diff options
Diffstat (limited to 'linux-user/syscall_defs.h')
| -rw-r--r-- | linux-user/syscall_defs.h | 283 |
1 files changed, 283 insertions, 0 deletions
diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h new file mode 100644 index 0000000000..c8f25bb5b4 --- /dev/null +++ b/linux-user/syscall_defs.h @@ -0,0 +1,283 @@ + +/* common syscall defines for all architectures */ + +#define SOCKOP_socket 1 +#define SOCKOP_bind 2 +#define SOCKOP_connect 3 +#define SOCKOP_listen 4 +#define SOCKOP_accept 5 +#define SOCKOP_getsockname 6 +#define SOCKOP_getpeername 7 +#define SOCKOP_socketpair 8 +#define SOCKOP_send 9 +#define SOCKOP_recv 10 +#define SOCKOP_sendto 11 +#define SOCKOP_recvfrom 12 +#define SOCKOP_shutdown 13 +#define SOCKOP_setsockopt 14 +#define SOCKOP_getsockopt 15 +#define SOCKOP_sendmsg 16 +#define SOCKOP_recvmsg 17 + +struct target_timeval { + target_long tv_sec; + target_long tv_usec; +}; + +struct target_iovec { + target_long iov_base; /* Starting address */ + target_long iov_len; /* Number of bytes */ +}; + +struct target_rusage { + struct target_timeval ru_utime; /* user time used */ + struct target_timeval ru_stime; /* system time used */ + target_long ru_maxrss; /* maximum resident set size */ + target_long ru_ixrss; /* integral shared memory size */ + target_long ru_idrss; /* integral unshared data size */ + target_long ru_isrss; /* integral unshared stack size */ + target_long ru_minflt; /* page reclaims */ + target_long ru_majflt; /* page faults */ + target_long ru_nswap; /* swaps */ + target_long ru_inblock; /* block input operations */ + target_long ru_oublock; /* block output operations */ + target_long ru_msgsnd; /* messages sent */ + target_long ru_msgrcv; /* messages received */ + target_long ru_nsignals; /* signals received */ + target_long ru_nvcsw; /* voluntary context switches */ + target_long ru_nivcsw; /* involuntary " */ +}; + +typedef struct { + int val[2]; +} kernel_fsid_t; + +struct statfs { + int f_type; + int f_bsize; + int f_blocks; + int f_bfree; + int f_bavail; + int f_files; + int f_ffree; + kernel_fsid_t f_fsid; + int f_namelen; + int f_spare[6]; +}; + +/* mostly generic signal stuff */ +#define TARGET_SIG_DFL ((target_long)0) /* default signal handling */ +#define TARGET_SIG_IGN ((target_long)1) /* ignore signal */ +#define TARGET_SIG_ERR ((target_long)-1) /* error return from signal */ + +#ifdef TARGET_MIPS +#define TARGET_NSIG 128 +#else +#define TARGET_NSIG 64 +#endif +#define TARGET_NSIG_BPW TARGET_LONG_BITS +#define TARGET_NSIG_WORDS (TARGET_NSIG / TARGET_NSIG_BPW) + +typedef struct { + target_ulong sig[TARGET_NSIG_WORDS]; +} target_sigset_t; + +/* Networking ioctls */ +#define TARGET_SIOCADDRT 0x890B /* add routing table entry */ +#define TARGET_SIOCDELRT 0x890C /* delete routing table entry */ +#define TARGET_SIOCGIFNAME 0x8910 /* get iface name */ +#define TARGET_SIOCSIFLINK 0x8911 /* set iface channel */ +#define TARGET_SIOCGIFCONF 0x8912 /* get iface list */ +#define TARGET_SIOCGIFFLAGS 0x8913 /* get flags */ +#define TARGET_SIOCSIFFLAGS 0x8914 /* set flags */ +#define TARGET_SIOCGIFADDR 0x8915 /* get PA address */ +#define TARGET_SIOCSIFADDR 0x8916 /* set PA address */ +#define TARGET_SIOCGIFDSTADDR 0x8917 /* get remote PA address */ +#define TARGET_SIOCSIFDSTADDR 0x8918 /* set remote PA address */ +#define TARGET_SIOCGIFBRDADDR 0x8919 /* get broadcast PA address */ +#define TARGET_SIOCSIFBRDADDR 0x891a /* set broadcast PA address */ +#define TARGET_SIOCGIFNETMASK 0x891b /* get network PA mask */ +#define TARGET_SIOCSIFNETMASK 0x891c /* set network PA mask */ +#define TARGET_SIOCGIFMETRIC 0x891d /* get metric */ +#define TARGET_SIOCSIFMETRIC 0x891e /* set metric */ +#define TARGET_SIOCGIFMEM 0x891f /* get memory address (BSD) */ +#define TARGET_SIOCSIFMEM 0x8920 /* set memory address (BSD) */ +#define TARGET_SIOCGIFMTU 0x8921 /* get MTU size */ +#define TARGET_SIOCSIFMTU 0x8922 /* set MTU size */ +#define TARGET_SIOCSIFHWADDR 0x8924 /* set hardware address (NI) */ +#define TARGET_SIOCGIFENCAP 0x8925 /* get/set slip encapsulation */ +#define TARGET_SIOCSIFENCAP 0x8926 +#define TARGET_SIOCGIFHWADDR 0x8927 /* Get hardware address */ +#define TARGET_SIOCGIFSLAVE 0x8929 /* Driver slaving support */ +#define TARGET_SIOCSIFSLAVE 0x8930 +#define TARGET_SIOCADDMULTI 0x8931 /* Multicast address lists */ +#define TARGET_SIOCDELMULTI 0x8932 + +/* Bridging control calls */ +#define TARGET_SIOCGIFBR 0x8940 /* Bridging support */ +#define TARGET_SIOCSIFBR 0x8941 /* Set bridging options */ + +#define TARGET_SIOCGIFTXQLEN 0x8942 /* Get the tx queue length */ +#define TARGET_SIOCSIFTXQLEN 0x8943 /* Set the tx queue length */ + +/* ARP cache control calls. */ +#define TARGET_OLD_SIOCDARP 0x8950 /* old delete ARP table entry */ +#define TARGET_OLD_SIOCGARP 0x8951 /* old get ARP table entry */ +#define TARGET_OLD_SIOCSARP 0x8952 /* old set ARP table entry */ +#define TARGET_SIOCDARP 0x8953 /* delete ARP table entry */ +#define TARGET_SIOCGARP 0x8954 /* get ARP table entry */ +#define TARGET_SIOCSARP 0x8955 /* set ARP table entry */ + +/* RARP cache control calls. */ +#define TARGET_SIOCDRARP 0x8960 /* delete RARP table entry */ +#define TARGET_SIOCGRARP 0x8961 /* get RARP table entry */ +#define TARGET_SIOCSRARP 0x8962 /* set RARP table entry */ + +/* Driver configuration calls */ +#define TARGET_SIOCGIFMAP 0x8970 /* Get device parameters */ +#define TARGET_SIOCSIFMAP 0x8971 /* Set device parameters */ + +/* DLCI configuration calls */ +#define TARGET_SIOCADDDLCI 0x8980 /* Create new DLCI device */ +#define TARGET_SIOCDELDLCI 0x8981 /* Delete DLCI device */ + + +/* From <linux/fs.h> */ + +#define TARGET_BLKROSET TARGET_IO(0x12,93) /* set device read-only (0 = read-write) */ +#define TARGET_BLKROGET TARGET_IO(0x12,94) /* get read-only status (0 = read_write) */ +#define TARGET_BLKRRPART TARGET_IO(0x12,95) /* re-read partition table */ +#define TARGET_BLKGETSIZE TARGET_IO(0x12,96) /* return device size /512 (long *arg) */ +#define TARGET_BLKFLSBUF TARGET_IO(0x12,97) /* flush buffer cache */ +#define TARGET_BLKRASET TARGET_IO(0x12,98) /* Set read ahead for block device */ +#define TARGET_BLKRAGET TARGET_IO(0x12,99) /* get current read ahead setting */ +#define TARGET_BLKFRASET TARGET_IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */ +#define TARGET_BLKFRAGET TARGET_IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */ +#define TARGET_BLKSECTSET TARGET_IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */ +#define TARGET_BLKSECTGET TARGET_IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */ +#define TARGET_BLKSSZGET TARGET_IO(0x12,104)/* get block device sector size */ +/* A jump here: 108-111 have been used for various private purposes. */ +#define TARGET_BLKBSZGET TARGET_IOR(0x12,112,sizeof(int)) +#define TARGET_BLKBSZSET TARGET_IOW(0x12,113,sizeof(int)) +#define TARGET_BLKGETSIZE64 TARGET_IOR(0x12,114,sizeof(uint64_t)) /* return device size in bytes (u64 *arg) */ +#define TARGET_FIBMAP TARGET_IO(0x00,1) /* bmap access */ +#define TARGET_FIGETBSZ TARGET_IO(0x00,2) /* get the block size used for bmap */ + +/* cdrom commands */ +#define TARGET_CDROMPAUSE 0x5301 /* Pause Audio Operation */ +#define TARGET_CDROMRESUME 0x5302 /* Resume paused Audio Operation */ +#define TARGET_CDROMPLAYMSF 0x5303 /* Play Audio MSF (struct cdrom_msf) */ +#define TARGET_CDROMPLAYTRKIND 0x5304 /* Play Audio Track/index + (struct cdrom_ti) */ +#define TARGET_CDROMREADTOCHDR 0x5305 /* Read TOC header + (struct cdrom_tochdr) */ +#define TARGET_CDROMREADTOCENTRY 0x5306 /* Read TOC entry + (struct cdrom_tocentry) */ +#define TARGET_CDROMSTOP 0x5307 /* Stop the cdrom drive */ +#define TARGET_CDROMSTART 0x5308 /* Start the cdrom drive */ +#define TARGET_CDROMEJECT 0x5309 /* Ejects the cdrom media */ +#define TARGET_CDROMVOLCTRL 0x530a /* Control output volume + (struct cdrom_volctrl) */ +#define TARGET_CDROMSUBCHNL 0x530b /* Read subchannel data + (struct cdrom_subchnl) */ +#define TARGET_CDROMREADMODE2 0x530c /* Read TARGET_CDROM mode 2 data (2336 Bytes) + (struct cdrom_read) */ +#define TARGET_CDROMREADMODE1 0x530d /* Read TARGET_CDROM mode 1 data (2048 Bytes) + (struct cdrom_read) */ +#define TARGET_CDROMREADAUDIO 0x530e /* (struct cdrom_read_audio) */ +#define TARGET_CDROMEJECT_SW 0x530f /* enable(1)/disable(0) auto-ejecting */ +#define TARGET_CDROMMULTISESSION 0x5310 /* Obtain the start-of-last-session + address of multi session disks + (struct cdrom_multisession) */ +#define TARGET_CDROM_GET_MCN 0x5311 /* Obtain the "Universal Product Code" + if available (struct cdrom_mcn) */ +#define TARGET_CDROM_GET_UPC TARGET_CDROM_GET_MCN /* This one is depricated, + but here anyway for compatability */ +#define TARGET_CDROMRESET 0x5312 /* hard-reset the drive */ +#define TARGET_CDROMVOLREAD 0x5313 /* Get the drive's volume setting + (struct cdrom_volctrl) */ +#define TARGET_CDROMREADRAW 0x5314 /* read data in raw mode (2352 Bytes) + (struct cdrom_read) */ +/* + * These ioctls are used only used in aztcd.c and optcd.c + */ +#define TARGET_CDROMREADCOOKED 0x5315 /* read data in cooked mode */ +#define TARGET_CDROMSEEK 0x5316 /* seek msf address */ + +/* + * This ioctl is only used by the scsi-cd driver. + It is for playing audio in logical block addressing mode. + */ +#define TARGET_CDROMPLAYBLK 0x5317 /* (struct cdrom_blk) */ + +/* + * These ioctls are only used in optcd.c + */ +#define TARGET_CDROMREADALL 0x5318 /* read all 2646 bytes */ + +/* + * These ioctls are (now) only in ide-cd.c for controlling + * drive spindown time. They should be implemented in the + * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10, + * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE... + * -Erik + */ +#define TARGET_CDROMGETSPINDOWN 0x531d +#define TARGET_CDROMSETSPINDOWN 0x531e + +/* + * These ioctls are implemented through the uniform CD-ROM driver + * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM + * drivers are eventually ported to the uniform CD-ROM driver interface. + */ +#define TARGET_CDROMCLOSETRAY 0x5319 /* pendant of CDROMEJECT */ +#define TARGET_CDROM_SET_OPTIONS 0x5320 /* Set behavior options */ +#define TARGET_CDROM_CLEAR_OPTIONS 0x5321 /* Clear behavior options */ +#define TARGET_CDROM_SELECT_SPEED 0x5322 /* Set the CD-ROM speed */ +#define TARGET_CDROM_SELECT_DISC 0x5323 /* Select disc (for juke-boxes) */ +#define TARGET_CDROM_MEDIA_CHANGED 0x5325 /* Check is media changed */ +#define TARGET_CDROM_DRIVE_STATUS 0x5326 /* Get tray position, etc. */ +#define TARGET_CDROM_DISC_STATUS 0x5327 /* Get disc type, etc. */ +#define TARGET_CDROM_CHANGER_NSLOTS 0x5328 /* Get number of slots */ +#define TARGET_CDROM_LOCKDOOR 0x5329 /* lock or unlock door */ +#define TARGET_CDROM_DEBUG 0x5330 /* Turn debug messages on/off */ +#define TARGET_CDROM_GET_CAPABILITY 0x5331 /* get capabilities */ + +/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386. + * Future CDROM ioctls should be kept below 0x537F + */ + +/* This ioctl is only used by sbpcd at the moment */ +#define TARGET_CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */ + /* conflict with SCSI_IOCTL_GET_IDLUN */ + +/* DVD-ROM Specific ioctls */ +#define TARGET_DVD_READ_STRUCT 0x5390 /* Read structure */ +#define TARGET_DVD_WRITE_STRUCT 0x5391 /* Write structure */ +#define TARGET_DVD_AUTH 0x5392 /* Authentication */ + +#define TARGET_CDROM_SEND_PACKET 0x5393 /* send a packet to the drive */ +#define TARGET_CDROM_NEXT_WRITABLE 0x5394 /* get next writable block */ +#define TARGET_CDROM_LAST_WRITTEN 0x5395 /* get last block written on disc */ + +/* HD commands */ + +/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */ +#define TARGET_HDIO_GETGEO 0x0301 /* get device geometry */ +#define TARGET_HDIO_GET_UNMASKINTR 0x0302 /* get current unmask setting */ +#define TARGET_HDIO_GET_MULTCOUNT 0x0304 /* get current IDE blockmode setting */ +#define TARGET_HDIO_GET_IDENTITY 0x0307 /* get IDE identification info */ +#define TARGET_HDIO_GET_KEEPSETTINGS 0x0308 /* get keep-settings-on-reset flag */ +#define TARGET_HDIO_GET_32BIT 0x0309 /* get current io_32bit setting */ +#define TARGET_HDIO_GET_NOWERR 0x030a /* get ignore-write-error flag */ +#define TARGET_HDIO_GET_DMA 0x030b /* get use-dma flag */ +#define TARGET_HDIO_DRIVE_CMD 0x031f /* execute a special drive command */ + +/* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */ +#define TARGET_HDIO_SET_MULTCOUNT 0x0321 /* change IDE blockmode */ +#define TARGET_HDIO_SET_UNMASKINTR 0x0322 /* permit other irqs during I/O */ +#define TARGET_HDIO_SET_KEEPSETTINGS 0x0323 /* keep ioctl settings on reset */ +#define TARGET_HDIO_SET_32BIT 0x0324 /* change io_32bit flags */ +#define TARGET_HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */ +#define TARGET_HDIO_SET_DMA 0x0326 /* change use-dma flag */ +#define TARGET_HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */ |