aboutsummaryrefslogtreecommitdiff
path: root/hw
diff options
context:
space:
mode:
Diffstat (limited to 'hw')
-rw-r--r--hw/arm/highbank.c61
-rw-r--r--hw/arm/vexpress.c19
-rw-r--r--hw/char/cadence_uart.c4
-rw-r--r--hw/cpu/a15mpcore.c4
-rw-r--r--hw/dma/omap_dma.c11
-rw-r--r--hw/sd/pl181.c2
6 files changed, 79 insertions, 22 deletions
diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c
index 3a2fb4c81c..be264d3eb3 100644
--- a/hw/arm/highbank.c
+++ b/hw/arm/highbank.c
@@ -183,20 +183,25 @@ type_init(highbank_regs_register_types)
static struct arm_boot_info highbank_binfo;
+enum cxmachines {
+ CALXEDA_HIGHBANK,
+ CALXEDA_MIDWAY,
+};
+
/* ram_size must be set to match the upper bound of memory in the
* device tree (linux/arch/arm/boot/dts/highbank.dts), which is
* normally 0xff900000 or -m 4089. When running this board on a
* 32-bit host, set the reg value of memory to 0xf7ff00000 in the
* device tree and pass -m 2047 to QEMU.
*/
-static void highbank_init(QEMUMachineInitArgs *args)
+static void calxeda_init(QEMUMachineInitArgs *args, enum cxmachines machine)
{
ram_addr_t ram_size = args->ram_size;
const char *cpu_model = args->cpu_model;
const char *kernel_filename = args->kernel_filename;
const char *kernel_cmdline = args->kernel_cmdline;
const char *initrd_filename = args->initrd_filename;
- DeviceState *dev;
+ DeviceState *dev = NULL;
SysBusDevice *busdev;
qemu_irq *irqp;
qemu_irq pic[128];
@@ -208,7 +213,14 @@ static void highbank_init(QEMUMachineInitArgs *args)
char *sysboot_filename;
if (!cpu_model) {
- cpu_model = "cortex-a9";
+ switch (machine) {
+ case CALXEDA_HIGHBANK:
+ cpu_model = "cortex-a9";
+ break;
+ case CALXEDA_MIDWAY:
+ cpu_model = "cortex-a15";
+ break;
+ }
}
for (n = 0; n < smp_cpus; n++) {
@@ -246,7 +258,19 @@ static void highbank_init(QEMUMachineInitArgs *args)
}
}
- dev = qdev_create(NULL, "a9mpcore_priv");
+ switch (machine) {
+ case CALXEDA_HIGHBANK:
+ dev = qdev_create(NULL, "l2x0");
+ qdev_init_nofail(dev);
+ busdev = SYS_BUS_DEVICE(dev);
+ sysbus_mmio_map(busdev, 0, 0xfff12000);
+
+ dev = qdev_create(NULL, "a9mpcore_priv");
+ break;
+ case CALXEDA_MIDWAY:
+ dev = qdev_create(NULL, "a15mpcore_priv");
+ break;
+ }
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC);
qdev_init_nofail(dev);
@@ -260,11 +284,6 @@ static void highbank_init(QEMUMachineInitArgs *args)
pic[n] = qdev_get_gpio_in(dev, n);
}
- dev = qdev_create(NULL, "l2x0");
- qdev_init_nofail(dev);
- busdev = SYS_BUS_DEVICE(dev);
- sysbus_mmio_map(busdev, 0, 0xfff12000);
-
dev = qdev_create(NULL, "sp804");
qdev_prop_set_uint32(dev, "freq0", 150000000);
qdev_prop_set_uint32(dev, "freq1", 150000000);
@@ -324,6 +343,16 @@ static void highbank_init(QEMUMachineInitArgs *args)
arm_load_kernel(ARM_CPU(first_cpu), &highbank_binfo);
}
+static void highbank_init(QEMUMachineInitArgs *args)
+{
+ calxeda_init(args, CALXEDA_HIGHBANK);
+}
+
+static void midway_init(QEMUMachineInitArgs *args)
+{
+ calxeda_init(args, CALXEDA_MIDWAY);
+}
+
static QEMUMachine highbank_machine = {
.name = "highbank",
.desc = "Calxeda Highbank (ECX-1000)",
@@ -333,9 +362,19 @@ static QEMUMachine highbank_machine = {
DEFAULT_MACHINE_OPTIONS,
};
-static void highbank_machine_init(void)
+static QEMUMachine midway_machine = {
+ .name = "midway",
+ .desc = "Calxeda Midway (ECX-2000)",
+ .init = midway_init,
+ .block_default_type = IF_SCSI,
+ .max_cpus = 4,
+ DEFAULT_MACHINE_OPTIONS,
+};
+
+static void calxeda_machines_init(void)
{
qemu_register_machine(&highbank_machine);
+ qemu_register_machine(&midway_machine);
}
-machine_init(highbank_machine_init);
+machine_init(calxeda_machines_init);
diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c
index fd18b60532..7d1b8233cd 100644
--- a/hw/arm/vexpress.c
+++ b/hw/arm/vexpress.c
@@ -67,6 +67,7 @@ enum {
VE_CLCD,
VE_NORFLASH0,
VE_NORFLASH1,
+ VE_NORFLASHALIAS,
VE_SRAM,
VE_VIDEORAM,
VE_ETHERNET,
@@ -104,9 +105,11 @@ static hwaddr motherboard_legacy_map[] = {
[VE_VIDEORAM] = 0x4c000000,
[VE_ETHERNET] = 0x4e000000,
[VE_USB] = 0x4f000000,
+ [VE_NORFLASHALIAS] = -1, /* not present */
};
static hwaddr motherboard_aseries_map[] = {
+ [VE_NORFLASHALIAS] = 0,
/* CS0: 0x08000000 .. 0x0c000000 */
[VE_NORFLASH0] = 0x08000000,
/* CS4: 0x0c000000 .. 0x10000000 */
@@ -400,10 +403,13 @@ static void vexpress_common_init(const VEDBoardInfo *daughterboard,
qemu_irq pic[64];
uint32_t sys_id;
DriveInfo *dinfo;
+ pflash_t *pflash0;
ram_addr_t vram_size, sram_size;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *vram = g_new(MemoryRegion, 1);
MemoryRegion *sram = g_new(MemoryRegion, 1);
+ MemoryRegion *flashalias = g_new(MemoryRegion, 1);
+ MemoryRegion *flash0mem;
const hwaddr *map = daughterboard->motherboard_map;
int i;
@@ -471,15 +477,24 @@ static void vexpress_common_init(const VEDBoardInfo *daughterboard,
sysbus_create_simple("pl111", map[VE_CLCD], pic[14]);
dinfo = drive_get_next(IF_PFLASH);
- if (!pflash_cfi01_register(map[VE_NORFLASH0], NULL, "vexpress.flash0",
+ pflash0 = pflash_cfi01_register(map[VE_NORFLASH0], NULL, "vexpress.flash0",
VEXPRESS_FLASH_SIZE, dinfo ? dinfo->bdrv : NULL,
VEXPRESS_FLASH_SECT_SIZE,
VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE, 4,
- 0x00, 0x89, 0x00, 0x18, 0)) {
+ 0x00, 0x89, 0x00, 0x18, 0);
+ if (!pflash0) {
fprintf(stderr, "vexpress: error registering flash 0.\n");
exit(1);
}
+ if (map[VE_NORFLASHALIAS] != -1) {
+ /* Map flash 0 as an alias into low memory */
+ flash0mem = sysbus_mmio_get_region(SYS_BUS_DEVICE(pflash0), 0);
+ memory_region_init_alias(flashalias, NULL, "vexpress.flashalias",
+ flash0mem, 0, VEXPRESS_FLASH_SIZE);
+ memory_region_add_subregion(sysmem, map[VE_NORFLASHALIAS], flashalias);
+ }
+
dinfo = drive_get_next(IF_PFLASH);
if (!pflash_cfi01_register(map[VE_NORFLASH1], NULL, "vexpress.flash1",
VEXPRESS_FLASH_SIZE, dinfo ? dinfo->bdrv : NULL,
diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c
index 131370a74b..4d457f8c65 100644
--- a/hw/char/cadence_uart.c
+++ b/hw/char/cadence_uart.c
@@ -157,7 +157,9 @@ static void uart_rx_reset(UartState *s)
{
s->rx_wpos = 0;
s->rx_count = 0;
- qemu_chr_accept_input(s->chr);
+ if (s->chr) {
+ qemu_chr_accept_input(s->chr);
+ }
s->r[R_SR] |= UART_SR_INTR_REMPTY;
s->r[R_SR] &= ~UART_SR_INTR_RFUL;
diff --git a/hw/cpu/a15mpcore.c b/hw/cpu/a15mpcore.c
index 967b0809f3..c736257f24 100644
--- a/hw/cpu/a15mpcore.c
+++ b/hw/cpu/a15mpcore.c
@@ -82,12 +82,12 @@ static int a15mp_priv_init(SysBusDevice *dev)
static Property a15mp_priv_properties[] = {
DEFINE_PROP_UINT32("num-cpu", A15MPPrivState, num_cpu, 1),
/* The Cortex-A15MP may have anything from 0 to 224 external interrupt
- * IRQ lines (with another 32 internal). We default to 64+32, which
+ * IRQ lines (with another 32 internal). We default to 128+32, which
* is the number provided by the Cortex-A15MP test chip in the
* Versatile Express A15 development board.
* Other boards may differ and should set this property appropriately.
*/
- DEFINE_PROP_UINT32("num-irq", A15MPPrivState, num_irq, 96),
+ DEFINE_PROP_UINT32("num-irq", A15MPPrivState, num_irq, 160),
DEFINE_PROP_END_OF_LIST(),
};
diff --git a/hw/dma/omap_dma.c b/hw/dma/omap_dma.c
index a81ffc4026..0e8cccd27f 100644
--- a/hw/dma/omap_dma.c
+++ b/hw/dma/omap_dma.c
@@ -248,7 +248,7 @@ static void omap_dma_deactivate_channel(struct omap_dma_s *s,
/* Don't deactive the channel if it is synchronized and the DMA request is
active */
- if (ch->sync && ch->enable && (s->dma->drqbmp & (1 << ch->sync)))
+ if (ch->sync && ch->enable && (s->dma->drqbmp & (1ULL << ch->sync)))
return;
if (ch->active) {
@@ -268,8 +268,9 @@ static void omap_dma_enable_channel(struct omap_dma_s *s,
/* TODO: theoretically if ch->sync && ch->prefetch &&
* !s->dma->drqbmp[ch->sync], we should also activate and fetch
* from source and then stall until signalled. */
- if ((!ch->sync) || (s->dma->drqbmp & (1 << ch->sync)))
+ if ((!ch->sync) || (s->dma->drqbmp & (1ULL << ch->sync))) {
omap_dma_activate_channel(s, ch);
+ }
}
}
@@ -1551,12 +1552,12 @@ static void omap_dma_request(void *opaque, int drq, int req)
struct omap_dma_s *s = (struct omap_dma_s *) opaque;
/* The request pins are level triggered in QEMU. */
if (req) {
- if (~s->dma->drqbmp & (1 << drq)) {
- s->dma->drqbmp |= 1 << drq;
+ if (~s->dma->drqbmp & (1ULL << drq)) {
+ s->dma->drqbmp |= 1ULL << drq;
omap_dma_process_request(s, drq);
}
} else
- s->dma->drqbmp &= ~(1 << drq);
+ s->dma->drqbmp &= ~(1ULL << drq);
}
/* XXX: this won't be needed once soc_dma knows about clocks. */
diff --git a/hw/sd/pl181.c b/hw/sd/pl181.c
index 4b1723418d..f5eb1e4012 100644
--- a/hw/sd/pl181.c
+++ b/hw/sd/pl181.c
@@ -175,7 +175,7 @@ static void pl181_send_command(pl181_state *s)
if (rlen < 0)
goto error;
if (s->cmd & PL181_CMD_RESPONSE) {
-#define RWORD(n) ((response[n] << 24) | (response[n + 1] << 16) \
+#define RWORD(n) (((uint32_t)response[n] << 24) | (response[n + 1] << 16) \
| (response[n + 2] << 8) | response[n + 3])
if (rlen == 0 || (rlen == 4 && (s->cmd & PL181_CMD_LONGRESP)))
goto error;
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 10:40:08 +0000