diff options
Diffstat (limited to 'hw/ssi/aspeed_smc.c')
| -rw-r--r-- | hw/ssi/aspeed_smc.c | 326 |
1 files changed, 326 insertions, 0 deletions
diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c new file mode 100644 index 0000000000..537635e18d --- /dev/null +++ b/hw/ssi/aspeed_smc.c @@ -0,0 +1,326 @@ +/* + * ASPEED AST2400 SMC Controller (SPI Flash Only) + * + * Copyright (C) 2016 IBM Corp. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "sysemu/sysemu.h" +#include "qemu/log.h" +#include "include/qemu/error-report.h" +#include "exec/address-spaces.h" + +#include "hw/ssi/aspeed_smc.h" + +/* CE Type Setting Register */ +#define R_CONF (0x00 / 4) +#define CONF_LEGACY_DISABLE (1 << 31) +#define CONF_ENABLE_W4 20 +#define CONF_ENABLE_W3 19 +#define CONF_ENABLE_W2 18 +#define CONF_ENABLE_W1 17 +#define CONF_ENABLE_W0 16 +#define CONF_FLASH_TYPE4 9 +#define CONF_FLASH_TYPE3 7 +#define CONF_FLASH_TYPE2 5 +#define CONF_FLASH_TYPE1 3 +#define CONF_FLASH_TYPE0 1 + +/* CE Control Register */ +#define R_CE_CTRL (0x04 / 4) +#define CTRL_EXTENDED4 4 /* 32 bit addressing for SPI */ +#define CTRL_EXTENDED3 3 /* 32 bit addressing for SPI */ +#define CTRL_EXTENDED2 2 /* 32 bit addressing for SPI */ +#define CTRL_EXTENDED1 1 /* 32 bit addressing for SPI */ +#define CTRL_EXTENDED0 0 /* 32 bit addressing for SPI */ + +/* Interrupt Control and Status Register */ +#define R_INTR_CTRL (0x08 / 4) +#define INTR_CTRL_DMA_STATUS (1 << 11) +#define INTR_CTRL_CMD_ABORT_STATUS (1 << 10) +#define INTR_CTRL_WRITE_PROTECT_STATUS (1 << 9) +#define INTR_CTRL_DMA_EN (1 << 3) +#define INTR_CTRL_CMD_ABORT_EN (1 << 2) +#define INTR_CTRL_WRITE_PROTECT_EN (1 << 1) + +/* CEx Control Register */ +#define R_CTRL0 (0x10 / 4) +#define CTRL_CMD_SHIFT 16 +#define CTRL_CMD_MASK 0xff +#define CTRL_CE_STOP_ACTIVE (1 << 2) +#define CTRL_CMD_MODE_MASK 0x3 +#define CTRL_READMODE 0x0 +#define CTRL_FREADMODE 0x1 +#define CTRL_WRITEMODE 0x2 +#define CTRL_USERMODE 0x3 +#define R_CTRL1 (0x14 / 4) +#define R_CTRL2 (0x18 / 4) +#define R_CTRL3 (0x1C / 4) +#define R_CTRL4 (0x20 / 4) + +/* CEx Segment Address Register */ +#define R_SEG_ADDR0 (0x30 / 4) +#define SEG_SIZE_SHIFT 24 /* 8MB units */ +#define SEG_SIZE_MASK 0x7f +#define SEG_START_SHIFT 16 /* address bit [A29-A23] */ +#define SEG_START_MASK 0x7f +#define R_SEG_ADDR1 (0x34 / 4) +#define R_SEG_ADDR2 (0x38 / 4) +#define R_SEG_ADDR3 (0x3C / 4) +#define R_SEG_ADDR4 (0x40 / 4) + +/* Misc Control Register #1 */ +#define R_MISC_CTRL1 (0x50 / 4) + +/* Misc Control Register #2 */ +#define R_MISC_CTRL2 (0x54 / 4) + +/* DMA Control/Status Register */ +#define R_DMA_CTRL (0x80 / 4) +#define DMA_CTRL_DELAY_MASK 0xf +#define DMA_CTRL_DELAY_SHIFT 8 +#define DMA_CTRL_FREQ_MASK 0xf +#define DMA_CTRL_FREQ_SHIFT 4 +#define DMA_CTRL_MODE (1 << 3) +#define DMA_CTRL_CKSUM (1 << 2) +#define DMA_CTRL_DIR (1 << 1) +#define DMA_CTRL_EN (1 << 0) + +/* DMA Flash Side Address */ +#define R_DMA_FLASH_ADDR (0x84 / 4) + +/* DMA DRAM Side Address */ +#define R_DMA_DRAM_ADDR (0x88 / 4) + +/* DMA Length Register */ +#define R_DMA_LEN (0x8C / 4) + +/* Checksum Calculation Result */ +#define R_DMA_CHECKSUM (0x90 / 4) + +/* Misc Control Register #2 */ +#define R_TIMINGS (0x94 / 4) + +/* SPI controller registers and bits */ +#define R_SPI_CONF (0x00 / 4) +#define SPI_CONF_ENABLE_W0 0 +#define R_SPI_CTRL0 (0x4 / 4) +#define R_SPI_MISC_CTRL (0x10 / 4) +#define R_SPI_TIMINGS (0x14 / 4) + +static const AspeedSMCController controllers[] = { + { "aspeed.smc.smc", R_CONF, R_CE_CTRL, R_CTRL0, R_TIMINGS, + CONF_ENABLE_W0, 5 }, + { "aspeed.smc.fmc", R_CONF, R_CE_CTRL, R_CTRL0, R_TIMINGS, + CONF_ENABLE_W0, 5 }, + { "aspeed.smc.spi", R_SPI_CONF, 0xff, R_SPI_CTRL0, R_SPI_TIMINGS, + SPI_CONF_ENABLE_W0, 1 }, +}; + +static bool aspeed_smc_is_ce_stop_active(const AspeedSMCState *s, int cs) +{ + return s->regs[s->r_ctrl0 + cs] & CTRL_CE_STOP_ACTIVE; +} + +static void aspeed_smc_update_cs(const AspeedSMCState *s) +{ + int i; + + for (i = 0; i < s->num_cs; ++i) { + qemu_set_irq(s->cs_lines[i], aspeed_smc_is_ce_stop_active(s, i)); + } +} + +static void aspeed_smc_reset(DeviceState *d) +{ + AspeedSMCState *s = ASPEED_SMC(d); + int i; + + memset(s->regs, 0, sizeof s->regs); + + /* Unselect all slaves */ + for (i = 0; i < s->num_cs; ++i) { + s->regs[s->r_ctrl0 + i] |= CTRL_CE_STOP_ACTIVE; + } + + aspeed_smc_update_cs(s); +} + +static bool aspeed_smc_is_implemented(AspeedSMCState *s, hwaddr addr) +{ + return (addr == s->r_conf || addr == s->r_timings || addr == s->r_ce_ctrl || + (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs)); +} + +static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size) +{ + AspeedSMCState *s = ASPEED_SMC(opaque); + + addr >>= 2; + + if (addr >= ARRAY_SIZE(s->regs)) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Out-of-bounds read at 0x%" HWADDR_PRIx "\n", + __func__, addr); + return 0; + } + + if (!aspeed_smc_is_implemented(s, addr)) { + qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n", + __func__, addr); + return 0; + } + + return s->regs[addr]; +} + +static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data, + unsigned int size) +{ + AspeedSMCState *s = ASPEED_SMC(opaque); + uint32_t value = data; + + addr >>= 2; + + if (addr >= ARRAY_SIZE(s->regs)) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Out-of-bounds write at 0x%" HWADDR_PRIx "\n", + __func__, addr); + return; + } + + if (!aspeed_smc_is_implemented(s, addr)) { + qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n", + __func__, addr); + return; + } + + /* + * Not much to do apart from storing the value and set the cs + * lines if the register is a controlling one. + */ + s->regs[addr] = value; + if (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs) { + aspeed_smc_update_cs(s); + } +} + +static const MemoryRegionOps aspeed_smc_ops = { + .read = aspeed_smc_read, + .write = aspeed_smc_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid.unaligned = true, +}; + +static void aspeed_smc_realize(DeviceState *dev, Error **errp) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + AspeedSMCState *s = ASPEED_SMC(dev); + AspeedSMCClass *mc = ASPEED_SMC_GET_CLASS(s); + int i; + + s->ctrl = mc->ctrl; + + /* keep a copy under AspeedSMCState to speed up accesses */ + s->r_conf = s->ctrl->r_conf; + s->r_ce_ctrl = s->ctrl->r_ce_ctrl; + s->r_ctrl0 = s->ctrl->r_ctrl0; + s->r_timings = s->ctrl->r_timings; + s->conf_enable_w0 = s->ctrl->conf_enable_w0; + + /* Enforce some real HW limits */ + if (s->num_cs > s->ctrl->max_slaves) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: num_cs cannot exceed: %d\n", + __func__, s->ctrl->max_slaves); + s->num_cs = s->ctrl->max_slaves; + } + + s->spi = ssi_create_bus(dev, "spi"); + + /* Setup cs_lines for slaves */ + sysbus_init_irq(sbd, &s->irq); + s->cs_lines = g_new0(qemu_irq, s->num_cs); + ssi_auto_connect_slaves(dev, s->cs_lines, s->spi); + + for (i = 0; i < s->num_cs; ++i) { + sysbus_init_irq(sbd, &s->cs_lines[i]); + } + + aspeed_smc_reset(dev); + + memory_region_init_io(&s->mmio, OBJECT(s), &aspeed_smc_ops, s, + s->ctrl->name, ASPEED_SMC_R_MAX * 4); + sysbus_init_mmio(sbd, &s->mmio); +} + +static const VMStateDescription vmstate_aspeed_smc = { + .name = "aspeed.smc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AspeedSMCState, ASPEED_SMC_R_MAX), + VMSTATE_END_OF_LIST() + } +}; + +static Property aspeed_smc_properties[] = { + DEFINE_PROP_UINT32("num-cs", AspeedSMCState, num_cs, 1), + DEFINE_PROP_END_OF_LIST(), +}; + +static void aspeed_smc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + AspeedSMCClass *mc = ASPEED_SMC_CLASS(klass); + + dc->realize = aspeed_smc_realize; + dc->reset = aspeed_smc_reset; + dc->props = aspeed_smc_properties; + dc->vmsd = &vmstate_aspeed_smc; + mc->ctrl = data; +} + +static const TypeInfo aspeed_smc_info = { + .name = TYPE_ASPEED_SMC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AspeedSMCState), + .class_size = sizeof(AspeedSMCClass), + .abstract = true, +}; + +static void aspeed_smc_register_types(void) +{ + int i; + + type_register_static(&aspeed_smc_info); + for (i = 0; i < ARRAY_SIZE(controllers); ++i) { + TypeInfo ti = { + .name = controllers[i].name, + .parent = TYPE_ASPEED_SMC, + .class_init = aspeed_smc_class_init, + .class_data = (void *)&controllers[i], + }; + type_register(&ti); + } +} + +type_init(aspeed_smc_register_types) |