diff options
Diffstat (limited to 'hw/usb-serial.c')
-rw-r--r-- | hw/usb-serial.c | 200 |
1 files changed, 83 insertions, 117 deletions
diff --git a/hw/usb-serial.c b/hw/usb-serial.c index c19580f305..f89eb9b3a3 100644 --- a/hw/usb-serial.c +++ b/hw/usb-serial.c @@ -11,6 +11,7 @@ #include "qemu-common.h" #include "qemu-error.h" #include "usb.h" +#include "usb-desc.h" #include "qemu-char.h" //#define DEBUG_Serial @@ -91,8 +92,6 @@ do { printf("usb-serial: " fmt , ## __VA_ARGS__); } while (0) typedef struct { USBDevice dev; - uint32_t vendorid; - uint32_t productid; uint8_t recv_buf[RECV_BUF]; uint16_t recv_ptr; uint16_t recv_used; @@ -104,69 +103,78 @@ typedef struct { CharDriverState *cs; } USBSerialState; -static const uint8_t qemu_serial_dev_descriptor[] = { - 0x12, /* u8 bLength; */ - 0x01, /* u8 bDescriptorType; Device */ - 0x00, 0x02, /* u16 bcdUSB; v2.0 */ - - 0x00, /* u8 bDeviceClass; */ - 0x00, /* u8 bDeviceSubClass; */ - 0x00, /* u8 bDeviceProtocol; [ low/full speeds only ] */ - 0x08, /* u8 bMaxPacketSize0; 8 Bytes */ - - /* Vendor and product id are arbitrary. */ - 0x03, 0x04, /* u16 idVendor; */ - 0x00, 0xFF, /* u16 idProduct; */ - 0x00, 0x04, /* u16 bcdDevice */ - - 0x01, /* u8 iManufacturer; */ - 0x02, /* u8 iProduct; */ - 0x03, /* u8 iSerialNumber; */ - 0x01 /* u8 bNumConfigurations; */ +enum { + STR_MANUFACTURER = 1, + STR_PRODUCT_SERIAL, + STR_PRODUCT_BRAILLE, + STR_SERIALNUMBER, }; -static const uint8_t qemu_serial_config_descriptor[] = { - - /* one configuration */ - 0x09, /* u8 bLength; */ - 0x02, /* u8 bDescriptorType; Configuration */ - 0x20, 0x00, /* u16 wTotalLength; */ - 0x01, /* u8 bNumInterfaces; (1) */ - 0x01, /* u8 bConfigurationValue; */ - 0x00, /* u8 iConfiguration; */ - 0x80, /* u8 bmAttributes; - Bit 7: must be set, - 6: Self-powered, - 5: Remote wakeup, - 4..0: resvd */ - 100/2, /* u8 MaxPower; */ - - /* one interface */ - 0x09, /* u8 if_bLength; */ - 0x04, /* u8 if_bDescriptorType; Interface */ - 0x00, /* u8 if_bInterfaceNumber; */ - 0x00, /* u8 if_bAlternateSetting; */ - 0x02, /* u8 if_bNumEndpoints; */ - 0xff, /* u8 if_bInterfaceClass; Vendor Specific */ - 0xff, /* u8 if_bInterfaceSubClass; Vendor Specific */ - 0xff, /* u8 if_bInterfaceProtocol; Vendor Specific */ - 0x02, /* u8 if_iInterface; */ - - /* Bulk-In endpoint */ - 0x07, /* u8 ep_bLength; */ - 0x05, /* u8 ep_bDescriptorType; Endpoint */ - 0x81, /* u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x02, /* u8 ep_bmAttributes; Bulk */ - 0x40, 0x00, /* u16 ep_wMaxPacketSize; */ - 0x00, /* u8 ep_bInterval; */ - - /* Bulk-Out endpoint */ - 0x07, /* u8 ep_bLength; */ - 0x05, /* u8 ep_bDescriptorType; Endpoint */ - 0x02, /* u8 ep_bEndpointAddress; OUT Endpoint 2 */ - 0x02, /* u8 ep_bmAttributes; Bulk */ - 0x40, 0x00, /* u16 ep_wMaxPacketSize; */ - 0x00 /* u8 ep_bInterval; */ +static const USBDescStrings desc_strings = { + [STR_MANUFACTURER] = "QEMU " QEMU_VERSION, + [STR_PRODUCT_SERIAL] = "QEMU USB SERIAL", + [STR_PRODUCT_BRAILLE] = "QEMU USB BRAILLE", + [STR_SERIALNUMBER] = "1", +}; + +static const USBDescIface desc_iface0 = { + .bInterfaceNumber = 0, + .bNumEndpoints = 2, + .bInterfaceClass = 0xff, + .bInterfaceSubClass = 0xff, + .bInterfaceProtocol = 0xff, + .eps = (USBDescEndpoint[]) { + { + .bEndpointAddress = USB_DIR_IN | 0x01, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = 64, + },{ + .bEndpointAddress = USB_DIR_OUT | 0x02, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = 64, + }, + } +}; + +static const USBDescDevice desc_device = { + .bcdUSB = 0x0200, + .bMaxPacketSize0 = 8, + .bNumConfigurations = 1, + .confs = (USBDescConfig[]) { + { + .bNumInterfaces = 1, + .bConfigurationValue = 1, + .bmAttributes = 0x80, + .bMaxPower = 50, + .ifs = &desc_iface0, + }, + }, +}; + +static const USBDesc desc_serial = { + .id = { + .idVendor = 0x0403, + .idProduct = 0x6001, + .bcdDevice = 0x0400, + .iManufacturer = STR_MANUFACTURER, + .iProduct = STR_PRODUCT_SERIAL, + .iSerialNumber = STR_SERIALNUMBER, + }, + .full = &desc_device, + .str = desc_strings, +}; + +static const USBDesc desc_braille = { + .id = { + .idVendor = 0x0403, + .idProduct = 0xfe72, + .bcdDevice = 0x0400, + .iManufacturer = STR_MANUFACTURER, + .iProduct = STR_PRODUCT_BRAILLE, + .iSerialNumber = STR_SERIALNUMBER, + }, + .full = &desc_device, + .str = desc_strings, }; static void usb_serial_reset(USBSerialState *s) @@ -214,9 +222,15 @@ static int usb_serial_handle_control(USBDevice *dev, int request, int value, int index, int length, uint8_t *data) { USBSerialState *s = (USBSerialState *)dev; - int ret = 0; + int ret; + + DPRINTF("got control %x, value %x\n",request, value); + ret = usb_desc_handle_control(dev, request, value, index, length, data); + if (ret >= 0) { + return ret; + } - //DPRINTF("got control %x, value %x\n",request, value); + ret = 0; switch (request) { case DeviceRequest | USB_REQ_GET_STATUS: data[0] = (0 << USB_DEVICE_SELF_POWERED) | @@ -244,52 +258,6 @@ static int usb_serial_handle_control(USBDevice *dev, int request, int value, dev->addr = value; ret = 0; break; - case DeviceRequest | USB_REQ_GET_DESCRIPTOR: - switch(value >> 8) { - case USB_DT_DEVICE: - memcpy(data, qemu_serial_dev_descriptor, - sizeof(qemu_serial_dev_descriptor)); - data[8] = s->vendorid & 0xff; - data[9] = ((s->vendorid) >> 8) & 0xff; - data[10] = s->productid & 0xff; - data[11] = ((s->productid) >> 8) & 0xff; - ret = sizeof(qemu_serial_dev_descriptor); - break; - case USB_DT_CONFIG: - memcpy(data, qemu_serial_config_descriptor, - sizeof(qemu_serial_config_descriptor)); - ret = sizeof(qemu_serial_config_descriptor); - break; - case USB_DT_STRING: - switch(value & 0xff) { - case 0: - /* language ids */ - data[0] = 4; - data[1] = 3; - data[2] = 0x09; - data[3] = 0x04; - ret = 4; - break; - case 1: - /* vendor description */ - ret = set_usb_string(data, "QEMU " QEMU_VERSION); - break; - case 2: - /* product description */ - ret = set_usb_string(data, "QEMU USB SERIAL"); - break; - case 3: - /* serial number */ - ret = set_usb_string(data, "1"); - break; - default: - goto fail; - } - break; - default: - goto fail; - } - break; case DeviceRequest | USB_REQ_GET_CONFIGURATION: data[0] = 1; ret = 1; @@ -633,6 +601,7 @@ static struct USBDeviceInfo serial_info = { .product_desc = "QEMU USB Serial", .qdev.name = "usb-serial", .qdev.size = sizeof(USBSerialState), + .usb_desc = &desc_serial, .init = usb_serial_initfn, .handle_packet = usb_generic_handle_packet, .handle_reset = usb_serial_handle_reset, @@ -642,9 +611,7 @@ static struct USBDeviceInfo serial_info = { .usbdevice_name = "serial", .usbdevice_init = usb_serial_init, .qdev.props = (Property[]) { - DEFINE_PROP_CHR("chardev", USBSerialState, cs), - DEFINE_PROP_HEX32("vendorid", USBSerialState, vendorid, 0x0403), - DEFINE_PROP_HEX32("productid", USBSerialState, productid, 0x6001), + DEFINE_PROP_CHR("chardev", USBSerialState, cs), DEFINE_PROP_END_OF_LIST(), }, }; @@ -653,6 +620,7 @@ static struct USBDeviceInfo braille_info = { .product_desc = "QEMU USB Braille", .qdev.name = "usb-braille", .qdev.size = sizeof(USBSerialState), + .usb_desc = &desc_braille, .init = usb_serial_initfn, .handle_packet = usb_generic_handle_packet, .handle_reset = usb_serial_handle_reset, @@ -662,9 +630,7 @@ static struct USBDeviceInfo braille_info = { .usbdevice_name = "braille", .usbdevice_init = usb_braille_init, .qdev.props = (Property[]) { - DEFINE_PROP_CHR("chardev", USBSerialState, cs), - DEFINE_PROP_HEX32("vendorid", USBSerialState, vendorid, 0x0403), - DEFINE_PROP_HEX32("productid", USBSerialState, productid, 0xfe72), + DEFINE_PROP_CHR("chardev", USBSerialState, cs), DEFINE_PROP_END_OF_LIST(), }, }; |