diff options
Diffstat (limited to 'hw')
| -rw-r--r-- | hw/display/sm501.c | 170 | ||||
| -rw-r--r-- | hw/sh4/r2d.c | 11 |
2 files changed, 133 insertions, 48 deletions
diff --git a/hw/display/sm501.c b/hw/display/sm501.c index 6e74200216..571a7e606c 100644 --- a/hw/display/sm501.c +++ b/hw/display/sm501.c @@ -59,8 +59,8 @@ #define SM501_DPRINTF(fmt, ...) do {} while (0) #endif - #define MMIO_BASE_OFFSET 0x3e00000 +#define MMIO_SIZE 0x200000 /* SM501 register definitions taken from "linux/include/linux/sm501-regs.h" */ @@ -465,6 +465,10 @@ typedef struct SM501State { uint32_t local_mem_size_index; uint8_t *local_mem; MemoryRegion local_mem_region; + MemoryRegion mmio_region; + MemoryRegion system_config_region; + MemoryRegion disp_ctrl_region; + MemoryRegion twoD_engine_region; uint32_t last_width; uint32_t last_height; @@ -1404,21 +1408,8 @@ static const GraphicHwOps sm501_ops = { .gfx_update = sm501_update_display, }; -void sm501_init(MemoryRegion *address_space_mem, uint32_t base, - uint32_t local_mem_bytes, qemu_irq irq, Chardev *chr) +static void sm501_reset(SM501State *s) { - SM501State *s; - DeviceState *dev; - MemoryRegion *sm501_system_config = g_new(MemoryRegion, 1); - MemoryRegion *sm501_disp_ctrl = g_new(MemoryRegion, 1); - MemoryRegion *sm501_2d_engine = g_new(MemoryRegion, 1); - - /* allocate management data region */ - s = g_new0(SM501State, 1); - s->base = base; - s->local_mem_size_index = get_local_mem_size_index(local_mem_bytes); - SM501_DPRINTF("local mem size=%x. index=%d\n", get_local_mem_size(s), - s->local_mem_size_index); s->system_control = 0x00100000; /* 2D engine FIFO empty */ /* Bits 17 (SH), 7 (CDR), 6:5 (Test), 2:0 (Bus) are all supposed * to be determined at reset by GPIO lines which set config bits. @@ -1429,51 +1420,138 @@ void sm501_init(MemoryRegion *address_space_mem, uint32_t base, * BUS = 0 : Hitachi SH3/SH4 */ s->misc_control = SM501_MISC_DAC_POWER; + s->gpio_31_0_control = 0; + s->gpio_63_32_control = 0; + s->dram_control = 0; s->arbitration_control = 0x05146732; + s->irq_mask = 0; + s->misc_timing = 0; + s->power_mode_control = 0; s->dc_panel_control = 0x00010000; /* FIFO level 3 */ s->dc_crt_control = 0x00010000; + s->twoD_control = 0; +} - /* allocate local memory */ - memory_region_init_ram(&s->local_mem_region, NULL, "sm501.local", - local_mem_bytes, &error_fatal); +static void sm501_init(SM501State *s, DeviceState *dev, uint32_t base, + uint32_t local_mem_bytes) +{ + s->base = base; + s->local_mem_size_index = get_local_mem_size_index(local_mem_bytes); + SM501_DPRINTF("sm501 local mem size=%x. index=%d\n", get_local_mem_size(s), + s->local_mem_size_index); + + /* local memory */ + memory_region_init_ram(&s->local_mem_region, OBJECT(dev), "sm501.local", + get_local_mem_size(s), &error_fatal); vmstate_register_ram_global(&s->local_mem_region); memory_region_set_log(&s->local_mem_region, true, DIRTY_MEMORY_VGA); s->local_mem = memory_region_get_ram_ptr(&s->local_mem_region); - memory_region_add_subregion(address_space_mem, base, &s->local_mem_region); - - /* map mmio */ - memory_region_init_io(sm501_system_config, NULL, &sm501_system_config_ops, - s, "sm501-system-config", 0x6c); - memory_region_add_subregion(address_space_mem, base + MMIO_BASE_OFFSET, - sm501_system_config); - memory_region_init_io(sm501_disp_ctrl, NULL, &sm501_disp_ctrl_ops, s, + + /* mmio */ + memory_region_init(&s->mmio_region, OBJECT(dev), "sm501.mmio", MMIO_SIZE); + memory_region_init_io(&s->system_config_region, OBJECT(dev), + &sm501_system_config_ops, s, + "sm501-system-config", 0x6c); + memory_region_add_subregion(&s->mmio_region, SM501_SYS_CONFIG, + &s->system_config_region); + memory_region_init_io(&s->disp_ctrl_region, OBJECT(dev), + &sm501_disp_ctrl_ops, s, "sm501-disp-ctrl", 0x1000); - memory_region_add_subregion(address_space_mem, - base + MMIO_BASE_OFFSET + SM501_DC, - sm501_disp_ctrl); - memory_region_init_io(sm501_2d_engine, NULL, &sm501_2d_engine_ops, s, + memory_region_add_subregion(&s->mmio_region, SM501_DC, + &s->disp_ctrl_region); + memory_region_init_io(&s->twoD_engine_region, OBJECT(dev), + &sm501_2d_engine_ops, s, "sm501-2d-engine", 0x54); - memory_region_add_subregion(address_space_mem, - base + MMIO_BASE_OFFSET + SM501_2D_ENGINE, - sm501_2d_engine); + memory_region_add_subregion(&s->mmio_region, SM501_2D_ENGINE, + &s->twoD_engine_region); + + /* create qemu graphic console */ + s->con = graphic_console_init(DEVICE(dev), 0, &sm501_ops, s); +} + +#define TYPE_SYSBUS_SM501 "sysbus-sm501" +#define SYSBUS_SM501(obj) \ + OBJECT_CHECK(SM501SysBusState, (obj), TYPE_SYSBUS_SM501) + +typedef struct { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + SM501State state; + uint32_t vram_size; + uint32_t base; + void *chr_state; +} SM501SysBusState; + +static void sm501_realize_sysbus(DeviceState *dev, Error **errp) +{ + SM501SysBusState *s = SYSBUS_SM501(dev); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + DeviceState *usb_dev; + + sm501_init(&s->state, dev, s->base, s->vram_size); + if (get_local_mem_size(&s->state) != s->vram_size) { + error_setg(errp, "Invalid VRAM size, nearest valid size is %" PRIu32, + get_local_mem_size(&s->state)); + return; + } + sysbus_init_mmio(sbd, &s->state.local_mem_region); + sysbus_init_mmio(sbd, &s->state.mmio_region); /* bridge to usb host emulation module */ - dev = qdev_create(NULL, "sysbus-ohci"); - qdev_prop_set_uint32(dev, "num-ports", 2); - qdev_prop_set_uint64(dev, "dma-offset", base); - qdev_init_nofail(dev); - sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, - base + MMIO_BASE_OFFSET + SM501_USB_HOST); - sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq); + usb_dev = qdev_create(NULL, "sysbus-ohci"); + qdev_prop_set_uint32(usb_dev, "num-ports", 2); + qdev_prop_set_uint64(usb_dev, "dma-offset", s->base); + qdev_init_nofail(usb_dev); + memory_region_add_subregion(&s->state.mmio_region, SM501_USB_HOST, + sysbus_mmio_get_region(SYS_BUS_DEVICE(usb_dev), 0)); + sysbus_pass_irq(sbd, SYS_BUS_DEVICE(usb_dev)); /* bridge to serial emulation module */ - if (chr) { - serial_mm_init(address_space_mem, - base + MMIO_BASE_OFFSET + SM501_UART0, 2, + if (s->chr_state) { + serial_mm_init(&s->state.mmio_region, SM501_UART0, 2, NULL, /* TODO : chain irq to IRL */ - 115200, chr, DEVICE_NATIVE_ENDIAN); + 115200, s->chr_state, DEVICE_NATIVE_ENDIAN); } +} - /* create qemu graphic console */ - s->con = graphic_console_init(DEVICE(dev), 0, &sm501_ops, s); +static Property sm501_sysbus_properties[] = { + DEFINE_PROP_UINT32("vram-size", SM501SysBusState, vram_size, 0), + DEFINE_PROP_UINT32("base", SM501SysBusState, base, 0), + DEFINE_PROP_PTR("chr-state", SM501SysBusState, chr_state), + DEFINE_PROP_END_OF_LIST(), +}; + +static void sm501_reset_sysbus(DeviceState *dev) +{ + SM501SysBusState *s = SYSBUS_SM501(dev); + sm501_reset(&s->state); } + +static void sm501_sysbus_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = sm501_realize_sysbus; + set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories); + dc->desc = "SM501 Multimedia Companion"; + dc->props = sm501_sysbus_properties; + dc->reset = sm501_reset_sysbus; + /* Note: pointer property "chr-state" may remain null, thus + * no need for dc->cannot_instantiate_with_device_add_yet = true; + */ +} + +static const TypeInfo sm501_sysbus_info = { + .name = TYPE_SYSBUS_SM501, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(SM501SysBusState), + .class_init = sm501_sysbus_class_init, +}; + +static void sm501_register_types(void) +{ + type_register_static(&sm501_sysbus_info); +} + +type_init(sm501_register_types) diff --git a/hw/sh4/r2d.c b/hw/sh4/r2d.c index 6d06968f8b..8f520cec1c 100644 --- a/hw/sh4/r2d.c +++ b/hw/sh4/r2d.c @@ -277,8 +277,15 @@ static void r2d_init(MachineState *machine) sysbus_connect_irq(busdev, 2, irq[PCI_INTC]); sysbus_connect_irq(busdev, 3, irq[PCI_INTD]); - sm501_init(address_space_mem, 0x10000000, SM501_VRAM_SIZE, - irq[SM501], serial_hds[2]); + dev = qdev_create(NULL, "sysbus-sm501"); + busdev = SYS_BUS_DEVICE(dev); + qdev_prop_set_uint32(dev, "vram-size", SM501_VRAM_SIZE); + qdev_prop_set_uint32(dev, "base", 0x10000000); + qdev_prop_set_ptr(dev, "chr-state", serial_hds[2]); + qdev_init_nofail(dev); + sysbus_mmio_map(busdev, 0, 0x10000000); + sysbus_mmio_map(busdev, 1, 0x13e00000); + sysbus_connect_irq(busdev, 0, irq[SM501]); /* onboard CF (True IDE mode, Master only). */ dinfo = drive_get(IF_IDE, 0, 0); |