diff options
Diffstat (limited to 'hw/vfio/pci.c')
| -rw-r--r-- | hw/vfio/pci.c | 158 |
1 files changed, 1 insertions, 157 deletions
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c index 6a0ec453b3..c60a6a7641 100644 --- a/hw/vfio/pci.c +++ b/hw/vfio/pci.c @@ -2315,162 +2315,6 @@ static void vfio_unregister_req_notifier(VFIOPCIDevice *vdev) vdev->req_enabled = false; } -/* - * AMD Radeon PCI config reset, based on Linux: - * drivers/gpu/drm/radeon/ci_smc.c:ci_is_smc_running() - * drivers/gpu/drm/radeon/radeon_device.c:radeon_pci_config_reset - * drivers/gpu/drm/radeon/ci_smc.c:ci_reset_smc() - * drivers/gpu/drm/radeon/ci_smc.c:ci_stop_smc_clock() - * IDs: include/drm/drm_pciids.h - * Registers: http://cgit.freedesktop.org/~agd5f/linux/commit/?id=4e2aa447f6f0 - * - * Bonaire and Hawaii GPUs do not respond to a bus reset. This is a bug in the - * hardware that should be fixed on future ASICs. The symptom of this is that - * once the accerlated driver loads, Windows guests will bsod on subsequent - * attmpts to load the driver, such as after VM reset or shutdown/restart. To - * work around this, we do an AMD specific PCI config reset, followed by an SMC - * reset. The PCI config reset only works if SMC firmware is running, so we - * have a dependency on the state of the device as to whether this reset will - * be effective. There are still cases where we won't be able to kick the - * device into working, but this greatly improves the usability overall. The - * config reset magic is relatively common on AMD GPUs, but the setup and SMC - * poking is largely ASIC specific. - */ -static bool vfio_radeon_smc_is_running(VFIOPCIDevice *vdev) -{ - uint32_t clk, pc_c; - - /* - * Registers 200h and 204h are index and data registers for accessing - * indirect configuration registers within the device. - */ - vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000004, 4); - clk = vfio_region_read(&vdev->bars[5].region, 0x204, 4); - vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000370, 4); - pc_c = vfio_region_read(&vdev->bars[5].region, 0x204, 4); - - return (!(clk & 1) && (0x20100 <= pc_c)); -} - -/* - * The scope of a config reset is controlled by a mode bit in the misc register - * and a fuse, exposed as a bit in another register. The fuse is the default - * (0 = GFX, 1 = whole GPU), the misc bit is a toggle, with the forumula - * scope = !(misc ^ fuse), where the resulting scope is defined the same as - * the fuse. A truth table therefore tells us that if misc == fuse, we need - * to flip the value of the bit in the misc register. - */ -static void vfio_radeon_set_gfx_only_reset(VFIOPCIDevice *vdev) -{ - uint32_t misc, fuse; - bool a, b; - - vfio_region_write(&vdev->bars[5].region, 0x200, 0xc00c0000, 4); - fuse = vfio_region_read(&vdev->bars[5].region, 0x204, 4); - b = fuse & 64; - - vfio_region_write(&vdev->bars[5].region, 0x200, 0xc0000010, 4); - misc = vfio_region_read(&vdev->bars[5].region, 0x204, 4); - a = misc & 2; - - if (a == b) { - vfio_region_write(&vdev->bars[5].region, 0x204, misc ^ 2, 4); - vfio_region_read(&vdev->bars[5].region, 0x204, 4); /* flush */ - } -} - -static int vfio_radeon_reset(VFIOPCIDevice *vdev) -{ - PCIDevice *pdev = &vdev->pdev; - int i, ret = 0; - uint32_t data; - - /* Defer to a kernel implemented reset */ - if (vdev->vbasedev.reset_works) { - return -ENODEV; - } - - /* Enable only memory BAR access */ - vfio_pci_write_config(pdev, PCI_COMMAND, PCI_COMMAND_MEMORY, 2); - - /* Reset only works if SMC firmware is loaded and running */ - if (!vfio_radeon_smc_is_running(vdev)) { - ret = -EINVAL; - goto out; - } - - /* Make sure only the GFX function is reset */ - vfio_radeon_set_gfx_only_reset(vdev); - - /* AMD PCI config reset */ - vfio_pci_write_config(pdev, 0x7c, 0x39d5e86b, 4); - usleep(100); - - /* Read back the memory size to make sure we're out of reset */ - for (i = 0; i < 100000; i++) { - if (vfio_region_read(&vdev->bars[5].region, 0x5428, 4) != 0xffffffff) { - break; - } - usleep(1); - } - - /* Reset SMC */ - vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000000, 4); - data = vfio_region_read(&vdev->bars[5].region, 0x204, 4); - data |= 1; - vfio_region_write(&vdev->bars[5].region, 0x204, data, 4); - - /* Disable SMC clock */ - vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000004, 4); - data = vfio_region_read(&vdev->bars[5].region, 0x204, 4); - data |= 1; - vfio_region_write(&vdev->bars[5].region, 0x204, data, 4); - -out: - /* Restore PCI command register */ - vfio_pci_write_config(pdev, PCI_COMMAND, 0, 2); - - return ret; -} - -static void vfio_setup_resetfn(VFIOPCIDevice *vdev) -{ - PCIDevice *pdev = &vdev->pdev; - uint16_t vendor, device; - - vendor = pci_get_word(pdev->config + PCI_VENDOR_ID); - device = pci_get_word(pdev->config + PCI_DEVICE_ID); - - switch (vendor) { - case 0x1002: - switch (device) { - /* Bonaire */ - case 0x6649: /* Bonaire [FirePro W5100] */ - case 0x6650: - case 0x6651: - case 0x6658: /* Bonaire XTX [Radeon R7 260X] */ - case 0x665c: /* Bonaire XT [Radeon HD 7790/8770 / R9 260 OEM] */ - case 0x665d: /* Bonaire [Radeon R7 200 Series] */ - /* Hawaii */ - case 0x67A0: /* Hawaii XT GL [FirePro W9100] */ - case 0x67A1: /* Hawaii PRO GL [FirePro W8100] */ - case 0x67A2: - case 0x67A8: - case 0x67A9: - case 0x67AA: - case 0x67B0: /* Hawaii XT [Radeon R9 290X] */ - case 0x67B1: /* Hawaii PRO [Radeon R9 290] */ - case 0x67B8: - case 0x67B9: - case 0x67BA: - case 0x67BE: - vdev->resetfn = vfio_radeon_reset; - break; - } - break; - } -} - static int vfio_initfn(PCIDevice *pdev) { VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev); @@ -2619,7 +2463,7 @@ static int vfio_initfn(PCIDevice *pdev) vfio_register_err_notifier(vdev); vfio_register_req_notifier(vdev); - vfio_setup_resetfn(vdev); + vfio_setup_resetfn_quirk(vdev); return 0; |