diff options
Diffstat (limited to 'hw')
| -rw-r--r-- | hw/scsi/scsi-disk.c | 407 | ||||
| -rw-r--r-- | hw/scsi/scsi-generic.c | 71 |
2 files changed, 248 insertions, 230 deletions
diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c index aeaf611854..664d634c98 100644 --- a/hw/scsi/scsi-disk.c +++ b/hw/scsi/scsi-disk.c @@ -585,219 +585,228 @@ static uint8_t *scsi_get_buf(SCSIRequest *req) return (uint8_t *)r->iov.iov_base; } -static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf) +int scsi_disk_emulate_vpd_page(SCSIRequest *req, uint8_t *outbuf) { SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); - int buflen = 0; - int start; - - if (req->cmd.buf[1] & 0x1) { - /* Vital product data */ - uint8_t page_code = req->cmd.buf[2]; - - outbuf[buflen++] = s->qdev.type & 0x1f; - outbuf[buflen++] = page_code ; // this page - outbuf[buflen++] = 0x00; - outbuf[buflen++] = 0x00; - start = buflen; - - switch (page_code) { - case 0x00: /* Supported page codes, mandatory */ - { - DPRINTF("Inquiry EVPD[Supported pages] " - "buffer size %zd\n", req->cmd.xfer); - outbuf[buflen++] = 0x00; // list of supported pages (this page) - if (s->serial) { - outbuf[buflen++] = 0x80; // unit serial number - } - outbuf[buflen++] = 0x83; // device identification - if (s->qdev.type == TYPE_DISK) { - outbuf[buflen++] = 0xb0; // block limits - outbuf[buflen++] = 0xb1; /* block device characteristics */ - outbuf[buflen++] = 0xb2; // thin provisioning - } - break; - } - case 0x80: /* Device serial number, optional */ - { - int l; + uint8_t page_code = req->cmd.buf[2]; + int start, buflen = 0; - if (!s->serial) { - DPRINTF("Inquiry (EVPD[Serial number] not supported\n"); - return -1; - } + outbuf[buflen++] = s->qdev.type & 0x1f; + outbuf[buflen++] = page_code; + outbuf[buflen++] = 0x00; + outbuf[buflen++] = 0x00; + start = buflen; - l = strlen(s->serial); - if (l > 36) { - l = 36; - } + switch (page_code) { + case 0x00: /* Supported page codes, mandatory */ + { + DPRINTF("Inquiry EVPD[Supported pages] " + "buffer size %zd\n", req->cmd.xfer); + outbuf[buflen++] = 0x00; /* list of supported pages (this page) */ + if (s->serial) { + outbuf[buflen++] = 0x80; /* unit serial number */ + } + outbuf[buflen++] = 0x83; /* device identification */ + if (s->qdev.type == TYPE_DISK) { + outbuf[buflen++] = 0xb0; /* block limits */ + outbuf[buflen++] = 0xb1; /* block device characteristics */ + outbuf[buflen++] = 0xb2; /* thin provisioning */ + } + break; + } + case 0x80: /* Device serial number, optional */ + { + int l; - DPRINTF("Inquiry EVPD[Serial number] " - "buffer size %zd\n", req->cmd.xfer); - memcpy(outbuf+buflen, s->serial, l); - buflen += l; - break; + if (!s->serial) { + DPRINTF("Inquiry (EVPD[Serial number] not supported\n"); + return -1; } - case 0x83: /* Device identification page, mandatory */ - { - const char *str = s->serial ?: blk_name(s->qdev.conf.blk); - int max_len = s->serial ? 20 : 255 - 8; - int id_len = strlen(str); + l = strlen(s->serial); + if (l > 36) { + l = 36; + } - if (id_len > max_len) { - id_len = max_len; - } - DPRINTF("Inquiry EVPD[Device identification] " - "buffer size %zd\n", req->cmd.xfer); - - outbuf[buflen++] = 0x2; // ASCII - outbuf[buflen++] = 0; // not officially assigned - outbuf[buflen++] = 0; // reserved - outbuf[buflen++] = id_len; // length of data following - memcpy(outbuf+buflen, str, id_len); - buflen += id_len; - - if (s->qdev.wwn) { - outbuf[buflen++] = 0x1; // Binary - outbuf[buflen++] = 0x3; // NAA - outbuf[buflen++] = 0; // reserved - outbuf[buflen++] = 8; - stq_be_p(&outbuf[buflen], s->qdev.wwn); - buflen += 8; - } + DPRINTF("Inquiry EVPD[Serial number] " + "buffer size %zd\n", req->cmd.xfer); + memcpy(outbuf + buflen, s->serial, l); + buflen += l; + break; + } - if (s->qdev.port_wwn) { - outbuf[buflen++] = 0x61; // SAS / Binary - outbuf[buflen++] = 0x93; // PIV / Target port / NAA - outbuf[buflen++] = 0; // reserved - outbuf[buflen++] = 8; - stq_be_p(&outbuf[buflen], s->qdev.port_wwn); - buflen += 8; - } + case 0x83: /* Device identification page, mandatory */ + { + const char *str = s->serial ?: blk_name(s->qdev.conf.blk); + int max_len = s->serial ? 20 : 255 - 8; + int id_len = strlen(str); - if (s->port_index) { - outbuf[buflen++] = 0x61; // SAS / Binary - outbuf[buflen++] = 0x94; // PIV / Target port / relative target port - outbuf[buflen++] = 0; // reserved - outbuf[buflen++] = 4; - stw_be_p(&outbuf[buflen + 2], s->port_index); - buflen += 4; - } - break; + if (id_len > max_len) { + id_len = max_len; } - case 0xb0: /* block limits */ - { - unsigned int unmap_sectors = - s->qdev.conf.discard_granularity / s->qdev.blocksize; - unsigned int min_io_size = - s->qdev.conf.min_io_size / s->qdev.blocksize; - unsigned int opt_io_size = - s->qdev.conf.opt_io_size / s->qdev.blocksize; - unsigned int max_unmap_sectors = - s->max_unmap_size / s->qdev.blocksize; - unsigned int max_io_sectors = - s->max_io_size / s->qdev.blocksize; - - if (s->qdev.type == TYPE_ROM) { - DPRINTF("Inquiry (EVPD[%02X] not supported for CDROM\n", - page_code); - return -1; - } - if (s->qdev.type == TYPE_DISK) { - int max_transfer_blk = blk_get_max_transfer(s->qdev.conf.blk); - int max_io_sectors_blk = - max_transfer_blk / s->qdev.blocksize; - - max_io_sectors = - MIN_NON_ZERO(max_io_sectors_blk, max_io_sectors); - - /* min_io_size and opt_io_size can't be greater than - * max_io_sectors */ - if (min_io_size) { - min_io_size = MIN(min_io_size, max_io_sectors); - } - if (opt_io_size) { - opt_io_size = MIN(opt_io_size, max_io_sectors); - } - } - /* required VPD size with unmap support */ - buflen = 0x40; - memset(outbuf + 4, 0, buflen - 4); - - outbuf[4] = 0x1; /* wsnz */ - - /* optimal transfer length granularity */ - outbuf[6] = (min_io_size >> 8) & 0xff; - outbuf[7] = min_io_size & 0xff; - - /* maximum transfer length */ - outbuf[8] = (max_io_sectors >> 24) & 0xff; - outbuf[9] = (max_io_sectors >> 16) & 0xff; - outbuf[10] = (max_io_sectors >> 8) & 0xff; - outbuf[11] = max_io_sectors & 0xff; - - /* optimal transfer length */ - outbuf[12] = (opt_io_size >> 24) & 0xff; - outbuf[13] = (opt_io_size >> 16) & 0xff; - outbuf[14] = (opt_io_size >> 8) & 0xff; - outbuf[15] = opt_io_size & 0xff; - - /* max unmap LBA count, default is 1GB */ - outbuf[20] = (max_unmap_sectors >> 24) & 0xff; - outbuf[21] = (max_unmap_sectors >> 16) & 0xff; - outbuf[22] = (max_unmap_sectors >> 8) & 0xff; - outbuf[23] = max_unmap_sectors & 0xff; - - /* max unmap descriptors, 255 fit in 4 kb with an 8-byte header. */ - outbuf[24] = 0; - outbuf[25] = 0; - outbuf[26] = 0; - outbuf[27] = 255; - - /* optimal unmap granularity */ - outbuf[28] = (unmap_sectors >> 24) & 0xff; - outbuf[29] = (unmap_sectors >> 16) & 0xff; - outbuf[30] = (unmap_sectors >> 8) & 0xff; - outbuf[31] = unmap_sectors & 0xff; - - /* max write same size */ - outbuf[36] = 0; - outbuf[37] = 0; - outbuf[38] = 0; - outbuf[39] = 0; - - outbuf[40] = (max_io_sectors >> 24) & 0xff; - outbuf[41] = (max_io_sectors >> 16) & 0xff; - outbuf[42] = (max_io_sectors >> 8) & 0xff; - outbuf[43] = max_io_sectors & 0xff; - break; + DPRINTF("Inquiry EVPD[Device identification] " + "buffer size %zd\n", req->cmd.xfer); + + outbuf[buflen++] = 0x2; /* ASCII */ + outbuf[buflen++] = 0; /* not officially assigned */ + outbuf[buflen++] = 0; /* reserved */ + outbuf[buflen++] = id_len; /* length of data following */ + memcpy(outbuf + buflen, str, id_len); + buflen += id_len; + + if (s->qdev.wwn) { + outbuf[buflen++] = 0x1; /* Binary */ + outbuf[buflen++] = 0x3; /* NAA */ + outbuf[buflen++] = 0; /* reserved */ + outbuf[buflen++] = 8; + stq_be_p(&outbuf[buflen], s->qdev.wwn); + buflen += 8; } - case 0xb1: /* block device characteristics */ - { - buflen = 8; - outbuf[4] = (s->rotation_rate >> 8) & 0xff; - outbuf[5] = s->rotation_rate & 0xff; - outbuf[6] = 0; - outbuf[7] = 0; - break; + + if (s->qdev.port_wwn) { + outbuf[buflen++] = 0x61; /* SAS / Binary */ + outbuf[buflen++] = 0x93; /* PIV / Target port / NAA */ + outbuf[buflen++] = 0; /* reserved */ + outbuf[buflen++] = 8; + stq_be_p(&outbuf[buflen], s->qdev.port_wwn); + buflen += 8; } - case 0xb2: /* thin provisioning */ - { - buflen = 8; - outbuf[4] = 0; - outbuf[5] = 0xe0; /* unmap & write_same 10/16 all supported */ - outbuf[6] = s->qdev.conf.discard_granularity ? 2 : 1; - outbuf[7] = 0; - break; + + if (s->port_index) { + outbuf[buflen++] = 0x61; /* SAS / Binary */ + + /* PIV/Target port/relative target port */ + outbuf[buflen++] = 0x94; + + outbuf[buflen++] = 0; /* reserved */ + outbuf[buflen++] = 4; + stw_be_p(&outbuf[buflen + 2], s->port_index); + buflen += 4; } - default: + break; + } + case 0xb0: /* block limits */ + { + unsigned int unmap_sectors = + s->qdev.conf.discard_granularity / s->qdev.blocksize; + unsigned int min_io_size = + s->qdev.conf.min_io_size / s->qdev.blocksize; + unsigned int opt_io_size = + s->qdev.conf.opt_io_size / s->qdev.blocksize; + unsigned int max_unmap_sectors = + s->max_unmap_size / s->qdev.blocksize; + unsigned int max_io_sectors = + s->max_io_size / s->qdev.blocksize; + + if (s->qdev.type == TYPE_ROM) { + DPRINTF("Inquiry (EVPD[%02X] not supported for CDROM\n", + page_code); return -1; } - /* done with EVPD */ - assert(buflen - start <= 255); - outbuf[start - 1] = buflen - start; - return buflen; + if (s->qdev.type == TYPE_DISK) { + int max_transfer_blk = blk_get_max_transfer(s->qdev.conf.blk); + int max_io_sectors_blk = + max_transfer_blk / s->qdev.blocksize; + + max_io_sectors = + MIN_NON_ZERO(max_io_sectors_blk, max_io_sectors); + + /* min_io_size and opt_io_size can't be greater than + * max_io_sectors */ + if (min_io_size) { + min_io_size = MIN(min_io_size, max_io_sectors); + } + if (opt_io_size) { + opt_io_size = MIN(opt_io_size, max_io_sectors); + } + } + /* required VPD size with unmap support */ + buflen = 0x40; + memset(outbuf + 4, 0, buflen - 4); + + outbuf[4] = 0x1; /* wsnz */ + + /* optimal transfer length granularity */ + outbuf[6] = (min_io_size >> 8) & 0xff; + outbuf[7] = min_io_size & 0xff; + + /* maximum transfer length */ + outbuf[8] = (max_io_sectors >> 24) & 0xff; + outbuf[9] = (max_io_sectors >> 16) & 0xff; + outbuf[10] = (max_io_sectors >> 8) & 0xff; + outbuf[11] = max_io_sectors & 0xff; + + /* optimal transfer length */ + outbuf[12] = (opt_io_size >> 24) & 0xff; + outbuf[13] = (opt_io_size >> 16) & 0xff; + outbuf[14] = (opt_io_size >> 8) & 0xff; + outbuf[15] = opt_io_size & 0xff; + + /* max unmap LBA count, default is 1GB */ + outbuf[20] = (max_unmap_sectors >> 24) & 0xff; + outbuf[21] = (max_unmap_sectors >> 16) & 0xff; + outbuf[22] = (max_unmap_sectors >> 8) & 0xff; + outbuf[23] = max_unmap_sectors & 0xff; + + /* max unmap descriptors, 255 fit in 4 kb with an 8-byte header */ + outbuf[24] = 0; + outbuf[25] = 0; + outbuf[26] = 0; + outbuf[27] = 255; + + /* optimal unmap granularity */ + outbuf[28] = (unmap_sectors >> 24) & 0xff; + outbuf[29] = (unmap_sectors >> 16) & 0xff; + outbuf[30] = (unmap_sectors >> 8) & 0xff; + outbuf[31] = unmap_sectors & 0xff; + + /* max write same size */ + outbuf[36] = 0; + outbuf[37] = 0; + outbuf[38] = 0; + outbuf[39] = 0; + + outbuf[40] = (max_io_sectors >> 24) & 0xff; + outbuf[41] = (max_io_sectors >> 16) & 0xff; + outbuf[42] = (max_io_sectors >> 8) & 0xff; + outbuf[43] = max_io_sectors & 0xff; + break; + } + case 0xb1: /* block device characteristics */ + { + buflen = 8; + outbuf[4] = (s->rotation_rate >> 8) & 0xff; + outbuf[5] = s->rotation_rate & 0xff; + outbuf[6] = 0; + outbuf[7] = 0; + break; + } + case 0xb2: /* thin provisioning */ + { + buflen = 8; + outbuf[4] = 0; + outbuf[5] = 0xe0; /* unmap & write_same 10/16 all supported */ + outbuf[6] = s->qdev.conf.discard_granularity ? 2 : 1; + outbuf[7] = 0; + break; + } + default: + return -1; + } + /* done with EVPD */ + assert(buflen - start <= 255); + outbuf[start - 1] = buflen - start; + return buflen; +} + +static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf) +{ + SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); + int buflen = 0; + + if (req->cmd.buf[1] & 0x1) { + /* Vital product data */ + return scsi_disk_emulate_vpd_page(req, outbuf); } /* Standard INQUIRY data */ @@ -3039,6 +3048,10 @@ static Property scsi_block_properties[] = { DEFINE_PROP_DRIVE("drive", SCSIDiskState, qdev.conf.blk), DEFINE_PROP_BOOL("share-rw", SCSIDiskState, qdev.conf.share_rw, false), DEFINE_PROP_UINT16("rotation_rate", SCSIDiskState, rotation_rate, 0), + DEFINE_PROP_UINT64("max_unmap_size", SCSIDiskState, max_unmap_size, + DEFAULT_MAX_UNMAP_SIZE), + DEFINE_PROP_UINT64("max_io_size", SCSIDiskState, max_io_size, + DEFAULT_MAX_IO_SIZE), DEFINE_PROP_INT32("scsi_version", SCSIDiskState, qdev.default_scsi_version, -1), DEFINE_PROP_END_OF_LIST(), diff --git a/hw/scsi/scsi-generic.c b/hw/scsi/scsi-generic.c index 03bce8ff39..a04a704bbf 100644 --- a/hw/scsi/scsi-generic.c +++ b/hw/scsi/scsi-generic.c @@ -142,6 +142,43 @@ static int execute_command(BlockBackend *blk, return 0; } +static void scsi_handle_inquiry_reply(SCSIGenericReq *r, SCSIDevice *s) +{ + /* + * EVPD set to zero returns the standard INQUIRY data. + * + * Check if scsi_version is unset (-1) to avoid re-defining it + * each time an INQUIRY with standard data is received. + * scsi_version is initialized with -1 in scsi_generic_reset + * and scsi_disk_reset, making sure that we'll set the + * scsi_version after a reset. If the version field of the + * INQUIRY response somehow changes after a guest reboot, + * we'll be able to keep track of it. + * + * On SCSI-2 and older, first 3 bits of byte 2 is the + * ANSI-approved version, while on later versions the + * whole byte 2 contains the version. Check if we're dealing + * with a newer version and, in that case, assign the + * whole byte. + */ + if (s->scsi_version == -1 && !(r->req.cmd.buf[1] & 0x01)) { + s->scsi_version = r->buf[2] & 0x07; + if (s->scsi_version > 2) { + s->scsi_version = r->buf[2]; + } + } + if (s->type == TYPE_DISK && r->req.cmd.buf[2] == 0xb0) { + uint32_t max_transfer = + blk_get_max_transfer(s->conf.blk) / s->blocksize; + + assert(max_transfer); + stl_be_p(&r->buf[8], max_transfer); + /* Also take care of the opt xfer len. */ + stl_be_p(&r->buf[12], + MIN_NON_ZERO(max_transfer, ldl_be_p(&r->buf[12]))); + } +} + static void scsi_read_complete(void * opaque, int ret) { SCSIGenericReq *r = (SCSIGenericReq *)opaque; @@ -194,39 +231,7 @@ static void scsi_read_complete(void * opaque, int ret) } } if (r->req.cmd.buf[0] == INQUIRY) { - /* - * EVPD set to zero returns the standard INQUIRY data. - * - * Check if scsi_version is unset (-1) to avoid re-defining it - * each time an INQUIRY with standard data is received. - * scsi_version is initialized with -1 in scsi_generic_reset - * and scsi_disk_reset, making sure that we'll set the - * scsi_version after a reset. If the version field of the - * INQUIRY response somehow changes after a guest reboot, - * we'll be able to keep track of it. - * - * On SCSI-2 and older, first 3 bits of byte 2 is the - * ANSI-approved version, while on later versions the - * whole byte 2 contains the version. Check if we're dealing - * with a newer version and, in that case, assign the - * whole byte. - */ - if (s->scsi_version == -1 && !(r->req.cmd.buf[1] & 0x01)) { - s->scsi_version = r->buf[2] & 0x07; - if (s->scsi_version > 2) { - s->scsi_version = r->buf[2]; - } - } - if (s->type == TYPE_DISK && r->req.cmd.buf[2] == 0xb0) { - uint32_t max_transfer = - blk_get_max_transfer(s->conf.blk) / s->blocksize; - - assert(max_transfer); - stl_be_p(&r->buf[8], max_transfer); - /* Also take care of the opt xfer len. */ - stl_be_p(&r->buf[12], - MIN_NON_ZERO(max_transfer, ldl_be_p(&r->buf[12]))); - } + scsi_handle_inquiry_reply(r, s); } scsi_req_data(&r->req, len); scsi_req_unref(&r->req); |