diff options
Diffstat (limited to 'include/sysemu/char.h')
| -rw-r--r-- | include/sysemu/char.h | 306 |
1 files changed, 306 insertions, 0 deletions
diff --git a/include/sysemu/char.h b/include/sysemu/char.h new file mode 100644 index 0000000000..9d1ea46117 --- /dev/null +++ b/include/sysemu/char.h @@ -0,0 +1,306 @@ +#ifndef QEMU_CHAR_H +#define QEMU_CHAR_H + +#include "qemu-common.h" +#include "qemu/queue.h" +#include "qemu/option.h" +#include "qemu/config-file.h" +#include "block/aio.h" +#include "qapi/qmp/qobject.h" +#include "qapi/qmp/qstring.h" +#include "qemu/main-loop.h" + +/* character device */ + +#define CHR_EVENT_BREAK 0 /* serial break char */ +#define CHR_EVENT_FOCUS 1 /* focus to this terminal (modal input needed) */ +#define CHR_EVENT_OPENED 2 /* new connection established */ +#define CHR_EVENT_MUX_IN 3 /* mux-focus was set to this terminal */ +#define CHR_EVENT_MUX_OUT 4 /* mux-focus will move on */ +#define CHR_EVENT_CLOSED 5 /* connection closed */ + + +#define CHR_IOCTL_SERIAL_SET_PARAMS 1 +typedef struct { + int speed; + int parity; + int data_bits; + int stop_bits; +} QEMUSerialSetParams; + +#define CHR_IOCTL_SERIAL_SET_BREAK 2 + +#define CHR_IOCTL_PP_READ_DATA 3 +#define CHR_IOCTL_PP_WRITE_DATA 4 +#define CHR_IOCTL_PP_READ_CONTROL 5 +#define CHR_IOCTL_PP_WRITE_CONTROL 6 +#define CHR_IOCTL_PP_READ_STATUS 7 +#define CHR_IOCTL_PP_EPP_READ_ADDR 8 +#define CHR_IOCTL_PP_EPP_READ 9 +#define CHR_IOCTL_PP_EPP_WRITE_ADDR 10 +#define CHR_IOCTL_PP_EPP_WRITE 11 +#define CHR_IOCTL_PP_DATA_DIR 12 + +#define CHR_IOCTL_SERIAL_SET_TIOCM 13 +#define CHR_IOCTL_SERIAL_GET_TIOCM 14 + +#define CHR_TIOCM_CTS 0x020 +#define CHR_TIOCM_CAR 0x040 +#define CHR_TIOCM_DSR 0x100 +#define CHR_TIOCM_RI 0x080 +#define CHR_TIOCM_DTR 0x002 +#define CHR_TIOCM_RTS 0x004 + +typedef void IOEventHandler(void *opaque, int event); + +struct CharDriverState { + void (*init)(struct CharDriverState *s); + int (*chr_write)(struct CharDriverState *s, const uint8_t *buf, int len); + GSource *(*chr_add_watch)(struct CharDriverState *s, GIOCondition cond); + void (*chr_update_read_handler)(struct CharDriverState *s); + int (*chr_ioctl)(struct CharDriverState *s, int cmd, void *arg); + int (*get_msgfd)(struct CharDriverState *s); + int (*chr_add_client)(struct CharDriverState *chr, int fd); + IOEventHandler *chr_event; + IOCanReadHandler *chr_can_read; + IOReadHandler *chr_read; + void *handler_opaque; + void (*chr_close)(struct CharDriverState *chr); + void (*chr_accept_input)(struct CharDriverState *chr); + void (*chr_set_echo)(struct CharDriverState *chr, bool echo); + void (*chr_set_fe_open)(struct CharDriverState *chr, int fe_open); + void *opaque; + int idle_tag; + char *label; + char *filename; + int be_open; + int fe_open; + int explicit_fe_open; + int avail_connections; + QemuOpts *opts; + QTAILQ_ENTRY(CharDriverState) next; +}; + +/** + * @qemu_chr_new_from_opts: + * + * Create a new character backend from a QemuOpts list. + * + * @opts see qemu-config.c for a list of valid options + * @init not sure.. + * + * Returns: a new character backend + */ +CharDriverState *qemu_chr_new_from_opts(QemuOpts *opts, + void (*init)(struct CharDriverState *s), + Error **errp); + +/** + * @qemu_chr_new: + * + * Create a new character backend from a URI. + * + * @label the name of the backend + * @filename the URI + * @init not sure.. + * + * Returns: a new character backend + */ +CharDriverState *qemu_chr_new(const char *label, const char *filename, + void (*init)(struct CharDriverState *s)); + +/** + * @qemu_chr_delete: + * + * Destroy a character backend. + */ +void qemu_chr_delete(CharDriverState *chr); + +/** + * @qemu_chr_fe_set_echo: + * + * Ask the backend to override its normal echo setting. This only really + * applies to the stdio backend and is used by the QMP server such that you + * can see what you type if you try to type QMP commands. + * + * @echo true to enable echo, false to disable echo + */ +void qemu_chr_fe_set_echo(struct CharDriverState *chr, bool echo); + +/** + * @qemu_chr_fe_set_open: + * + * Set character frontend open status. This is an indication that the + * front end is ready (or not) to begin doing I/O. + */ +void qemu_chr_fe_set_open(struct CharDriverState *chr, int fe_open); + +/** + * @qemu_chr_fe_printf: + * + * Write to a character backend using a printf style interface. + * + * @fmt see #printf + */ +void qemu_chr_fe_printf(CharDriverState *s, const char *fmt, ...) + GCC_FMT_ATTR(2, 3); + +int qemu_chr_fe_add_watch(CharDriverState *s, GIOCondition cond, + GIOFunc func, void *user_data); + +/** + * @qemu_chr_fe_write: + * + * Write data to a character backend from the front end. This function will + * send data from the front end to the back end. + * + * @buf the data + * @len the number of bytes to send + * + * Returns: the number of bytes consumed + */ +int qemu_chr_fe_write(CharDriverState *s, const uint8_t *buf, int len); + +/** + * @qemu_chr_fe_write_all: + * + * Write data to a character backend from the front end. This function will + * send data from the front end to the back end. Unlike @qemu_chr_fe_write, + * this function will block if the back end cannot consume all of the data + * attempted to be written. + * + * @buf the data + * @len the number of bytes to send + * + * Returns: the number of bytes consumed + */ +int qemu_chr_fe_write_all(CharDriverState *s, const uint8_t *buf, int len); + +/** + * @qemu_chr_fe_ioctl: + * + * Issue a device specific ioctl to a backend. + * + * @cmd see CHR_IOCTL_* + * @arg the data associated with @cmd + * + * Returns: if @cmd is not supported by the backend, -ENOTSUP, otherwise the + * return value depends on the semantics of @cmd + */ +int qemu_chr_fe_ioctl(CharDriverState *s, int cmd, void *arg); + +/** + * @qemu_chr_fe_get_msgfd: + * + * For backends capable of fd passing, return the latest file descriptor passed + * by a client. + * + * Returns: -1 if fd passing isn't supported or there is no pending file + * descriptor. If a file descriptor is returned, subsequent calls to + * this function will return -1 until a client sends a new file + * descriptor. + */ +int qemu_chr_fe_get_msgfd(CharDriverState *s); + +/** + * @qemu_chr_fe_claim: + * + * Claim a backend before using it, should be called before calling + * qemu_chr_add_handlers(). + * + * Returns: -1 if the backend is already in use by another frontend, 0 on + * success. + */ +int qemu_chr_fe_claim(CharDriverState *s); + +/** + * @qemu_chr_fe_claim_no_fail: + * + * Like qemu_chr_fe_claim, but will exit qemu with an error when the + * backend is already in use. + */ +void qemu_chr_fe_claim_no_fail(CharDriverState *s); + +/** + * @qemu_chr_fe_claim: + * + * Release a backend for use by another frontend. + * + * Returns: -1 if the backend is already in use by another frontend, 0 on + * success. + */ +void qemu_chr_fe_release(CharDriverState *s); + +/** + * @qemu_chr_be_can_write: + * + * Determine how much data the front end can currently accept. This function + * returns the number of bytes the front end can accept. If it returns 0, the + * front end cannot receive data at the moment. The function must be polled + * to determine when data can be received. + * + * Returns: the number of bytes the front end can receive via @qemu_chr_be_write + */ +int qemu_chr_be_can_write(CharDriverState *s); + +/** + * @qemu_chr_be_write: + * + * Write data from the back end to the front end. Before issuing this call, + * the caller should call @qemu_chr_be_can_write to determine how much data + * the front end can currently accept. + * + * @buf a buffer to receive data from the front end + * @len the number of bytes to receive from the front end + */ +void qemu_chr_be_write(CharDriverState *s, uint8_t *buf, int len); + + +/** + * @qemu_chr_be_event: + * + * Send an event from the back end to the front end. + * + * @event the event to send + */ +void qemu_chr_be_event(CharDriverState *s, int event); + +void qemu_chr_add_handlers(CharDriverState *s, + IOCanReadHandler *fd_can_read, + IOReadHandler *fd_read, + IOEventHandler *fd_event, + void *opaque); + +void qemu_chr_be_generic_open(CharDriverState *s); +void qemu_chr_accept_input(CharDriverState *s); +int qemu_chr_add_client(CharDriverState *s, int fd); +void qemu_chr_info_print(Monitor *mon, const QObject *ret_data); +void qemu_chr_info(Monitor *mon, QObject **ret_data); +CharDriverState *qemu_chr_find(const char *name); + +QemuOpts *qemu_chr_parse_compat(const char *label, const char *filename); + +void register_char_driver(const char *name, CharDriverState *(*open)(QemuOpts *)); +void register_char_driver_qapi(const char *name, int kind, + void (*parse)(QemuOpts *opts, ChardevBackend *backend, Error **errp)); + +/* add an eventfd to the qemu devices that are polled */ +CharDriverState *qemu_chr_open_eventfd(int eventfd); + +extern int term_escape_char; + +/* memory chardev */ +void qemu_chr_init_mem(CharDriverState *chr); +void qemu_chr_close_mem(CharDriverState *chr); +QString *qemu_chr_mem_to_qs(CharDriverState *chr); +size_t qemu_chr_mem_osize(const CharDriverState *chr); + +CharDriverState *qemu_char_get_next_serial(void); + +/* msmouse */ +CharDriverState *qemu_chr_open_msmouse(void); + +/* baum.c */ +CharDriverState *chr_baum_init(void); + +#endif |