diff options
Diffstat (limited to 'pc-bios')
| -rw-r--r-- | pc-bios/bios.diff | 340 |
1 files changed, 92 insertions, 248 deletions
diff --git a/pc-bios/bios.diff b/pc-bios/bios.diff index 24a22b9bf3..443236a246 100644 --- a/pc-bios/bios.diff +++ b/pc-bios/bios.diff @@ -1,260 +1,104 @@ Index: rombios.c =================================================================== RCS file: /cvsroot/bochs/bochs/bios/rombios.c,v -retrieving revision 1.108 -diff -u -w -r1.108 rombios.c ---- rombios.c 9 Feb 2004 16:48:50 -0000 1.108 -+++ rombios.c 23 May 2004 15:48:52 -0000 -@@ -2254,6 +2254,7 @@ - type = read_byte(get_SS(),buffer+1) & 0x1f; - removable = (read_byte(get_SS(),buffer+0) & 0x80) ? 1 : 0; - mode = read_byte(get_SS(),buffer+96) ? ATA_MODE_PIO32 : ATA_MODE_PIO16; -+ blksize = 2048; +retrieving revision 1.110 +diff -u -w -r1.110 rombios.c +--- rombios.c 31 May 2004 13:11:27 -0000 1.110 ++++ rombios.c 20 Jun 2004 13:10:07 -0000 +@@ -137,6 +137,7 @@ + #define DEBUG_INT16 0 + #define DEBUG_INT1A 0 + #define DEBUG_INT74 0 ++#define DEBUG_APM 0 - write_byte(ebda_seg,&EbdaData->ata.devices[device].device, type); - write_byte(ebda_seg,&EbdaData->ata.devices[device].removable, removable); -@@ -3378,6 +3379,8 @@ - and al,#0x10 - mov ah, al + #define BX_CPU 3 + #define BX_USE_PS2_MOUSE 1 +@@ -145,6 +146,7 @@ + #define BX_SUPPORT_FLOPPY 1 + #define BX_FLOPPY_ON_CNT 37 // 2 seconds + #define BX_PCIBIOS 1 ++#define BX_APM 1 -+ or ecx, ecx -+ je int1586_tick_end - int1586_tick: - in al, #0x61 - and al,#0x10 -@@ -3386,6 +3389,7 @@ - mov ah, al - dec ecx - jnz int1586_tick -+int1586_tick_end: - ASM_END - - break; -@@ -3781,7 +3785,17 @@ - write_word(ebda_seg, 0x0022, mouse_driver_offset); - write_word(ebda_seg, 0x0024, mouse_driver_seg); - mouse_flags_2 = read_byte(ebda_seg, 0x0027); -+ if (mouse_driver_offset == 0 && -+ mouse_driver_seg == 0) { -+ /* remove handler */ -+ if ( (mouse_flags_2 & 0x80) != 0 ) { -+ mouse_flags_2 &= ~0x80; -+ inhibit_mouse_int_and_events(); // disable IRQ12 and packets -+ } -+ } else { -+ /* install handler */ - mouse_flags_2 |= 0x80; -+ } - write_byte(ebda_seg, 0x0027, mouse_flags_2); - CLEAR_CF(); - regs.u.r8.ah = 0; -@@ -4409,7 +4423,8 @@ - mouse_flags_2 = read_byte(ebda_seg, 0x0027); + #define BX_USE_ATADRV 1 + #define BX_ELTORITO_BOOT 1 +@@ -230,17 +232,6 @@ + out dx,ax + MEND - if ( (mouse_flags_2 & 0x80) != 0x80 ) { -- BX_PANIC("int74_function:\n"); -+ // BX_PANIC("int74_function:\n"); -+ return; +-MACRO HALT2 +- ;; the HALT macro is called with the line number of the HALT call. +- ;; The line number is then sent to the PANIC_PORT, causing Bochs/Plex +- ;; to print a BX_PANIC message. This will normally halt the simulation +- ;; with a message such as "BIOS panic at rombios.c, line 4091". +- ;; However, users can choose to make panics non-fatal and continue. +- mov dx,#PANIC_PORT2 +- mov ax,#?1 +- out dx,ax +-MEND +- + MACRO JMP_AP + db 0xea + dw ?2 +@@ -1543,15 +1534,12 @@ } - package_count = mouse_flags_2 & 0x07; -@@ -4833,8 +4848,10 @@ - // --------------------------------------------------------------------------- + if (action & BIOS_PRINTF_HALT) { +- // freeze in a busy loop. If I do a HLT instruction, then in versions +- // 1.3.pre1 and earlier, it will panic without ever updating the VGA +- // display, so the panic message will not be visible. By waiting +- // forever, you are certain to see the panic message on screen. +- // After a few more versions have passed, we can turn this back into +- // a halt or something. +- // do {} while (1); ++ // freeze in a busy loop. + ASM_START +- HALT2(__LINE__) ++ cli ++ halt2_loop: ++ hlt ++ jmp halt2_loop + ASM_END + } + } +@@ -8344,6 +8332,19 @@ + pop ax + iret - void --int13_cdrom(DI, SI, BP, SP, BX, DX, CX, AX, DS, ES, FLAGS) -- Bit16u DI, SI, BP, SP, BX, DX, CX, AX, DS, ES, FLAGS; -+int13_cdrom(DI, DIH, SI, SIH, BP, BPH, SP, SPH, BX, BXH, DX, DXH, CX, CXH, AX, AXH, -+ DS, ES, FLAGS) -+ Bit16u DI, DIH, SI, SIH, BP, BPH, SP, SPH, BX, BXH, DX, DXH, CX, CXH, AX, AXH, -+ DS, ES, FLAGS; - { - Bit16u ebda_seg=read_word(0x0040,0x000E); - Bit8u device, status, locks; -@@ -7692,9 +7709,12 @@ ++ ++;-------------------- ++#if BX_APM ++use32 386 ++#define APM_PROT32 ++#include "apmbios.S" ++use16 386 ++ ++#define APM_REAL ++#include "apmbios.S" ++ ++#endif ++ + ;-------------------- + #if BX_PCIBIOS + use32 386 +@@ -9560,6 +9561,10 @@ + .org 0xf859 ; INT 15h System Services Entry Point + int15_handler: + pushf ++#if BX_APM ++ cmp ah, #0x53 ++ je apm_call ++#endif push ds - push ss - pop ds -- pusha -+ // ebx is modified: BSD 5.2.1 boot loader problem, so we save all -+ // the 32 bit registers. It should be done in all the bios or no 32 -+ // bit register should be used without saving it first. -+ pushad - call _int13_cdrom -- popa -+ popad - pop ds - pop es + push es + pushad +@@ -9570,6 +9575,10 @@ popf -@@ -8401,57 +8421,69 @@ - cmp al, #0x08 - jne pci_pro_f09 - call pci_pro_select_reg -+ push edx - mov dx, di - and dx, #0x03 - add dx, #0x0cfc - in al, dx -+ pop edx - mov cl, al - jmp pci_pro_ok - pci_pro_f09: ;; read configuration word - cmp al, #0x09 - jne pci_pro_f0a - call pci_pro_select_reg -+ push edx - mov dx, di - and dx, #0x02 - add dx, #0x0cfc - in ax, dx -+ pop edx - mov cx, ax - jmp pci_pro_ok - pci_pro_f0a: ;; read configuration dword - cmp al, #0x0a - jne pci_pro_f0b - call pci_pro_select_reg -+ push edx - mov dx, #0x0cfc - in eax, dx -+ pop edx - mov ecx, eax - jmp pci_pro_ok - pci_pro_f0b: ;; write configuration byte - cmp al, #0x0b - jne pci_pro_f0c - call pci_pro_select_reg -+ push edx - mov dx, di - and dx, #0x03 - add dx, #0x0cfc - mov al, cl - out dx, al -+ pop edx - jmp pci_pro_ok - pci_pro_f0c: ;; write configuration word - cmp al, #0x0c - jne pci_pro_f0d - call pci_pro_select_reg -+ push edx - mov dx, di - and dx, #0x02 - add dx, #0x0cfc - mov ax, cx - out dx, ax -+ pop edx - jmp pci_pro_ok - pci_pro_f0d: ;; write configuration dword - cmp al, #0x0d - jne pci_pro_unknown - call pci_pro_select_reg -+ push edx - mov dx, #0x0cfc - mov eax, ecx - out dx, eax -+ pop edx - jmp pci_pro_ok - pci_pro_unknown: - mov ah, #0x81 -@@ -8468,6 +8500,7 @@ - retf - - pci_pro_select_reg: -+ push edx - mov eax, #0x800000 - mov ax, bx - shl eax, #8 -@@ -8476,6 +8509,7 @@ - and al, #0xfc - mov dx, #0x0cf8 - out dx, eax -+ pop edx - ret - - use16 386 -@@ -8536,57 +8570,69 @@ - cmp al, #0x08 - jne pci_real_f09 - call pci_real_select_reg -+ push dx - mov dx, di - and dx, #0x03 - add dx, #0x0cfc - in al, dx -+ pop dx - mov cl, al - jmp pci_real_ok - pci_real_f09: ;; read configuration word - cmp al, #0x09 - jne pci_real_f0a - call pci_real_select_reg -+ push dx - mov dx, di - and dx, #0x02 - add dx, #0x0cfc - in ax, dx -+ pop dx - mov cx, ax - jmp pci_real_ok - pci_real_f0a: ;; read configuration dword - cmp al, #0x0a - jne pci_real_f0b - call pci_real_select_reg -+ push dx - mov dx, #0x0cfc - in eax, dx -+ pop dx - mov ecx, eax - jmp pci_real_ok - pci_real_f0b: ;; write configuration byte - cmp al, #0x0b - jne pci_real_f0c - call pci_real_select_reg -+ push dx - mov dx, di - and dx, #0x03 - add dx, #0x0cfc - mov al, cl - out dx, al -+ pop dx - jmp pci_real_ok - pci_real_f0c: ;; write configuration word - cmp al, #0x0c - jne pci_real_f0d - call pci_real_select_reg -+ push dx - mov dx, di - and dx, #0x02 - add dx, #0x0cfc - mov ax, cx - out dx, ax -+ pop dx - jmp pci_real_ok - pci_real_f0d: ;; write configuration dword - cmp al, #0x0d - jne pci_real_unknown - call pci_real_select_reg -+ push dx - mov dx, #0x0cfc - mov eax, ecx - out dx, eax -+ pop dx - jmp pci_real_ok - pci_real_unknown: - mov ah, #0x81 -@@ -8599,6 +8645,7 @@ - ret + //JMPL(iret_modify_cf) + jmp iret_modify_cf ++#if BX_APM ++apm_call: ++ jmp _apmreal_entry ++#endif - pci_real_select_reg: -+ push dx - mov eax, #0x800000 - mov ax, bx - shl eax, #8 -@@ -8607,6 +8654,7 @@ - and al, #0xfc - mov dx, #0x0cf8 - out dx, eax -+ pop dx - ret - - .align 16 + ;; Protected mode IDT descriptor + ;; |