diff options
Diffstat (limited to 'hw/usb/hcd-ehci.c')
-rw-r--r-- | hw/usb/hcd-ehci.c | 2345 |
1 files changed, 2345 insertions, 0 deletions
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c new file mode 100644 index 0000000000..58811d3ef0 --- /dev/null +++ b/hw/usb/hcd-ehci.c @@ -0,0 +1,2345 @@ +/* + * QEMU USB EHCI Emulation + * + * Copyright(c) 2008 Emutex Ltd. (address@hidden) + * + * EHCI project was started by Mark Burkley, with contributions by + * Niels de Vos. David S. Ahern continued working on it. Kevin Wolf, + * Jan Kiszka and Vincent Palatin contributed bugfixes. + * + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or(at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "hw/hw.h" +#include "qemu-timer.h" +#include "hw/usb.h" +#include "hw/pci.h" +#include "monitor.h" +#include "trace.h" +#include "dma.h" + +#define EHCI_DEBUG 0 + +#if EHCI_DEBUG +#define DPRINTF printf +#else +#define DPRINTF(...) +#endif + +/* internal processing - reset HC to try and recover */ +#define USB_RET_PROCERR (-99) + +#define MMIO_SIZE 0x1000 + +/* Capability Registers Base Address - section 2.2 */ +#define CAPREGBASE 0x0000 +#define CAPLENGTH CAPREGBASE + 0x0000 // 1-byte, 0x0001 reserved +#define HCIVERSION CAPREGBASE + 0x0002 // 2-bytes, i/f version # +#define HCSPARAMS CAPREGBASE + 0x0004 // 4-bytes, structural params +#define HCCPARAMS CAPREGBASE + 0x0008 // 4-bytes, capability params +#define EECP HCCPARAMS + 1 +#define HCSPPORTROUTE1 CAPREGBASE + 0x000c +#define HCSPPORTROUTE2 CAPREGBASE + 0x0010 + +#define OPREGBASE 0x0020 // Operational Registers Base Address + +#define USBCMD OPREGBASE + 0x0000 +#define USBCMD_RUNSTOP (1 << 0) // run / Stop +#define USBCMD_HCRESET (1 << 1) // HC Reset +#define USBCMD_FLS (3 << 2) // Frame List Size +#define USBCMD_FLS_SH 2 // Frame List Size Shift +#define USBCMD_PSE (1 << 4) // Periodic Schedule Enable +#define USBCMD_ASE (1 << 5) // Asynch Schedule Enable +#define USBCMD_IAAD (1 << 6) // Int Asynch Advance Doorbell +#define USBCMD_LHCR (1 << 7) // Light Host Controller Reset +#define USBCMD_ASPMC (3 << 8) // Async Sched Park Mode Count +#define USBCMD_ASPME (1 << 11) // Async Sched Park Mode Enable +#define USBCMD_ITC (0x7f << 16) // Int Threshold Control +#define USBCMD_ITC_SH 16 // Int Threshold Control Shift + +#define USBSTS OPREGBASE + 0x0004 +#define USBSTS_RO_MASK 0x0000003f +#define USBSTS_INT (1 << 0) // USB Interrupt +#define USBSTS_ERRINT (1 << 1) // Error Interrupt +#define USBSTS_PCD (1 << 2) // Port Change Detect +#define USBSTS_FLR (1 << 3) // Frame List Rollover +#define USBSTS_HSE (1 << 4) // Host System Error +#define USBSTS_IAA (1 << 5) // Interrupt on Async Advance +#define USBSTS_HALT (1 << 12) // HC Halted +#define USBSTS_REC (1 << 13) // Reclamation +#define USBSTS_PSS (1 << 14) // Periodic Schedule Status +#define USBSTS_ASS (1 << 15) // Asynchronous Schedule Status + +/* + * Interrupt enable bits correspond to the interrupt active bits in USBSTS + * so no need to redefine here. + */ +#define USBINTR OPREGBASE + 0x0008 +#define USBINTR_MASK 0x0000003f + +#define FRINDEX OPREGBASE + 0x000c +#define CTRLDSSEGMENT OPREGBASE + 0x0010 +#define PERIODICLISTBASE OPREGBASE + 0x0014 +#define ASYNCLISTADDR OPREGBASE + 0x0018 +#define ASYNCLISTADDR_MASK 0xffffffe0 + +#define CONFIGFLAG OPREGBASE + 0x0040 + +#define PORTSC (OPREGBASE + 0x0044) +#define PORTSC_BEGIN PORTSC +#define PORTSC_END (PORTSC + 4 * NB_PORTS) +/* + * Bits that are reserved or are read-only are masked out of values + * written to us by software + */ +#define PORTSC_RO_MASK 0x007001c0 +#define PORTSC_RWC_MASK 0x0000002a +#define PORTSC_WKOC_E (1 << 22) // Wake on Over Current Enable +#define PORTSC_WKDS_E (1 << 21) // Wake on Disconnect Enable +#define PORTSC_WKCN_E (1 << 20) // Wake on Connect Enable +#define PORTSC_PTC (15 << 16) // Port Test Control +#define PORTSC_PTC_SH 16 // Port Test Control shift +#define PORTSC_PIC (3 << 14) // Port Indicator Control +#define PORTSC_PIC_SH 14 // Port Indicator Control Shift +#define PORTSC_POWNER (1 << 13) // Port Owner +#define PORTSC_PPOWER (1 << 12) // Port Power +#define PORTSC_LINESTAT (3 << 10) // Port Line Status +#define PORTSC_LINESTAT_SH 10 // Port Line Status Shift +#define PORTSC_PRESET (1 << 8) // Port Reset +#define PORTSC_SUSPEND (1 << 7) // Port Suspend +#define PORTSC_FPRES (1 << 6) // Force Port Resume +#define PORTSC_OCC (1 << 5) // Over Current Change +#define PORTSC_OCA (1 << 4) // Over Current Active +#define PORTSC_PEDC (1 << 3) // Port Enable/Disable Change +#define PORTSC_PED (1 << 2) // Port Enable/Disable +#define PORTSC_CSC (1 << 1) // Connect Status Change +#define PORTSC_CONNECT (1 << 0) // Current Connect Status + +#define FRAME_TIMER_FREQ 1000 +#define FRAME_TIMER_NS (1000000000 / FRAME_TIMER_FREQ) + +#define NB_MAXINTRATE 8 // Max rate at which controller issues ints +#define NB_PORTS 6 // Number of downstream ports +#define BUFF_SIZE 5*4096 // Max bytes to transfer per transaction +#define MAX_ITERATIONS 20 // Max number of QH before we break the loop +#define MAX_QH 100 // Max allowable queue heads in a chain + +/* Internal periodic / asynchronous schedule state machine states + */ +typedef enum { + EST_INACTIVE = 1000, + EST_ACTIVE, + EST_EXECUTING, + EST_SLEEPING, + /* The following states are internal to the state machine function + */ + EST_WAITLISTHEAD, + EST_FETCHENTRY, + EST_FETCHQH, + EST_FETCHITD, + EST_FETCHSITD, + EST_ADVANCEQUEUE, + EST_FETCHQTD, + EST_EXECUTE, + EST_WRITEBACK, + EST_HORIZONTALQH +} EHCI_STATES; + +/* macros for accessing fields within next link pointer entry */ +#define NLPTR_GET(x) ((x) & 0xffffffe0) +#define NLPTR_TYPE_GET(x) (((x) >> 1) & 3) +#define NLPTR_TBIT(x) ((x) & 1) // 1=invalid, 0=valid + +/* link pointer types */ +#define NLPTR_TYPE_ITD 0 // isoc xfer descriptor +#define NLPTR_TYPE_QH 1 // queue head +#define NLPTR_TYPE_STITD 2 // split xaction, isoc xfer descriptor +#define NLPTR_TYPE_FSTN 3 // frame span traversal node + + +/* EHCI spec version 1.0 Section 3.3 + */ +typedef struct EHCIitd { + uint32_t next; + + uint32_t transact[8]; +#define ITD_XACT_ACTIVE (1 << 31) +#define ITD_XACT_DBERROR (1 << 30) +#define ITD_XACT_BABBLE (1 << 29) +#define ITD_XACT_XACTERR (1 << 28) +#define ITD_XACT_LENGTH_MASK 0x0fff0000 +#define ITD_XACT_LENGTH_SH 16 +#define ITD_XACT_IOC (1 << 15) +#define ITD_XACT_PGSEL_MASK 0x00007000 +#define ITD_XACT_PGSEL_SH 12 +#define ITD_XACT_OFFSET_MASK 0x00000fff + + uint32_t bufptr[7]; +#define ITD_BUFPTR_MASK 0xfffff000 +#define ITD_BUFPTR_SH 12 +#define ITD_BUFPTR_EP_MASK 0x00000f00 +#define ITD_BUFPTR_EP_SH 8 +#define ITD_BUFPTR_DEVADDR_MASK 0x0000007f +#define ITD_BUFPTR_DEVADDR_SH 0 +#define ITD_BUFPTR_DIRECTION (1 << 11) +#define ITD_BUFPTR_MAXPKT_MASK 0x000007ff +#define ITD_BUFPTR_MAXPKT_SH 0 +#define ITD_BUFPTR_MULT_MASK 0x00000003 +#define ITD_BUFPTR_MULT_SH 0 +} EHCIitd; + +/* EHCI spec version 1.0 Section 3.4 + */ +typedef struct EHCIsitd { + uint32_t next; // Standard next link pointer + uint32_t epchar; +#define SITD_EPCHAR_IO (1 << 31) +#define SITD_EPCHAR_PORTNUM_MASK 0x7f000000 +#define SITD_EPCHAR_PORTNUM_SH 24 +#define SITD_EPCHAR_HUBADD_MASK 0x007f0000 +#define SITD_EPCHAR_HUBADDR_SH 16 +#define SITD_EPCHAR_EPNUM_MASK 0x00000f00 +#define SITD_EPCHAR_EPNUM_SH 8 +#define SITD_EPCHAR_DEVADDR_MASK 0x0000007f + + uint32_t uframe; +#define SITD_UFRAME_CMASK_MASK 0x0000ff00 +#define SITD_UFRAME_CMASK_SH 8 +#define SITD_UFRAME_SMASK_MASK 0x000000ff + + uint32_t results; +#define SITD_RESULTS_IOC (1 << 31) +#define SITD_RESULTS_PGSEL (1 << 30) +#define SITD_RESULTS_TBYTES_MASK 0x03ff0000 +#define SITD_RESULTS_TYBYTES_SH 16 +#define SITD_RESULTS_CPROGMASK_MASK 0x0000ff00 +#define SITD_RESULTS_CPROGMASK_SH 8 +#define SITD_RESULTS_ACTIVE (1 << 7) +#define SITD_RESULTS_ERR (1 << 6) +#define SITD_RESULTS_DBERR (1 << 5) +#define SITD_RESULTS_BABBLE (1 << 4) +#define SITD_RESULTS_XACTERR (1 << 3) +#define SITD_RESULTS_MISSEDUF (1 << 2) +#define SITD_RESULTS_SPLITXSTATE (1 << 1) + + uint32_t bufptr[2]; +#define SITD_BUFPTR_MASK 0xfffff000 +#define SITD_BUFPTR_CURROFF_MASK 0x00000fff +#define SITD_BUFPTR_TPOS_MASK 0x00000018 +#define SITD_BUFPTR_TPOS_SH 3 +#define SITD_BUFPTR_TCNT_MASK 0x00000007 + + uint32_t backptr; // Standard next link pointer +} EHCIsitd; + +/* EHCI spec version 1.0 Section 3.5 + */ +typedef struct EHCIqtd { + uint32_t next; // Standard next link pointer + uint32_t altnext; // Standard next link pointer + uint32_t token; +#define QTD_TOKEN_DTOGGLE (1 << 31) +#define QTD_TOKEN_TBYTES_MASK 0x7fff0000 +#define QTD_TOKEN_TBYTES_SH 16 +#define QTD_TOKEN_IOC (1 << 15) +#define QTD_TOKEN_CPAGE_MASK 0x00007000 +#define QTD_TOKEN_CPAGE_SH 12 +#define QTD_TOKEN_CERR_MASK 0x00000c00 +#define QTD_TOKEN_CERR_SH 10 +#define QTD_TOKEN_PID_MASK 0x00000300 +#define QTD_TOKEN_PID_SH 8 +#define QTD_TOKEN_ACTIVE (1 << 7) +#define QTD_TOKEN_HALT (1 << 6) +#define QTD_TOKEN_DBERR (1 << 5) +#define QTD_TOKEN_BABBLE (1 << 4) +#define QTD_TOKEN_XACTERR (1 << 3) +#define QTD_TOKEN_MISSEDUF (1 << 2) +#define QTD_TOKEN_SPLITXSTATE (1 << 1) +#define QTD_TOKEN_PING (1 << 0) + + uint32_t bufptr[5]; // Standard buffer pointer +#define QTD_BUFPTR_MASK 0xfffff000 +#define QTD_BUFPTR_SH 12 +} EHCIqtd; + +/* EHCI spec version 1.0 Section 3.6 + */ +typedef struct EHCIqh { + uint32_t next; // Standard next link pointer + + /* endpoint characteristics */ + uint32_t epchar; +#define QH_EPCHAR_RL_MASK 0xf0000000 +#define QH_EPCHAR_RL_SH 28 +#define QH_EPCHAR_C (1 << 27) +#define QH_EPCHAR_MPLEN_MASK 0x07FF0000 +#define QH_EPCHAR_MPLEN_SH 16 +#define QH_EPCHAR_H (1 << 15) +#define QH_EPCHAR_DTC (1 << 14) +#define QH_EPCHAR_EPS_MASK 0x00003000 +#define QH_EPCHAR_EPS_SH 12 +#define EHCI_QH_EPS_FULL 0 +#define EHCI_QH_EPS_LOW 1 +#define EHCI_QH_EPS_HIGH 2 +#define EHCI_QH_EPS_RESERVED 3 + +#define QH_EPCHAR_EP_MASK 0x00000f00 +#define QH_EPCHAR_EP_SH 8 +#define QH_EPCHAR_I (1 << 7) +#define QH_EPCHAR_DEVADDR_MASK 0x0000007f +#define QH_EPCHAR_DEVADDR_SH 0 + + /* endpoint capabilities */ + uint32_t epcap; +#define QH_EPCAP_MULT_MASK 0xc0000000 +#define QH_EPCAP_MULT_SH 30 +#define QH_EPCAP_PORTNUM_MASK 0x3f800000 +#define QH_EPCAP_PORTNUM_SH 23 +#define QH_EPCAP_HUBADDR_MASK 0x007f0000 +#define QH_EPCAP_HUBADDR_SH 16 +#define QH_EPCAP_CMASK_MASK 0x0000ff00 +#define QH_EPCAP_CMASK_SH 8 +#define QH_EPCAP_SMASK_MASK 0x000000ff +#define QH_EPCAP_SMASK_SH 0 + + uint32_t current_qtd; // Standard next link pointer + uint32_t next_qtd; // Standard next link pointer + uint32_t altnext_qtd; +#define QH_ALTNEXT_NAKCNT_MASK 0x0000001e +#define QH_ALTNEXT_NAKCNT_SH 1 + + uint32_t token; // Same as QTD token + uint32_t bufptr[5]; // Standard buffer pointer +#define BUFPTR_CPROGMASK_MASK 0x000000ff +#define BUFPTR_FRAMETAG_MASK 0x0000001f +#define BUFPTR_SBYTES_MASK 0x00000fe0 +#define BUFPTR_SBYTES_SH 5 +} EHCIqh; + +/* EHCI spec version 1.0 Section 3.7 + */ +typedef struct EHCIfstn { + uint32_t next; // Standard next link pointer + uint32_t backptr; // Standard next link pointer +} EHCIfstn; + +typedef struct EHCIQueue EHCIQueue; +typedef struct EHCIState EHCIState; + +enum async_state { + EHCI_ASYNC_NONE = 0, + EHCI_ASYNC_INFLIGHT, + EHCI_ASYNC_FINISHED, +}; + +struct EHCIQueue { + EHCIState *ehci; + QTAILQ_ENTRY(EHCIQueue) next; + uint32_t seen; + uint64_t ts; + + /* cached data from guest - needs to be flushed + * when guest removes an entry (doorbell, handshake sequence) + */ + EHCIqh qh; // copy of current QH (being worked on) + uint32_t qhaddr; // address QH read from + EHCIqtd qtd; // copy of current QTD (being worked on) + uint32_t qtdaddr; // address QTD read from + + USBPacket packet; + QEMUSGList sgl; + int pid; + uint32_t tbytes; + enum async_state async; + int usb_status; +}; + +typedef QTAILQ_HEAD(EHCIQueueHead, EHCIQueue) EHCIQueueHead; + +struct EHCIState { + PCIDevice dev; + USBBus bus; + qemu_irq irq; + MemoryRegion mem; + int companion_count; + + /* properties */ + uint32_t freq; + uint32_t maxframes; + + /* + * EHCI spec version 1.0 Section 2.3 + * Host Controller Operational Registers + */ + union { + uint8_t mmio[MMIO_SIZE]; + struct { + uint8_t cap[OPREGBASE]; + uint32_t usbcmd; + uint32_t usbsts; + uint32_t usbintr; + uint32_t frindex; + uint32_t ctrldssegment; + uint32_t periodiclistbase; + uint32_t asynclistaddr; + uint32_t notused[9]; + uint32_t configflag; + uint32_t portsc[NB_PORTS]; + }; + }; + + /* + * Internal states, shadow registers, etc + */ + uint32_t sofv; + QEMUTimer *frame_timer; + int attach_poll_counter; + int astate; // Current state in asynchronous schedule + int pstate; // Current state in periodic schedule + USBPort ports[NB_PORTS]; + USBPort *companion_ports[NB_PORTS]; + uint32_t usbsts_pending; + EHCIQueueHead aqueues; + EHCIQueueHead pqueues; + + uint32_t a_fetch_addr; // which address to look at next + uint32_t p_fetch_addr; // which address to look at next + + USBPacket ipacket; + QEMUSGList isgl; + int isoch_pause; + + uint64_t last_run_ns; +}; + +#define SET_LAST_RUN_CLOCK(s) \ + (s)->last_run_ns = qemu_get_clock_ns(vm_clock); + +/* nifty macros from Arnon's EHCI version */ +#define get_field(data, field) \ + (((data) & field##_MASK) >> field##_SH) + +#define set_field(data, newval, field) do { \ + uint32_t val = *data; \ + val &= ~ field##_MASK; \ + val |= ((newval) << field##_SH) & field##_MASK; \ + *data = val; \ + } while(0) + +static const char *ehci_state_names[] = { + [EST_INACTIVE] = "INACTIVE", + [EST_ACTIVE] = "ACTIVE", + [EST_EXECUTING] = "EXECUTING", + [EST_SLEEPING] = "SLEEPING", + [EST_WAITLISTHEAD] = "WAITLISTHEAD", + [EST_FETCHENTRY] = "FETCH ENTRY", + [EST_FETCHQH] = "FETCH QH", + [EST_FETCHITD] = "FETCH ITD", + [EST_ADVANCEQUEUE] = "ADVANCEQUEUE", + [EST_FETCHQTD] = "FETCH QTD", + [EST_EXECUTE] = "EXECUTE", + [EST_WRITEBACK] = "WRITEBACK", + [EST_HORIZONTALQH] = "HORIZONTALQH", +}; + +static const char *ehci_mmio_names[] = { + [CAPLENGTH] = "CAPLENGTH", + [HCIVERSION] = "HCIVERSION", + [HCSPARAMS] = "HCSPARAMS", + [HCCPARAMS] = "HCCPARAMS", + [USBCMD] = "USBCMD", + [USBSTS] = "USBSTS", + [USBINTR] = "USBINTR", + [FRINDEX] = "FRINDEX", + [PERIODICLISTBASE] = "P-LIST BASE", + [ASYNCLISTADDR] = "A-LIST ADDR", + [PORTSC_BEGIN] = "PORTSC #0", + [PORTSC_BEGIN + 4] = "PORTSC #1", + [PORTSC_BEGIN + 8] = "PORTSC #2", + [PORTSC_BEGIN + 12] = "PORTSC #3", + [PORTSC_BEGIN + 16] = "PORTSC #4", + [PORTSC_BEGIN + 20] = "PORTSC #5", + [CONFIGFLAG] = "CONFIGFLAG", +}; + +static const char *nr2str(const char **n, size_t len, uint32_t nr) +{ + if (nr < len && n[nr] != NULL) { + return n[nr]; + } else { + return "unknown"; + } +} + +static const char *state2str(uint32_t state) +{ + return nr2str(ehci_state_names, ARRAY_SIZE(ehci_state_names), state); +} + +static const char *addr2str(target_phys_addr_t addr) +{ + return nr2str(ehci_mmio_names, ARRAY_SIZE(ehci_mmio_names), addr); +} + +static void ehci_trace_usbsts(uint32_t mask, int state) +{ + /* interrupts */ + if (mask & USBSTS_INT) { + trace_usb_ehci_usbsts("INT", state); + } + if (mask & USBSTS_ERRINT) { + trace_usb_ehci_usbsts("ERRINT", state); + } + if (mask & USBSTS_PCD) { + trace_usb_ehci_usbsts("PCD", state); + } + if (mask & USBSTS_FLR) { + trace_usb_ehci_usbsts("FLR", state); + } + if (mask & USBSTS_HSE) { + trace_usb_ehci_usbsts("HSE", state); + } + if (mask & USBSTS_IAA) { + trace_usb_ehci_usbsts("IAA", state); + } + + /* status */ + if (mask & USBSTS_HALT) { + trace_usb_ehci_usbsts("HALT", state); + } + if (mask & USBSTS_REC) { + trace_usb_ehci_usbsts("REC", state); + } + if (mask & USBSTS_PSS) { + trace_usb_ehci_usbsts("PSS", state); + } + if (mask & USBSTS_ASS) { + trace_usb_ehci_usbsts("ASS", state); + } +} + +static inline void ehci_set_usbsts(EHCIState *s, int mask) +{ + if ((s->usbsts & mask) == mask) { + return; + } + ehci_trace_usbsts(mask, 1); + s->usbsts |= mask; +} + +static inline void ehci_clear_usbsts(EHCIState *s, int mask) +{ + if ((s->usbsts & mask) == 0) { + return; + } + ehci_trace_usbsts(mask, 0); + s->usbsts &= ~mask; +} + +static inline void ehci_set_interrupt(EHCIState *s, int intr) +{ + int level = 0; + + // TODO honour interrupt threshold requests + + ehci_set_usbsts(s, intr); + + if ((s->usbsts & USBINTR_MASK) & s->usbintr) { + level = 1; + } + + qemu_set_irq(s->irq, level); +} + +static inline void ehci_record_interrupt(EHCIState *s, int intr) +{ + s->usbsts_pending |= intr; +} + +static inline void ehci_commit_interrupt(EHCIState *s) +{ + if (!s->usbsts_pending) { + return; + } + ehci_set_interrupt(s, s->usbsts_pending); + s->usbsts_pending = 0; +} + +static void ehci_set_state(EHCIState *s, int async, int state) +{ + if (async) { + trace_usb_ehci_state("async", state2str(state)); + s->astate = state; + } else { + trace_usb_ehci_state("periodic", state2str(state)); + s->pstate = state; + } +} + +static int ehci_get_state(EHCIState *s, int async) +{ + return async ? s->astate : s->pstate; +} + +static void ehci_set_fetch_addr(EHCIState *s, int async, uint32_t addr) +{ + if (async) { + s->a_fetch_addr = addr; + } else { + s->p_fetch_addr = addr; + } +} + +static int ehci_get_fetch_addr(EHCIState *s, int async) +{ + return async ? s->a_fetch_addr : s->p_fetch_addr; +} + +static void ehci_trace_qh(EHCIQueue *q, target_phys_addr_t addr, EHCIqh *qh) +{ + /* need three here due to argument count limits */ + trace_usb_ehci_qh_ptrs(q, addr, qh->next, + qh->current_qtd, qh->next_qtd, qh->altnext_qtd); + trace_usb_ehci_qh_fields(addr, + get_field(qh->epchar, QH_EPCHAR_RL), + get_field(qh->epchar, QH_EPCHAR_MPLEN), + get_field(qh->epchar, QH_EPCHAR_EPS), + get_field(qh->epchar, QH_EPCHAR_EP), + get_field(qh->epchar, QH_EPCHAR_DEVADDR)); + trace_usb_ehci_qh_bits(addr, + (bool)(qh->epchar & QH_EPCHAR_C), + (bool)(qh->epchar & QH_EPCHAR_H), + (bool)(qh->epchar & QH_EPCHAR_DTC), + (bool)(qh->epchar & QH_EPCHAR_I)); +} + +static void ehci_trace_qtd(EHCIQueue *q, target_phys_addr_t addr, EHCIqtd *qtd) +{ + /* need three here due to argument count limits */ + trace_usb_ehci_qtd_ptrs(q, addr, qtd->next, qtd->altnext); + trace_usb_ehci_qtd_fields(addr, + get_field(qtd->token, QTD_TOKEN_TBYTES), + get_field(qtd->token, QTD_TOKEN_CPAGE), + get_field(qtd->token, QTD_TOKEN_CERR), + get_field(qtd->token, QTD_TOKEN_PID)); + trace_usb_ehci_qtd_bits(addr, + (bool)(qtd->token & QTD_TOKEN_IOC), + (bool)(qtd->token & QTD_TOKEN_ACTIVE), + (bool)(qtd->token & QTD_TOKEN_HALT), + (bool)(qtd->token & QTD_TOKEN_BABBLE), + (bool)(qtd->token & QTD_TOKEN_XACTERR)); +} + +static void ehci_trace_itd(EHCIState *s, target_phys_addr_t addr, EHCIitd *itd) +{ + trace_usb_ehci_itd(addr, itd->next, + get_field(itd->bufptr[1], ITD_BUFPTR_MAXPKT), + get_field(itd->bufptr[2], ITD_BUFPTR_MULT), + get_field(itd->bufptr[0], ITD_BUFPTR_EP), + get_field(itd->bufptr[0], ITD_BUFPTR_DEVADDR)); +} + +static void ehci_trace_sitd(EHCIState *s, target_phys_addr_t addr, + EHCIsitd *sitd) +{ + trace_usb_ehci_sitd(addr, sitd->next, + (bool)(sitd->results & SITD_RESULTS_ACTIVE)); +} + +/* queue management */ + +static EHCIQueue *ehci_alloc_queue(EHCIState *ehci, int async) +{ + EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues; + EHCIQueue *q; + + q = g_malloc0(sizeof(*q)); + q->ehci = ehci; + QTAILQ_INSERT_HEAD(head, q, next); + trace_usb_ehci_queue_action(q, "alloc"); + return q; +} + +static void ehci_free_queue(EHCIQueue *q, int async) +{ + EHCIQueueHead *head = async ? &q->ehci->aqueues : &q->ehci->pqueues; + trace_usb_ehci_queue_action(q, "free"); + if (q->async == EHCI_ASYNC_INFLIGHT) { + usb_cancel_packet(&q->packet); + } + QTAILQ_REMOVE(head, q, next); + g_free(q); +} + +static EHCIQueue *ehci_find_queue_by_qh(EHCIState *ehci, uint32_t addr, + int async) +{ + EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues; + EHCIQueue *q; + + QTAILQ_FOREACH(q, head, next) { + if (addr == q->qhaddr) { + return q; + } + } + return NULL; +} + +static void ehci_queues_rip_unused(EHCIState *ehci, int async, int flush) +{ + EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues; + EHCIQueue *q, *tmp; + + QTAILQ_FOREACH_SAFE(q, head, next, tmp) { + if (q->seen) { + q->seen = 0; + q->ts = ehci->last_run_ns; + continue; + } + if (!flush && ehci->last_run_ns < q->ts + 250000000) { + /* allow 0.25 sec idle */ + continue; + } + ehci_free_queue(q, async); + } +} + +static void ehci_queues_rip_device(EHCIState *ehci, USBDevice *dev, int async) +{ + EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues; + EHCIQueue *q, *tmp; + + QTAILQ_FOREACH_SAFE(q, head, next, tmp) { + if (!usb_packet_is_inflight(&q->packet) || + q->packet.ep->dev != dev) { + continue; + } + ehci_free_queue(q, async); + } +} + +static void ehci_queues_rip_all(EHCIState *ehci, int async) +{ + EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues; + EHCIQueue *q, *tmp; + + QTAILQ_FOREACH_SAFE(q, head, next, tmp) { + ehci_free_queue(q, async); + } +} + +/* Attach or detach a device on root hub */ + +static void ehci_attach(USBPort *port) +{ + EHCIState *s = port->opaque; + uint32_t *portsc = &s->portsc[port->index]; + + trace_usb_ehci_port_attach(port->index, port->dev->product_desc); + + if (*portsc & PORTSC_POWNER) { + USBPort *companion = s->companion_ports[port->index]; + companion->dev = port->dev; + companion->ops->attach(companion); + return; + } + + *portsc |= PORTSC_CONNECT; + *portsc |= PORTSC_CSC; + + ehci_set_interrupt(s, USBSTS_PCD); +} + +static void ehci_detach(USBPort *port) +{ + EHCIState *s = port->opaque; + uint32_t *portsc = &s->portsc[port->index]; + + trace_usb_ehci_port_detach(port->index); + + if (*portsc & PORTSC_POWNER) { + USBPort *companion = s->companion_ports[port->index]; + companion->ops->detach(companion); + companion->dev = NULL; + /* + * EHCI spec 4.2.2: "When a disconnect occurs... On the event, + * the port ownership is returned immediately to the EHCI controller." + */ + *portsc &= ~PORTSC_POWNER; + return; + } + + ehci_queues_rip_device(s, port->dev, 0); + ehci_queues_rip_device(s, port->dev, 1); + + *portsc &= ~(PORTSC_CONNECT|PORTSC_PED); + *portsc |= PORTSC_CSC; + + ehci_set_interrupt(s, USBSTS_PCD); +} + +static void ehci_child_detach(USBPort *port, USBDevice *child) +{ + EHCIState *s = port->opaque; + uint32_t portsc = s->portsc[port->index]; + + if (portsc & PORTSC_POWNER) { + USBPort *companion = s->companion_ports[port->index]; + companion->ops->child_detach(companion, child); + companion->dev = NULL; + return; + } + + ehci_queues_rip_device(s, child, 0); + ehci_queues_rip_device(s, child, 1); +} + +static void ehci_wakeup(USBPort *port) +{ + EHCIState *s = port->opaque; + uint32_t portsc = s->portsc[port->index]; + + if (portsc & PORTSC_POWNER) { + USBPort *companion = s->companion_ports[port->index]; + if (companion->ops->wakeup) { + companion->ops->wakeup(companion); + } + } +} + +static int ehci_register_companion(USBBus *bus, USBPort *ports[], + uint32_t portcount, uint32_t firstport) +{ + EHCIState *s = container_of(bus, EHCIState, bus); + uint32_t i; + + if (firstport + portcount > NB_PORTS) { + qerror_report(QERR_INVALID_PARAMETER_VALUE, "firstport", + "firstport on masterbus"); + error_printf_unless_qmp( + "firstport value of %u makes companion take ports %u - %u, which " + "is outside of the valid range of 0 - %u\n", firstport, firstport, + firstport + portcount - 1, NB_PORTS - 1); + return -1; + } + + for (i = 0; i < portcount; i++) { + if (s->companion_ports[firstport + i]) { + qerror_report(QERR_INVALID_PARAMETER_VALUE, "masterbus", + "an USB masterbus"); + error_printf_unless_qmp( + "port %u on masterbus %s already has a companion assigned\n", + firstport + i, bus->qbus.name); + return -1; + } + } + + for (i = 0; i < portcount; i++) { + s->companion_ports[firstport + i] = ports[i]; + s->ports[firstport + i].speedmask |= + USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL; + /* Ensure devs attached before the initial reset go to the companion */ + s->portsc[firstport + i] = PORTSC_POWNER; + } + + s->companion_count++; + s->mmio[0x05] = (s->companion_count << 4) | portcount; + + return 0; +} + +static USBDevice *ehci_find_device(EHCIState *ehci, uint8_t addr) +{ + USBDevice *dev; + USBPort *port; + int i; + + for (i = 0; i < NB_PORTS; i++) { + port = &ehci->ports[i]; + if (!(ehci->portsc[i] & PORTSC_PED)) { + DPRINTF("Port %d not enabled\n", i); + continue; + } + dev = usb_find_device(port, addr); + if (dev != NULL) { + return dev; + } + } + return NULL; +} + +/* 4.1 host controller initialization */ +static void ehci_reset(void *opaque) +{ + EHCIState *s = opaque; + int i; + USBDevice *devs[NB_PORTS]; + + trace_usb_ehci_reset(); + + /* + * Do the detach before touching portsc, so that it correctly gets send to + * us or to our companion based on PORTSC_POWNER before the reset. + */ + for(i = 0; i < NB_PORTS; i++) { + devs[i] = s->ports[i].dev; + if (devs[i] && devs[i]->attached) { + usb_detach(&s->ports[i]); + } + } + + memset(&s->mmio[OPREGBASE], 0x00, MMIO_SIZE - OPREGBASE); + + s->usbcmd = NB_MAXINTRATE << USBCMD_ITC_SH; + s->usbsts = USBSTS_HALT; + + s->astate = EST_INACTIVE; + s->pstate = EST_INACTIVE; + s->isoch_pause = -1; + s->attach_poll_counter = 0; + + for(i = 0; i < NB_PORTS; i++) { + if (s->companion_ports[i]) { + s->portsc[i] = PORTSC_POWNER | PORTSC_PPOWER; + } else { + s->portsc[i] = PORTSC_PPOWER; + } + if (devs[i] && devs[i]->attached) { + usb_attach(&s->ports[i]); + usb_device_reset(devs[i]); + } + } + ehci_queues_rip_all(s, 0); + ehci_queues_rip_all(s, 1); + qemu_del_timer(s->frame_timer); +} + +static uint32_t ehci_mem_readb(void *ptr, target_phys_addr_t addr) +{ + EHCIState *s = ptr; + uint32_t val; + + val = s->mmio[addr]; + + return val; +} + +static uint32_t ehci_mem_readw(void *ptr, target_phys_addr_t addr) +{ + EHCIState *s = ptr; + uint32_t val; + + val = s->mmio[addr] | (s->mmio[addr+1] << 8); + + return val; +} + +static uint32_t ehci_mem_readl(void *ptr, target_phys_addr_t addr) +{ + EHCIState *s = ptr; + uint32_t val; + + val = s->mmio[addr] | (s->mmio[addr+1] << 8) | + (s->mmio[addr+2] << 16) | (s->mmio[addr+3] << 24); + + trace_usb_ehci_mmio_readl(addr, addr2str(addr), val); + return val; +} + +static void ehci_mem_writeb(void *ptr, target_phys_addr_t addr, uint32_t val) +{ + fprintf(stderr, "EHCI doesn't handle byte writes to MMIO\n"); + exit(1); +} + +static void ehci_mem_writew(void *ptr, target_phys_addr_t addr, uint32_t val) +{ + fprintf(stderr, "EHCI doesn't handle 16-bit writes to MMIO\n"); + exit(1); +} + +static void handle_port_owner_write(EHCIState *s, int port, uint32_t owner) +{ + USBDevice *dev = s->ports[port].dev; + uint32_t *portsc = &s->portsc[port]; + uint32_t orig; + + if (s->companion_ports[port] == NULL) + return; + + owner = owner & PORTSC_POWNER; + orig = *portsc & PORTSC_POWNER; + + if (!(owner ^ orig)) { + return; + } + + if (dev && dev->attached) { + usb_detach(&s->ports[port]); + } + + *portsc &= ~PORTSC_POWNER; + *portsc |= owner; + + if (dev && dev->attached) { + usb_attach(&s->ports[port]); + } +} + +static void handle_port_status_write(EHCIState *s, int port, uint32_t val) +{ + uint32_t *portsc = &s->portsc[port]; + USBDevice *dev = s->ports[port].dev; + + /* Clear rwc bits */ + *portsc &= ~(val & PORTSC_RWC_MASK); + /* The guest may clear, but not set the PED bit */ + *portsc &= val | ~PORTSC_PED; + /* POWNER is masked out by RO_MASK as it is RO when we've no companion */ + handle_port_owner_write(s, port, val); + /* And finally apply RO_MASK */ + val &= PORTSC_RO_MASK; + + if ((val & PORTSC_PRESET) && !(*portsc & PORTSC_PRESET)) { + trace_usb_ehci_port_reset(port, 1); + } + + if (!(val & PORTSC_PRESET) &&(*portsc & PORTSC_PRESET)) { + trace_usb_ehci_port_reset(port, 0); + if (dev && dev->attached) { + usb_port_reset(&s->ports[port]); + *portsc &= ~PORTSC_CSC; + } + + /* + * Table 2.16 Set the enable bit(and enable bit change) to indicate + * to SW that this port has a high speed device attached + */ + if (dev && dev->attached && (dev->speedmask & USB_SPEED_MASK_HIGH)) { + val |= PORTSC_PED; + } + } + + *portsc &= ~PORTSC_RO_MASK; + *portsc |= val; +} + +static void ehci_mem_writel(void *ptr, target_phys_addr_t addr, uint32_t val) +{ + EHCIState *s = ptr; + uint32_t *mmio = (uint32_t *)(&s->mmio[addr]); + uint32_t old = *mmio; + int i; + + trace_usb_ehci_mmio_writel(addr, addr2str(addr), val); + + /* Only aligned reads are allowed on OHCI */ + if (addr & 3) { + fprintf(stderr, "usb-ehci: Mis-aligned write to addr 0x" + TARGET_FMT_plx "\n", addr); + return; + } + + if (addr >= PORTSC && addr < PORTSC + 4 * NB_PORTS) { + handle_port_status_write(s, (addr-PORTSC)/4, val); + trace_usb_ehci_mmio_change(addr, addr2str(addr), *mmio, old); + return; + } + + if (addr < OPREGBASE) { + fprintf(stderr, "usb-ehci: write attempt to read-only register" + TARGET_FMT_plx "\n", addr); + return; + } + + + /* Do any register specific pre-write processing here. */ + switch(addr) { + case USBCMD: + if ((val & USBCMD_RUNSTOP) && !(s->usbcmd & USBCMD_RUNSTOP)) { + qemu_mod_timer(s->frame_timer, qemu_get_clock_ns(vm_clock)); + SET_LAST_RUN_CLOCK(s); + ehci_clear_usbsts(s, USBSTS_HALT); + } + + if (!(val & USBCMD_RUNSTOP) && (s->usbcmd & USBCMD_RUNSTOP)) { + qemu_del_timer(s->frame_timer); + ehci_queues_rip_all(s, 0); + ehci_queues_rip_all(s, 1); + ehci_set_usbsts(s, USBSTS_HALT); + } + + if (val & USBCMD_HCRESET) { + ehci_reset(s); + val = s->usbcmd; + } + + /* not supporting dynamic frame list size at the moment */ + if ((val & USBCMD_FLS) && !(s->usbcmd & USBCMD_FLS)) { + fprintf(stderr, "attempt to set frame list size -- value %d\n", + val & USBCMD_FLS); + val &= ~USBCMD_FLS; + } + break; + + case USBSTS: + val &= USBSTS_RO_MASK; // bits 6 thru 31 are RO + ehci_clear_usbsts(s, val); // bits 0 thru 5 are R/WC + val = s->usbsts; + ehci_set_interrupt(s, 0); + break; + + case USBINTR: + val &= USBINTR_MASK; + break; + + case FRINDEX: + s->sofv = val >> 3; + break; + + case CONFIGFLAG: + val &= 0x1; + if (val) { + for(i = 0; i < NB_PORTS; i++) + handle_port_owner_write(s, i, 0); + } + break; + + case PERIODICLISTBASE: + if ((s->usbcmd & USBCMD_PSE) && (s->usbcmd & USBCMD_RUNSTOP)) { + fprintf(stderr, + "ehci: PERIODIC list base register set while periodic schedule\n" + " is enabled and HC is enabled\n"); + } + break; + + case ASYNCLISTADDR: + if ((s->usbcmd & USBCMD_ASE) && (s->usbcmd & USBCMD_RUNSTOP)) { + fprintf(stderr, + "ehci: ASYNC list address register set while async schedule\n" + " is enabled and HC is enabled\n"); + } + break; + } + + *mmio = val; + trace_usb_ehci_mmio_change(addr, addr2str(addr), *mmio, old); +} + + +// TODO : Put in common header file, duplication from usb-ohci.c + +/* Get an array of dwords from main memory */ +static inline int get_dwords(EHCIState *ehci, uint32_t addr, + uint32_t *buf, int num) +{ + int i; + + for(i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { + pci_dma_read(&ehci->dev, addr, buf, sizeof(*buf)); + *buf = le32_to_cpu(*buf); + } + + return 1; +} + +/* Put an array of dwords in to main memory */ +static inline int put_dwords(EHCIState *ehci, uint32_t addr, + uint32_t *buf, int num) +{ + int i; + + for(i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { + uint32_t tmp = cpu_to_le32(*buf); + pci_dma_write(&ehci->dev, addr, &tmp, sizeof(tmp)); + } + + return 1; +} + +// 4.10.2 + +static int ehci_qh_do_overlay(EHCIQueue *q) +{ + int i; + int dtoggle; + int ping; + int eps; + int reload; + + // remember values in fields to preserve in qh after overlay + + dtoggle = q->qh.token & QTD_TOKEN_DTOGGLE; + ping = q->qh.token & QTD_TOKEN_PING; + + q->qh.current_qtd = q->qtdaddr; + q->qh.next_qtd = q->qtd.next; + q->qh.altnext_qtd = q->qtd.altnext; + q->qh.token = q->qtd.token; + + + eps = get_field(q->qh.epchar, QH_EPCHAR_EPS); + if (eps == EHCI_QH_EPS_HIGH) { + q->qh.token &= ~QTD_TOKEN_PING; + q->qh.token |= ping; + } + + reload = get_field(q->qh.epchar, QH_EPCHAR_RL); + set_field(&q->qh.altnext_qtd, reload, QH_ALTNEXT_NAKCNT); + + for (i = 0; i < 5; i++) { + q->qh.bufptr[i] = q->qtd.bufptr[i]; + } + + if (!(q->qh.epchar & QH_EPCHAR_DTC)) { + // preserve QH DT bit + q->qh.token &= ~QTD_TOKEN_DTOGGLE; + q->qh.token |= dtoggle; + } + + q->qh.bufptr[1] &= ~BUFPTR_CPROGMASK_MASK; + q->qh.bufptr[2] &= ~BUFPTR_FRAMETAG_MASK; + + put_dwords(q->ehci, NLPTR_GET(q->qhaddr), (uint32_t *) &q->qh, + sizeof(EHCIqh) >> 2); + + return 0; +} + +static int ehci_init_transfer(EHCIQueue *q) +{ + uint32_t cpage, offset, bytes, plen; + dma_addr_t page; + + cpage = get_field(q->qh.token, QTD_TOKEN_CPAGE); + bytes = get_field(q->qh.token, QTD_TOKEN_TBYTES); + offset = q->qh.bufptr[0] & ~QTD_BUFPTR_MASK; + pci_dma_sglist_init(&q->sgl, &q->ehci->dev, 5); + + while (bytes > 0) { + if (cpage > 4) { + fprintf(stderr, "cpage out of range (%d)\n", cpage); + return USB_RET_PROCERR; + } + + page = q->qh.bufptr[cpage] & QTD_BUFPTR_MASK; + page += offset; + plen = bytes; + if (plen > 4096 - offset) { + plen = 4096 - offset; + offset = 0; + cpage++; + } + + qemu_sglist_add(&q->sgl, page, plen); + bytes -= plen; + } + return 0; +} + +static void ehci_finish_transfer(EHCIQueue *q, int status) +{ + uint32_t cpage, offset; + + qemu_sglist_destroy(&q->sgl); + + if (status > 0) { + /* update cpage & offset */ + cpage = get_field(q->qh.token, QTD_TOKEN_CPAGE); + offset = q->qh.bufptr[0] & ~QTD_BUFPTR_MASK; + + offset += status; + cpage += offset >> QTD_BUFPTR_SH; + offset &= ~QTD_BUFPTR_MASK; + + set_field(&q->qh.token, cpage, QTD_TOKEN_CPAGE); + q->qh.bufptr[0] &= QTD_BUFPTR_MASK; + q->qh.bufptr[0] |= offset; + } +} + +static void ehci_async_complete_packet(USBPort *port, USBPacket *packet) +{ + EHCIQueue *q; + EHCIState *s = port->opaque; + uint32_t portsc = s->portsc[port->index]; + + if (portsc & PORTSC_POWNER) { + USBPort *companion = s->companion_ports[port->index]; + companion->ops->complete(companion, packet); + return; + } + + q = container_of(packet, EHCIQueue, packet); + trace_usb_ehci_queue_action(q, "wakeup"); + assert(q->async == EHCI_ASYNC_INFLIGHT); + q->async = EHCI_ASYNC_FINISHED; + q->usb_status = packet->result; +} + +static void ehci_execute_complete(EHCIQueue *q) +{ + assert(q->async != EHCI_ASYNC_INFLIGHT); + q->async = EHCI_ASYNC_NONE; + + DPRINTF("execute_complete: qhaddr 0x%x, next %x, qtdaddr 0x%x, status %d\n", + q->qhaddr, q->qh.next, q->qtdaddr, q->usb_status); + + if (q->usb_status < 0) { + switch(q->usb_status) { + case USB_RET_IOERROR: + case USB_RET_NODEV: + q->qh.token |= (QTD_TOKEN_HALT | QTD_TOKEN_XACTERR); + set_field(&q->qh.token, 0, QTD_TOKEN_CERR); + ehci_record_interrupt(q->ehci, USBSTS_ERRINT); + break; + case USB_RET_STALL: + q->qh.token |= QTD_TOKEN_HALT; + ehci_record_interrupt(q->ehci, USBSTS_ERRINT); + break; + case USB_RET_NAK: + set_field(&q->qh.altnext_qtd, 0, QH_ALTNEXT_NAKCNT); + return; /* We're not done yet with this transaction */ + case USB_RET_BABBLE: + q->qh.token |= (QTD_TOKEN_HALT | QTD_TOKEN_BABBLE); + ehci_record_interrupt(q->ehci, USBSTS_ERRINT); + break; + default: + /* should not be triggerable */ + fprintf(stderr, "USB invalid response %d to handle\n", q->usb_status); + assert(0); + break; + } + } else if ((q->usb_status > q->tbytes) && (q->pid == USB_TOKEN_IN)) { + q->usb_status = USB_RET_BABBLE; + q->qh.token |= (QTD_TOKEN_HALT | QTD_TOKEN_BABBLE); + ehci_record_interrupt(q->ehci, USBSTS_ERRINT); + } else { + // TODO check 4.12 for splits + + if (q->tbytes && q->pid == USB_TOKEN_IN) { + q->tbytes -= q->usb_status; + } else { + q->tbytes = 0; + } + + DPRINTF("updating tbytes to %d\n", q->tbytes); + set_field(&q->qh.token, q->tbytes, QTD_TOKEN_TBYTES); + } + ehci_finish_transfer(q, q->usb_status); + usb_packet_unmap(&q->packet); + + q->qh.token ^= QTD_TOKEN_DTOGGLE; + q->qh.token &= ~QTD_TOKEN_ACTIVE; + + if (q->qh.token & QTD_TOKEN_IOC) { + ehci_record_interrupt(q->ehci, USBSTS_INT); + } +} + +// 4.10.3 + +static int ehci_execute(EHCIQueue *q) +{ + USBDevice *dev; + USBEndpoint *ep; + int ret; + int endp; + int devadr; + + if ( !(q->qh.token & QTD_TOKEN_ACTIVE)) { + fprintf(stderr, "Attempting to execute inactive QH\n"); + return USB_RET_PROCERR; + } + + q->tbytes = (q->qh.token & QTD_TOKEN_TBYTES_MASK) >> QTD_TOKEN_TBYTES_SH; + if (q->tbytes > BUFF_SIZE) { + fprintf(stderr, "Request for more bytes than allowed\n"); + return USB_RET_PROCERR; + } + + q->pid = (q->qh.token & QTD_TOKEN_PID_MASK) >> QTD_TOKEN_PID_SH; + switch(q->pid) { + case 0: q->pid = USB_TOKEN_OUT; break; + case 1: q->pid = USB_TOKEN_IN; break; + case 2: q->pid = USB_TOKEN_SETUP; break; + default: fprintf(stderr, "bad token\n"); break; + } + + if (ehci_init_transfer(q) != 0) { + return USB_RET_PROCERR; + } + + endp = get_field(q->qh.epchar, QH_EPCHAR_EP); + devadr = get_field(q->qh.epchar, QH_EPCHAR_DEVADDR); + + /* TODO: associating device with ehci port */ + dev = ehci_find_device(q->ehci, devadr); + ep = usb_ep_get(dev, q->pid, endp); + + usb_packet_setup(&q->packet, q->pid, ep); + usb_packet_map(&q->packet, &q->sgl); + + ret = usb_handle_packet(dev, &q->packet); + DPRINTF("submit: qh %x next %x qtd %x pid %x len %zd " + "(total %d) endp %x ret %d\n", + q->qhaddr, q->qh.next, q->qtdaddr, q->pid, + q->packet.iov.size, q->tbytes, endp, ret); + + if (ret > BUFF_SIZE) { + fprintf(stderr, "ret from usb_handle_packet > BUFF_SIZE\n"); + return USB_RET_PROCERR; + } + + return ret; +} + +/* 4.7.2 + */ + +static int ehci_process_itd(EHCIState *ehci, + EHCIitd *itd) +{ + USBDevice *dev; + USBEndpoint *ep; + int ret; + uint32_t i, len, pid, dir, devaddr, endp; + uint32_t pg, off, ptr1, ptr2, max, mult; + + dir =(itd->bufptr[1] & ITD_BUFPTR_DIRECTION); + devaddr = get_field(itd->bufptr[0], ITD_BUFPTR_DEVADDR); + endp = get_field(itd->bufptr[0], ITD_BUFPTR_EP); + max = get_field(itd->bufptr[1], ITD_BUFPTR_MAXPKT); + mult = get_field(itd->bufptr[2], ITD_BUFPTR_MULT); + + for(i = 0; i < 8; i++) { + if (itd->transact[i] & ITD_XACT_ACTIVE) { + pg = get_field(itd->transact[i], ITD_XACT_PGSEL); + off = itd->transact[i] & ITD_XACT_OFFSET_MASK; + ptr1 = (itd->bufptr[pg] & ITD_BUFPTR_MASK); + ptr2 = (itd->bufptr[pg+1] & ITD_BUFPTR_MASK); + len = get_field(itd->transact[i], ITD_XACT_LENGTH); + + if (len > max * mult) { + len = max * mult; + } + + if (len > BUFF_SIZE) { + return USB_RET_PROCERR; + } + + pci_dma_sglist_init(&ehci->isgl, &ehci->dev, 2); + if (off + len > 4096) { + /* transfer crosses page border */ + uint32_t len2 = off + len - 4096; + uint32_t len1 = len - len2; + qemu_sglist_add(&ehci->isgl, ptr1 + off, len1); + qemu_sglist_add(&ehci->isgl, ptr2, len2); + } else { + qemu_sglist_add(&ehci->isgl, ptr1 + off, len); + } + + pid = dir ? USB_TOKEN_IN : USB_TOKEN_OUT; + + dev = ehci_find_device(ehci, devaddr); + ep = usb_ep_get(dev, pid, endp); + if (ep->type == USB_ENDPOINT_XFER_ISOC) { + usb_packet_setup(&ehci->ipacket, pid, ep); + usb_packet_map(&ehci->ipacket, &ehci->isgl); + ret = usb_handle_packet(dev, &ehci->ipacket); + assert(ret != USB_RET_ASYNC); + usb_packet_unmap(&ehci->ipacket); + } else { + DPRINTF("ISOCH: attempt to addess non-iso endpoint\n"); + ret = USB_RET_NAK; + } + qemu_sglist_destroy(&ehci->isgl); + + if (ret < 0) { + switch (ret) { + default: + fprintf(stderr, "Unexpected iso usb result: %d\n", ret); + /* Fall through */ + case USB_RET_IOERROR: + case USB_RET_NODEV: + /* 3.3.2: XACTERR is only allowed on IN transactions */ + if (dir) { + itd->transact[i] |= ITD_XACT_XACTERR; + ehci_record_interrupt(ehci, USBSTS_ERRINT); + } + break; + case USB_RET_BABBLE: + itd->transact[i] |= ITD_XACT_BABBLE; + ehci_record_interrupt(ehci, USBSTS_ERRINT); + break; + case USB_RET_NAK: + /* no data for us, so do a zero-length transfer */ + ret = 0; + break; + } + } + if (ret >= 0) { + if (!dir) { + /* OUT */ + set_field(&itd->transact[i], len - ret, ITD_XACT_LENGTH); + } else { + /* IN */ + set_field(&itd->transact[i], ret, ITD_XACT_LENGTH); + } + } + if (itd->transact[i] & ITD_XACT_IOC) { + ehci_record_interrupt(ehci, USBSTS_INT); + } + itd->transact[i] &= ~ITD_XACT_ACTIVE; + } + } + return 0; +} + +/* This state is the entry point for asynchronous schedule + * processing. Entry here consitutes a EHCI start event state (4.8.5) + */ +static int ehci_state_waitlisthead(EHCIState *ehci, int async) +{ + EHCIqh qh; + int i = 0; + int again = 0; + uint32_t entry = ehci->asynclistaddr; + + /* set reclamation flag at start event (4.8.6) */ + if (async) { + ehci_set_usbsts(ehci, USBSTS_REC); + } + + ehci_queues_rip_unused(ehci, async, 0); + + /* Find the head of the list (4.9.1.1) */ + for(i = 0; i < MAX_QH; i++) { + get_dwords(ehci, NLPTR_GET(entry), (uint32_t *) &qh, + sizeof(EHCIqh) >> 2); + ehci_trace_qh(NULL, NLPTR_GET(entry), &qh); + + if (qh.epchar & QH_EPCHAR_H) { + if (async) { + entry |= (NLPTR_TYPE_QH << 1); + } + + ehci_set_fetch_addr(ehci, async, entry); + ehci_set_state(ehci, async, EST_FETCHENTRY); + again = 1; + goto out; + } + + entry = qh.next; + if (entry == ehci->asynclistaddr) { + break; + } + } + + /* no head found for list. */ + + ehci_set_state(ehci, async, EST_ACTIVE); + +out: + return again; +} + + +/* This state is the entry point for periodic schedule processing as + * well as being a continuation state for async processing. + */ +static int ehci_state_fetchentry(EHCIState *ehci, int async) +{ + int again = 0; + uint32_t entry = ehci_get_fetch_addr(ehci, async); + + if (NLPTR_TBIT(entry)) { + ehci_set_state(ehci, async, EST_ACTIVE); + goto out; + } + + /* section 4.8, only QH in async schedule */ + if (async && (NLPTR_TYPE_GET(entry) != NLPTR_TYPE_QH)) { + fprintf(stderr, "non queue head request in async schedule\n"); + return -1; + } + + switch (NLPTR_TYPE_GET(entry)) { + case NLPTR_TYPE_QH: + ehci_set_state(ehci, async, EST_FETCHQH); + again = 1; + break; + + case NLPTR_TYPE_ITD: + ehci_set_state(ehci, async, EST_FETCHITD); + again = 1; + break; + + case NLPTR_TYPE_STITD: + ehci_set_state(ehci, async, EST_FETCHSITD); + again = 1; + break; + + default: + /* TODO: handle FSTN type */ + fprintf(stderr, "FETCHENTRY: entry at %X is of type %d " + "which is not supported yet\n", entry, NLPTR_TYPE_GET(entry)); + return -1; + } + +out: + return again; +} + +static EHCIQueue *ehci_state_fetchqh(EHCIState *ehci, int async) +{ + uint32_t entry; + EHCIQueue *q; + + entry = ehci_get_fetch_addr(ehci, async); + q = ehci_find_queue_by_qh(ehci, entry, async); + if (NULL == q) { + q = ehci_alloc_queue(ehci, async); + } + q->qhaddr = entry; + q->seen++; + + if (q->seen > 1) { + /* we are going in circles -- stop processing */ + ehci_set_state(ehci, async, EST_ACTIVE); + q = NULL; + goto out; + } + + get_dwords(ehci, NLPTR_GET(q->qhaddr), + (uint32_t *) &q->qh, sizeof(EHCIqh) >> 2); + ehci_trace_qh(q, NLPTR_GET(q->qhaddr), &q->qh); + + if (q->async == EHCI_ASYNC_INFLIGHT) { + /* I/O still in progress -- skip queue */ + ehci_set_state(ehci, async, EST_HORIZONTALQH); + goto out; + } + if (q->async == EHCI_ASYNC_FINISHED) { + /* I/O finished -- continue processing queue */ + trace_usb_ehci_queue_action(q, "resume"); + ehci_set_state(ehci, async, EST_EXECUTING); + goto out; + } + + if (async && (q->qh.epchar & QH_EPCHAR_H)) { + + /* EHCI spec version 1.0 Section 4.8.3 & 4.10.1 */ + if (ehci->usbsts & USBSTS_REC) { + ehci_clear_usbsts(ehci, USBSTS_REC); + } else { + DPRINTF("FETCHQH: QH 0x%08x. H-bit set, reclamation status reset" + " - done processing\n", q->qhaddr); + ehci_set_state(ehci, async, EST_ACTIVE); + q = NULL; + goto out; + } + } + +#if EHCI_DEBUG + if (q->qhaddr != q->qh.next) { + DPRINTF("FETCHQH: QH 0x%08x (h %x halt %x active %x) next 0x%08x\n", + q->qhaddr, + q->qh.epchar & QH_EPCHAR_H, + q->qh.token & QTD_TOKEN_HALT, + q->qh.token & QTD_TOKEN_ACTIVE, + q->qh.next); + } +#endif + + if (q->qh.token & QTD_TOKEN_HALT) { + ehci_set_state(ehci, async, EST_HORIZONTALQH); + + } else if ((q->qh.token & QTD_TOKEN_ACTIVE) && + (NLPTR_TBIT(q->qh.current_qtd) == 0)) { + q->qtdaddr = q->qh.current_qtd; + ehci_set_state(ehci, async, EST_FETCHQTD); + + } else { + /* EHCI spec version 1.0 Section 4.10.2 */ + ehci_set_state(ehci, async, EST_ADVANCEQUEUE); + } + +out: + return q; +} + +static int ehci_state_fetchitd(EHCIState *ehci, int async) +{ + uint32_t entry; + EHCIitd itd; + + assert(!async); + entry = ehci_get_fetch_addr(ehci, async); + + get_dwords(ehci, NLPTR_GET(entry), (uint32_t *) &itd, + sizeof(EHCIitd) >> 2); + ehci_trace_itd(ehci, entry, &itd); + + if (ehci_process_itd(ehci, &itd) != 0) { + return -1; + } + + put_dwords(ehci, NLPTR_GET(entry), (uint32_t *) &itd, + sizeof(EHCIitd) >> 2); + ehci_set_fetch_addr(ehci, async, itd.next); + ehci_set_state(ehci, async, EST_FETCHENTRY); + + return 1; +} + +static int ehci_state_fetchsitd(EHCIState *ehci, int async) +{ + uint32_t entry; + EHCIsitd sitd; + + assert(!async); + entry = ehci_get_fetch_addr(ehci, async); + + get_dwords(ehci, NLPTR_GET(entry), (uint32_t *)&sitd, + sizeof(EHCIsitd) >> 2); + ehci_trace_sitd(ehci, entry, &sitd); + + if (!(sitd.results & SITD_RESULTS_ACTIVE)) { + /* siTD is not active, nothing to do */; + } else { + /* TODO: split transfers are not implemented */ + fprintf(stderr, "WARNING: Skipping active siTD\n"); + } + + ehci_set_fetch_addr(ehci, async, sitd.next); + ehci_set_state(ehci, async, EST_FETCHENTRY); + return 1; +} + +/* Section 4.10.2 - paragraph 3 */ +static int ehci_state_advqueue(EHCIQueue *q, int async) +{ +#if 0 + /* TO-DO: 4.10.2 - paragraph 2 + * if I-bit is set to 1 and QH is not active + * go to horizontal QH + */ + if (I-bit set) { + ehci_set_state(ehci, async, EST_HORIZONTALQH); + goto out; + } +#endif + + /* + * want data and alt-next qTD is valid + */ + if (((q->qh.token & QTD_TOKEN_TBYTES_MASK) != 0) && + (NLPTR_TBIT(q->qh.altnext_qtd) == 0)) { + q->qtdaddr = q->qh.altnext_qtd; + ehci_set_state(q->ehci, async, EST_FETCHQTD); + + /* + * next qTD is valid + */ + } else if (NLPTR_TBIT(q->qh.next_qtd) == 0) { + q->qtdaddr = q->qh.next_qtd; + ehci_set_state(q->ehci, async, EST_FETCHQTD); + + /* + * no valid qTD, try next QH + */ + } else { + ehci_set_state(q->ehci, async, EST_HORIZONTALQH); + } + + return 1; +} + +/* Section 4.10.2 - paragraph 4 */ +static int ehci_state_fetchqtd(EHCIQueue *q, int async) +{ + int again = 0; + + get_dwords(q->ehci, NLPTR_GET(q->qtdaddr), (uint32_t *) &q->qtd, + sizeof(EHCIqtd) >> 2); + ehci_trace_qtd(q, NLPTR_GET(q->qtdaddr), &q->qtd); + + if (q->qtd.token & QTD_TOKEN_ACTIVE) { + ehci_set_state(q->ehci, async, EST_EXECUTE); + again = 1; + } else { + ehci_set_state(q->ehci, async, EST_HORIZONTALQH); + again = 1; + } + + return again; +} + +static int ehci_state_horizqh(EHCIQueue *q, int async) +{ + int again = 0; + + if (ehci_get_fetch_addr(q->ehci, async) != q->qh.next) { + ehci_set_fetch_addr(q->ehci, async, q->qh.next); + ehci_set_state(q->ehci, async, EST_FETCHENTRY); + again = 1; + } else { + ehci_set_state(q->ehci, async, EST_ACTIVE); + } + + return again; +} + +/* + * Write the qh back to guest physical memory. This step isn't + * in the EHCI spec but we need to do it since we don't share + * physical memory with our guest VM. + * + * The first three dwords are read-only for the EHCI, so skip them + * when writing back the qh. + */ +static void ehci_flush_qh(EHCIQueue *q) +{ + uint32_t *qh = (uint32_t *) &q->qh; + uint32_t dwords = sizeof(EHCIqh) >> 2; + uint32_t addr = NLPTR_GET(q->qhaddr); + + put_dwords(q->ehci, addr + 3 * sizeof(uint32_t), qh + 3, dwords - 3); +} + +static int ehci_state_execute(EHCIQueue *q, int async) +{ + int again = 0; + + if (ehci_qh_do_overlay(q) != 0) { + return -1; + } + + // TODO verify enough time remains in the uframe as in 4.4.1.1 + // TODO write back ptr to async list when done or out of time + // TODO Windows does not seem to ever set the MULT field + + if (!async) { + int transactCtr = get_field(q->qh.epcap, QH_EPCAP_MULT); + if (!transactCtr) { + ehci_set_state(q->ehci, async, EST_HORIZONTALQH); + again = 1; + goto out; + } + } + + if (async) { + ehci_set_usbsts(q->ehci, USBSTS_REC); + } + + q->usb_status = ehci_execute(q); + if (q->usb_status == USB_RET_PROCERR) { + again = -1; + goto out; + } + if (q->usb_status == USB_RET_ASYNC) { + ehci_flush_qh(q); + trace_usb_ehci_queue_action(q, "suspend"); + q->async = EHCI_ASYNC_INFLIGHT; + ehci_set_state(q->ehci, async, EST_HORIZONTALQH); + again = 1; + goto out; + } + + ehci_set_state(q->ehci, async, EST_EXECUTING); + again = 1; + +out: + return again; +} + +static int ehci_state_executing(EHCIQueue *q, int async) +{ + int again = 0; + + ehci_execute_complete(q); + if (q->usb_status == USB_RET_ASYNC) { + goto out; + } + if (q->usb_status == USB_RET_PROCERR) { + again = -1; + goto out; + } + + // 4.10.3 + if (!async) { + int transactCtr = get_field(q->qh.epcap, QH_EPCAP_MULT); + transactCtr--; + set_field(&q->qh.epcap, transactCtr, QH_EPCAP_MULT); + // 4.10.3, bottom of page 82, should exit this state when transaction + // counter decrements to 0 + } + + /* 4.10.5 */ + if (q->usb_status == USB_RET_NAK) { + ehci_set_state(q->ehci, async, EST_HORIZONTALQH); + } else { + ehci_set_state(q->ehci, async, EST_WRITEBACK); + } + + again = 1; + +out: + ehci_flush_qh(q); + return again; +} + + +static int ehci_state_writeback(EHCIQueue *q, int async) +{ + int again = 0; + + /* Write back the QTD from the QH area */ + ehci_trace_qtd(q, NLPTR_GET(q->qtdaddr), (EHCIqtd*) &q->qh.next_qtd); + put_dwords(q->ehci, NLPTR_GET(q->qtdaddr), (uint32_t *) &q->qh.next_qtd, + sizeof(EHCIqtd) >> 2); + + /* + * EHCI specs say go horizontal here. + * + * We can also advance the queue here for performance reasons. We + * need to take care to only take that shortcut in case we've + * processed the qtd just written back without errors, i.e. halt + * bit is clear. + */ + if (q->qh.token & QTD_TOKEN_HALT) { + ehci_set_state(q->ehci, async, EST_HORIZONTALQH); + again = 1; + } else { + ehci_set_state(q->ehci, async, EST_ADVANCEQUEUE); + again = 1; + } + return again; +} + +/* + * This is the state machine that is common to both async and periodic + */ + +static void ehci_advance_state(EHCIState *ehci, + int async) +{ + EHCIQueue *q = NULL; + int again; + int iter = 0; + + do { + if (ehci_get_state(ehci, async) == EST_FETCHQH) { + iter++; + /* if we are roaming a lot of QH without executing a qTD + * something is wrong with the linked list. TO-DO: why is + * this hack needed? + */ + assert(iter < MAX_ITERATIONS); +#if 0 + if (iter > MAX_ITERATIONS) { + DPRINTF("\n*** advance_state: bailing on MAX ITERATIONS***\n"); + ehci_set_state(ehci, async, EST_ACTIVE); + break; + } +#endif + } + switch(ehci_get_state(ehci, async)) { + case EST_WAITLISTHEAD: + again = ehci_state_waitlisthead(ehci, async); + break; + + case EST_FETCHENTRY: + again = ehci_state_fetchentry(ehci, async); + break; + + case EST_FETCHQH: + q = ehci_state_fetchqh(ehci, async); + again = q ? 1 : 0; + break; + + case EST_FETCHITD: + again = ehci_state_fetchitd(ehci, async); + break; + + case EST_FETCHSITD: + again = ehci_state_fetchsitd(ehci, async); + break; + + case EST_ADVANCEQUEUE: + again = ehci_state_advqueue(q, async); + break; + + case EST_FETCHQTD: + again = ehci_state_fetchqtd(q, async); + break; + + case EST_HORIZONTALQH: + again = ehci_state_horizqh(q, async); + break; + + case EST_EXECUTE: + iter = 0; + again = ehci_state_execute(q, async); + break; + + case EST_EXECUTING: + assert(q != NULL); + again = ehci_state_executing(q, async); + break; + + case EST_WRITEBACK: + assert(q != NULL); + again = ehci_state_writeback(q, async); + break; + + default: + fprintf(stderr, "Bad state!\n"); + again = -1; + assert(0); + break; + } + + if (again < 0) { + fprintf(stderr, "processing error - resetting ehci HC\n"); + ehci_reset(ehci); + again = 0; + assert(0); + } + } + while (again); + + ehci_commit_interrupt(ehci); +} + +static void ehci_advance_async_state(EHCIState *ehci) +{ + const int async = 1; + + switch(ehci_get_state(ehci, async)) { + case EST_INACTIVE: + if (!(ehci->usbcmd & USBCMD_ASE)) { + break; + } + ehci_set_usbsts(ehci, USBSTS_ASS); + ehci_set_state(ehci, async, EST_ACTIVE); + // No break, fall through to ACTIVE + + case EST_ACTIVE: + if ( !(ehci->usbcmd & USBCMD_ASE)) { + ehci_queues_rip_all(ehci, async); + ehci_clear_usbsts(ehci, USBSTS_ASS); + ehci_set_state(ehci, async, EST_INACTIVE); + break; + } + + /* make sure guest has acknowledged the doorbell interrupt */ + /* TO-DO: is this really needed? */ + if (ehci->usbsts & USBSTS_IAA) { + DPRINTF("IAA status bit still set.\n"); + break; + } + + /* check that address register has been set */ + if (ehci->asynclistaddr == 0) { + break; + } + + ehci_set_state(ehci, async, EST_WAITLISTHEAD); + ehci_advance_state(ehci, async); + + /* If the doorbell is set, the guest wants to make a change to the + * schedule. The host controller needs to release cached data. + * (section 4.8.2) + */ + if (ehci->usbcmd & USBCMD_IAAD) { + /* Remove all unseen qhs from the async qhs queue */ + ehci_queues_rip_unused(ehci, async, 1); + DPRINTF("ASYNC: doorbell request acknowledged\n"); + ehci->usbcmd &= ~USBCMD_IAAD; + ehci_set_interrupt(ehci, USBSTS_IAA); + } + break; + + default: + /* this should only be due to a developer mistake */ + fprintf(stderr, "ehci: Bad asynchronous state %d. " + "Resetting to active\n", ehci->astate); + assert(0); + } +} + +static void ehci_advance_periodic_state(EHCIState *ehci) +{ + uint32_t entry; + uint32_t list; + const int async = 0; + + // 4.6 + + switch(ehci_get_state(ehci, async)) { + case EST_INACTIVE: + if ( !(ehci->frindex & 7) && (ehci->usbcmd & USBCMD_PSE)) { + ehci_set_usbsts(ehci, USBSTS_PSS); + ehci_set_state(ehci, async, EST_ACTIVE); + // No break, fall through to ACTIVE + } else + break; + + case EST_ACTIVE: + if ( !(ehci->frindex & 7) && !(ehci->usbcmd & USBCMD_PSE)) { + ehci_queues_rip_all(ehci, async); + ehci_clear_usbsts(ehci, USBSTS_PSS); + ehci_set_state(ehci, async, EST_INACTIVE); + break; + } + + list = ehci->periodiclistbase & 0xfffff000; + /* check that register has been set */ + if (list == 0) { + break; + } + list |= ((ehci->frindex & 0x1ff8) >> 1); + + pci_dma_read(&ehci->dev, list, &entry, sizeof entry); + entry = le32_to_cpu(entry); + + DPRINTF("PERIODIC state adv fr=%d. [%08X] -> %08X\n", + ehci->frindex / 8, list, entry); + ehci_set_fetch_addr(ehci, async,entry); + ehci_set_state(ehci, async, EST_FETCHENTRY); + ehci_advance_state(ehci, async); + ehci_queues_rip_unused(ehci, async, 0); + break; + + default: + /* this should only be due to a developer mistake */ + fprintf(stderr, "ehci: Bad periodic state %d. " + "Resetting to active\n", ehci->pstate); + assert(0); + } +} + +static void ehci_frame_timer(void *opaque) +{ + EHCIState *ehci = opaque; + int64_t expire_time, t_now; + uint64_t ns_elapsed; + int frames; + int i; + int skipped_frames = 0; + + t_now = qemu_get_clock_ns(vm_clock); + expire_time = t_now + (get_ticks_per_sec() / ehci->freq); + + ns_elapsed = t_now - ehci->last_run_ns; + frames = ns_elapsed / FRAME_TIMER_NS; + + for (i = 0; i < frames; i++) { + if ( !(ehci->usbsts & USBSTS_HALT)) { + if (ehci->isoch_pause <= 0) { + ehci->frindex += 8; + } + + if (ehci->frindex > 0x00001fff) { + ehci->frindex = 0; + ehci_set_interrupt(ehci, USBSTS_FLR); + } + + ehci->sofv = (ehci->frindex - 1) >> 3; + ehci->sofv &= 0x000003ff; + } + + if (frames - i > ehci->maxframes) { + skipped_frames++; + } else { + ehci_advance_periodic_state(ehci); + } + + ehci->last_run_ns += FRAME_TIMER_NS; + } + +#if 0 + if (skipped_frames) { + DPRINTF("WARNING - EHCI skipped %d frames\n", skipped_frames); + } +#endif + + /* Async is not inside loop since it executes everything it can once + * called + */ + ehci_advance_async_state(ehci); + + qemu_mod_timer(ehci->frame_timer, expire_time); +} + + +static const MemoryRegionOps ehci_mem_ops = { + .old_mmio = { + .read = { ehci_mem_readb, ehci_mem_readw, ehci_mem_readl }, + .write = { ehci_mem_writeb, ehci_mem_writew, ehci_mem_writel }, + }, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static int usb_ehci_initfn(PCIDevice *dev); + +static USBPortOps ehci_port_ops = { + .attach = ehci_attach, + .detach = ehci_detach, + .child_detach = ehci_child_detach, + .wakeup = ehci_wakeup, + .complete = ehci_async_complete_packet, +}; + +static USBBusOps ehci_bus_ops = { + .register_companion = ehci_register_companion, +}; + +static const VMStateDescription vmstate_ehci = { + .name = "ehci", + .unmigratable = 1, +}; + +static Property ehci_properties[] = { + DEFINE_PROP_UINT32("freq", EHCIState, freq, FRAME_TIMER_FREQ), + DEFINE_PROP_UINT32("maxframes", EHCIState, maxframes, 128), + DEFINE_PROP_END_OF_LIST(), +}; + +static void ehci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); + + k->init = usb_ehci_initfn; + k->vendor_id = PCI_VENDOR_ID_INTEL; + k->device_id = PCI_DEVICE_ID_INTEL_82801D; /* ich4 */ + k->revision = 0x10; + k->class_id = PCI_CLASS_SERIAL_USB; + dc->vmsd = &vmstate_ehci; + dc->props = ehci_properties; +} + +static TypeInfo ehci_info = { + .name = "usb-ehci", + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(EHCIState), + .class_init = ehci_class_init, +}; + +static void ich9_ehci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); + + k->init = usb_ehci_initfn; + k->vendor_id = PCI_VENDOR_ID_INTEL; + k->device_id = PCI_DEVICE_ID_INTEL_82801I_EHCI1; + k->revision = 0x03; + k->class_id = PCI_CLASS_SERIAL_USB; + dc->vmsd = &vmstate_ehci; + dc->props = ehci_properties; +} + +static TypeInfo ich9_ehci_info = { + .name = "ich9-usb-ehci1", + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(EHCIState), + .class_init = ich9_ehci_class_init, +}; + +static int usb_ehci_initfn(PCIDevice *dev) +{ + EHCIState *s = DO_UPCAST(EHCIState, dev, dev); + uint8_t *pci_conf = s->dev.config; + int i; + + pci_set_byte(&pci_conf[PCI_CLASS_PROG], 0x20); + + /* capabilities pointer */ + pci_set_byte(&pci_conf[PCI_CAPABILITY_LIST], 0x00); + //pci_set_byte(&pci_conf[PCI_CAPABILITY_LIST], 0x50); + + pci_set_byte(&pci_conf[PCI_INTERRUPT_PIN], 4); /* interrupt pin D */ + pci_set_byte(&pci_conf[PCI_MIN_GNT], 0); + pci_set_byte(&pci_conf[PCI_MAX_LAT], 0); + + // pci_conf[0x50] = 0x01; // power management caps + + pci_set_byte(&pci_conf[USB_SBRN], USB_RELEASE_2); // release number (2.1.4) + pci_set_byte(&pci_conf[0x61], 0x20); // frame length adjustment (2.1.5) + pci_set_word(&pci_conf[0x62], 0x00); // port wake up capability (2.1.6) + + pci_conf[0x64] = 0x00; + pci_conf[0x65] = 0x00; + pci_conf[0x66] = 0x00; + pci_conf[0x67] = 0x00; + pci_conf[0x68] = 0x01; + pci_conf[0x69] = 0x00; + pci_conf[0x6a] = 0x00; + pci_conf[0x6b] = 0x00; // USBLEGSUP + pci_conf[0x6c] = 0x00; + pci_conf[0x6d] = 0x00; + pci_conf[0x6e] = 0x00; + pci_conf[0x6f] = 0xc0; // USBLEFCTLSTS + + // 2.2 host controller interface version + s->mmio[0x00] = (uint8_t) OPREGBASE; + s->mmio[0x01] = 0x00; + s->mmio[0x02] = 0x00; + s->mmio[0x03] = 0x01; // HC version + s->mmio[0x04] = NB_PORTS; // Number of downstream ports + s->mmio[0x05] = 0x00; // No companion ports at present + s->mmio[0x06] = 0x00; + s->mmio[0x07] = 0x00; + s->mmio[0x08] = 0x80; // We can cache whole frame, not 64-bit capable + s->mmio[0x09] = 0x68; // EECP + s->mmio[0x0a] = 0x00; + s->mmio[0x0b] = 0x00; + + s->irq = s->dev.irq[3]; + + usb_bus_new(&s->bus, &ehci_bus_ops, &s->dev.qdev); + for(i = 0; i < NB_PORTS; i++) { + usb_register_port(&s->bus, &s->ports[i], s, i, &ehci_port_ops, + USB_SPEED_MASK_HIGH); + s->ports[i].dev = 0; + } + + s->frame_timer = qemu_new_timer_ns(vm_clock, ehci_frame_timer, s); + QTAILQ_INIT(&s->aqueues); + QTAILQ_INIT(&s->pqueues); + + qemu_register_reset(ehci_reset, s); + + memory_region_init_io(&s->mem, &ehci_mem_ops, s, "ehci", MMIO_SIZE); + pci_register_bar(&s->dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mem); + + return 0; +} + +static void ehci_register_types(void) +{ + type_register_static(&ehci_info); + type_register_static(&ich9_ehci_info); +} + +type_init(ehci_register_types) + +/* + * vim: expandtab ts=4 + */ |