diff options
Diffstat (limited to 'hw')
-rw-r--r-- | hw/boards.h | 1 | ||||
-rw-r--r-- | hw/devices.h | 7 | ||||
-rw-r--r-- | hw/nseries.c | 479 | ||||
-rw-r--r-- | hw/omap.h | 11 | ||||
-rw-r--r-- | hw/omap2.c | 13 | ||||
-rw-r--r-- | hw/tsc210x.c | 22 |
6 files changed, 323 insertions, 210 deletions
diff --git a/hw/boards.h b/hw/boards.h index 4e4f29cdd0..2d67a707a6 100644 --- a/hw/boards.h +++ b/hw/boards.h @@ -86,6 +86,7 @@ extern QEMUMachine palmte_machine; /* nseries.c */ extern QEMUMachine n800_machine; +extern QEMUMachine n810_machine; /* gumstix.c */ extern QEMUMachine connex_machine; diff --git a/hw/devices.h b/hw/devices.h index 869b34f3cc..948abc5faf 100644 --- a/hw/devices.h +++ b/hw/devices.h @@ -23,11 +23,16 @@ struct uwire_slave_s *tsc2102_init(qemu_irq pint, AudioState *audio); struct uwire_slave_s *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav, AudioState *audio); struct i2s_codec_s *tsc210x_codec(struct uwire_slave_s *chip); -uint32_t tsc210x_txrx(void *opaque, uint32_t value); +uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len); void tsc210x_set_transform(struct uwire_slave_s *chip, struct mouse_transform_info_s *info); void tsc210x_key_event(struct uwire_slave_s *chip, int key, int down); +/* tsc2005.c */ +void *tsc2005_init(qemu_irq pintdav); +uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len); +void tsc2005_set_transform(void *opaque, struct mouse_transform_info_s *info); + /* stellaris_input.c */ void stellaris_gamepad_init(int n, qemu_irq *irq, const int *keycode); diff --git a/hw/nseries.c b/hw/nseries.c index be4ed2c74a..8d578fcb19 100644 --- a/hw/nseries.c +++ b/hw/nseries.c @@ -37,7 +37,11 @@ struct n800_s { struct omap_mpu_state_s *cpu; struct rfbi_chip_s blizzard; - struct uwire_slave_s *ts; + struct { + void *opaque; + uint32_t (*txrx)(void *opaque, uint32_t value, int len); + struct uwire_slave_s *chip; + } ts; i2c_bus *i2c; int keymap[0x80]; @@ -48,34 +52,38 @@ struct n800_s { }; /* GPIO pins */ -#define N800_TUSB_ENABLE_GPIO 0 +#define N8X0_TUSB_ENABLE_GPIO 0 #define N800_MMC2_WP_GPIO 8 #define N800_UNKNOWN_GPIO0 9 /* out */ #define N800_UNKNOWN_GPIO1 10 /* out */ #define N800_CAM_TURN_GPIO 12 +#define N810_GPS_RESET_GPIO 12 #define N800_BLIZZARD_POWERDOWN_GPIO 15 #define N800_MMC1_WP_GPIO 23 #define N8X0_ONENAND_GPIO 26 +#define N810_BLIZZARD_RESET_GPIO 30 #define N800_UNKNOWN_GPIO2 53 /* out */ #define N8X0_TUSB_INT_GPIO 58 -#define N800_BT_WKUP_GPIO 61 -#define N800_STI_GPIO 62 +#define N8X0_BT_WKUP_GPIO 61 +#define N8X0_STI_GPIO 62 #define N8X0_CBUS_SEL_GPIO 64 -#define N8X0_CBUS_CLK_GPIO 65 /* sure? */ -#define N8X0_CBUS_DAT_GPIO 66 -#define N800_WLAN_IRQ_GPIO 87 -#define N800_BT_RESET_GPIO 92 -#define N800_TEA5761_CS_GPIO 93 +#define N8X0_CBUS_DAT_GPIO 65 +#define N8X0_CBUS_CLK_GPIO 66 +#define N8X0_WLAN_IRQ_GPIO 87 +#define N8X0_BT_RESET_GPIO 92 +#define N8X0_TEA5761_CS_GPIO 93 #define N800_UNKNOWN_GPIO 94 +#define N810_TSC_RESET_GPIO 94 #define N800_CAM_ACT_GPIO 95 -#define N800_MMC_CS_GPIO 96 -#define N800_WLAN_PWR_GPIO 97 +#define N810_GPS_WAKEUP_GPIO 95 +#define N8X0_MMC_CS_GPIO 96 +#define N8X0_WLAN_PWR_GPIO 97 #define N8X0_BT_HOST_WKUP_GPIO 98 #define N800_UNKNOWN_GPIO3 101 /* out */ #define N810_KB_LOCK_GPIO 102 #define N800_TSC_TS_GPIO 103 -#define N810_TSC2005_GPIO 106 -#define N800_HEADPHONE_GPIO 107 +#define N810_TSC_TS_GPIO 106 +#define N8X0_HEADPHONE_GPIO 107 #define N8X0_RETU_GPIO 108 #define N800_TSC_KP_IRQ_GPIO 109 #define N810_KEYBOARD_GPIO 109 @@ -83,7 +91,8 @@ struct n800_s { #define N810_SLIDE_GPIO 110 #define N8X0_TAHVO_GPIO 111 #define N800_UNKNOWN_GPIO4 112 /* out */ -#define N810_TSC_RESET_GPIO 118 +#define N810_SLEEPX_LED_GPIO 112 +#define N810_TSC_UNKNOWN_GPIO 118 /* out */ #define N800_TSC_RESET_GPIO 119 /* ? */ #define N8X0_TMP105_GPIO 125 @@ -108,10 +117,10 @@ static void n800_mmc_cs_cb(void *opaque, int line, int level) printf("%s: MMC slot %i active\n", __FUNCTION__, level + 1); } -static void n800_gpio_setup(struct n800_s *s) +static void n8x0_gpio_setup(struct n800_s *s) { qemu_irq *mmc_cs = qemu_allocate_irqs(n800_mmc_cs_cb, s->cpu->mmc, 1); - omap2_gpio_out_set(s->cpu->gpif, N800_MMC_CS_GPIO, mmc_cs[0]); + omap2_gpio_out_set(s->cpu->gpif, N8X0_MMC_CS_GPIO, mmc_cs[0]); qemu_irq_lower(omap2_gpio_in_get(s->cpu->gpif, N800_BAT_COVER_GPIO)[0]); } @@ -126,7 +135,7 @@ static void n8x0_nand_setup(struct n800_s *s) N8X0_ONENAND_GPIO)[0])); } -static void n800_i2c_setup(struct n800_s *s) +static void n8x0_i2c_setup(struct n800_s *s) { qemu_irq tmp_irq = omap2_gpio_in_get(s->cpu->gpif, N8X0_TMP105_GPIO)[0]; @@ -144,6 +153,18 @@ static void n800_i2c_setup(struct n800_s *s) } /* Touchscreen and keypad controller */ +static struct mouse_transform_info_s n800_pointercal = { + .x = 800, + .y = 480, + .a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 }, +}; + +static struct mouse_transform_info_s n810_pointercal = { + .x = 800, + .y = 480, + .a = { 15041, 148, -4731056, 171, -10238, 35933380, 65536 }, +}; + #define RETU_KEYCODE 61 /* F3 */ static void n800_key_event(void *opaque, int keycode) @@ -157,7 +178,7 @@ static void n800_key_event(void *opaque, int keycode) return; } - tsc210x_key_event(s->ts, code, !(keycode & 0x80)); + tsc210x_key_event(s->ts.chip, code, !(keycode & 0x80)); } static const int n800_keys[16] = { @@ -179,13 +200,7 @@ static const int n800_keys[16] = { -1, }; -static struct mouse_transform_info_s n800_pointercal = { - .x = 800, - .y = 480, - .a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 }, -}; - -static void n800_tsc_setup(struct n800_s *s) +static void n800_tsc_kbd_setup(struct n800_s *s) { int i; @@ -195,7 +210,9 @@ static void n800_tsc_setup(struct n800_s *s) qemu_irq kbirq = omap2_gpio_in_get(s->cpu->gpif, N800_TSC_KP_IRQ_GPIO)[0]; qemu_irq dav = omap2_gpio_in_get(s->cpu->gpif, N800_TSC_TS_GPIO)[0]; - s->ts = tsc2301_init(penirq, kbirq, dav, 0); + s->ts.chip = tsc2301_init(penirq, kbirq, dav, 0); + s->ts.opaque = s->ts.chip->opaque; + s->ts.txrx = tsc210x_txrx; for (i = 0; i < 0x80; i ++) s->keymap[i] = -1; @@ -205,7 +222,17 @@ static void n800_tsc_setup(struct n800_s *s) qemu_add_kbd_event_handler(n800_key_event, s); - tsc210x_set_transform(s->ts, &n800_pointercal); + tsc210x_set_transform(s->ts.chip, &n800_pointercal); +} + +static void n810_tsc_setup(struct n800_s *s) +{ + qemu_irq pintdav = omap2_gpio_in_get(s->cpu->gpif, N810_TSC_TS_GPIO)[0]; + + s->ts.opaque = tsc2005_init(pintdav); + s->ts.txrx = tsc2005_txrx; + + tsc2005_set_transform(s->ts.opaque, &n810_pointercal); } /* LCD MIPI DBI-C controller (URAL) */ @@ -252,11 +279,15 @@ static void mipid_reset(struct mipid_s *s) s->gamma = 0; } -static uint32_t mipid_txrx(void *opaque, uint32_t cmd) +static uint32_t mipid_txrx(void *opaque, uint32_t cmd, int len) { struct mipid_s *s = (struct mipid_s *) opaque; uint8_t ret; + if (len > 9) + cpu_abort(cpu_single_env, "%s: FIXME: bad SPI word width %i\n", + __FUNCTION__, len); + if (s->p >= sizeof(s->resp) / sizeof(*s->resp)) ret = 0; else @@ -486,12 +517,12 @@ static void *mipid_init(void) return s; } -static void n800_spi_setup(struct n800_s *s) +static void n8x0_spi_setup(struct n800_s *s) { - void *tsc2301 = s->ts->opaque; + void *tsc = s->ts.opaque; void *mipid = mipid_init(); - omap_mcspi_attach(s->cpu->mcspi[0], tsc210x_txrx, tsc2301, 0); + omap_mcspi_attach(s->cpu->mcspi[0], s->ts.txrx, tsc, 0); omap_mcspi_attach(s->cpu->mcspi[0], mipid_txrx, mipid, 1); } @@ -540,7 +571,7 @@ static void n800_dss_init(struct rfbi_chip_s *chip) free(fb_blank); } -static void n800_dss_setup(struct n800_s *s, DisplayState *ds) +static void n8x0_dss_setup(struct n800_s *s, DisplayState *ds) { s->blizzard.opaque = s1d13745_init(0, ds); s->blizzard.block = s1d13745_write_block; @@ -550,7 +581,7 @@ static void n800_dss_setup(struct n800_s *s, DisplayState *ds) omap_rfbi_attach(s->cpu->dss, 0, &s->blizzard); } -static void n800_cbus_setup(struct n800_s *s) +static void n8x0_cbus_setup(struct n800_s *s) { qemu_irq dat_out = omap2_gpio_in_get(s->cpu->gpif, N8X0_CBUS_DAT_GPIO)[0]; qemu_irq retu_irq = omap2_gpio_in_get(s->cpu->gpif, N8X0_RETU_GPIO)[0]; @@ -566,17 +597,17 @@ static void n800_cbus_setup(struct n800_s *s) cbus_attach(cbus, s->tahvo = tahvo_init(tahvo_irq, 1)); } -static void n800_usb_power_cb(void *opaque, int line, int level) +static void n8x0_usb_power_cb(void *opaque, int line, int level) { struct n800_s *s = opaque; tusb6010_power(s->usb, level); } -static void n800_usb_setup(struct n800_s *s) +static void n8x0_usb_setup(struct n800_s *s) { qemu_irq tusb_irq = omap2_gpio_in_get(s->cpu->gpif, N8X0_TUSB_INT_GPIO)[0]; - qemu_irq tusb_pwr = qemu_allocate_irqs(n800_usb_power_cb, s, 1)[0]; + qemu_irq tusb_pwr = qemu_allocate_irqs(n8x0_usb_power_cb, s, 1)[0]; struct tusb_s *tusb = tusb6010_init(tusb_irq); /* Using the NOR interface */ @@ -586,7 +617,7 @@ static void n800_usb_setup(struct n800_s *s) tusb6010_sync_io(tusb), 0, 0, tusb); s->usb = tusb; - omap2_gpio_out_set(s->cpu->gpif, N800_TUSB_ENABLE_GPIO, tusb_pwr); + omap2_gpio_out_set(s->cpu->gpif, N8X0_TUSB_ENABLE_GPIO, tusb_pwr); } /* This task is normally performed by the bootloader. If we're loading @@ -603,7 +634,7 @@ static void n800_gpmc_init(struct n800_s *s) } /* Setup sequence done by the bootloader */ -static void n800_boot_init(void *opaque) +static void n8x0_boot_init(void *opaque) { struct n800_s *s = (struct n800_s *) opaque; uint32_t buf; @@ -667,11 +698,79 @@ static void n800_boot_init(void *opaque) #define OMAP_TAG_CBUS 0x4e03 #define OMAP_TAG_EM_ASIC_BB5 0x4e04 -static int n800_atag_setup(struct arm_boot_info *info, void *p) +static struct omap_gpiosw_info_s { + const char *name; + int line; + int type; +} n800_gpiosw_info[] = { + { + "bat_cover", N800_BAT_COVER_GPIO, + OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, + }, { + "cam_act", N800_CAM_ACT_GPIO, + OMAP_GPIOSW_TYPE_ACTIVITY, + }, { + "cam_turn", N800_CAM_TURN_GPIO, + OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED, + }, { + "headphone", N8X0_HEADPHONE_GPIO, + OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED, + }, + { 0 } +}, n810_gpiosw_info[] = { + { + "gps_reset", N810_GPS_RESET_GPIO, + OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT, + }, { + "gps_wakeup", N810_GPS_WAKEUP_GPIO, + OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT, + }, { + "headphone", N8X0_HEADPHONE_GPIO, + OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED, + }, { + "kb_lock", N810_KB_LOCK_GPIO, + OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, + }, { + "sleepx_led", N810_SLEEPX_LED_GPIO, + OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED | OMAP_GPIOSW_OUTPUT, + }, { + "slide", N810_SLIDE_GPIO, + OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED, + }, + { 0 } +}; + +static struct omap_partition_info_s { + uint32_t offset; + uint32_t size; + int mask; + const char *name; +} n800_part_info[] = { + { 0x00000000, 0x00020000, 0x3, "bootloader" }, + { 0x00020000, 0x00060000, 0x0, "config" }, + { 0x00080000, 0x00200000, 0x0, "kernel" }, + { 0x00280000, 0x00200000, 0x3, "initfs" }, + { 0x00480000, 0x0fb80000, 0x3, "rootfs" }, + + { 0, 0, 0, 0 } +}, n810_part_info[] = { + { 0x00000000, 0x00020000, 0x3, "bootloader" }, + { 0x00020000, 0x00060000, 0x0, "config" }, + { 0x00080000, 0x00220000, 0x0, "kernel" }, + { 0x002a0000, 0x00400000, 0x0, "initfs" }, + { 0x006a0000, 0x0f960000, 0x0, "rootfs" }, + + { 0, 0, 0, 0 } +}; + +static int n8x0_atag_setup(void *p, int model) { uint8_t *b; uint16_t *w; uint32_t *l; + struct omap_gpiosw_info_s *gpiosw; + struct omap_partition_info_s *partition; + const char *tag; w = p; @@ -680,10 +779,21 @@ static int n800_atag_setup(struct arm_boot_info *info, void *p) stw_raw(w ++, (1 << 2) | (1 << 1) | (1 << 0)); /* uint enabled_uarts */ w ++; - stw_raw(w ++, OMAP_TAG_EM_ASIC_BB5); /* u16 tag */ +#if 0 + stw_raw(w ++, OMAP_TAG_SERIAL_CONSOLE); /* u16 tag */ stw_raw(w ++, 4); /* u16 len */ - stw_raw(w ++, N8X0_RETU_GPIO); /* s16 retu_irq_gpio */ - stw_raw(w ++, N8X0_TAHVO_GPIO); /* s16 tahvo_irq_gpio */ + stw_raw(w ++, XLDR_LL_UART); /* u8 console_uart */ + stw_raw(w ++, 115200); /* u32 console_speed */ +#endif + + stw_raw(w ++, OMAP_TAG_LCD); /* u16 tag */ + stw_raw(w ++, 36); /* u16 len */ + strcpy((void *) w, "QEMU LCD panel"); /* char panel_name[16] */ + w += 8; + strcpy((void *) w, "blizzard"); /* char ctrl_name[16] */ + w += 8; + stw_raw(w ++, N810_BLIZZARD_RESET_GPIO); /* TODO: n800 s16 nreset_gpio */ + stw_raw(w ++, 24); /* u8 data_lines */ stw_raw(w ++, OMAP_TAG_CBUS); /* u16 tag */ stw_raw(w ++, 8); /* u16 len */ @@ -692,49 +802,30 @@ static int n800_atag_setup(struct arm_boot_info *info, void *p) stw_raw(w ++, N8X0_CBUS_SEL_GPIO); /* s16 sel_gpio */ w ++; - stw_raw(w ++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */ - stw_raw(w ++, 20); /* u16 len */ - strcpy((void *) w, "bat_cover"); /* char name[12] */ - w += 6; - stw_raw(w ++, N800_BAT_COVER_GPIO); /* u16 gpio */ - stw_raw(w ++, 0x01); - stw_raw(w ++, 0); - stw_raw(w ++, 0); - - stw_raw(w ++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */ - stw_raw(w ++, 20); /* u16 len */ - strcpy((void *) w, "cam_act"); /* char name[12] */ - w += 6; - stw_raw(w ++, N800_CAM_ACT_GPIO); /* u16 gpio */ - stw_raw(w ++, 0x20); - stw_raw(w ++, 0); - stw_raw(w ++, 0); - - stw_raw(w ++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */ - stw_raw(w ++, 20); /* u16 len */ - strcpy((void *) w, "cam_turn"); /* char name[12] */ - w += 6; - stw_raw(w ++, N800_CAM_TURN_GPIO); /* u16 gpio */ - stw_raw(w ++, 0x21); - stw_raw(w ++, 0); - stw_raw(w ++, 0); - - stw_raw(w ++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */ - stw_raw(w ++, 20); /* u16 len */ - strcpy((void *) w, "headphone"); /* char name[12] */ - w += 6; - stw_raw(w ++, N800_HEADPHONE_GPIO); /* u16 gpio */ - stw_raw(w ++, 0x11); - stw_raw(w ++, 0); - stw_raw(w ++, 0); + stw_raw(w ++, OMAP_TAG_EM_ASIC_BB5); /* u16 tag */ + stw_raw(w ++, 4); /* u16 len */ + stw_raw(w ++, N8X0_RETU_GPIO); /* s16 retu_irq_gpio */ + stw_raw(w ++, N8X0_TAHVO_GPIO); /* s16 tahvo_irq_gpio */ + + gpiosw = (model == 810) ? n810_gpiosw_info : n800_gpiosw_info; + for (; gpiosw->name; gpiosw ++) { + stw_raw(w ++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */ + stw_raw(w ++, 20); /* u16 len */ + strcpy((void *) w, gpiosw->name); /* char name[12] */ + w += 6; + stw_raw(w ++, gpiosw->line); /* u16 gpio */ + stw_raw(w ++, gpiosw->type); + stw_raw(w ++, 0); + stw_raw(w ++, 0); + } stw_raw(w ++, OMAP_TAG_NOKIA_BT); /* u16 tag */ stw_raw(w ++, 12); /* u16 len */ b = (void *) w; stb_raw(b ++, 0x01); /* u8 chip_type (CSR) */ - stb_raw(b ++, N800_BT_WKUP_GPIO); /* u8 bt_wakeup_gpio */ + stb_raw(b ++, N8X0_BT_WKUP_GPIO); /* u8 bt_wakeup_gpio */ stb_raw(b ++, N8X0_BT_HOST_WKUP_GPIO); /* u8 host_wakeup_gpio */ - stb_raw(b ++, N800_BT_RESET_GPIO); /* u8 reset_gpio */ + stb_raw(b ++, N8X0_BT_RESET_GPIO); /* u8 reset_gpio */ stb_raw(b ++, 1); /* u8 bt_uart */ memset(b, 0, 6); /* u8 bd_addr[6] */ b += 6; @@ -744,70 +835,48 @@ static int n800_atag_setup(struct arm_boot_info *info, void *p) stw_raw(w ++, OMAP_TAG_WLAN_CX3110X); /* u16 tag */ stw_raw(w ++, 8); /* u16 len */ stw_raw(w ++, 0x25); /* u8 chip_type */ - stw_raw(w ++, N800_WLAN_PWR_GPIO); /* s16 power_gpio */ - stw_raw(w ++, N800_WLAN_IRQ_GPIO); /* s16 irq_gpio */ + stw_raw(w ++, N8X0_WLAN_PWR_GPIO); /* s16 power_gpio */ + stw_raw(w ++, N8X0_WLAN_IRQ_GPIO); /* s16 irq_gpio */ stw_raw(w ++, -1); /* s16 spi_cs_gpio */ stw_raw(w ++, OMAP_TAG_MMC); /* u16 tag */ stw_raw(w ++, 16); /* u16 len */ - stw_raw(w ++, 0xf); /* unsigned flags */ - stw_raw(w ++, -1); /* s16 power_pin */ - stw_raw(w ++, -1); /* s16 switch_pin */ - stw_raw(w ++, -1); /* s16 wp_pin */ - stw_raw(w ++, 0); /* unsigned flags */ - stw_raw(w ++, 0); /* s16 power_pin */ - stw_raw(w ++, 0); /* s16 switch_pin */ - stw_raw(w ++, 0); /* s16 wp_pin */ + if (model == 810) { + stw_raw(w ++, 0x23f); /* unsigned flags */ + stw_raw(w ++, -1); /* s16 power_pin */ + stw_raw(w ++, -1); /* s16 switch_pin */ + stw_raw(w ++, -1); /* s16 wp_pin */ + stw_raw(w ++, 0x240); /* unsigned flags */ + stw_raw(w ++, 0xc000); /* s16 power_pin */ + stw_raw(w ++, 0x0248); /* s16 switch_pin */ + stw_raw(w ++, 0xc000); /* s16 wp_pin */ + } else { + stw_raw(w ++, 0xf); /* unsigned flags */ + stw_raw(w ++, -1); /* s16 power_pin */ + stw_raw(w ++, -1); /* s16 switch_pin */ + stw_raw(w ++, -1); /* s16 wp_pin */ + stw_raw(w ++, 0); /* unsigned flags */ + stw_raw(w ++, 0); /* s16 power_pin */ + stw_raw(w ++, 0); /* s16 switch_pin */ + stw_raw(w ++, 0); /* s16 wp_pin */ + } stw_raw(w ++, OMAP_TAG_TEA5761); /* u16 tag */ stw_raw(w ++, 4); /* u16 len */ - stw_raw(w ++, N800_TEA5761_CS_GPIO); /* u16 enable_gpio */ + stw_raw(w ++, N8X0_TEA5761_CS_GPIO); /* u16 enable_gpio */ w ++; - stw_raw(w ++, OMAP_TAG_PARTITION); /* u16 tag */ - stw_raw(w ++, 28); /* u16 len */ - strcpy((void *) w, "bootloader"); /* char name[16] */ - l = (void *) (w + 8); - stl_raw(l ++, 0x00020000); /* unsigned int size */ - stl_raw(l ++, 0x00000000); /* unsigned int offset */ - stl_raw(l ++, 0x3); /* unsigned int mask_flags */ - w = (void *) l; - - stw_raw(w ++, OMAP_TAG_PARTITION); /* u16 tag */ - stw_raw(w ++, 28); /* u16 len */ - strcpy((void *) w, "config"); /* char name[16] */ - l = (void *) (w + 8); - stl_raw(l ++, 0x00060000); /* unsigned int size */ - stl_raw(l ++, 0x00020000); /* unsigned int offset */ - stl_raw(l ++, 0x0); /* unsigned int mask_flags */ - w = (void *) l; - - stw_raw(w ++, OMAP_TAG_PARTITION); /* u16 tag */ - stw_raw(w ++, 28); /* u16 len */ - strcpy((void *) w, "kernel"); /* char name[16] */ - l = (void *) (w + 8); - stl_raw(l ++, 0x00200000); /* unsigned int size */ - stl_raw(l ++, 0x00080000); /* unsigned int offset */ - stl_raw(l ++, 0x0); /* unsigned int mask_flags */ - w = (void *) l; - - stw_raw(w ++, OMAP_TAG_PARTITION); /* u16 tag */ - stw_raw(w ++, 28); /* u16 len */ - strcpy((void *) w, "initfs"); /* char name[16] */ - l = (void *) (w + 8); - stl_raw(l ++, 0x00200000); /* unsigned int size */ - stl_raw(l ++, 0x00280000); /* unsigned int offset */ - stl_raw(l ++, 0x3); /* unsigned int mask_flags */ - w = (void *) l; - - stw_raw(w ++, OMAP_TAG_PARTITION); /* u16 tag */ - stw_raw(w ++, 28); /* u16 len */ - strcpy((void *) w, "rootfs"); /* char name[16] */ - l = (void *) (w + 8); - stl_raw(l ++, 0x0fb80000); /* unsigned int size */ - stl_raw(l ++, 0x00480000); /* unsigned int offset */ - stl_raw(l ++, 0x3); /* unsigned int mask_flags */ - w = (void *) l; + partition = (model == 810) ? n810_part_info : n800_part_info; + for (; partition->name; partition ++) { + stw_raw(w ++, OMAP_TAG_PARTITION); /* u16 tag */ + stw_raw(w ++, 28); /* u16 len */ + strcpy((void *) w, partition->name); /* char name[16] */ + l = (void *) (w + 8); + stl_raw(l ++, partition->size); /* unsigned int size */ + stl_raw(l ++, partition->offset); /* unsigned int offset */ + stl_raw(l ++, partition->mask); /* unsigned int mask_flags */ + w = (void *) l; + } stw_raw(w ++, OMAP_TAG_BOOT_REASON); /* u16 tag */ stw_raw(w ++, 12); /* u16 len */ @@ -827,77 +896,49 @@ static int n800_atag_setup(struct arm_boot_info *info, void *p) #endif w += 6; -#if 0 /* N810 */ - stw_raw(w ++, OMAP_TAG_VERSION_STR); /* u16 tag */ - stw_raw(w ++, 24); /* u16 len */ - strcpy((void *) w, "product"); /* char component[12] */ - w += 6; - strcpy((void *) w, "RX-44"); /* char version[12] */ - w += 6; - - stw_raw(w ++, OMAP_TAG_VERSION_STR); /* u16 tag */ - stw_raw(w ++, 24); /* u16 len */ - strcpy((void *) w, "hw-build"); /* char component[12] */ - w += 6; - strcpy((void *) w, "QEMU"); /* char version[12] */ - w += 6; - - stw_raw(w ++, OMAP_TAG_VERSION_STR); /* u16 tag */ - stw_raw(w ++, 24); /* u16 len */ - strcpy((void *) w, "nolo"); /* char component[12] */ - w += 6; - strcpy((void *) w, "1.1.10-qemu"); /* char version[12] */ - w += 6; -#else + tag = (model == 810) ? "RX-44" : "RX-34"; stw_raw(w ++, OMAP_TAG_VERSION_STR); /* u16 tag */ stw_raw(w ++, 24); /* u16 len */ strcpy((void *) w, "product"); /* char component[12] */ w += 6; - strcpy((void *) w, "RX-34"); /* char version[12] */ + strcpy((void *) w, tag); /* char version[12] */ w += 6; stw_raw(w ++, OMAP_TAG_VERSION_STR); /* u16 tag */ stw_raw(w ++, 24); /* u16 len */ strcpy((void *) w, "hw-build"); /* char component[12] */ w += 6; - strcpy((void *) w, "QEMU"); /* char version[12] */ + strcpy((void *) w, "QEMU " QEMU_VERSION); /* char version[12] */ w += 6; + tag = (model == 810) ? "1.1.10-qemu" : "1.1.6-qemu"; stw_raw(w ++, OMAP_TAG_VERSION_STR); /* u16 tag */ stw_raw(w ++, 24); /* u16 len */ strcpy((void *) w, "nolo"); /* char component[12] */ w += 6; - strcpy((void *) w, "1.1.6-qemu"); /* char version[12] */ + strcpy((void *) w, tag); /* char version[12] */ w += 6; -#endif - - stw_raw(w ++, OMAP_TAG_LCD); /* u16 tag */ - stw_raw(w ++, 36); /* u16 len */ - strcpy((void *) w, "QEMU LCD panel"); /* char panel_name[16] */ - w += 8; - strcpy((void *) w, "blizzard"); /* char ctrl_name[16] */ - w += 8; - stw_raw(w ++, 5); /* TODO s16 nreset_gpio */ - stw_raw(w ++, 16); /* u8 data_lines */ return (void *) w - p; } -static struct arm_boot_info n800_binfo = { - .loader_start = OMAP2_Q2_BASE, - /* Actually two chips of 0x4000000 bytes each */ - .ram_size = 0x08000000, - .board_id = 0x4f7, - .atag_board = n800_atag_setup, -}; +static int n800_atag_setup(struct arm_boot_info *info, void *p) +{ + return n8x0_atag_setup(p, 800); +} -static void n800_init(ram_addr_t ram_size, int vga_ram_size, - const char *boot_device, DisplayState *ds, - const char *kernel_filename, const char *kernel_cmdline, - const char *initrd_filename, const char *cpu_model) +static int n810_atag_setup(struct arm_boot_info *info, void *p) +{ + return n8x0_atag_setup(p, 810); +} + +static void n8x0_init(ram_addr_t ram_size, const char *boot_device, + DisplayState *ds, const char *kernel_filename, + const char *kernel_cmdline, const char *initrd_filename, + const char *cpu_model, struct arm_boot_info *binfo, int model) { struct n800_s *s = (struct n800_s *) qemu_mallocz(sizeof(*s)); - int sdram_size = n800_binfo.ram_size; + int sdram_size = binfo->ram_size; int onenandram_size = 0x00010000; if (ram_size < sdram_size + onenandram_size + OMAP242X_SRAM_SIZE) { @@ -908,15 +949,18 @@ static void n800_init(ram_addr_t ram_size, int vga_ram_size, s->cpu = omap2420_mpu_init(sdram_size, NULL, cpu_model); - n800_gpio_setup(s); + n8x0_gpio_setup(s); n8x0_nand_setup(s); - n800_i2c_setup(s); - n800_tsc_setup(s); - n800_spi_setup(s); - n800_dss_setup(s, ds); - n800_cbus_setup(s); + n8x0_i2c_setup(s); + if (model == 800) + n800_tsc_kbd_setup(s); + else if (model == 810) + n810_tsc_setup(s); + n8x0_spi_setup(s); + n8x0_dss_setup(s, ds); + n8x0_cbus_setup(s); if (usb_enabled) - n800_usb_setup(s); + n8x0_usb_setup(s); /* Setup initial (reset) machine state */ @@ -925,21 +969,66 @@ static void n800_init(ram_addr_t ram_size, int vga_ram_size, if (kernel_filename) { /* Or at the linux loader. */ - n800_binfo.kernel_filename = kernel_filename; - n800_binfo.kernel_cmdline = kernel_cmdline; - n800_binfo.initrd_filename = initrd_filename; - arm_load_kernel(s->cpu->env, &n800_binfo); + binfo->kernel_filename = kernel_filename; + binfo->kernel_cmdline = kernel_cmdline; + binfo->initrd_filename = initrd_filename; + arm_load_kernel(s->cpu->env, binfo); - qemu_register_reset(n800_boot_init, s); - n800_boot_init(s); + qemu_register_reset(n8x0_boot_init, s); + n8x0_boot_init(s); } dpy_resize(ds, 800, 480); } +static struct arm_boot_info n800_binfo = { + .loader_start = OMAP2_Q2_BASE, + /* Actually two chips of 0x4000000 bytes each */ + .ram_size = 0x08000000, + .board_id = 0x4f7, + .atag_board = n800_atag_setup, +}; + +static struct arm_boot_info n810_binfo = { + .loader_start = OMAP2_Q2_BASE, + /* Actually two chips of 0x4000000 bytes each */ + .ram_size = 0x08000000, + /* 0x60c and 0x6bf (WiMAX Edition) have been assigned but are not + * used by some older versions of the bootloader and 5555 is used + * instead (including versions that shipped with many devices). */ + .board_id = 0x60c, + .atag_board = n810_atag_setup, +}; + +static void n800_init(ram_addr_t ram_size, int vga_ram_size, + const char *boot_device, DisplayState *ds, + const char *kernel_filename, const char *kernel_cmdline, + const char *initrd_filename, const char *cpu_model) +{ + return n8x0_init(ram_size, boot_device, ds, + kernel_filename, kernel_cmdline, initrd_filename, + cpu_model, &n800_binfo, 800); +} + +static void n810_init(ram_addr_t ram_size, int vga_ram_size, + const char *boot_device, DisplayState *ds, + const char *kernel_filename, const char *kernel_cmdline, + const char *initrd_filename, const char *cpu_model) +{ + return n8x0_init(ram_size, boot_device, ds, + kernel_filename, kernel_cmdline, initrd_filename, + cpu_model, &n810_binfo, 810); +} + QEMUMachine n800_machine = { "n800", - "Nokia N800 aka. RX-34 tablet (OMAP2420)", + "Nokia N800 tablet aka. RX-34 (OMAP2420)", n800_init, (0x08000000 + 0x00010000 + OMAP242X_SRAM_SIZE) | RAMSIZE_FIXED, }; + +QEMUMachine n810_machine = { + "n810", + "Nokia N810 tablet aka. RX-44 (OMAP2420)", + n810_init, +}; @@ -695,7 +695,7 @@ struct omap_mcspi_s; struct omap_mcspi_s *omap_mcspi_init(struct omap_target_agent_s *ta, int chnum, qemu_irq irq, qemu_irq *drq, omap_clk fclk, omap_clk iclk); void omap_mcspi_attach(struct omap_mcspi_s *s, - uint32_t (*txrx)(void *opaque, uint32_t), void *opaque, + uint32_t (*txrx)(void *opaque, uint32_t, int), void *opaque, int chipselect); struct omap_rtc_s; @@ -1012,6 +1012,15 @@ void omap_mpu_wakeup(void *opaque, int irq, int req); #define OMAP_TAG_FLASH_PART_STR 0x4f81 #define OMAP_TAG_VERSION_STR 0x4f82 +enum { + OMAP_GPIOSW_TYPE_COVER = 0 << 4, + OMAP_GPIOSW_TYPE_CONNECTION = 1 << 4, + OMAP_GPIOSW_TYPE_ACTIVITY = 2 << 4, +}; + +#define OMAP_GPIOSW_INVERTED 0x0001 +#define OMAP_GPIOSW_OUTPUT 0x0002 + # define TCMI_VERBOSE 1 //# define MEM_VERBOSE 1 diff --git a/hw/omap2.c b/hw/omap2.c index 32c8cc7319..8ace422632 100644 --- a/hw/omap2.c +++ b/hw/omap2.c @@ -1109,7 +1109,7 @@ struct omap_mcspi_s { struct omap_mcspi_ch_s { qemu_irq txdrq; qemu_irq rxdrq; - uint32_t (*txrx)(void *opaque, uint32_t); + uint32_t (*txrx)(void *opaque, uint32_t, int); void *opaque; uint32_t tx; @@ -1157,7 +1157,8 @@ static void omap_mcspi_transfer_run(struct omap_mcspi_s *s, int chnum) if (!(s->control & 1) || /* SINGLE */ (ch->config & (1 << 20))) { /* FORCE */ if (ch->txrx) - ch->rx = ch->txrx(ch->opaque, ch->tx); + ch->rx = ch->txrx(ch->opaque, ch->tx, /* WL */ + 1 + (0x1f & (ch->config >> 7))); } ch->tx = 0; @@ -1408,7 +1409,7 @@ struct omap_mcspi_s *omap_mcspi_init(struct omap_target_agent_s *ta, int chnum, } void omap_mcspi_attach(struct omap_mcspi_s *s, - uint32_t (*txrx)(void *opaque, uint32_t), void *opaque, + uint32_t (*txrx)(void *opaque, uint32_t, int), void *opaque, int chipselect) { if (chipselect < 0 || chipselect >= s->chnum) @@ -1476,7 +1477,8 @@ static uint32_t omap_sti_read(void *opaque, target_phys_addr_t addr) case 0x24: /* STI_ER / STI_DR / XTI_TRACESELECT */ case 0x28: /* STI_RX_DR / XTI_RXDATA */ - break; + /* TODO */ + return 0; case 0x2c: /* STI_CLK_CTRL / XTI_SCLKCRTL */ return s->clkcontrol; @@ -1527,6 +1529,9 @@ static void omap_sti_write(void *opaque, target_phys_addr_t addr, case 0x24: /* STI_ER / STI_DR / XTI_TRACESELECT */ case 0x28: /* STI_RX_DR / XTI_RXDATA */ + /* TODO */ + return; + default: OMAP_BAD_REG(addr); return; diff --git a/hw/tsc210x.c b/hw/tsc210x.c index da2efeda89..e512087238 100644 --- a/hw/tsc210x.c +++ b/hw/tsc210x.c @@ -939,11 +939,15 @@ static void tsc210x_write(struct tsc210x_state_s *s, uint16_t value) } } -uint32_t tsc210x_txrx(void *opaque, uint32_t value) +uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len) { struct tsc210x_state_s *s = opaque; uint32_t ret = 0; + if (len != 16) + cpu_abort(cpu_single_env, "%s: FIXME: bad SPI word width %i\n", + __FUNCTION__, len); + /* TODO: sequential reads etc - how do we make sure the host doesn't * unintentionally read out a conversion result from a register while * transmitting the command word of the next command? */ @@ -1124,12 +1128,12 @@ struct uwire_slave_s *tsc2102_init(qemu_irq pint, AudioState *audio) s->tr[0] = 0; s->tr[1] = 1; - s->tr[2] = 0; - s->tr[3] = 1; + s->tr[2] = 1; + s->tr[3] = 0; s->tr[4] = 1; s->tr[5] = 0; - s->tr[6] = 0; - s->tr[7] = 1; + s->tr[6] = 1; + s->tr[7] = 0; s->chip.opaque = s; s->chip.send = (void *) tsc210x_write; @@ -1178,12 +1182,12 @@ struct uwire_slave_s *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, s->tr[0] = 0; s->tr[1] = 1; - s->tr[2] = 0; - s->tr[3] = 1; + s->tr[2] = 1; + s->tr[3] = 0; s->tr[4] = 1; s->tr[5] = 0; - s->tr[6] = 0; - s->tr[7] = 1; + s->tr[6] = 1; + s->tr[7] = 0; s->chip.opaque = s; s->chip.send = (void *) tsc210x_write; |