++/* Master MADT */ ++ ++struct multiple_apic_table ++{ ++ ACPI_TABLE_HEADER_DEF /* ACPI common table header */ ++ uint32_t local_apic_address; /* Physical address of local APIC */ ++#if 0 ++ uint32_t PCATcompat : 1; /* A one indicates system also has dual 8259s */ ++ uint32_t reserved1 : 31; ++#else ++ uint32_t flags; ++#endif ++}; ++ ++ ++/* Values for Type in APIC_HEADER_DEF */ ++ ++#define APIC_PROCESSOR 0 ++#define APIC_IO 1 ++#define APIC_XRUPT_OVERRIDE 2 ++#define APIC_NMI 3 ++#define APIC_LOCAL_NMI 4 ++#define APIC_ADDRESS_OVERRIDE 5 ++#define APIC_IO_SAPIC 6 ++#define APIC_LOCAL_SAPIC 7 ++#define APIC_XRUPT_SOURCE 8 ++#define APIC_RESERVED 9 /* 9 and greater are reserved */ ++ ++/* ++ * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE) ++ */ ++#define APIC_HEADER_DEF /* Common APIC sub-structure header */\ ++ uint8_t type; \ ++ uint8_t length; ++ ++/* Sub-structures for MADT */ ++ ++struct madt_processor_apic ++{ ++ APIC_HEADER_DEF ++ uint8_t processor_id; /* ACPI processor id */ ++ uint8_t local_apic_id; /* Processor's local APIC id */ ++#if 0 ++ uint32_t processor_enabled: 1; /* Processor is usable if set */ ++ uint32_t reserved2 : 31; /* Reserved, must be zero */ ++#else ++ uint32_t flags; ++#endif ++}; ++ ++struct madt_io_apic ++{ ++ APIC_HEADER_DEF ++ uint8_t io_apic_id; /* I/O APIC ID */ ++ uint8_t reserved; /* Reserved - must be zero */ ++ uint32_t address; /* APIC physical address */ ++ uint32_t interrupt; /* Global system interrupt where INTI ++ * lines start */ ++}; ++ ++#include "acpi-dsdt.hex" + -+void set_e820_range(ES, DI, start, end, type) -+ Bit16u ES; -+ Bit16u DI; -+ Bit32u start; -+ Bit32u end; -+ Bit16u type; -+{ -+ write_word(ES, DI, start); -+ write_word(ES, DI+2, start >> 16); -+ write_word(ES, DI+4, 0x00); -+ write_word(ES, DI+6, 0x00); ++static inline uint16_t cpu_to_le16(uint16_t x) ++{ ++ return x; ++} ++ ++static inline uint32_t cpu_to_le32(uint32_t x) ++{ ++ return x; ++} ++ ++static int acpi_checksum(const uint8_t *data, int len) ++{ ++ int sum, i; ++ sum = 0; ++ for(i = 0; i < len; i++) ++ sum += data[i]; ++ return (-sum) & 0xff; ++} ++ ++static void acpi_build_table_header(struct acpi_table_header *h, ++ char *sig, int len) ++{ ++ memcpy(h->signature, sig, 4); ++ h->length = cpu_to_le32(len); ++ h->revision = 0; ++ memcpy(h->oem_id, "QEMU ", 6); ++ memcpy(h->oem_table_id, "QEMU", 4); ++ memcpy(h->oem_table_id + 4, sig, 4); ++ h->oem_revision = cpu_to_le32(1); ++ memcpy(h->asl_compiler_id, "QEMU", 4); ++ h->asl_compiler_revision = cpu_to_le32(1); ++ h->checksum = acpi_checksum((void *)h, len); ++} ++ ++/* base_addr must be a multiple of 4KB */ ++void acpi_bios_init(void) ++{ ++ struct rsdp_descriptor *rsdp; ++ struct rsdt_descriptor_rev1 *rsdt; ++ struct fadt_descriptor_rev1 *fadt; ++ struct facs_descriptor_rev1 *facs; ++ struct multiple_apic_table *madt; ++ uint8_t *dsdt; ++ uint32_t base_addr, rsdt_addr, fadt_addr, addr, facs_addr, dsdt_addr; ++ uint32_t acpi_tables_size, madt_addr, madt_size; ++ int i; ++ ++ /* reserve memory space for tables */ ++#ifdef BX_USE_EBDA_TABLES ++ ebda_cur_addr = align(ebda_cur_addr, 16); ++ rsdp = (void *)(ebda_cur_addr); ++ ebda_cur_addr += sizeof(*rsdp); ++#else ++ bios_table_cur_addr = align(bios_table_cur_addr, 16); ++ rsdp = (void *)(bios_table_cur_addr); ++ bios_table_cur_addr += sizeof(*rsdp); ++#endif ++ ++ addr = base_addr = ram_size - ACPI_DATA_SIZE; ++ rsdt_addr = addr; ++ rsdt = (void *)(addr); ++ addr += sizeof(*rsdt); ++ ++ fadt_addr = addr; ++ fadt = (void *)(addr); ++ addr += sizeof(*fadt); ++ ++ /* XXX: FACS should be in RAM */ ++ addr = (addr + 63) & ~63; /* 64 byte alignment for FACS */ ++ facs_addr = addr; ++ facs = (void *)(addr); ++ addr += sizeof(*facs); ++ ++ dsdt_addr = addr; ++ dsdt = (void *)(addr); ++ addr += sizeof(AmlCode); ++ ++ addr = (addr + 7) & ~7; ++ madt_addr = addr; ++ madt_size = sizeof(*madt) + ++ sizeof(struct madt_processor_apic) * smp_cpus + ++ sizeof(struct madt_io_apic); ++ madt = (void *)(addr); ++ addr += madt_size; ++ ++ acpi_tables_size = addr - base_addr; ++ ++ BX_INFO("ACPI tables: RSDP addr=0x%08lx ACPI DATA addr=0x%08lx size=0x%x\n", ++ (unsigned long)rsdp, ++ (unsigned long)rsdt, acpi_tables_size); ++ ++ /* RSDP */ ++ memset(rsdp, 0, sizeof(*rsdp)); ++ memcpy(rsdp->signature, "RSD PTR ", 8); ++ memcpy(rsdp->oem_id, "QEMU ", 6); ++ rsdp->rsdt_physical_address = cpu_to_le32(rsdt_addr); ++ rsdp->checksum = acpi_checksum((void *)rsdp, 20); + -+ end -= start; -+ write_word(ES, DI+8, end); -+ write_word(ES, DI+10, end >> 16); -+ write_word(ES, DI+12, 0x0000); -+ write_word(ES, DI+14, 0x0000); ++ /* RSDT */ ++ rsdt->table_offset_entry[0] = cpu_to_le32(fadt_addr); ++ rsdt->table_offset_entry[1] = cpu_to_le32(madt_addr); ++ acpi_build_table_header((struct acpi_table_header *)rsdt, ++ "RSDT", sizeof(*rsdt)); + -+ write_word(ES, DI+16, type); -+ write_word(ES, DI+18, 0x0); ++ /* FADT */ ++ memset(fadt, 0, sizeof(*fadt)); ++ fadt->firmware_ctrl = cpu_to_le32(facs_addr); ++ fadt->dsdt = cpu_to_le32(dsdt_addr); ++ fadt->model = 1; ++ fadt->reserved1 = 0; ++ fadt->sci_int = cpu_to_le16(pm_sci_int); ++ fadt->smi_cmd = cpu_to_le32(SMI_CMD_IO_ADDR); ++ fadt->acpi_enable = 0xf1; ++ fadt->acpi_disable = 0xf0; ++ fadt->pm1a_evt_blk = cpu_to_le32(pm_io_base); ++ fadt->pm1a_cnt_blk = cpu_to_le32(pm_io_base + 0x04); ++ fadt->pm_tmr_blk = cpu_to_le32(pm_io_base + 0x08); ++ fadt->pm1_evt_len = 4; ++ fadt->pm1_cnt_len = 2; ++ fadt->pm_tmr_len = 4; ++ fadt->plvl2_lat = cpu_to_le16(50); ++ fadt->plvl3_lat = cpu_to_le16(50); ++ fadt->plvl3_lat = cpu_to_le16(50); ++ /* WBINVD + PROC_C1 + PWR_BUTTON + SLP_BUTTON + FIX_RTC */ ++ fadt->flags = cpu_to_le32((1 << 0) | (1 << 2) | (1 << 4) | (1 << 5) | (1 << 6)); ++ acpi_build_table_header((struct acpi_table_header *)fadt, "FACP", ++ sizeof(*fadt)); ++ ++ /* FACS */ ++ memset(facs, 0, sizeof(*facs)); ++ memcpy(facs->signature, "FACS", 4); ++ facs->length = cpu_to_le32(sizeof(*facs)); ++ ++ /* DSDT */ ++ memcpy(dsdt, AmlCode, sizeof(AmlCode)); ++ ++ /* MADT */ ++ { ++ struct madt_processor_apic *apic; ++ struct madt_io_apic *io_apic; ++ ++ memset(madt, 0, madt_size); ++ madt->local_apic_address = cpu_to_le32(0xfee00000); ++ madt->flags = cpu_to_le32(1); ++ apic = (void *)(madt + 1); ++ for(i=0;i<smp_cpus;i++) { ++ apic->type = APIC_PROCESSOR; ++ apic->length = sizeof(*apic); ++ apic->processor_id = i; ++ apic->local_apic_id = i; ++ apic->flags = cpu_to_le32(1); ++ apic++; ++ } ++ io_apic = (void *)apic; ++ io_apic->type = APIC_IO; ++ io_apic->length = sizeof(*io_apic); ++ io_apic->io_apic_id = smp_cpus; ++ io_apic->address = cpu_to_le32(0xfec00000); ++ io_apic->interrupt = cpu_to_le32(0); ++ ++ acpi_build_table_header((struct acpi_table_header *)madt, ++ "APIC", madt_size); ++ } ++} ++ ++void rombios32_init(void) ++{ ++ BX_INFO("Starting rombios32\n"); ++ ++ ram_probe(); ++ ++ cpu_probe(); ++ ++ smp_probe(); ++ ++ pci_bios_init(); ++ ++ if (bios_table_cur_addr != 0) { ++ ++ mptable_init(); ++ ++ if (acpi_enabled) ++ acpi_bios_init(); ++ ++ bios_lock_shadow_ram(); ++ } ++} +diff -ruN --exclude Makefile bios/rombios32.ld bios.new/rombios32.ld +--- bios/rombios32.ld 1970-01-01 01:00:00.000000000 +0100 ++++ bios.new/rombios32.ld 2006-09-24 20:28:05.000000000 +0200 +@@ -0,0 +1,19 @@ ++OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") ++OUTPUT_ARCH(i386) ++ENTRY(_start); ++SECTIONS ++{ ++ . = 0x00040000; ++ .text : { *(.text) } ++ .rodata : { *(.rodata) } ++ . = ALIGN(4096); ++ .data : { *(.data) } ++ __bss_start = . ; ++ .bss : { *(.bss) *(COMMON) } ++ _end = . ; ++ /DISCARD/ : { *(.stab) ++ *(.stabstr) ++ *(.comment) ++ *(.note) ++ } +} +diff -ruN --exclude Makefile bios/rombios32start.S bios.new/rombios32start.S +--- bios/rombios32start.S 1970-01-01 01:00:00.000000000 +0100 ++++ bios.new/rombios32start.S 2006-09-24 20:22:58.000000000 +0200 +@@ -0,0 +1,76 @@ ++.globl _start ++.globl smp_ap_boot_code_start ++.globl smp_ap_boot_code_end ++.global smm_relocation_start ++.global smm_relocation_end ++.global smm_code_start ++.global smm_code_end ++ ++#define PM_IO_BASE 0xb000 ++ ++_start: ++ /* clear bss section */ ++ xor %eax, %eax ++ mov $__bss_start, %edi ++ mov $_end, %ecx ++ sub %edi, %ecx ++ rep stosb ++ ++ jmp rombios32_init ++ ++#define CPU_COUNT 0xf000 ++ ++ .code16 ++smp_ap_boot_code_start: ++ xor %ax, %ax ++ mov %ax, %ds ++ incw CPU_COUNT ++1: ++ hlt ++ jmp 1b ++smp_ap_boot_code_end: ++ ++/* code to relocate SMBASE to 0xa0000 */ ++smm_relocation_start: ++ mov $0x38000 + 0x7efc, %ebx ++ mov (%ebx), %al /* revision ID to see if x86_64 or x86 */ ++ cmp $0x64, %al ++ je 1f ++ mov $0x38000 + 0x7ef8, %ebx ++ jmp 2f ++1: ++ mov $0x38000 + 0x7f00, %ebx ++2: ++ movl $0xa0000, %eax ++ movl %eax, (%ebx) ++ rsm ++smm_relocation_end: ++ ++/* minimal SMM code to enable or disable ACPI */ ++smm_code_start: ++ movw $0xb2, %dx ++ inb %dx, %al ++ cmp $0xf0, %al ++ jne 1f ++ ++ /* ACPI disable */ ++ mov $PM_IO_BASE + 0x04, %dx /* PMCNTRL */ ++ inw %dx, %ax ++ andw $~1, %ax ++ outw %ax, %dx ++ ++ jmp 2f ++ ++1: ++ cmp $0xf1, %al ++ jne 2f ++ ++ /* ACPI enable */ ++ mov $PM_IO_BASE + 0x04, %dx /* PMCNTRL */ ++ inw %dx, %ax ++ orw $1, %ax ++ outw %ax, %dx ++ ++2: ++ rsm ++smm_code_end: +diff -ruN --exclude Makefile bios/rombios.c bios.new/rombios.c +--- bios/rombios.c 2006-08-11 19:34:12.000000000 +0200 ++++ bios.new/rombios.c 2006-09-24 20:35:47.000000000 +0200 +@@ -24,7 +24,7 @@ + // License along with this library; if not, write to the Free Software + // Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + +-// ROM BIOS for use with Bochs/Plex x86 emulation environment ++// ROM BIOS for use with Bochs/Plex x86/QEMU emulation environment + + + // ROM BIOS compatability entry points: +@@ -143,6 +143,7 @@ + #define BX_FLOPPY_ON_CNT 37 /* 2 seconds */ + #define BX_PCIBIOS 1 + #define BX_APM 1 ++#define BX_ROMBIOS32 1 + + #define BX_USE_ATADRV 1 + #define BX_ELTORITO_BOOT 1 +@@ -159,6 +160,9 @@ + #define BIOS_REVISION 1 + #define BIOS_CONFIG_TABLE 0xe6f5 + ++/* define it to include QEMU specific code */ ++#define BX_QEMU ++ + #ifndef BIOS_BUILD_DATE + # define BIOS_BUILD_DATE "06/23/99" + #endif +@@ -170,7 +174,9 @@ + #define BASE_MEM_IN_K (640 - EBDA_SIZE) + + // Define the application NAME +-#ifdef PLEX86 ++#if defined(BX_QEMU) ++# define BX_APPNAME "QEMU" ++#elif defined(PLEX86) + # define BX_APPNAME "Plex86" + #else + # define BX_APPNAME "Bochs" +@@ -1826,6 +1832,9 @@ + #ifdef BX_ELTORITO_BOOT + "eltorito " + #endif ++#ifdef BX_ROMBIOS32 ++ "rombios32 " ++#endif + "\n\n"); + } + +@@ -4085,6 +4094,24 @@ + case 0x20: // coded by osmaker aka K.J. + if(regs.u.r32.edx == 0x534D4150) + { ++ extended_memory_size = inb_cmos(0x35); ++ extended_memory_size <<= 8; ++ extended_memory_size |= inb_cmos(0x34); ++ extended_memory_size *= 64; ++ // greater than EFF00000??? ++ if(extended_memory_size > 0x3bc000) { ++ extended_memory_size = 0x3bc000; // everything after this is reserved memory until we get to 0x100000000 ++ } ++ extended_memory_size *= 1024; ++ extended_memory_size += (16L * 1024 * 1024); ++ ++ if(extended_memory_size <= (16L * 1024 * 1024)) { ++ extended_memory_size = inb_cmos(0x31); ++ extended_memory_size <<= 8; ++ extended_memory_size |= inb_cmos(0x30); ++ extended_memory_size *= 1024; ++ } + - void - int15_function32(regs, ES, DS, FLAGS) - pushad_regs_t regs; // REGS pushed via pushad -@@ -4063,19 +4090,8 @@ switch(regs.u.r16.bx) { case 0: -- write_word(ES, regs.u.r16.di, 0x00); -- write_word(ES, regs.u.r16.di+2, 0x00); -- write_word(ES, regs.u.r16.di+4, 0x00); -- write_word(ES, regs.u.r16.di+6, 0x00); -- -- write_word(ES, regs.u.r16.di+8, 0xFC00); -- write_word(ES, regs.u.r16.di+10, 0x0009); -- write_word(ES, regs.u.r16.di+12, 0x0000); -- write_word(ES, regs.u.r16.di+14, 0x0000); -- -- write_word(ES, regs.u.r16.di+16, 0x1); -- write_word(ES, regs.u.r16.di+18, 0x0); -- -+ set_e820_range(ES, regs.u.r16.di, -+ 0x0000000L, 0x0009fc00L, 1); - regs.u.r32.ebx = 1; - regs.u.r32.eax = 0x534D4150; - regs.u.r32.ecx = 0x14; -@@ -4083,6 +4099,24 @@ +@@ -4115,27 +4142,9 @@ return; break; - case 1: -+ set_e820_range(ES, regs.u.r16.di, -+ 0x0009fc00L, 0x000a0000L, 2); -+ regs.u.r32.ebx = 2; -+ regs.u.r32.eax = 0x534D4150; -+ regs.u.r32.ecx = 0x14; -+ CLEAR_CF(); -+ return; -+ break; -+ case 2: -+ set_e820_range(ES, regs.u.r16.di, -+ 0x000e8000L, 0x00100000L, 2); -+ regs.u.r32.ebx = 3; -+ regs.u.r32.eax = 0x534D4150; -+ regs.u.r32.ecx = 0x14; -+ CLEAR_CF(); -+ return; -+ break; -+ case 3: - extended_memory_size = inb_cmos(0x35); - extended_memory_size <<= 8; - extended_memory_size |= inb_cmos(0x34); -@@ -4092,9 +4126,9 @@ - extended_memory_size = 0x3bc000; // everything after this is reserved memory until we get to 0x100000000 - } - extended_memory_size *= 1024; -- extended_memory_size += 15728640; // make up for the 16mb of memory that is chopped off -+ extended_memory_size += (16L * 1024 * 1024); - -- if(extended_memory_size <= 15728640) -+ if(extended_memory_size <= (16L * 1024 * 1024)) - { - extended_memory_size = inb_cmos(0x31); - extended_memory_size <<= 8; -@@ -4102,28 +4136,23 @@ - extended_memory_size *= 1024; - } - -- write_word(ES, regs.u.r16.di, 0x0000); -- write_word(ES, regs.u.r16.di+2, 0x0010); -- write_word(ES, regs.u.r16.di+4, 0x0000); -- write_word(ES, regs.u.r16.di+6, 0x0000); -- -- write_word(ES, regs.u.r16.di+8, extended_memory_size); -- extended_memory_size >>= 16; -- write_word(ES, regs.u.r16.di+10, extended_memory_size); -- extended_memory_size >>= 16; -- write_word(ES, regs.u.r16.di+12, extended_memory_size); -- extended_memory_size >>= 16; -- write_word(ES, regs.u.r16.di+14, extended_memory_size); + case 3: +- extended_memory_size = inb_cmos(0x35); +- extended_memory_size <<= 8; +- extended_memory_size |= inb_cmos(0x34); +- extended_memory_size *= 64; +- if(extended_memory_size > 0x3bc000) // greater than EFF00000??? +- { +- extended_memory_size = 0x3bc000; // everything after this is reserved memory until we get to 0x100000000 +- } +- extended_memory_size *= 1024; +- extended_memory_size += (16L * 1024 * 1024); - -- write_word(ES, regs.u.r16.di+16, 0x1); -- write_word(ES, regs.u.r16.di+18, 0x0); +- if(extended_memory_size <= (16L * 1024 * 1024)) +- { +- extended_memory_size = inb_cmos(0x31); +- extended_memory_size <<= 8; +- extended_memory_size |= inb_cmos(0x30); +- extended_memory_size *= 1024; +- } - -- regs.u.r32.ebx = 0; -+ set_e820_range(ES, regs.u.r16.di, -+ 0x00100000L, extended_memory_size, 1); -+ regs.u.r32.ebx = 4; + set_e820_range(ES, regs.u.r16.di, +- 0x00100000L, extended_memory_size, 1); ++ 0x00100000L, ++ extended_memory_size - 0x10000L, 1); + regs.u.r32.ebx = 4; regs.u.r32.eax = 0x534D4150; regs.u.r32.ecx = 0x14; - CLEAR_CF(); +@@ -4143,6 +4152,16 @@ return; break; -+ case 4: -+ /* 256KB BIOS area at the end of 4 GB */ + case 4: + set_e820_range(ES, regs.u.r16.di, -+ 0xfffc0000L, 0x00000000L, 2); -+ regs.u.r32.ebx = 0; ++ extended_memory_size - 0x10000L, ++ extended_memory_size, 3); // ACPI RAM ++ regs.u.r32.ebx = 5; + regs.u.r32.eax = 0x534D4150; + regs.u.r32.ecx = 0x14; + CLEAR_CF(); + return; - default: /* AX=E820, DX=534D4150, BX unrecognized */ - goto int15_unimplemented; - break; -@@ -8713,6 +8742,7 @@ ++ break; ++ case 5: + /* 256KB BIOS area at the end of 4 GB */ + set_e820_range(ES, regs.u.r16.di, + 0xfffc0000L, 0x00000000L, 2); +@@ -8757,6 +8776,9 @@ + unknown_service: mov al, #0x80 bios32_end: ++#ifdef BX_QEMU ++ and dword ptr[esp+8],0xfffffffc ;; reset CS.RPL for kqemu ++#endif popf -+ and dword ptr[esp+4],0xfffffffc ;; reset CS.RPL for kqemu retf - .align 16 -@@ -8823,17 +8853,17 @@ +@@ -8868,6 +8890,9 @@ pci_pro_fail: pop edi pop esi -- sti ++#ifdef BX_QEMU ++ and dword ptr[esp+8],0xfffffffc ;; reset CS.RPL for kqemu ++#endif popf stc -+ and dword ptr[esp+4],0xfffffffc ;; reset CS.RPL for kqemu retf - pci_pro_ok: +@@ -8875,6 +8900,9 @@ xor ah, ah pop edi pop esi -- sti ++#ifdef BX_QEMU ++ and dword ptr[esp+8],0xfffffffc ;; reset CS.RPL for kqemu ++#endif popf clc -+ and dword ptr[esp+4],0xfffffffc ;; reset CS.RPL for kqemu retf +@@ -9183,227 +9211,118 @@ + db 0 ;; reserved + pci_routing_table_structure_end: + +-pci_irq_list: +- db 11, 10, 9, 5; ++#endif // BX_PCIBIOS + +-pcibios_init_sel_reg: +- push eax +- mov eax, #0x800000 +- mov ax, bx +- shl eax, #8 +- and dl, #0xfc +- or al, dl +- mov dx, #0x0cf8 +- out dx, eax +- pop eax +- ret +- +-pcibios_init_iomem_bases: +- push bp +- mov bp, sp +- mov eax, #0xe0000000 ;; base for memory init +- push eax +- mov ax, #0xc000 ;; base for i/o init +- push ax +- mov ax, #0x0010 ;; start at base address #0 ++#if BX_ROMBIOS32 ++rombios32_init: ++ ;; save a20 and enable it ++ in al, 0x92 + push ax +- mov bx, #0x0008 +-pci_init_io_loop1: +- mov dl, #0x00 +- call pcibios_init_sel_reg +- mov dx, #0x0cfc +- in ax, dx +- cmp ax, #0xffff +- jz next_pci_dev +- mov dl, #0x04 ;; disable i/o and memory space access +- call pcibios_init_sel_reg +- mov dx, #0x0cfc +- in al, dx +- and al, #0xfc +- out dx, al +-pci_init_io_loop2: +- mov dl, [bp-8] +- call pcibios_init_sel_reg +- mov dx, #0x0cfc +- in eax, dx +- test al, #0x01 +- jnz init_io_base +- mov ecx, eax +- mov eax, #0xffffffff +- out dx, eax +- in eax, dx +- cmp eax, ecx +- je next_pci_base +- xor eax, #0xffffffff +- mov ecx, eax +- mov eax, [bp-4] +- out dx, eax +- add eax, ecx ;; calculate next free mem base +- add eax, #0x01000000 +- and eax, #0xff000000 +- mov [bp-4], eax +- jmp next_pci_base +-init_io_base: +- mov cx, ax +- mov ax, #0xffff +- out dx, ax +- in ax, dx +- cmp ax, cx +- je next_pci_base +- xor ax, #0xfffe +- mov cx, ax +- mov ax, [bp-6] +- out dx, ax +- add ax, cx ;; calculate next free i/o base +- add ax, #0x0100 +- and ax, #0xff00 +- mov [bp-6], ax +-next_pci_base: +- mov al, [bp-8] +- add al, #0x04 +- cmp al, #0x28 +- je enable_iomem_space +- mov byte ptr[bp-8], al +- jmp pci_init_io_loop2 +-enable_iomem_space: +- mov dl, #0x04 ;; enable i/o and memory space access if available +- call pcibios_init_sel_reg +- mov dx, #0x0cfc +- in al, dx +- or al, #0x07 +- out dx, al +-next_pci_dev: +- mov byte ptr[bp-8], #0x10 +- inc bx +- cmp bx, #0x0100 +- jne pci_init_io_loop1 +- mov sp, bp +- pop bp +- ret ++ or al, #0x02 ++ out 0x92, al - pci_pro_select_reg: -@@ -8971,7 +9001,7 @@ - jmp pci_real_ok - pci_real_f0d: ;; write configuration dword - cmp al, #0x0d -- jne pci_real_unknown -+ jne pci_real_f0e - call pci_real_select_reg - push dx - mov dx, #0x0cfc -@@ -8979,6 +9009,46 @@ - out dx, eax - pop dx - jmp pci_real_ok -+pci_real_f0e: ;; get irq routing options -+ cmp al, #0x0e -+ jne pci_real_unknown -+ SEG ES -+ cmp word ptr [di], #pci_routing_table_structure_end - pci_routing_table_structure_start -+ jb pci_real_too_small -+ SEG ES -+ mov word ptr [di], #pci_routing_table_structure_end - pci_routing_table_structure_start -+ pushf -+ push ds -+ push es -+ push cx -+ push si -+ push di +-pcibios_init_set_elcr: +- push ax +- push cx +- mov dx, #0x04d0 +- test al, #0x08 +- jz is_master_pic +- inc dx +- and al, #0x07 +-is_master_pic: +- mov cl, al +- mov bl, #0x01 +- shl bl, cl +- in al, dx +- or al, bl +- out dx, al +- pop cx +- pop ax +- ret ++ ;; save SS:SP to the BDA ++ xor ax, ax ++ mov ds, ax ++ mov 0x0469, ss ++ mov 0x0467, sp + +-pcibios_init_irqs: +- push ds +- push bp +- mov ax, #0xf000 +- mov ds, ax +- mov dx, #0x04d0 ;; reset ELCR1 + ELCR2 +- mov al, #0x00 +- out dx, al +- inc dx +- out dx, al +- mov si, #pci_routing_table_structure +- mov bh, [si+8] +- mov bl, [si+9] +- mov dl, #0x00 +- call pcibios_init_sel_reg +- mov dx, #0x0cfc +- in eax, dx +- cmp eax, [si+12] ;; check irq router +- jne pci_init_end +- mov dl, [si+34] +- call pcibios_init_sel_reg +- push bx ;; save irq router bus + devfunc +- mov dx, #0x0cfc +- mov ax, #0x8080 +- out dx, ax ;; reset PIRQ route control +- inc dx +- inc dx +- out dx, ax +- mov ax, [si+6] +- sub ax, #0x20 +- shr ax, #4 +- mov cx, ax +- add si, #0x20 ;; set pointer to 1st entry +- mov bp, sp +- mov ax, #pci_irq_list +- push ax +- xor ax, ax +- push ax +-pci_init_irq_loop1: +- mov bh, [si] +- mov bl, [si+1] +-pci_init_irq_loop2: +- mov dl, #0x00 +- call pcibios_init_sel_reg +- mov dx, #0x0cfc +- in ax, dx +- cmp ax, #0xffff +- jnz pci_test_int_pin +- test bl, #0x07 +- jz next_pir_entry +- jmp next_pci_func +-pci_test_int_pin: +- mov dl, #0x3c +- call pcibios_init_sel_reg +- mov dx, #0x0cfd +- in al, dx +- and al, #0x07 +- jz next_pci_func +- dec al ;; determine pirq reg +- mov dl, #0x03 +- mul al, dl +- add al, #0x02 +- xor ah, ah +- mov bx, ax +- mov al, [si+bx] +- mov dl, al +- mov bx, [bp] +- call pcibios_init_sel_reg +- mov dx, #0x0cfc +- and al, #0x03 +- add dl, al +- in al, dx +- cmp al, #0x80 +- jb pirq_found +- mov bx, [bp-2] ;; pci irq list pointer +- mov al, [bx] +- out dx, al +- inc bx +- mov [bp-2], bx +- call pcibios_init_set_elcr +-pirq_found: +- mov bh, [si] +- mov bl, [si+1] +- add bl, [bp-3] ;; pci function number +- mov dl, #0x3c +- call pcibios_init_sel_reg +- mov dx, #0x0cfc +- out dx, al +-next_pci_func: +- inc byte ptr[bp-3] +- inc bl +- test bl, #0x07 +- jnz pci_init_irq_loop2 +-next_pir_entry: +- add si, #0x10 +- mov byte ptr[bp-3], #0x00 +- loop pci_init_irq_loop1 +- mov sp, bp +- pop bx +-pci_init_end: +- pop bp +- pop ds ++ SEG CS ++ lidt [pmode_IDT_info] ++ SEG CS ++ lgdt [rombios32_gdt_48] ++ ;; set PE bit in CR0 ++ mov eax, cr0 ++ or al, #0x01 ++ mov cr0, eax ++ ;; start protected mode code: ljmpl 0x10:rombios32_init1 ++ db 0x66, 0xea ++ dw rombios32_05 ++ dw 0x000f ;; high 16 bit address ++ dw 0x0010 ++ ++use32 386 ++rombios32_05: ++ ;; init data segments ++ mov eax, #0x18 ++ mov ds, ax ++ mov es, ax ++ mov ss, ax ++ xor eax, eax ++ mov fs, ax ++ mov gs, ax + cld -+ mov si, #pci_routing_table_structure_start -+ push cs -+ pop ds -+ SEG ES -+ mov cx, [di+2] -+ SEG ES -+ mov es, [di+4] -+ mov di, cx -+ mov cx, #pci_routing_table_structure_end - pci_routing_table_structure_start ++ ++ ;; copy rombios32 code to ram (ram offset = 1MB) ++ mov esi, #0xfffe0000 ++ mov edi, #0x00040000 ++ mov ecx, #0x10000 / 4 + rep -+ movsb -+ pop di -+ pop si -+ pop cx -+ pop es -+ pop ds -+ popf -+ mov bx, #(1 << 9) | (1 << 11) ;; irq 9 and 11 are used -+ jmp pci_real_ok -+pci_real_too_small: -+ SEG ES -+ mov word ptr [di], #pci_routing_table_structure_end - pci_routing_table_structure_start -+ mov ah, #0x89 -+ jmp pci_real_fail -+ - pci_real_unknown: - mov ah, #0x81 - pci_real_fail: -@@ -9019,6 +9089,7 @@ - dw 0,0 ;; Miniport data - db 0,0,0,0,0,0,0,0,0,0,0 ;; reserved - db 0x07 ;; checksum -+pci_routing_table_structure_start: - ;; first slot entry PCI-to-ISA (embedded) - db 0 ;; pci bus number - db 0x08 ;; pci device number (bit 7-3) -@@ -9097,6 +9168,7 @@ - dw 0xdef8 ;; IRQ bitmap INTD# - db 5 ;; physical slot (0 = embedded) - db 0 ;; reserved -+pci_routing_table_structure_end: ++ movsd ++ ++ ;; init the stack pointer ++ mov esp, #0x00080000 ++ ++ ;; call rombios32 code ++ mov eax, #0x00040000 ++ call eax ++ ++ ;; return to 16 bit protected mode first ++ db 0xea ++ dd rombios32_10 ++ dw 0x20 ++ ++use16 386 ++rombios32_10: ++ ;; restore data segment limits to 0xffff ++ mov ax, #0x28 ++ mov ds, ax ++ mov es, ax ++ mov ss, ax ++ mov fs, ax ++ mov gs, ax ++ ++ ;; reset PE bit in CR0 ++ mov eax, cr0 ++ and al, #0xFE ++ mov cr0, eax ++ ++ ;; far jump to flush CPU queue after transition to real mode ++ JMP_AP(0xf000, rombios32_real_mode) ++ ++rombios32_real_mode: ++ ;; restore IDT to normal real-mode defaults ++ SEG CS ++ lidt [rmode_IDT_info] ++ ++ xor ax, ax ++ mov ds, ax ++ mov es, ax ++ mov fs, ax ++ mov gs, ax ++ ++ ;; restore SS:SP from the BDA ++ mov ss, 0x0469 ++ mov sp, 0x0467 ++ ;; restore a20 ++ pop ax ++ out 0x92, al + ret +-#endif // BX_PCIBIOS ++ ++rombios32_gdt_48: ++ dw 0x30 ++ dw rombios32_gdt ++ dw 0x000f ++ ++rombios32_gdt: ++ dw 0, 0, 0, 0 ++ dw 0, 0, 0, 0 ++ dw 0xffff, 0, 0x9b00, 0x00cf ; 32 bit flat code segment (0x10) ++ dw 0xffff, 0, 0x9300, 0x00cf ; 32 bit flat data segment (0x18) ++ dw 0xffff, 0, 0x9b0f, 0x0000 ; 16 bit code segment base=0xf0000 limit=0xffff ++ dw 0xffff, 0, 0x9300, 0x0000 ; 16 bit data segment base=0x0 limit=0xffff ++#endif ++ + + ; parallel port detection: base address in DX, index in BX, timeout in CL + detect_parport: +@@ -9535,10 +9454,17 @@ + ;; DATA_SEG_DEFS_HERE + + ++;; the following area can be used to write dynamically generated tables ++ .align 16 ++bios_table_area_start: ++ dd 0xaafb4442 ++ dd bios_table_area_end - bios_table_area_start - 8; ++ + ;-------- + ;- POST - + ;-------- + .org 0xe05b ; POST Entry Point ++bios_table_area_end: + post: + + xor ax, ax +@@ -9802,9 +9728,9 @@ + #endif + out 0xa1, AL ;slave pic: unmask IRQ 12, 13, 14 + +- call pcibios_init_iomem_bases +- call pcibios_init_irqs +- ++#if BX_ROMBIOS32 ++ call rombios32_init ++#endif + call rom_scan - pci_irq_list: - db 11, 10, 9, 5; + call _print_bios_banner |