diff options
Diffstat (limited to 'hw')
| -rw-r--r-- | hw/block/virtio-blk.c | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c index 8798d13bc4..c159a3d5f7 100644 --- a/hw/block/virtio-blk.c +++ b/hw/block/virtio-blk.c @@ -169,6 +169,30 @@ out: aio_context_release(blk_get_aio_context(s->conf.conf.blk)); } +static void virtio_blk_discard_write_zeroes_complete(void *opaque, int ret) +{ + VirtIOBlockReq *req = opaque; + VirtIOBlock *s = req->dev; + bool is_write_zeroes = (virtio_ldl_p(VIRTIO_DEVICE(s), &req->out.type) & + ~VIRTIO_BLK_T_BARRIER) == VIRTIO_BLK_T_WRITE_ZEROES; + + aio_context_acquire(blk_get_aio_context(s->conf.conf.blk)); + if (ret) { + if (virtio_blk_handle_rw_error(req, -ret, false, is_write_zeroes)) { + goto out; + } + } + + virtio_blk_req_complete(req, VIRTIO_BLK_S_OK); + if (is_write_zeroes) { + block_acct_done(blk_get_stats(s->blk), &req->acct); + } + virtio_blk_free_request(req); + +out: + aio_context_release(blk_get_aio_context(s->conf.conf.blk)); +} + #ifdef __linux__ typedef struct { @@ -502,6 +526,84 @@ static bool virtio_blk_sect_range_ok(VirtIOBlock *dev, return true; } +static uint8_t virtio_blk_handle_discard_write_zeroes(VirtIOBlockReq *req, + struct virtio_blk_discard_write_zeroes *dwz_hdr, bool is_write_zeroes) +{ + VirtIOBlock *s = req->dev; + VirtIODevice *vdev = VIRTIO_DEVICE(s); + uint64_t sector; + uint32_t num_sectors, flags, max_sectors; + uint8_t err_status; + int bytes; + + sector = virtio_ldq_p(vdev, &dwz_hdr->sector); + num_sectors = virtio_ldl_p(vdev, &dwz_hdr->num_sectors); + flags = virtio_ldl_p(vdev, &dwz_hdr->flags); + max_sectors = is_write_zeroes ? s->conf.max_write_zeroes_sectors : + s->conf.max_discard_sectors; + + /* + * max_sectors is at most BDRV_REQUEST_MAX_SECTORS, this check + * make us sure that "num_sectors << BDRV_SECTOR_BITS" can fit in + * the integer variable. + */ + if (unlikely(num_sectors > max_sectors)) { + err_status = VIRTIO_BLK_S_IOERR; + goto err; + } + + bytes = num_sectors << BDRV_SECTOR_BITS; + + if (unlikely(!virtio_blk_sect_range_ok(s, sector, bytes))) { + err_status = VIRTIO_BLK_S_IOERR; + goto err; + } + + /* + * The device MUST set the status byte to VIRTIO_BLK_S_UNSUPP for discard + * and write zeroes commands if any unknown flag is set. + */ + if (unlikely(flags & ~VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP)) { + err_status = VIRTIO_BLK_S_UNSUPP; + goto err; + } + + if (is_write_zeroes) { /* VIRTIO_BLK_T_WRITE_ZEROES */ + int blk_aio_flags = 0; + + if (flags & VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP) { + blk_aio_flags |= BDRV_REQ_MAY_UNMAP; + } + + block_acct_start(blk_get_stats(s->blk), &req->acct, bytes, + BLOCK_ACCT_WRITE); + + blk_aio_pwrite_zeroes(s->blk, sector << BDRV_SECTOR_BITS, + bytes, blk_aio_flags, + virtio_blk_discard_write_zeroes_complete, req); + } else { /* VIRTIO_BLK_T_DISCARD */ + /* + * The device MUST set the status byte to VIRTIO_BLK_S_UNSUPP for + * discard commands if the unmap flag is set. + */ + if (unlikely(flags & VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP)) { + err_status = VIRTIO_BLK_S_UNSUPP; + goto err; + } + + blk_aio_pdiscard(s->blk, sector << BDRV_SECTOR_BITS, bytes, + virtio_blk_discard_write_zeroes_complete, req); + } + + return VIRTIO_BLK_S_OK; + +err: + if (is_write_zeroes) { + block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_WRITE); + } + return err_status; +} + static int virtio_blk_handle_request(VirtIOBlockReq *req, MultiReqBuffer *mrb) { uint32_t type; @@ -603,6 +705,47 @@ static int virtio_blk_handle_request(VirtIOBlockReq *req, MultiReqBuffer *mrb) virtio_blk_free_request(req); break; } + /* + * VIRTIO_BLK_T_DISCARD and VIRTIO_BLK_T_WRITE_ZEROES are defined with + * VIRTIO_BLK_T_OUT flag set. We masked this flag in the switch statement, + * so we must mask it for these requests, then we will check if it is set. + */ + case VIRTIO_BLK_T_DISCARD & ~VIRTIO_BLK_T_OUT: + case VIRTIO_BLK_T_WRITE_ZEROES & ~VIRTIO_BLK_T_OUT: + { + struct virtio_blk_discard_write_zeroes dwz_hdr; + size_t out_len = iov_size(out_iov, out_num); + bool is_write_zeroes = (type & ~VIRTIO_BLK_T_BARRIER) == + VIRTIO_BLK_T_WRITE_ZEROES; + uint8_t err_status; + + /* + * Unsupported if VIRTIO_BLK_T_OUT is not set or the request contains + * more than one segment. + */ + if (unlikely(!(type & VIRTIO_BLK_T_OUT) || + out_len > sizeof(dwz_hdr))) { + virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP); + virtio_blk_free_request(req); + return 0; + } + + if (unlikely(iov_to_buf(out_iov, out_num, 0, &dwz_hdr, + sizeof(dwz_hdr)) != sizeof(dwz_hdr))) { + virtio_error(vdev, "virtio-blk discard/write_zeroes header" + " too short"); + return -1; + } + + err_status = virtio_blk_handle_discard_write_zeroes(req, &dwz_hdr, + is_write_zeroes); + if (err_status != VIRTIO_BLK_S_OK) { + virtio_blk_req_complete(req, err_status); + virtio_blk_free_request(req); + } + + break; + } default: virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP); virtio_blk_free_request(req); @@ -782,6 +925,24 @@ static void virtio_blk_update_config(VirtIODevice *vdev, uint8_t *config) blkcfg.alignment_offset = 0; blkcfg.wce = blk_enable_write_cache(s->blk); virtio_stw_p(vdev, &blkcfg.num_queues, s->conf.num_queues); + if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_DISCARD)) { + virtio_stl_p(vdev, &blkcfg.max_discard_sectors, + s->conf.max_discard_sectors); + virtio_stl_p(vdev, &blkcfg.discard_sector_alignment, + blk_size >> BDRV_SECTOR_BITS); + /* + * We support only one segment per request since multiple segments + * are not widely used and there are no userspace APIs that allow + * applications to submit multiple segments in a single call. + */ + virtio_stl_p(vdev, &blkcfg.max_discard_seg, 1); + } + if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_WRITE_ZEROES)) { + virtio_stl_p(vdev, &blkcfg.max_write_zeroes_sectors, + s->conf.max_write_zeroes_sectors); + blkcfg.write_zeroes_may_unmap = 1; + virtio_stl_p(vdev, &blkcfg.max_write_zeroes_seg, 1); + } memcpy(config, &blkcfg, s->config_size); } @@ -973,6 +1134,25 @@ static void virtio_blk_device_realize(DeviceState *dev, Error **errp) return; } + if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_DISCARD) && + (!conf->max_discard_sectors || + conf->max_discard_sectors > BDRV_REQUEST_MAX_SECTORS)) { + error_setg(errp, "invalid max-discard-sectors property (%" PRIu32 ")" + ", must be between 1 and %d", + conf->max_discard_sectors, (int)BDRV_REQUEST_MAX_SECTORS); + return; + } + + if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_WRITE_ZEROES) && + (!conf->max_write_zeroes_sectors || + conf->max_write_zeroes_sectors > BDRV_REQUEST_MAX_SECTORS)) { + error_setg(errp, "invalid max-write-zeroes-sectors property (%" PRIu32 + "), must be between 1 and %d", + conf->max_write_zeroes_sectors, + (int)BDRV_REQUEST_MAX_SECTORS); + return; + } + virtio_blk_set_config_size(s, s->host_features); virtio_init(vdev, "virtio-blk", VIRTIO_ID_BLOCK, s->config_size); @@ -1050,6 +1230,10 @@ static Property virtio_blk_properties[] = { VIRTIO_BLK_F_DISCARD, true), DEFINE_PROP_BIT64("write-zeroes", VirtIOBlock, host_features, VIRTIO_BLK_F_WRITE_ZEROES, true), + DEFINE_PROP_UINT32("max-discard-sectors", VirtIOBlock, + conf.max_discard_sectors, BDRV_REQUEST_MAX_SECTORS), + DEFINE_PROP_UINT32("max-write-zeroes-sectors", VirtIOBlock, + conf.max_write_zeroes_sectors, BDRV_REQUEST_MAX_SECTORS), DEFINE_PROP_END_OF_LIST(), }; |