diff options
Diffstat (limited to 'hw/usb/hcd-ohci.c')
| -rw-r--r-- | hw/usb/hcd-ohci.c | 1898 |
1 files changed, 1898 insertions, 0 deletions
diff --git a/hw/usb/hcd-ohci.c b/hw/usb/hcd-ohci.c new file mode 100644 index 0000000000..dd79cef81f --- /dev/null +++ b/hw/usb/hcd-ohci.c @@ -0,0 +1,1898 @@ +/* + * QEMU USB OHCI Emulation + * Copyright (c) 2004 Gianni Tedesco + * Copyright (c) 2006 CodeSourcery + * Copyright (c) 2006 Openedhand Ltd. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + * + * TODO: + * o Isochronous transfers + * o Allocate bandwidth in frames properly + * o Disable timers when nothing needs to be done, or remove timer usage + * all together. + * o Handle unrecoverable errors properly + * o BIOS work to boot from USB storage +*/ + +#include "hw/hw.h" +#include "qemu-timer.h" +#include "hw/usb.h" +#include "hw/pci.h" +#include "hw/usb-ohci.h" +#include "hw/sysbus.h" +#include "hw/qdev-addr.h" + +//#define DEBUG_OHCI +/* Dump packet contents. */ +//#define DEBUG_PACKET +//#define DEBUG_ISOCH +/* This causes frames to occur 1000x slower */ +//#define OHCI_TIME_WARP 1 + +#ifdef DEBUG_OHCI +#define DPRINTF printf +#else +#define DPRINTF(...) +#endif + +/* Number of Downstream Ports on the root hub. */ + +#define OHCI_MAX_PORTS 15 + +static int64_t usb_frame_time; +static int64_t usb_bit_time; + +typedef struct OHCIPort { + USBPort port; + uint32_t ctrl; +} OHCIPort; + +typedef struct { + USBBus bus; + qemu_irq irq; + MemoryRegion mem; + int num_ports; + const char *name; + + QEMUTimer *eof_timer; + int64_t sof_time; + + /* OHCI state */ + /* Control partition */ + uint32_t ctl, status; + uint32_t intr_status; + uint32_t intr; + + /* memory pointer partition */ + uint32_t hcca; + uint32_t ctrl_head, ctrl_cur; + uint32_t bulk_head, bulk_cur; + uint32_t per_cur; + uint32_t done; + int done_count; + + /* Frame counter partition */ + uint32_t fsmps:15; + uint32_t fit:1; + uint32_t fi:14; + uint32_t frt:1; + uint16_t frame_number; + uint16_t padding; + uint32_t pstart; + uint32_t lst; + + /* Root Hub partition */ + uint32_t rhdesc_a, rhdesc_b; + uint32_t rhstatus; + OHCIPort rhport[OHCI_MAX_PORTS]; + + /* PXA27x Non-OHCI events */ + uint32_t hstatus; + uint32_t hmask; + uint32_t hreset; + uint32_t htest; + + /* SM501 local memory offset */ + target_phys_addr_t localmem_base; + + /* Active packets. */ + uint32_t old_ctl; + USBPacket usb_packet; + uint8_t usb_buf[8192]; + uint32_t async_td; + int async_complete; + +} OHCIState; + +/* Host Controller Communications Area */ +struct ohci_hcca { + uint32_t intr[32]; + uint16_t frame, pad; + uint32_t done; +}; + +static void ohci_bus_stop(OHCIState *ohci); +static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev); + +/* Bitfields for the first word of an Endpoint Desciptor. */ +#define OHCI_ED_FA_SHIFT 0 +#define OHCI_ED_FA_MASK (0x7f<<OHCI_ED_FA_SHIFT) +#define OHCI_ED_EN_SHIFT 7 +#define OHCI_ED_EN_MASK (0xf<<OHCI_ED_EN_SHIFT) +#define OHCI_ED_D_SHIFT 11 +#define OHCI_ED_D_MASK (3<<OHCI_ED_D_SHIFT) +#define OHCI_ED_S (1<<13) +#define OHCI_ED_K (1<<14) +#define OHCI_ED_F (1<<15) +#define OHCI_ED_MPS_SHIFT 16 +#define OHCI_ED_MPS_MASK (0x7ff<<OHCI_ED_MPS_SHIFT) + +/* Flags in the head field of an Endpoint Desciptor. */ +#define OHCI_ED_H 1 +#define OHCI_ED_C 2 + +/* Bitfields for the first word of a Transfer Desciptor. */ +#define OHCI_TD_R (1<<18) +#define OHCI_TD_DP_SHIFT 19 +#define OHCI_TD_DP_MASK (3<<OHCI_TD_DP_SHIFT) +#define OHCI_TD_DI_SHIFT 21 +#define OHCI_TD_DI_MASK (7<<OHCI_TD_DI_SHIFT) +#define OHCI_TD_T0 (1<<24) +#define OHCI_TD_T1 (1<<25) +#define OHCI_TD_EC_SHIFT 26 +#define OHCI_TD_EC_MASK (3<<OHCI_TD_EC_SHIFT) +#define OHCI_TD_CC_SHIFT 28 +#define OHCI_TD_CC_MASK (0xf<<OHCI_TD_CC_SHIFT) + +/* Bitfields for the first word of an Isochronous Transfer Desciptor. */ +/* CC & DI - same as in the General Transfer Desciptor */ +#define OHCI_TD_SF_SHIFT 0 +#define OHCI_TD_SF_MASK (0xffff<<OHCI_TD_SF_SHIFT) +#define OHCI_TD_FC_SHIFT 24 +#define OHCI_TD_FC_MASK (7<<OHCI_TD_FC_SHIFT) + +/* Isochronous Transfer Desciptor - Offset / PacketStatusWord */ +#define OHCI_TD_PSW_CC_SHIFT 12 +#define OHCI_TD_PSW_CC_MASK (0xf<<OHCI_TD_PSW_CC_SHIFT) +#define OHCI_TD_PSW_SIZE_SHIFT 0 +#define OHCI_TD_PSW_SIZE_MASK (0xfff<<OHCI_TD_PSW_SIZE_SHIFT) + +#define OHCI_PAGE_MASK 0xfffff000 +#define OHCI_OFFSET_MASK 0xfff + +#define OHCI_DPTR_MASK 0xfffffff0 + +#define OHCI_BM(val, field) \ + (((val) & OHCI_##field##_MASK) >> OHCI_##field##_SHIFT) + +#define OHCI_SET_BM(val, field, newval) do { \ + val &= ~OHCI_##field##_MASK; \ + val |= ((newval) << OHCI_##field##_SHIFT) & OHCI_##field##_MASK; \ + } while(0) + +/* endpoint descriptor */ +struct ohci_ed { + uint32_t flags; + uint32_t tail; + uint32_t head; + uint32_t next; +}; + +/* General transfer descriptor */ +struct ohci_td { + uint32_t flags; + uint32_t cbp; + uint32_t next; + uint32_t be; +}; + +/* Isochronous transfer descriptor */ +struct ohci_iso_td { + uint32_t flags; + uint32_t bp; + uint32_t next; + uint32_t be; + uint16_t offset[8]; +}; + +#define USB_HZ 12000000 + +/* OHCI Local stuff */ +#define OHCI_CTL_CBSR ((1<<0)|(1<<1)) +#define OHCI_CTL_PLE (1<<2) +#define OHCI_CTL_IE (1<<3) +#define OHCI_CTL_CLE (1<<4) +#define OHCI_CTL_BLE (1<<5) +#define OHCI_CTL_HCFS ((1<<6)|(1<<7)) +#define OHCI_USB_RESET 0x00 +#define OHCI_USB_RESUME 0x40 +#define OHCI_USB_OPERATIONAL 0x80 +#define OHCI_USB_SUSPEND 0xc0 +#define OHCI_CTL_IR (1<<8) +#define OHCI_CTL_RWC (1<<9) +#define OHCI_CTL_RWE (1<<10) + +#define OHCI_STATUS_HCR (1<<0) +#define OHCI_STATUS_CLF (1<<1) +#define OHCI_STATUS_BLF (1<<2) +#define OHCI_STATUS_OCR (1<<3) +#define OHCI_STATUS_SOC ((1<<6)|(1<<7)) + +#define OHCI_INTR_SO (1<<0) /* Scheduling overrun */ +#define OHCI_INTR_WD (1<<1) /* HcDoneHead writeback */ +#define OHCI_INTR_SF (1<<2) /* Start of frame */ +#define OHCI_INTR_RD (1<<3) /* Resume detect */ +#define OHCI_INTR_UE (1<<4) /* Unrecoverable error */ +#define OHCI_INTR_FNO (1<<5) /* Frame number overflow */ +#define OHCI_INTR_RHSC (1<<6) /* Root hub status change */ +#define OHCI_INTR_OC (1<<30) /* Ownership change */ +#define OHCI_INTR_MIE (1<<31) /* Master Interrupt Enable */ + +#define OHCI_HCCA_SIZE 0x100 +#define OHCI_HCCA_MASK 0xffffff00 + +#define OHCI_EDPTR_MASK 0xfffffff0 + +#define OHCI_FMI_FI 0x00003fff +#define OHCI_FMI_FSMPS 0xffff0000 +#define OHCI_FMI_FIT 0x80000000 + +#define OHCI_FR_RT (1<<31) + +#define OHCI_LS_THRESH 0x628 + +#define OHCI_RHA_RW_MASK 0x00000000 /* Mask of supported features. */ +#define OHCI_RHA_PSM (1<<8) +#define OHCI_RHA_NPS (1<<9) +#define OHCI_RHA_DT (1<<10) +#define OHCI_RHA_OCPM (1<<11) +#define OHCI_RHA_NOCP (1<<12) +#define OHCI_RHA_POTPGT_MASK 0xff000000 + +#define OHCI_RHS_LPS (1<<0) +#define OHCI_RHS_OCI (1<<1) +#define OHCI_RHS_DRWE (1<<15) +#define OHCI_RHS_LPSC (1<<16) +#define OHCI_RHS_OCIC (1<<17) +#define OHCI_RHS_CRWE (1<<31) + +#define OHCI_PORT_CCS (1<<0) +#define OHCI_PORT_PES (1<<1) +#define OHCI_PORT_PSS (1<<2) +#define OHCI_PORT_POCI (1<<3) +#define OHCI_PORT_PRS (1<<4) +#define OHCI_PORT_PPS (1<<8) +#define OHCI_PORT_LSDA (1<<9) +#define OHCI_PORT_CSC (1<<16) +#define OHCI_PORT_PESC (1<<17) +#define OHCI_PORT_PSSC (1<<18) +#define OHCI_PORT_OCIC (1<<19) +#define OHCI_PORT_PRSC (1<<20) +#define OHCI_PORT_WTC (OHCI_PORT_CSC|OHCI_PORT_PESC|OHCI_PORT_PSSC \ + |OHCI_PORT_OCIC|OHCI_PORT_PRSC) + +#define OHCI_TD_DIR_SETUP 0x0 +#define OHCI_TD_DIR_OUT 0x1 +#define OHCI_TD_DIR_IN 0x2 +#define OHCI_TD_DIR_RESERVED 0x3 + +#define OHCI_CC_NOERROR 0x0 +#define OHCI_CC_CRC 0x1 +#define OHCI_CC_BITSTUFFING 0x2 +#define OHCI_CC_DATATOGGLEMISMATCH 0x3 +#define OHCI_CC_STALL 0x4 +#define OHCI_CC_DEVICENOTRESPONDING 0x5 +#define OHCI_CC_PIDCHECKFAILURE 0x6 +#define OHCI_CC_UNDEXPETEDPID 0x7 +#define OHCI_CC_DATAOVERRUN 0x8 +#define OHCI_CC_DATAUNDERRUN 0x9 +#define OHCI_CC_BUFFEROVERRUN 0xc +#define OHCI_CC_BUFFERUNDERRUN 0xd + +#define OHCI_HRESET_FSBIR (1 << 0) + +/* Update IRQ levels */ +static inline void ohci_intr_update(OHCIState *ohci) +{ + int level = 0; + + if ((ohci->intr & OHCI_INTR_MIE) && + (ohci->intr_status & ohci->intr)) + level = 1; + + qemu_set_irq(ohci->irq, level); +} + +/* Set an interrupt */ +static inline void ohci_set_interrupt(OHCIState *ohci, uint32_t intr) +{ + ohci->intr_status |= intr; + ohci_intr_update(ohci); +} + +/* Attach or detach a device on a root hub port. */ +static void ohci_attach(USBPort *port1) +{ + OHCIState *s = port1->opaque; + OHCIPort *port = &s->rhport[port1->index]; + uint32_t old_state = port->ctrl; + + /* set connect status */ + port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC; + + /* update speed */ + if (port->port.dev->speed == USB_SPEED_LOW) { + port->ctrl |= OHCI_PORT_LSDA; + } else { + port->ctrl &= ~OHCI_PORT_LSDA; + } + + /* notify of remote-wakeup */ + if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) { + ohci_set_interrupt(s, OHCI_INTR_RD); + } + + DPRINTF("usb-ohci: Attached port %d\n", port1->index); + + if (old_state != port->ctrl) { + ohci_set_interrupt(s, OHCI_INTR_RHSC); + } +} + +static void ohci_detach(USBPort *port1) +{ + OHCIState *s = port1->opaque; + OHCIPort *port = &s->rhport[port1->index]; + uint32_t old_state = port->ctrl; + + ohci_async_cancel_device(s, port1->dev); + + /* set connect status */ + if (port->ctrl & OHCI_PORT_CCS) { + port->ctrl &= ~OHCI_PORT_CCS; + port->ctrl |= OHCI_PORT_CSC; + } + /* disable port */ + if (port->ctrl & OHCI_PORT_PES) { + port->ctrl &= ~OHCI_PORT_PES; + port->ctrl |= OHCI_PORT_PESC; + } + DPRINTF("usb-ohci: Detached port %d\n", port1->index); + + if (old_state != port->ctrl) { + ohci_set_interrupt(s, OHCI_INTR_RHSC); + } +} + +static void ohci_wakeup(USBPort *port1) +{ + OHCIState *s = port1->opaque; + OHCIPort *port = &s->rhport[port1->index]; + uint32_t intr = 0; + if (port->ctrl & OHCI_PORT_PSS) { + DPRINTF("usb-ohci: port %d: wakeup\n", port1->index); + port->ctrl |= OHCI_PORT_PSSC; + port->ctrl &= ~OHCI_PORT_PSS; + intr = OHCI_INTR_RHSC; + } + /* Note that the controller can be suspended even if this port is not */ + if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) { + DPRINTF("usb-ohci: remote-wakeup: SUSPEND->RESUME\n"); + /* This is the one state transition the controller can do by itself */ + s->ctl &= ~OHCI_CTL_HCFS; + s->ctl |= OHCI_USB_RESUME; + /* In suspend mode only ResumeDetected is possible, not RHSC: + * see the OHCI spec 5.1.2.3. + */ + intr = OHCI_INTR_RD; + } + ohci_set_interrupt(s, intr); +} + +static void ohci_child_detach(USBPort *port1, USBDevice *child) +{ + OHCIState *s = port1->opaque; + + ohci_async_cancel_device(s, child); +} + +static USBDevice *ohci_find_device(OHCIState *ohci, uint8_t addr) +{ + USBDevice *dev; + int i; + + for (i = 0; i < ohci->num_ports; i++) { + if ((ohci->rhport[i].ctrl & OHCI_PORT_PES) == 0) { + continue; + } + dev = usb_find_device(&ohci->rhport[i].port, addr); + if (dev != NULL) { + return dev; + } + } + return NULL; +} + +/* Reset the controller */ +static void ohci_reset(void *opaque) +{ + OHCIState *ohci = opaque; + OHCIPort *port; + int i; + + ohci_bus_stop(ohci); + ohci->ctl = 0; + ohci->old_ctl = 0; + ohci->status = 0; + ohci->intr_status = 0; + ohci->intr = OHCI_INTR_MIE; + + ohci->hcca = 0; + ohci->ctrl_head = ohci->ctrl_cur = 0; + ohci->bulk_head = ohci->bulk_cur = 0; + ohci->per_cur = 0; + ohci->done = 0; + ohci->done_count = 7; + + /* FSMPS is marked TBD in OCHI 1.0, what gives ffs? + * I took the value linux sets ... + */ + ohci->fsmps = 0x2778; + ohci->fi = 0x2edf; + ohci->fit = 0; + ohci->frt = 0; + ohci->frame_number = 0; + ohci->pstart = 0; + ohci->lst = OHCI_LS_THRESH; + + ohci->rhdesc_a = OHCI_RHA_NPS | ohci->num_ports; + ohci->rhdesc_b = 0x0; /* Impl. specific */ + ohci->rhstatus = 0; + + for (i = 0; i < ohci->num_ports; i++) + { + port = &ohci->rhport[i]; + port->ctrl = 0; + if (port->port.dev && port->port.dev->attached) { + usb_port_reset(&port->port); + } + } + if (ohci->async_td) { + usb_cancel_packet(&ohci->usb_packet); + ohci->async_td = 0; + } + DPRINTF("usb-ohci: Reset %s\n", ohci->name); +} + +/* Get an array of dwords from main memory */ +static inline int get_dwords(OHCIState *ohci, + uint32_t addr, uint32_t *buf, int num) +{ + int i; + + addr += ohci->localmem_base; + + for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { + cpu_physical_memory_read(addr, buf, sizeof(*buf)); + *buf = le32_to_cpu(*buf); + } + + return 1; +} + +/* Put an array of dwords in to main memory */ +static inline int put_dwords(OHCIState *ohci, + uint32_t addr, uint32_t *buf, int num) +{ + int i; + + addr += ohci->localmem_base; + + for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { + uint32_t tmp = cpu_to_le32(*buf); + cpu_physical_memory_write(addr, &tmp, sizeof(tmp)); + } + + return 1; +} + +/* Get an array of words from main memory */ +static inline int get_words(OHCIState *ohci, + uint32_t addr, uint16_t *buf, int num) +{ + int i; + + addr += ohci->localmem_base; + + for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { + cpu_physical_memory_read(addr, buf, sizeof(*buf)); + *buf = le16_to_cpu(*buf); + } + + return 1; +} + +/* Put an array of words in to main memory */ +static inline int put_words(OHCIState *ohci, + uint32_t addr, uint16_t *buf, int num) +{ + int i; + + addr += ohci->localmem_base; + + for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { + uint16_t tmp = cpu_to_le16(*buf); + cpu_physical_memory_write(addr, &tmp, sizeof(tmp)); + } + + return 1; +} + +static inline int ohci_read_ed(OHCIState *ohci, + uint32_t addr, struct ohci_ed *ed) +{ + return get_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2); +} + +static inline int ohci_read_td(OHCIState *ohci, + uint32_t addr, struct ohci_td *td) +{ + return get_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2); +} + +static inline int ohci_read_iso_td(OHCIState *ohci, + uint32_t addr, struct ohci_iso_td *td) +{ + return (get_dwords(ohci, addr, (uint32_t *)td, 4) && + get_words(ohci, addr + 16, td->offset, 8)); +} + +static inline int ohci_read_hcca(OHCIState *ohci, + uint32_t addr, struct ohci_hcca *hcca) +{ + cpu_physical_memory_read(addr + ohci->localmem_base, hcca, sizeof(*hcca)); + return 1; +} + +static inline int ohci_put_ed(OHCIState *ohci, + uint32_t addr, struct ohci_ed *ed) +{ + return put_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2); +} + +static inline int ohci_put_td(OHCIState *ohci, + uint32_t addr, struct ohci_td *td) +{ + return put_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2); +} + +static inline int ohci_put_iso_td(OHCIState *ohci, + uint32_t addr, struct ohci_iso_td *td) +{ + return (put_dwords(ohci, addr, (uint32_t *)td, 4) && + put_words(ohci, addr + 16, td->offset, 8)); +} + +static inline int ohci_put_hcca(OHCIState *ohci, + uint32_t addr, struct ohci_hcca *hcca) +{ + cpu_physical_memory_write(addr + ohci->localmem_base, hcca, sizeof(*hcca)); + return 1; +} + +/* Read/Write the contents of a TD from/to main memory. */ +static void ohci_copy_td(OHCIState *ohci, struct ohci_td *td, + uint8_t *buf, int len, int write) +{ + uint32_t ptr; + uint32_t n; + + ptr = td->cbp; + n = 0x1000 - (ptr & 0xfff); + if (n > len) + n = len; + cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, n, write); + if (n == len) + return; + ptr = td->be & ~0xfffu; + buf += n; + cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, len - n, write); +} + +/* Read/Write the contents of an ISO TD from/to main memory. */ +static void ohci_copy_iso_td(OHCIState *ohci, + uint32_t start_addr, uint32_t end_addr, + uint8_t *buf, int len, int write) +{ + uint32_t ptr; + uint32_t n; + + ptr = start_addr; + n = 0x1000 - (ptr & 0xfff); + if (n > len) + n = len; + cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, n, write); + if (n == len) + return; + ptr = end_addr & ~0xfffu; + buf += n; + cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, len - n, write); +} + +static void ohci_process_lists(OHCIState *ohci, int completion); + +static void ohci_async_complete_packet(USBPort *port, USBPacket *packet) +{ + OHCIState *ohci = container_of(packet, OHCIState, usb_packet); +#ifdef DEBUG_PACKET + DPRINTF("Async packet complete\n"); +#endif + ohci->async_complete = 1; + ohci_process_lists(ohci, 1); +} + +#define USUB(a, b) ((int16_t)((uint16_t)(a) - (uint16_t)(b))) + +static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed, + int completion) +{ + int dir; + size_t len = 0; +#ifdef DEBUG_ISOCH + const char *str = NULL; +#endif + int pid; + int ret; + int i; + USBDevice *dev; + USBEndpoint *ep; + struct ohci_iso_td iso_td; + uint32_t addr; + uint16_t starting_frame; + int16_t relative_frame_number; + int frame_count; + uint32_t start_offset, next_offset, end_offset = 0; + uint32_t start_addr, end_addr; + + addr = ed->head & OHCI_DPTR_MASK; + + if (!ohci_read_iso_td(ohci, addr, &iso_td)) { + printf("usb-ohci: ISO_TD read error at %x\n", addr); + return 0; + } + + starting_frame = OHCI_BM(iso_td.flags, TD_SF); + frame_count = OHCI_BM(iso_td.flags, TD_FC); + relative_frame_number = USUB(ohci->frame_number, starting_frame); + +#ifdef DEBUG_ISOCH + printf("--- ISO_TD ED head 0x%.8x tailp 0x%.8x\n" + "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" + "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" + "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" + "frame_number 0x%.8x starting_frame 0x%.8x\n" + "frame_count 0x%.8x relative %d\n" + "di 0x%.8x cc 0x%.8x\n", + ed->head & OHCI_DPTR_MASK, ed->tail & OHCI_DPTR_MASK, + iso_td.flags, iso_td.bp, iso_td.next, iso_td.be, + iso_td.offset[0], iso_td.offset[1], iso_td.offset[2], iso_td.offset[3], + iso_td.offset[4], iso_td.offset[5], iso_td.offset[6], iso_td.offset[7], + ohci->frame_number, starting_frame, + frame_count, relative_frame_number, + OHCI_BM(iso_td.flags, TD_DI), OHCI_BM(iso_td.flags, TD_CC)); +#endif + + if (relative_frame_number < 0) { + DPRINTF("usb-ohci: ISO_TD R=%d < 0\n", relative_frame_number); + return 1; + } else if (relative_frame_number > frame_count) { + /* ISO TD expired - retire the TD to the Done Queue and continue with + the next ISO TD of the same ED */ + DPRINTF("usb-ohci: ISO_TD R=%d > FC=%d\n", relative_frame_number, + frame_count); + OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_DATAOVERRUN); + ed->head &= ~OHCI_DPTR_MASK; + ed->head |= (iso_td.next & OHCI_DPTR_MASK); + iso_td.next = ohci->done; + ohci->done = addr; + i = OHCI_BM(iso_td.flags, TD_DI); + if (i < ohci->done_count) + ohci->done_count = i; + ohci_put_iso_td(ohci, addr, &iso_td); + return 0; + } + + dir = OHCI_BM(ed->flags, ED_D); + switch (dir) { + case OHCI_TD_DIR_IN: +#ifdef DEBUG_ISOCH + str = "in"; +#endif + pid = USB_TOKEN_IN; + break; + case OHCI_TD_DIR_OUT: +#ifdef DEBUG_ISOCH + str = "out"; +#endif + pid = USB_TOKEN_OUT; + break; + case OHCI_TD_DIR_SETUP: +#ifdef DEBUG_ISOCH + str = "setup"; +#endif + pid = USB_TOKEN_SETUP; + break; + default: + printf("usb-ohci: Bad direction %d\n", dir); + return 1; + } + + if (!iso_td.bp || !iso_td.be) { + printf("usb-ohci: ISO_TD bp 0x%.8x be 0x%.8x\n", iso_td.bp, iso_td.be); + return 1; + } + + start_offset = iso_td.offset[relative_frame_number]; + next_offset = iso_td.offset[relative_frame_number + 1]; + + if (!(OHCI_BM(start_offset, TD_PSW_CC) & 0xe) || + ((relative_frame_number < frame_count) && + !(OHCI_BM(next_offset, TD_PSW_CC) & 0xe))) { + printf("usb-ohci: ISO_TD cc != not accessed 0x%.8x 0x%.8x\n", + start_offset, next_offset); + return 1; + } + + if ((relative_frame_number < frame_count) && (start_offset > next_offset)) { + printf("usb-ohci: ISO_TD start_offset=0x%.8x > next_offset=0x%.8x\n", + start_offset, next_offset); + return 1; + } + + if ((start_offset & 0x1000) == 0) { + start_addr = (iso_td.bp & OHCI_PAGE_MASK) | + (start_offset & OHCI_OFFSET_MASK); + } else { + start_addr = (iso_td.be & OHCI_PAGE_MASK) | + (start_offset & OHCI_OFFSET_MASK); + } + + if (relative_frame_number < frame_count) { + end_offset = next_offset - 1; + if ((end_offset & 0x1000) == 0) { + end_addr = (iso_td.bp & OHCI_PAGE_MASK) | + (end_offset & OHCI_OFFSET_MASK); + } else { + end_addr = (iso_td.be & OHCI_PAGE_MASK) | + (end_offset & OHCI_OFFSET_MASK); + } + } else { + /* Last packet in the ISO TD */ + end_addr = iso_td.be; + } + + if ((start_addr & OHCI_PAGE_MASK) != (end_addr & OHCI_PAGE_MASK)) { + len = (end_addr & OHCI_OFFSET_MASK) + 0x1001 + - (start_addr & OHCI_OFFSET_MASK); + } else { + len = end_addr - start_addr + 1; + } + + if (len && dir != OHCI_TD_DIR_IN) { + ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, len, 0); + } + + if (completion) { + ret = ohci->usb_packet.result; + } else { + dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA)); + ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN)); + usb_packet_setup(&ohci->usb_packet, pid, ep); + usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, len); + ret = usb_handle_packet(dev, &ohci->usb_packet); + if (ret == USB_RET_ASYNC) { + return 1; + } + } + +#ifdef DEBUG_ISOCH + printf("so 0x%.8x eo 0x%.8x\nsa 0x%.8x ea 0x%.8x\ndir %s len %zu ret %d\n", + start_offset, end_offset, start_addr, end_addr, str, len, ret); +#endif + + /* Writeback */ + if (dir == OHCI_TD_DIR_IN && ret >= 0 && ret <= len) { + /* IN transfer succeeded */ + ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, ret, 1); + OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, + OHCI_CC_NOERROR); + OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, ret); + } else if (dir == OHCI_TD_DIR_OUT && ret == len) { + /* OUT transfer succeeded */ + OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, + OHCI_CC_NOERROR); + OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 0); + } else { + if (ret > (ssize_t) len) { + printf("usb-ohci: DataOverrun %d > %zu\n", ret, len); + OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, + OHCI_CC_DATAOVERRUN); + OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, + len); + } else if (ret >= 0) { + printf("usb-ohci: DataUnderrun %d\n", ret); + OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, + OHCI_CC_DATAUNDERRUN); + } else { + switch (ret) { + case USB_RET_IOERROR: + case USB_RET_NODEV: + OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, + OHCI_CC_DEVICENOTRESPONDING); + OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, + 0); + break; + case USB_RET_NAK: + case USB_RET_STALL: + printf("usb-ohci: got NAK/STALL %d\n", ret); + OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, + OHCI_CC_STALL); + OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, + 0); + break; + default: + printf("usb-ohci: Bad device response %d\n", ret); + OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, + OHCI_CC_UNDEXPETEDPID); + break; + } + } + } + + if (relative_frame_number == frame_count) { + /* Last data packet of ISO TD - retire the TD to the Done Queue */ + OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_NOERROR); + ed->head &= ~OHCI_DPTR_MASK; + ed->head |= (iso_td.next & OHCI_DPTR_MASK); + iso_td.next = ohci->done; + ohci->done = addr; + i = OHCI_BM(iso_td.flags, TD_DI); + if (i < ohci->done_count) + ohci->done_count = i; + } + ohci_put_iso_td(ohci, addr, &iso_td); + return 1; +} + +/* Service a transport descriptor. + Returns nonzero to terminate processing of this endpoint. */ + +static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed) +{ + int dir; + size_t len = 0, pktlen = 0; +#ifdef DEBUG_PACKET + const char *str = NULL; +#endif + int pid; + int ret; + int i; + USBDevice *dev; + USBEndpoint *ep; + struct ohci_td td; + uint32_t addr; + int flag_r; + int completion; + + addr = ed->head & OHCI_DPTR_MASK; + /* See if this TD has already been submitted to the device. */ + completion = (addr == ohci->async_td); + if (completion && !ohci->async_complete) { +#ifdef DEBUG_PACKET + DPRINTF("Skipping async TD\n"); +#endif + return 1; + } + if (!ohci_read_td(ohci, addr, &td)) { + fprintf(stderr, "usb-ohci: TD read error at %x\n", addr); + return 0; + } + + dir = OHCI_BM(ed->flags, ED_D); + switch (dir) { + case OHCI_TD_DIR_OUT: + case OHCI_TD_DIR_IN: + /* Same value. */ + break; + default: + dir = OHCI_BM(td.flags, TD_DP); + break; + } + + switch (dir) { + case OHCI_TD_DIR_IN: +#ifdef DEBUG_PACKET + str = "in"; +#endif + pid = USB_TOKEN_IN; + break; + case OHCI_TD_DIR_OUT: +#ifdef DEBUG_PACKET + str = "out"; +#endif + pid = USB_TOKEN_OUT; + break; + case OHCI_TD_DIR_SETUP: +#ifdef DEBUG_PACKET + str = "setup"; +#endif + pid = USB_TOKEN_SETUP; + break; + default: + fprintf(stderr, "usb-ohci: Bad direction\n"); + return 1; + } + if (td.cbp && td.be) { + if ((td.cbp & 0xfffff000) != (td.be & 0xfffff000)) { + len = (td.be & 0xfff) + 0x1001 - (td.cbp & 0xfff); + } else { + len = (td.be - td.cbp) + 1; + } + + pktlen = len; + if (len && dir != OHCI_TD_DIR_IN) { + /* The endpoint may not allow us to transfer it all now */ + pktlen = (ed->flags & OHCI_ED_MPS_MASK) >> OHCI_ED_MPS_SHIFT; + if (pktlen > len) { + pktlen = len; + } + if (!completion) { + ohci_copy_td(ohci, &td, ohci->usb_buf, pktlen, 0); + } + } + } + + flag_r = (td.flags & OHCI_TD_R) != 0; +#ifdef DEBUG_PACKET + DPRINTF(" TD @ 0x%.8x %" PRId64 " of %" PRId64 + " bytes %s r=%d cbp=0x%.8x be=0x%.8x\n", + addr, (int64_t)pktlen, (int64_t)len, str, flag_r, td.cbp, td.be); + + if (pktlen > 0 && dir != OHCI_TD_DIR_IN) { + DPRINTF(" data:"); + for (i = 0; i < pktlen; i++) { + printf(" %.2x", ohci->usb_buf[i]); + } + DPRINTF("\n"); + } +#endif + if (completion) { + ret = ohci->usb_packet.result; + ohci->async_td = 0; + ohci->async_complete = 0; + } else { + if (ohci->async_td) { + /* ??? The hardware should allow one active packet per + endpoint. We only allow one active packet per controller. + This should be sufficient as long as devices respond in a + timely manner. + */ +#ifdef DEBUG_PACKET + DPRINTF("Too many pending packets\n"); +#endif + return 1; + } + dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA)); + ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN)); + usb_packet_setup(&ohci->usb_packet, pid, ep); + usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, pktlen); + ret = usb_handle_packet(dev, &ohci->usb_packet); +#ifdef DEBUG_PACKET + DPRINTF("ret=%d\n", ret); +#endif + if (ret == USB_RET_ASYNC) { + ohci->async_td = addr; + return 1; + } + } + if (ret >= 0) { + if (dir == OHCI_TD_DIR_IN) { + ohci_copy_td(ohci, &td, ohci->usb_buf, ret, 1); +#ifdef DEBUG_PACKET + DPRINTF(" data:"); + for (i = 0; i < ret; i++) + printf(" %.2x", ohci->usb_buf[i]); + DPRINTF("\n"); +#endif + } else { + ret = pktlen; + } + } + + /* Writeback */ + if (ret == pktlen || (dir == OHCI_TD_DIR_IN && ret >= 0 && flag_r)) { + /* Transmission succeeded. */ + if (ret == len) { + td.cbp = 0; + } else { + if ((td.cbp & 0xfff) + ret > 0xfff) { + td.cbp = (td.be & ~0xfff) + ((td.cbp + ret) & 0xfff); + } else { + td.cbp += ret; + } + } + td.flags |= OHCI_TD_T1; + td.flags ^= OHCI_TD_T0; + OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_NOERROR); + OHCI_SET_BM(td.flags, TD_EC, 0); + + if ((dir != OHCI_TD_DIR_IN) && (ret != len)) { + /* Partial packet transfer: TD not ready to retire yet */ + goto exit_no_retire; + } + + /* Setting ED_C is part of the TD retirement process */ + ed->head &= ~OHCI_ED_C; + if (td.flags & OHCI_TD_T0) + ed->head |= OHCI_ED_C; + } else { + if (ret >= 0) { + DPRINTF("usb-ohci: Underrun\n"); + OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAUNDERRUN); + } else { + switch (ret) { + case USB_RET_IOERROR: + case USB_RET_NODEV: + OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DEVICENOTRESPONDING); + case USB_RET_NAK: + DPRINTF("usb-ohci: got NAK\n"); + return 1; + case USB_RET_STALL: + DPRINTF("usb-ohci: got STALL\n"); + OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_STALL); + break; + case USB_RET_BABBLE: + DPRINTF("usb-ohci: got BABBLE\n"); + OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAOVERRUN); + break; + default: + fprintf(stderr, "usb-ohci: Bad device response %d\n", ret); + OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_UNDEXPETEDPID); + OHCI_SET_BM(td.flags, TD_EC, 3); + break; + } + } + ed->head |= OHCI_ED_H; + } + + /* Retire this TD */ + ed->head &= ~OHCI_DPTR_MASK; + ed->head |= td.next & OHCI_DPTR_MASK; + td.next = ohci->done; + ohci->done = addr; + i = OHCI_BM(td.flags, TD_DI); + if (i < ohci->done_count) + ohci->done_count = i; +exit_no_retire: + ohci_put_td(ohci, addr, &td); + return OHCI_BM(td.flags, TD_CC) != OHCI_CC_NOERROR; +} + +/* Service an endpoint list. Returns nonzero if active TD were found. */ +static int ohci_service_ed_list(OHCIState *ohci, uint32_t head, int completion) +{ + struct ohci_ed ed; + uint32_t next_ed; + uint32_t cur; + int active; + + active = 0; + + if (head == 0) + return 0; + + for (cur = head; cur; cur = next_ed) { + if (!ohci_read_ed(ohci, cur, &ed)) { + fprintf(stderr, "usb-ohci: ED read error at %x\n", cur); + return 0; + } + + next_ed = ed.next & OHCI_DPTR_MASK; + + if ((ed.head & OHCI_ED_H) || (ed.flags & OHCI_ED_K)) { + uint32_t addr; + /* Cancel pending packets for ED that have been paused. */ + addr = ed.head & OHCI_DPTR_MASK; + if (ohci->async_td && addr == ohci->async_td) { + usb_cancel_packet(&ohci->usb_packet); + ohci->async_td = 0; + } + continue; + } + + while ((ed.head & OHCI_DPTR_MASK) != ed.tail) { +#ifdef DEBUG_PACKET + DPRINTF("ED @ 0x%.8x fa=%u en=%u d=%u s=%u k=%u f=%u mps=%u " + "h=%u c=%u\n head=0x%.8x tailp=0x%.8x next=0x%.8x\n", cur, + OHCI_BM(ed.flags, ED_FA), OHCI_BM(ed.flags, ED_EN), + OHCI_BM(ed.flags, ED_D), (ed.flags & OHCI_ED_S)!= 0, + (ed.flags & OHCI_ED_K) != 0, (ed.flags & OHCI_ED_F) != 0, + OHCI_BM(ed.flags, ED_MPS), (ed.head & OHCI_ED_H) != 0, + (ed.head & OHCI_ED_C) != 0, ed.head & OHCI_DPTR_MASK, + ed.tail & OHCI_DPTR_MASK, ed.next & OHCI_DPTR_MASK); +#endif + active = 1; + + if ((ed.flags & OHCI_ED_F) == 0) { + if (ohci_service_td(ohci, &ed)) + break; + } else { + /* Handle isochronous endpoints */ + if (ohci_service_iso_td(ohci, &ed, completion)) + break; + } + } + + ohci_put_ed(ohci, cur, &ed); + } + + return active; +} + +/* Generate a SOF event, and set a timer for EOF */ +static void ohci_sof(OHCIState *ohci) +{ + ohci->sof_time = qemu_get_clock_ns(vm_clock); + qemu_mod_timer(ohci->eof_timer, ohci->sof_time + usb_frame_time); + ohci_set_interrupt(ohci, OHCI_INTR_SF); +} + +/* Process Control and Bulk lists. */ +static void ohci_process_lists(OHCIState *ohci, int completion) +{ + if ((ohci->ctl & OHCI_CTL_CLE) && (ohci->status & OHCI_STATUS_CLF)) { + if (ohci->ctrl_cur && ohci->ctrl_cur != ohci->ctrl_head) { + DPRINTF("usb-ohci: head %x, cur %x\n", + ohci->ctrl_head, ohci->ctrl_cur); + } + if (!ohci_service_ed_list(ohci, ohci->ctrl_head, completion)) { + ohci->ctrl_cur = 0; + ohci->status &= ~OHCI_STATUS_CLF; + } + } + + if ((ohci->ctl & OHCI_CTL_BLE) && (ohci->status & OHCI_STATUS_BLF)) { + if (!ohci_service_ed_list(ohci, ohci->bulk_head, completion)) { + ohci->bulk_cur = 0; + ohci->status &= ~OHCI_STATUS_BLF; + } + } +} + +/* Do frame processing on frame boundary */ +static void ohci_frame_boundary(void *opaque) +{ + OHCIState *ohci = opaque; + struct ohci_hcca hcca; + + ohci_read_hcca(ohci, ohci->hcca, &hcca); + + /* Process all the lists at the end of the frame */ + if (ohci->ctl & OHCI_CTL_PLE) { + int n; + + n = ohci->frame_number & 0x1f; + ohci_service_ed_list(ohci, le32_to_cpu(hcca.intr[n]), 0); + } + + /* Cancel all pending packets if either of the lists has been disabled. */ + if (ohci->async_td && + ohci->old_ctl & (~ohci->ctl) & (OHCI_CTL_BLE | OHCI_CTL_CLE)) { + usb_cancel_packet(&ohci->usb_packet); + ohci->async_td = 0; + } + ohci->old_ctl = ohci->ctl; + ohci_process_lists(ohci, 0); + + /* Frame boundary, so do EOF stuf here */ + ohci->frt = ohci->fit; + + /* Increment frame number and take care of endianness. */ + ohci->frame_number = (ohci->frame_number + 1) & 0xffff; + hcca.frame = cpu_to_le16(ohci->frame_number); + + if (ohci->done_count == 0 && !(ohci->intr_status & OHCI_INTR_WD)) { + if (!ohci->done) + abort(); + if (ohci->intr & ohci->intr_status) + ohci->done |= 1; + hcca.done = cpu_to_le32(ohci->done); + ohci->done = 0; + ohci->done_count = 7; + ohci_set_interrupt(ohci, OHCI_INTR_WD); + } + + if (ohci->done_count != 7 && ohci->done_count != 0) + ohci->done_count--; + + /* Do SOF stuff here */ + ohci_sof(ohci); + + /* Writeback HCCA */ + ohci_put_hcca(ohci, ohci->hcca, &hcca); +} + +/* Start sending SOF tokens across the USB bus, lists are processed in + * next frame + */ +static int ohci_bus_start(OHCIState *ohci) +{ + ohci->eof_timer = qemu_new_timer_ns(vm_clock, + ohci_frame_boundary, + ohci); + + if (ohci->eof_timer == NULL) { + fprintf(stderr, "usb-ohci: %s: qemu_new_timer_ns failed\n", ohci->name); + /* TODO: Signal unrecoverable error */ + return 0; + } + + DPRINTF("usb-ohci: %s: USB Operational\n", ohci->name); + + ohci_sof(ohci); + + return 1; +} + +/* Stop sending SOF tokens on the bus */ +static void ohci_bus_stop(OHCIState *ohci) +{ + if (ohci->eof_timer) + qemu_del_timer(ohci->eof_timer); + ohci->eof_timer = NULL; +} + +/* Sets a flag in a port status register but only set it if the port is + * connected, if not set ConnectStatusChange flag. If flag is enabled + * return 1. + */ +static int ohci_port_set_if_connected(OHCIState *ohci, int i, uint32_t val) +{ + int ret = 1; + + /* writing a 0 has no effect */ + if (val == 0) + return 0; + + /* If CurrentConnectStatus is cleared we set + * ConnectStatusChange + */ + if (!(ohci->rhport[i].ctrl & OHCI_PORT_CCS)) { + ohci->rhport[i].ctrl |= OHCI_PORT_CSC; + if (ohci->rhstatus & OHCI_RHS_DRWE) { + /* TODO: CSC is a wakeup event */ + } + return 0; + } + + if (ohci->rhport[i].ctrl & val) + ret = 0; + + /* set the bit */ + ohci->rhport[i].ctrl |= val; + + return ret; +} + +/* Set the frame interval - frame interval toggle is manipulated by the hcd only */ +static void ohci_set_frame_interval(OHCIState *ohci, uint16_t val) +{ + val &= OHCI_FMI_FI; + + if (val != ohci->fi) { + DPRINTF("usb-ohci: %s: FrameInterval = 0x%x (%u)\n", + ohci->name, ohci->fi, ohci->fi); + } + + ohci->fi = val; +} + +static void ohci_port_power(OHCIState *ohci, int i, int p) +{ + if (p) { + ohci->rhport[i].ctrl |= OHCI_PORT_PPS; + } else { + ohci->rhport[i].ctrl &= ~(OHCI_PORT_PPS| + OHCI_PORT_CCS| + OHCI_PORT_PSS| + OHCI_PORT_PRS); + } +} + +/* Set HcControlRegister */ +static void ohci_set_ctl(OHCIState *ohci, uint32_t val) +{ + uint32_t old_state; + uint32_t new_state; + + old_state = ohci->ctl & OHCI_CTL_HCFS; + ohci->ctl = val; + new_state = ohci->ctl & OHCI_CTL_HCFS; + + /* no state change */ + if (old_state == new_state) + return; + + switch (new_state) { + case OHCI_USB_OPERATIONAL: + ohci_bus_start(ohci); + break; + case OHCI_USB_SUSPEND: + ohci_bus_stop(ohci); + DPRINTF("usb-ohci: %s: USB Suspended\n", ohci->name); + break; + case OHCI_USB_RESUME: + DPRINTF("usb-ohci: %s: USB Resume\n", ohci->name); + break; + case OHCI_USB_RESET: + ohci_reset(ohci); + DPRINTF("usb-ohci: %s: USB Reset\n", ohci->name); + break; + } +} + +static uint32_t ohci_get_frame_remaining(OHCIState *ohci) +{ + uint16_t fr; + int64_t tks; + + if ((ohci->ctl & OHCI_CTL_HCFS) != OHCI_USB_OPERATIONAL) + return (ohci->frt << 31); + + /* Being in USB operational state guarnatees sof_time was + * set already. + */ + tks = qemu_get_clock_ns(vm_clock) - ohci->sof_time; + + /* avoid muldiv if possible */ + if (tks >= usb_frame_time) + return (ohci->frt << 31); + + tks = muldiv64(1, tks, usb_bit_time); + fr = (uint16_t)(ohci->fi - tks); + + return (ohci->frt << 31) | fr; +} + + +/* Set root hub status */ +static void ohci_set_hub_status(OHCIState *ohci, uint32_t val) +{ + uint32_t old_state; + + old_state = ohci->rhstatus; + + /* write 1 to clear OCIC */ + if (val & OHCI_RHS_OCIC) + ohci->rhstatus &= ~OHCI_RHS_OCIC; + + if (val & OHCI_RHS_LPS) { + int i; + + for (i = 0; i < ohci->num_ports; i++) + ohci_port_power(ohci, i, 0); + DPRINTF("usb-ohci: powered down all ports\n"); + } + + if (val & OHCI_RHS_LPSC) { + int i; + + for (i = 0; i < ohci->num_ports; i++) + ohci_port_power(ohci, i, 1); + DPRINTF("usb-ohci: powered up all ports\n"); + } + + if (val & OHCI_RHS_DRWE) + ohci->rhstatus |= OHCI_RHS_DRWE; + + if (val & OHCI_RHS_CRWE) + ohci->rhstatus &= ~OHCI_RHS_DRWE; + + if (old_state != ohci->rhstatus) + ohci_set_interrupt(ohci, OHCI_INTR_RHSC); +} + +/* Set root hub port status */ +static void ohci_port_set_status(OHCIState *ohci, int portnum, uint32_t val) +{ + uint32_t old_state; + OHCIPort *port; + + port = &ohci->rhport[portnum]; + old_state = port->ctrl; + + /* Write to clear CSC, PESC, PSSC, OCIC, PRSC */ + if (val & OHCI_PORT_WTC) + port->ctrl &= ~(val & OHCI_PORT_WTC); + + if (val & OHCI_PORT_CCS) + port->ctrl &= ~OHCI_PORT_PES; + + ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PES); + + if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PSS)) { + DPRINTF("usb-ohci: port %d: SUSPEND\n", portnum); + } + + if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PRS)) { + DPRINTF("usb-ohci: port %d: RESET\n", portnum); + usb_device_reset(port->port.dev); + port->ctrl &= ~OHCI_PORT_PRS; + /* ??? Should this also set OHCI_PORT_PESC. */ + port->ctrl |= OHCI_PORT_PES | OHCI_PORT_PRSC; + } + + /* Invert order here to ensure in ambiguous case, device is + * powered up... + */ + if (val & OHCI_PORT_LSDA) + ohci_port_power(ohci, portnum, 0); + if (val & OHCI_PORT_PPS) + ohci_port_power(ohci, portnum, 1); + + if (old_state != port->ctrl) + ohci_set_interrupt(ohci, OHCI_INTR_RHSC); + + return; +} + +static uint64_t ohci_mem_read(void *opaque, + target_phys_addr_t addr, + unsigned size) +{ + OHCIState *ohci = opaque; + uint32_t retval; + + /* Only aligned reads are allowed on OHCI */ + if (addr & 3) { + fprintf(stderr, "usb-ohci: Mis-aligned read\n"); + return 0xffffffff; + } else if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { + /* HcRhPortStatus */ + retval = ohci->rhport[(addr - 0x54) >> 2].ctrl | OHCI_PORT_PPS; + } else { + switch (addr >> 2) { + case 0: /* HcRevision */ + retval = 0x10; + break; + + case 1: /* HcControl */ + retval = ohci->ctl; + break; + + case 2: /* HcCommandStatus */ + retval = ohci->status; + break; + + case 3: /* HcInterruptStatus */ + retval = ohci->intr_status; + break; + + case 4: /* HcInterruptEnable */ + case 5: /* HcInterruptDisable */ + retval = ohci->intr; + break; + + case 6: /* HcHCCA */ + retval = ohci->hcca; + break; + + case 7: /* HcPeriodCurrentED */ + retval = ohci->per_cur; + break; + + case 8: /* HcControlHeadED */ + retval = ohci->ctrl_head; + break; + + case 9: /* HcControlCurrentED */ + retval = ohci->ctrl_cur; + break; + + case 10: /* HcBulkHeadED */ + retval = ohci->bulk_head; + break; + + case 11: /* HcBulkCurrentED */ + retval = ohci->bulk_cur; + break; + + case 12: /* HcDoneHead */ + retval = ohci->done; + break; + + case 13: /* HcFmInterretval */ + retval = (ohci->fit << 31) | (ohci->fsmps << 16) | (ohci->fi); + break; + + case 14: /* HcFmRemaining */ + retval = ohci_get_frame_remaining(ohci); + break; + + case 15: /* HcFmNumber */ + retval = ohci->frame_number; + break; + + case 16: /* HcPeriodicStart */ + retval = ohci->pstart; + break; + + case 17: /* HcLSThreshold */ + retval = ohci->lst; + break; + + case 18: /* HcRhDescriptorA */ + retval = ohci->rhdesc_a; + break; + + case 19: /* HcRhDescriptorB */ + retval = ohci->rhdesc_b; + break; + + case 20: /* HcRhStatus */ + retval = ohci->rhstatus; + break; + + /* PXA27x specific registers */ + case 24: /* HcStatus */ + retval = ohci->hstatus & ohci->hmask; + break; + + case 25: /* HcHReset */ + retval = ohci->hreset; + break; + + case 26: /* HcHInterruptEnable */ + retval = ohci->hmask; + break; + + case 27: /* HcHInterruptTest */ + retval = ohci->htest; + break; + + default: + fprintf(stderr, "ohci_read: Bad offset %x\n", (int)addr); + retval = 0xffffffff; + } + } + + return retval; +} + +static void ohci_mem_write(void *opaque, + target_phys_addr_t addr, + uint64_t val, + unsigned size) +{ + OHCIState *ohci = opaque; + + /* Only aligned reads are allowed on OHCI */ + if (addr & 3) { + fprintf(stderr, "usb-ohci: Mis-aligned write\n"); + return; + } + + if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { + /* HcRhPortStatus */ + ohci_port_set_status(ohci, (addr - 0x54) >> 2, val); + return; + } + + switch (addr >> 2) { + case 1: /* HcControl */ + ohci_set_ctl(ohci, val); + break; + + case 2: /* HcCommandStatus */ + /* SOC is read-only */ + val = (val & ~OHCI_STATUS_SOC); + + /* Bits written as '0' remain unchanged in the register */ + ohci->status |= val; + + if (ohci->status & OHCI_STATUS_HCR) + ohci_reset(ohci); + break; + + case 3: /* HcInterruptStatus */ + ohci->intr_status &= ~val; + ohci_intr_update(ohci); + break; + + case 4: /* HcInterruptEnable */ + ohci->intr |= val; + ohci_intr_update(ohci); + break; + + case 5: /* HcInterruptDisable */ + ohci->intr &= ~val; + ohci_intr_update(ohci); + break; + + case 6: /* HcHCCA */ + ohci->hcca = val & OHCI_HCCA_MASK; + break; + + case 7: /* HcPeriodCurrentED */ + /* Ignore writes to this read-only register, Linux does them */ + break; + + case 8: /* HcControlHeadED */ + ohci->ctrl_head = val & OHCI_EDPTR_MASK; + break; + + case 9: /* HcControlCurrentED */ + ohci->ctrl_cur = val & OHCI_EDPTR_MASK; + break; + + case 10: /* HcBulkHeadED */ + ohci->bulk_head = val & OHCI_EDPTR_MASK; + break; + + case 11: /* HcBulkCurrentED */ + ohci->bulk_cur = val & OHCI_EDPTR_MASK; + break; + + case 13: /* HcFmInterval */ + ohci->fsmps = (val & OHCI_FMI_FSMPS) >> 16; + ohci->fit = (val & OHCI_FMI_FIT) >> 31; + ohci_set_frame_interval(ohci, val); + break; + + case 15: /* HcFmNumber */ + break; + + case 16: /* HcPeriodicStart */ + ohci->pstart = val & 0xffff; + break; + + case 17: /* HcLSThreshold */ + ohci->lst = val & 0xffff; + break; + + case 18: /* HcRhDescriptorA */ + ohci->rhdesc_a &= ~OHCI_RHA_RW_MASK; + ohci->rhdesc_a |= val & OHCI_RHA_RW_MASK; + break; + + case 19: /* HcRhDescriptorB */ + break; + + case 20: /* HcRhStatus */ + ohci_set_hub_status(ohci, val); + break; + + /* PXA27x specific registers */ + case 24: /* HcStatus */ + ohci->hstatus &= ~(val & ohci->hmask); + + case 25: /* HcHReset */ + ohci->hreset = val & ~OHCI_HRESET_FSBIR; + if (val & OHCI_HRESET_FSBIR) + ohci_reset(ohci); + break; + + case 26: /* HcHInterruptEnable */ + ohci->hmask = val; + break; + + case 27: /* HcHInterruptTest */ + ohci->htest = val; + break; + + default: + fprintf(stderr, "ohci_write: Bad offset %x\n", (int)addr); + break; + } +} + +static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev) +{ + if (ohci->async_td && + usb_packet_is_inflight(&ohci->usb_packet) && + ohci->usb_packet.ep->dev == dev) { + usb_cancel_packet(&ohci->usb_packet); + ohci->async_td = 0; + } +} + +static const MemoryRegionOps ohci_mem_ops = { + .read = ohci_mem_read, + .write = ohci_mem_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static USBPortOps ohci_port_ops = { + .attach = ohci_attach, + .detach = ohci_detach, + .child_detach = ohci_child_detach, + .wakeup = ohci_wakeup, + .complete = ohci_async_complete_packet, +}; + +static USBBusOps ohci_bus_ops = { +}; + +static int usb_ohci_init(OHCIState *ohci, DeviceState *dev, + int num_ports, uint32_t localmem_base, + char *masterbus, uint32_t firstport) +{ + int i; + + if (usb_frame_time == 0) { +#ifdef OHCI_TIME_WARP + usb_frame_time = get_ticks_per_sec(); + usb_bit_time = muldiv64(1, get_ticks_per_sec(), USB_HZ/1000); +#else + usb_frame_time = muldiv64(1, get_ticks_per_sec(), 1000); + if (get_ticks_per_sec() >= USB_HZ) { + usb_bit_time = muldiv64(1, get_ticks_per_sec(), USB_HZ); + } else { + usb_bit_time = 1; + } +#endif + DPRINTF("usb-ohci: usb_bit_time=%" PRId64 " usb_frame_time=%" PRId64 "\n", + usb_frame_time, usb_bit_time); + } + + ohci->num_ports = num_ports; + if (masterbus) { + USBPort *ports[OHCI_MAX_PORTS]; + for(i = 0; i < num_ports; i++) { + ports[i] = &ohci->rhport[i].port; + } + if (usb_register_companion(masterbus, ports, num_ports, + firstport, ohci, &ohci_port_ops, + USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL) != 0) { + return -1; + } + } else { + usb_bus_new(&ohci->bus, &ohci_bus_ops, dev); + for (i = 0; i < num_ports; i++) { + usb_register_port(&ohci->bus, &ohci->rhport[i].port, + ohci, i, &ohci_port_ops, + USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL); + } + } + + memory_region_init_io(&ohci->mem, &ohci_mem_ops, ohci, "ohci", 256); + ohci->localmem_base = localmem_base; + + ohci->name = object_get_typename(OBJECT(dev)); + usb_packet_init(&ohci->usb_packet); + + ohci->async_td = 0; + qemu_register_reset(ohci_reset, ohci); + + return 0; +} + +typedef struct { + PCIDevice pci_dev; + OHCIState state; + char *masterbus; + uint32_t num_ports; + uint32_t firstport; +} OHCIPCIState; + +static int usb_ohci_initfn_pci(struct PCIDevice *dev) +{ + OHCIPCIState *ohci = DO_UPCAST(OHCIPCIState, pci_dev, dev); + + ohci->pci_dev.config[PCI_CLASS_PROG] = 0x10; /* OHCI */ + ohci->pci_dev.config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */ + + if (usb_ohci_init(&ohci->state, &dev->qdev, ohci->num_ports, 0, + ohci->masterbus, ohci->firstport) != 0) { + return -1; + } + ohci->state.irq = ohci->pci_dev.irq[0]; + + /* TODO: avoid cast below by using dev */ + pci_register_bar(&ohci->pci_dev, 0, 0, &ohci->state.mem); + return 0; +} + +void usb_ohci_init_pci(struct PCIBus *bus, int devfn) +{ + pci_create_simple(bus, devfn, "pci-ohci"); +} + +typedef struct { + SysBusDevice busdev; + OHCIState ohci; + uint32_t num_ports; + target_phys_addr_t dma_offset; +} OHCISysBusState; + +static int ohci_init_pxa(SysBusDevice *dev) +{ + OHCISysBusState *s = FROM_SYSBUS(OHCISysBusState, dev); + + /* Cannot fail as we pass NULL for masterbus */ + usb_ohci_init(&s->ohci, &dev->qdev, s->num_ports, s->dma_offset, NULL, 0); + sysbus_init_irq(dev, &s->ohci.irq); + sysbus_init_mmio(dev, &s->ohci.mem); + + return 0; +} + +static Property ohci_pci_properties[] = { + DEFINE_PROP_STRING("masterbus", OHCIPCIState, masterbus), + DEFINE_PROP_UINT32("num-ports", OHCIPCIState, num_ports, 3), + DEFINE_PROP_UINT32("firstport", OHCIPCIState, firstport, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void ohci_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); + + k->init = usb_ohci_initfn_pci; + k->vendor_id = PCI_VENDOR_ID_APPLE; + k->device_id = PCI_DEVICE_ID_APPLE_IPID_USB; + k->class_id = PCI_CLASS_SERIAL_USB; + dc->desc = "Apple USB Controller"; + dc->props = ohci_pci_properties; +} + +static TypeInfo ohci_pci_info = { + .name = "pci-ohci", + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(OHCIPCIState), + .class_init = ohci_pci_class_init, +}; + +static Property ohci_sysbus_properties[] = { + DEFINE_PROP_UINT32("num-ports", OHCISysBusState, num_ports, 3), + DEFINE_PROP_TADDR("dma-offset", OHCISysBusState, dma_offset, 3), + DEFINE_PROP_END_OF_LIST(), +}; + +static void ohci_sysbus_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + SysBusDeviceClass *sbc = SYS_BUS_DEVICE_CLASS(klass); + + sbc->init = ohci_init_pxa; + dc->desc = "OHCI USB Controller"; + dc->props = ohci_sysbus_properties; +} + +static TypeInfo ohci_sysbus_info = { + .name = "sysbus-ohci", + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(OHCISysBusState), + .class_init = ohci_sysbus_class_init, +}; + +static void ohci_register_types(void) +{ + type_register_static(&ohci_pci_info); + type_register_static(&ohci_sysbus_info); +} + +type_init(ohci_register_types) |