diff options
Diffstat (limited to 'hw/usb/dev-hub.c')
-rw-r--r-- | hw/usb/dev-hub.c | 549 |
1 files changed, 549 insertions, 0 deletions
diff --git a/hw/usb/dev-hub.c b/hw/usb/dev-hub.c new file mode 100644 index 0000000000..eb4e711207 --- /dev/null +++ b/hw/usb/dev-hub.c @@ -0,0 +1,549 @@ +/* + * QEMU USB HUB emulation + * + * Copyright (c) 2005 Fabrice Bellard + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#include "qemu-common.h" +#include "hw/usb.h" +#include "hw/usb/desc.h" + +//#define DEBUG + +#define NUM_PORTS 8 + +typedef struct USBHubPort { + USBPort port; + uint16_t wPortStatus; + uint16_t wPortChange; +} USBHubPort; + +typedef struct USBHubState { + USBDevice dev; + USBEndpoint *intr; + USBHubPort ports[NUM_PORTS]; +} USBHubState; + +#define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE) +#define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE) +#define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR) +#define GetHubStatus (0xa000 | USB_REQ_GET_STATUS) +#define GetPortStatus (0xa300 | USB_REQ_GET_STATUS) +#define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE) +#define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE) + +#define PORT_STAT_CONNECTION 0x0001 +#define PORT_STAT_ENABLE 0x0002 +#define PORT_STAT_SUSPEND 0x0004 +#define PORT_STAT_OVERCURRENT 0x0008 +#define PORT_STAT_RESET 0x0010 +#define PORT_STAT_POWER 0x0100 +#define PORT_STAT_LOW_SPEED 0x0200 +#define PORT_STAT_HIGH_SPEED 0x0400 +#define PORT_STAT_TEST 0x0800 +#define PORT_STAT_INDICATOR 0x1000 + +#define PORT_STAT_C_CONNECTION 0x0001 +#define PORT_STAT_C_ENABLE 0x0002 +#define PORT_STAT_C_SUSPEND 0x0004 +#define PORT_STAT_C_OVERCURRENT 0x0008 +#define PORT_STAT_C_RESET 0x0010 + +#define PORT_CONNECTION 0 +#define PORT_ENABLE 1 +#define PORT_SUSPEND 2 +#define PORT_OVERCURRENT 3 +#define PORT_RESET 4 +#define PORT_POWER 8 +#define PORT_LOWSPEED 9 +#define PORT_HIGHSPEED 10 +#define PORT_C_CONNECTION 16 +#define PORT_C_ENABLE 17 +#define PORT_C_SUSPEND 18 +#define PORT_C_OVERCURRENT 19 +#define PORT_C_RESET 20 +#define PORT_TEST 21 +#define PORT_INDICATOR 22 + +/* same as Linux kernel root hubs */ + +enum { + STR_MANUFACTURER = 1, + STR_PRODUCT, + STR_SERIALNUMBER, +}; + +static const USBDescStrings desc_strings = { + [STR_MANUFACTURER] = "QEMU " QEMU_VERSION, + [STR_PRODUCT] = "QEMU USB Hub", + [STR_SERIALNUMBER] = "314159", +}; + +static const USBDescIface desc_iface_hub = { + .bInterfaceNumber = 0, + .bNumEndpoints = 1, + .bInterfaceClass = USB_CLASS_HUB, + .eps = (USBDescEndpoint[]) { + { + .bEndpointAddress = USB_DIR_IN | 0x01, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = 1 + (NUM_PORTS + 7) / 8, + .bInterval = 0xff, + }, + } +}; + +static const USBDescDevice desc_device_hub = { + .bcdUSB = 0x0110, + .bDeviceClass = USB_CLASS_HUB, + .bMaxPacketSize0 = 8, + .bNumConfigurations = 1, + .confs = (USBDescConfig[]) { + { + .bNumInterfaces = 1, + .bConfigurationValue = 1, + .bmAttributes = 0xe0, + .nif = 1, + .ifs = &desc_iface_hub, + }, + }, +}; + +static const USBDesc desc_hub = { + .id = { + .idVendor = 0x0409, + .idProduct = 0x55aa, + .bcdDevice = 0x0101, + .iManufacturer = STR_MANUFACTURER, + .iProduct = STR_PRODUCT, + .iSerialNumber = STR_SERIALNUMBER, + }, + .full = &desc_device_hub, + .str = desc_strings, +}; + +static const uint8_t qemu_hub_hub_descriptor[] = +{ + 0x00, /* u8 bLength; patched in later */ + 0x29, /* u8 bDescriptorType; Hub-descriptor */ + 0x00, /* u8 bNbrPorts; (patched later) */ + 0x0a, /* u16 wHubCharacteristics; */ + 0x00, /* (per-port OC, no power switching) */ + 0x01, /* u8 bPwrOn2pwrGood; 2ms */ + 0x00 /* u8 bHubContrCurrent; 0 mA */ + + /* DeviceRemovable and PortPwrCtrlMask patched in later */ +}; + +static void usb_hub_attach(USBPort *port1) +{ + USBHubState *s = port1->opaque; + USBHubPort *port = &s->ports[port1->index]; + + port->wPortStatus |= PORT_STAT_CONNECTION; + port->wPortChange |= PORT_STAT_C_CONNECTION; + if (port->port.dev->speed == USB_SPEED_LOW) { + port->wPortStatus |= PORT_STAT_LOW_SPEED; + } else { + port->wPortStatus &= ~PORT_STAT_LOW_SPEED; + } + usb_wakeup(s->intr); +} + +static void usb_hub_detach(USBPort *port1) +{ + USBHubState *s = port1->opaque; + USBHubPort *port = &s->ports[port1->index]; + + usb_wakeup(s->intr); + + /* Let upstream know the device on this port is gone */ + s->dev.port->ops->child_detach(s->dev.port, port1->dev); + + port->wPortStatus &= ~PORT_STAT_CONNECTION; + port->wPortChange |= PORT_STAT_C_CONNECTION; + if (port->wPortStatus & PORT_STAT_ENABLE) { + port->wPortStatus &= ~PORT_STAT_ENABLE; + port->wPortChange |= PORT_STAT_C_ENABLE; + } +} + +static void usb_hub_child_detach(USBPort *port1, USBDevice *child) +{ + USBHubState *s = port1->opaque; + + /* Pass along upstream */ + s->dev.port->ops->child_detach(s->dev.port, child); +} + +static void usb_hub_wakeup(USBPort *port1) +{ + USBHubState *s = port1->opaque; + USBHubPort *port = &s->ports[port1->index]; + + if (port->wPortStatus & PORT_STAT_SUSPEND) { + port->wPortChange |= PORT_STAT_C_SUSPEND; + usb_wakeup(s->intr); + } +} + +static void usb_hub_complete(USBPort *port, USBPacket *packet) +{ + USBHubState *s = port->opaque; + + /* + * Just pass it along upstream for now. + * + * If we ever implement usb 2.0 split transactions this will + * become a little more complicated ... + * + * Can't use usb_packet_complete() here because packet->owner is + * cleared already, go call the ->complete() callback directly + * instead. + */ + s->dev.port->ops->complete(s->dev.port, packet); +} + +static USBDevice *usb_hub_find_device(USBDevice *dev, uint8_t addr) +{ + USBHubState *s = DO_UPCAST(USBHubState, dev, dev); + USBHubPort *port; + USBDevice *downstream; + int i; + + for (i = 0; i < NUM_PORTS; i++) { + port = &s->ports[i]; + if (!(port->wPortStatus & PORT_STAT_ENABLE)) { + continue; + } + downstream = usb_find_device(&port->port, addr); + if (downstream != NULL) { + return downstream; + } + } + return NULL; +} + +static void usb_hub_handle_reset(USBDevice *dev) +{ + USBHubState *s = DO_UPCAST(USBHubState, dev, dev); + USBHubPort *port; + int i; + + for (i = 0; i < NUM_PORTS; i++) { + port = s->ports + i; + port->wPortStatus = PORT_STAT_POWER; + port->wPortChange = 0; + if (port->port.dev && port->port.dev->attached) { + port->wPortStatus |= PORT_STAT_CONNECTION; + port->wPortChange |= PORT_STAT_C_CONNECTION; + if (port->port.dev->speed == USB_SPEED_LOW) { + port->wPortStatus |= PORT_STAT_LOW_SPEED; + } + } + } +} + +static int usb_hub_handle_control(USBDevice *dev, USBPacket *p, + int request, int value, int index, int length, uint8_t *data) +{ + USBHubState *s = (USBHubState *)dev; + int ret; + + ret = usb_desc_handle_control(dev, p, request, value, index, length, data); + if (ret >= 0) { + return ret; + } + + switch(request) { + case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: + if (value == 0 && index != 0x81) { /* clear ep halt */ + goto fail; + } + ret = 0; + break; + /* usb specific requests */ + case GetHubStatus: + data[0] = 0; + data[1] = 0; + data[2] = 0; + data[3] = 0; + ret = 4; + break; + case GetPortStatus: + { + unsigned int n = index - 1; + USBHubPort *port; + if (n >= NUM_PORTS) { + goto fail; + } + port = &s->ports[n]; + data[0] = port->wPortStatus; + data[1] = port->wPortStatus >> 8; + data[2] = port->wPortChange; + data[3] = port->wPortChange >> 8; + ret = 4; + } + break; + case SetHubFeature: + case ClearHubFeature: + if (value == 0 || value == 1) { + } else { + goto fail; + } + ret = 0; + break; + case SetPortFeature: + { + unsigned int n = index - 1; + USBHubPort *port; + USBDevice *dev; + if (n >= NUM_PORTS) { + goto fail; + } + port = &s->ports[n]; + dev = port->port.dev; + switch(value) { + case PORT_SUSPEND: + port->wPortStatus |= PORT_STAT_SUSPEND; + break; + case PORT_RESET: + if (dev && dev->attached) { + usb_device_reset(dev); + port->wPortChange |= PORT_STAT_C_RESET; + /* set enable bit */ + port->wPortStatus |= PORT_STAT_ENABLE; + } + break; + case PORT_POWER: + break; + default: + goto fail; + } + ret = 0; + } + break; + case ClearPortFeature: + { + unsigned int n = index - 1; + USBHubPort *port; + + if (n >= NUM_PORTS) { + goto fail; + } + port = &s->ports[n]; + switch(value) { + case PORT_ENABLE: + port->wPortStatus &= ~PORT_STAT_ENABLE; + break; + case PORT_C_ENABLE: + port->wPortChange &= ~PORT_STAT_C_ENABLE; + break; + case PORT_SUSPEND: + port->wPortStatus &= ~PORT_STAT_SUSPEND; + break; + case PORT_C_SUSPEND: + port->wPortChange &= ~PORT_STAT_C_SUSPEND; + break; + case PORT_C_CONNECTION: + port->wPortChange &= ~PORT_STAT_C_CONNECTION; + break; + case PORT_C_OVERCURRENT: + port->wPortChange &= ~PORT_STAT_C_OVERCURRENT; + break; + case PORT_C_RESET: + port->wPortChange &= ~PORT_STAT_C_RESET; + break; + default: + goto fail; + } + ret = 0; + } + break; + case GetHubDescriptor: + { + unsigned int n, limit, var_hub_size = 0; + memcpy(data, qemu_hub_hub_descriptor, + sizeof(qemu_hub_hub_descriptor)); + data[2] = NUM_PORTS; + + /* fill DeviceRemovable bits */ + limit = ((NUM_PORTS + 1 + 7) / 8) + 7; + for (n = 7; n < limit; n++) { + data[n] = 0x00; + var_hub_size++; + } + + /* fill PortPwrCtrlMask bits */ + limit = limit + ((NUM_PORTS + 7) / 8); + for (;n < limit; n++) { + data[n] = 0xff; + var_hub_size++; + } + + ret = sizeof(qemu_hub_hub_descriptor) + var_hub_size; + data[0] = ret; + break; + } + default: + fail: + ret = USB_RET_STALL; + break; + } + return ret; +} + +static int usb_hub_handle_data(USBDevice *dev, USBPacket *p) +{ + USBHubState *s = (USBHubState *)dev; + int ret; + + switch(p->pid) { + case USB_TOKEN_IN: + if (p->ep->nr == 1) { + USBHubPort *port; + unsigned int status; + uint8_t buf[4]; + int i, n; + n = (NUM_PORTS + 1 + 7) / 8; + if (p->iov.size == 1) { /* FreeBSD workaround */ + n = 1; + } else if (n > p->iov.size) { + return USB_RET_BABBLE; + } + status = 0; + for(i = 0; i < NUM_PORTS; i++) { + port = &s->ports[i]; + if (port->wPortChange) + status |= (1 << (i + 1)); + } + if (status != 0) { + for(i = 0; i < n; i++) { + buf[i] = status >> (8 * i); + } + usb_packet_copy(p, buf, n); + ret = n; + } else { + ret = USB_RET_NAK; /* usb11 11.13.1 */ + } + } else { + goto fail; + } + break; + case USB_TOKEN_OUT: + default: + fail: + ret = USB_RET_STALL; + break; + } + return ret; +} + +static void usb_hub_handle_destroy(USBDevice *dev) +{ + USBHubState *s = (USBHubState *)dev; + int i; + + for (i = 0; i < NUM_PORTS; i++) { + usb_unregister_port(usb_bus_from_device(dev), + &s->ports[i].port); + } +} + +static USBPortOps usb_hub_port_ops = { + .attach = usb_hub_attach, + .detach = usb_hub_detach, + .child_detach = usb_hub_child_detach, + .wakeup = usb_hub_wakeup, + .complete = usb_hub_complete, +}; + +static int usb_hub_initfn(USBDevice *dev) +{ + USBHubState *s = DO_UPCAST(USBHubState, dev, dev); + USBHubPort *port; + int i; + + usb_desc_init(dev); + s->intr = usb_ep_get(dev, USB_TOKEN_IN, 1); + for (i = 0; i < NUM_PORTS; i++) { + port = &s->ports[i]; + usb_register_port(usb_bus_from_device(dev), + &port->port, s, i, &usb_hub_port_ops, + USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL); + usb_port_location(&port->port, dev->port, i+1); + } + usb_hub_handle_reset(dev); + return 0; +} + +static const VMStateDescription vmstate_usb_hub_port = { + .name = "usb-hub-port", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField []) { + VMSTATE_UINT16(wPortStatus, USBHubPort), + VMSTATE_UINT16(wPortChange, USBHubPort), + VMSTATE_END_OF_LIST() + } +}; + +static const VMStateDescription vmstate_usb_hub = { + .name = "usb-hub", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField []) { + VMSTATE_USB_DEVICE(dev, USBHubState), + VMSTATE_STRUCT_ARRAY(ports, USBHubState, NUM_PORTS, 0, + vmstate_usb_hub_port, USBHubPort), + VMSTATE_END_OF_LIST() + } +}; + +static void usb_hub_class_initfn(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + USBDeviceClass *uc = USB_DEVICE_CLASS(klass); + + uc->init = usb_hub_initfn; + uc->product_desc = "QEMU USB Hub"; + uc->usb_desc = &desc_hub; + uc->find_device = usb_hub_find_device; + uc->handle_reset = usb_hub_handle_reset; + uc->handle_control = usb_hub_handle_control; + uc->handle_data = usb_hub_handle_data; + uc->handle_destroy = usb_hub_handle_destroy; + dc->fw_name = "hub"; + dc->vmsd = &vmstate_usb_hub; +} + +static TypeInfo hub_info = { + .name = "usb-hub", + .parent = TYPE_USB_DEVICE, + .instance_size = sizeof(USBHubState), + .class_init = usb_hub_class_initfn, +}; + +static void usb_hub_register_types(void) +{ + type_register_static(&hub_info); +} + +type_init(usb_hub_register_types) |