aboutsummaryrefslogtreecommitdiff
path: root/hw
diff options
context:
space:
mode:
Diffstat (limited to 'hw')
-rw-r--r--hw/pflash_cfi01.c44
-rw-r--r--hw/pflash_cfi02.c83
2 files changed, 75 insertions, 52 deletions
diff --git a/hw/pflash_cfi01.c b/hw/pflash_cfi01.c
index ee0c3baab1..b03f623cb1 100644
--- a/hw/pflash_cfi01.c
+++ b/hw/pflash_cfi01.c
@@ -283,8 +283,12 @@ static void pflash_write(pflash_t *pfl, target_phys_addr_t offset,
TARGET_FMT_plx "\n",
__func__, offset, pfl->sector_len);
- memset(p + offset, 0xff, pfl->sector_len);
- pflash_update(pfl, offset, pfl->sector_len);
+ if (!pfl->ro) {
+ memset(p + offset, 0xff, pfl->sector_len);
+ pflash_update(pfl, offset, pfl->sector_len);
+ } else {
+ pfl->status |= 0x20; /* Block erase error */
+ }
pfl->status |= 0x80; /* Ready! */
break;
case 0x50: /* Clear status bits */
@@ -323,8 +327,12 @@ static void pflash_write(pflash_t *pfl, target_phys_addr_t offset,
case 0x10: /* Single Byte Program */
case 0x40: /* Single Byte Program */
DPRINTF("%s: Single Byte Program\n", __func__);
- pflash_data_write(pfl, offset, value, width, be);
- pflash_update(pfl, offset, width);
+ if (!pfl->ro) {
+ pflash_data_write(pfl, offset, value, width, be);
+ pflash_update(pfl, offset, width);
+ } else {
+ pfl->status |= 0x10; /* Programming error */
+ }
pfl->status |= 0x80; /* Ready! */
pfl->wcycle = 0;
break;
@@ -372,7 +380,11 @@ static void pflash_write(pflash_t *pfl, target_phys_addr_t offset,
case 2:
switch (pfl->cmd) {
case 0xe8: /* Block write */
- pflash_data_write(pfl, offset, value, width, be);
+ if (!pfl->ro) {
+ pflash_data_write(pfl, offset, value, width, be);
+ } else {
+ pfl->status |= 0x10; /* Programming error */
+ }
pfl->status |= 0x80;
@@ -382,8 +394,12 @@ static void pflash_write(pflash_t *pfl, target_phys_addr_t offset,
DPRINTF("%s: block write finished\n", __func__);
pfl->wcycle++;
- /* Flush the entire write buffer onto backing storage. */
- pflash_update(pfl, offset & mask, pfl->writeblock_size);
+ if (!pfl->ro) {
+ /* Flush the entire write buffer onto backing storage. */
+ pflash_update(pfl, offset & mask, pfl->writeblock_size);
+ } else {
+ pfl->status |= 0x10; /* Programming error */
+ }
}
pfl->counter--;
@@ -607,13 +623,13 @@ pflash_t *pflash_cfi01_register(target_phys_addr_t base,
}
bdrv_attach_dev_nofail(pfl->bs, pfl);
}
-#if 0 /* XXX: there should be a bit to set up read-only,
- * the same way the hardware does (with WP pin).
- */
- pfl->ro = 1;
-#else
- pfl->ro = 0;
-#endif
+
+ if (pfl->bs) {
+ pfl->ro = bdrv_is_read_only(pfl->bs);
+ } else {
+ pfl->ro = 0;
+ }
+
pfl->timer = qemu_new_timer_ns(vm_clock, pflash_timer, pfl);
pfl->base = base;
pfl->sector_len = sector_len;
diff --git a/hw/pflash_cfi02.c b/hw/pflash_cfi02.c
index 2ca0fd4560..3e2002e4b3 100644
--- a/hw/pflash_cfi02.c
+++ b/hw/pflash_cfi02.c
@@ -330,35 +330,37 @@ static void pflash_write (pflash_t *pfl, target_phys_addr_t offset,
DPRINTF("%s: write data offset " TARGET_FMT_plx " %08x %d\n",
__func__, offset, value, width);
p = pfl->storage;
- switch (width) {
- case 1:
- p[offset] &= value;
- pflash_update(pfl, offset, 1);
- break;
- case 2:
- if (be) {
- p[offset] &= value >> 8;
- p[offset + 1] &= value;
- } else {
+ if (!pfl->ro) {
+ switch (width) {
+ case 1:
p[offset] &= value;
- p[offset + 1] &= value >> 8;
+ pflash_update(pfl, offset, 1);
+ break;
+ case 2:
+ if (be) {
+ p[offset] &= value >> 8;
+ p[offset + 1] &= value;
+ } else {
+ p[offset] &= value;
+ p[offset + 1] &= value >> 8;
+ }
+ pflash_update(pfl, offset, 2);
+ break;
+ case 4:
+ if (be) {
+ p[offset] &= value >> 24;
+ p[offset + 1] &= value >> 16;
+ p[offset + 2] &= value >> 8;
+ p[offset + 3] &= value;
+ } else {
+ p[offset] &= value;
+ p[offset + 1] &= value >> 8;
+ p[offset + 2] &= value >> 16;
+ p[offset + 3] &= value >> 24;
+ }
+ pflash_update(pfl, offset, 4);
+ break;
}
- pflash_update(pfl, offset, 2);
- break;
- case 4:
- if (be) {
- p[offset] &= value >> 24;
- p[offset + 1] &= value >> 16;
- p[offset + 2] &= value >> 8;
- p[offset + 3] &= value;
- } else {
- p[offset] &= value;
- p[offset + 1] &= value >> 8;
- p[offset + 2] &= value >> 16;
- p[offset + 3] &= value >> 24;
- }
- pflash_update(pfl, offset, 4);
- break;
}
pfl->status = 0x00 | ~(value & 0x80);
/* Let's pretend write is immediate */
@@ -404,9 +406,11 @@ static void pflash_write (pflash_t *pfl, target_phys_addr_t offset,
}
/* Chip erase */
DPRINTF("%s: start chip erase\n", __func__);
- memset(pfl->storage, 0xFF, pfl->chip_len);
+ if (!pfl->ro) {
+ memset(pfl->storage, 0xFF, pfl->chip_len);
+ pflash_update(pfl, 0, pfl->chip_len);
+ }
pfl->status = 0x00;
- pflash_update(pfl, 0, pfl->chip_len);
/* Let's wait 5 seconds before chip erase is done */
qemu_mod_timer(pfl->timer,
qemu_get_clock_ns(vm_clock) + (get_ticks_per_sec() * 5));
@@ -417,8 +421,10 @@ static void pflash_write (pflash_t *pfl, target_phys_addr_t offset,
offset &= ~(pfl->sector_len - 1);
DPRINTF("%s: start sector erase at " TARGET_FMT_plx "\n", __func__,
offset);
- memset(p + offset, 0xFF, pfl->sector_len);
- pflash_update(pfl, offset, pfl->sector_len);
+ if (!pfl->ro) {
+ memset(p + offset, 0xFF, pfl->sector_len);
+ pflash_update(pfl, offset, pfl->sector_len);
+ }
pfl->status = 0x00;
/* Let's wait 1/2 second before sector erase is done */
qemu_mod_timer(pfl->timer,
@@ -645,16 +651,17 @@ pflash_t *pflash_cfi02_register(target_phys_addr_t base,
}
bdrv_attach_dev_nofail(pfl->bs, pfl);
}
+
pflash_setup_mappings(pfl);
pfl->rom_mode = 1;
memory_region_add_subregion(get_system_memory(), pfl->base, &pfl->mem);
-#if 0 /* XXX: there should be a bit to set up read-only,
- * the same way the hardware does (with WP pin).
- */
- pfl->ro = 1;
-#else
- pfl->ro = 0;
-#endif
+
+ if (pfl->bs) {
+ pfl->ro = bdrv_is_read_only(pfl->bs);
+ } else {
+ pfl->ro = 0;
+ }
+
pfl->timer = qemu_new_timer_ns(vm_clock, pflash_timer, pfl);
pfl->sector_len = sector_len;
pfl->width = width;
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 22:34:01 +0000