diff options
Diffstat (limited to 'hw/sd')
| -rw-r--r-- | hw/sd/milkymist-memcard.c | 4 | ||||
| -rw-r--r-- | hw/sd/omap_mmc.c | 14 | ||||
| -rw-r--r-- | hw/sd/pl181.c | 4 | ||||
| -rw-r--r-- | hw/sd/sdhci-internal.h | 7 | ||||
| -rw-r--r-- | hw/sd/sdhci.c | 266 | ||||
| -rw-r--r-- | hw/sd/ssi-sd.c | 25 | ||||
| -rw-r--r-- | hw/sd/trace-events | 14 |
7 files changed, 218 insertions, 116 deletions
diff --git a/hw/sd/milkymist-memcard.c b/hw/sd/milkymist-memcard.c index 4008c81002..341da88552 100644 --- a/hw/sd/milkymist-memcard.c +++ b/hw/sd/milkymist-memcard.c @@ -248,6 +248,10 @@ static void milkymist_memcard_reset(DeviceState *d) for (i = 0; i < R_MAX; i++) { s->regs[i] = 0; } + /* Since we're still using the legacy SD API the card is not plugged + * into any bus, and we must reset it manually. + */ + device_reset(DEVICE(s->card)); } static int milkymist_memcard_init(SysBusDevice *dev) diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c index e934cd3656..5b47cadf11 100644 --- a/hw/sd/omap_mmc.c +++ b/hw/sd/omap_mmc.c @@ -305,6 +305,12 @@ void omap_mmc_reset(struct omap_mmc_s *host) host->cdet_enable = 0; qemu_set_irq(host->coverswitch, host->cdet_state); host->clkdiv = 0; + + /* Since we're still using the legacy SD API the card is not plugged + * into any bus, and we must reset it manually. When omap_mmc is + * QOMified this must move into the QOM reset function. + */ + device_reset(DEVICE(host->card)); } static uint64_t omap_mmc_read(void *opaque, hwaddr offset, @@ -587,8 +593,6 @@ struct omap_mmc_s *omap_mmc_init(hwaddr base, s->lines = 1; /* TODO: needs to be settable per-board */ s->rev = 1; - omap_mmc_reset(s); - memory_region_init_io(&s->iomem, NULL, &omap_mmc_ops, s, "omap.mmc", 0x800); memory_region_add_subregion(sysmem, base, &s->iomem); @@ -598,6 +602,8 @@ struct omap_mmc_s *omap_mmc_init(hwaddr base, exit(1); } + omap_mmc_reset(s); + return s; } @@ -613,8 +619,6 @@ struct omap_mmc_s *omap2_mmc_init(struct omap_target_agent_s *ta, s->lines = 4; s->rev = 2; - omap_mmc_reset(s); - memory_region_init_io(&s->iomem, NULL, &omap_mmc_ops, s, "omap.mmc", omap_l4_region_size(ta, 0)); omap_l4_attach(ta, 0, &s->iomem); @@ -628,6 +632,8 @@ struct omap_mmc_s *omap2_mmc_init(struct omap_target_agent_s *ta, s->cdet = qemu_allocate_irq(omap_mmc_cover_cb, s, 0); sd_set_cb(s->card, NULL, s->cdet); + omap_mmc_reset(s); + return s; } diff --git a/hw/sd/pl181.c b/hw/sd/pl181.c index 55c8098ecd..3ba1f7dd23 100644 --- a/hw/sd/pl181.c +++ b/hw/sd/pl181.c @@ -480,6 +480,10 @@ static void pl181_reset(DeviceState *d) /* We can assume our GPIO outputs have been wired up now */ sd_set_cb(s->card, s->cardstatus[0], s->cardstatus[1]); + /* Since we're still using the legacy SD API the card is not plugged + * into any bus, and we must reset it manually. + */ + device_reset(DEVICE(s->card)); } static void pl181_init(Object *obj) diff --git a/hw/sd/sdhci-internal.h b/hw/sd/sdhci-internal.h index 161177cf39..fc807f08f3 100644 --- a/hw/sd/sdhci-internal.h +++ b/hw/sd/sdhci-internal.h @@ -24,8 +24,6 @@ #ifndef SDHCI_INTERNAL_H #define SDHCI_INTERNAL_H -#include "hw/sd/sdhci.h" - /* R/W SDMA System Address register 0x0 */ #define SDHC_SYSAD 0x00 @@ -45,6 +43,7 @@ #define SDHC_TRNS_ACMD12 0x0004 #define SDHC_TRNS_READ 0x0010 #define SDHC_TRNS_MULTI 0x0020 +#define SDHC_TRNMOD_MASK 0x0037 /* R/W Command Register 0x0 */ #define SDHC_CMDREG 0x0E @@ -175,7 +174,7 @@ #define SDHC_ACMD12ERRSTS 0x3C /* HWInit Capabilities Register 0x05E80080 */ -#define SDHC_CAPAREG 0x40 +#define SDHC_CAPAB 0x40 #define SDHC_CAN_DO_DMA 0x00400000 #define SDHC_CAN_DO_ADMA2 0x00080000 #define SDHC_CAN_DO_ADMA1 0x00100000 @@ -227,6 +226,4 @@ enum { sdhc_gap_write = 2 /* SDHC stopped at block gap during write operation */ }; -extern const VMStateDescription sdhci_vmstate; - #endif diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c index b064a087c9..f9264d3be5 100644 --- a/hw/sd/sdhci.c +++ b/hw/sd/sdhci.c @@ -23,38 +23,18 @@ */ #include "qemu/osdep.h" +#include "qapi/error.h" #include "hw/hw.h" #include "sysemu/block-backend.h" #include "sysemu/blockdev.h" #include "sysemu/dma.h" #include "qemu/timer.h" #include "qemu/bitops.h" +#include "hw/sd/sdhci.h" #include "sdhci-internal.h" +#include "qapi/error.h" #include "qemu/log.h" - -/* host controller debug messages */ -#ifndef SDHC_DEBUG -#define SDHC_DEBUG 0 -#endif - -#define DPRINT_L1(fmt, args...) \ - do { \ - if (SDHC_DEBUG) { \ - fprintf(stderr, "QEMU SDHC: " fmt, ## args); \ - } \ - } while (0) -#define DPRINT_L2(fmt, args...) \ - do { \ - if (SDHC_DEBUG > 1) { \ - fprintf(stderr, "QEMU SDHC: " fmt, ## args); \ - } \ - } while (0) -#define ERRPRINT(fmt, args...) \ - do { \ - if (SDHC_DEBUG) { \ - fprintf(stderr, "QEMU SDHC ERROR: " fmt, ## args); \ - } \ - } while (0) +#include "trace.h" #define TYPE_SDHCI_BUS "sdhci-bus" #define SDHCI_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_SDHCI_BUS) @@ -119,7 +99,6 @@ (SDHC_CAPAB_BASECLKFREQ << 8) | (SDHC_CAPAB_TOUNIT << 7) | \ (SDHC_CAPAB_TOCLKFREQ)) -#define MASK_TRNMOD 0x0037 #define MASKED_WRITE(reg, mask, val) (reg = (reg & (mask)) | (val)) static uint8_t sdhci_slotint(SDHCIState *s) @@ -153,8 +132,8 @@ static void sdhci_raise_insertion_irq(void *opaque) static void sdhci_set_inserted(DeviceState *dev, bool level) { SDHCIState *s = (SDHCIState *)dev; - DPRINT_L1("Card state changed: %s!\n", level ? "insert" : "eject"); + trace_sdhci_set_inserted(level ? "insert" : "eject"); if ((s->norintsts & SDHC_NIS_REMOVE) && level) { /* Give target some time to notice card ejection */ timer_mod(s->insert_timer, @@ -236,7 +215,8 @@ static void sdhci_send_command(SDHCIState *s) s->acmd12errsts = 0; request.cmd = s->cmdreg >> 8; request.arg = s->argument; - DPRINT_L1("sending CMD%u ARG[0x%08x]\n", request.cmd, request.arg); + + trace_sdhci_send_command(request.cmd, request.arg); rlen = sdbus_do_command(&s->sdbus, &request, response); if (s->cmdreg & SDHC_CMD_RESPONSE) { @@ -244,7 +224,7 @@ static void sdhci_send_command(SDHCIState *s) s->rspreg[0] = (response[0] << 24) | (response[1] << 16) | (response[2] << 8) | response[3]; s->rspreg[1] = s->rspreg[2] = s->rspreg[3] = 0; - DPRINT_L1("Response: RSPREG[31..0]=0x%08x\n", s->rspreg[0]); + trace_sdhci_response4(s->rspreg[0]); } else if (rlen == 16) { s->rspreg[0] = (response[11] << 24) | (response[12] << 16) | (response[13] << 8) | response[14]; @@ -254,11 +234,10 @@ static void sdhci_send_command(SDHCIState *s) (response[5] << 8) | response[6]; s->rspreg[3] = (response[0] << 16) | (response[1] << 8) | response[2]; - DPRINT_L1("Response received:\n RSPREG[127..96]=0x%08x, RSPREG[95.." - "64]=0x%08x,\n RSPREG[63..32]=0x%08x, RSPREG[31..0]=0x%08x\n", - s->rspreg[3], s->rspreg[2], s->rspreg[1], s->rspreg[0]); + trace_sdhci_response16(s->rspreg[3], s->rspreg[2], + s->rspreg[1], s->rspreg[0]); } else { - ERRPRINT("Timeout waiting for command response\n"); + trace_sdhci_error("timeout waiting for command response"); if (s->errintstsen & SDHC_EISEN_CMDTIMEOUT) { s->errintsts |= SDHC_EIS_CMDTIMEOUT; s->norintsts |= SDHC_NIS_ERR; @@ -292,7 +271,7 @@ static void sdhci_end_transfer(SDHCIState *s) request.cmd = 0x0C; request.arg = 0; - DPRINT_L1("Automatically issue CMD%d %08x\n", request.cmd, request.arg); + trace_sdhci_end_transfer(request.cmd, request.arg); sdbus_do_command(&s->sdbus, &request, response); /* Auto CMD12 response goes to the upper Response register */ s->rspreg[3] = (response[0] << 24) | (response[1] << 16) | @@ -361,7 +340,7 @@ static uint32_t sdhci_read_dataport(SDHCIState *s, unsigned size) /* first check that a valid data exists in host controller input buffer */ if ((s->prnsts & SDHC_DATA_AVAILABLE) == 0) { - ERRPRINT("Trying to read from empty buffer\n"); + trace_sdhci_error("read from empty buffer"); return 0; } @@ -370,8 +349,7 @@ static uint32_t sdhci_read_dataport(SDHCIState *s, unsigned size) s->data_count++; /* check if we've read all valid data (blksize bytes) from buffer */ if ((s->data_count) >= (s->blksize & 0x0fff)) { - DPRINT_L2("All %u bytes of data have been read from input buffer\n", - s->data_count); + trace_sdhci_read_dataport(s->data_count); s->prnsts &= ~SDHC_DATA_AVAILABLE; /* no more data in a buffer */ s->data_count = 0; /* next buff read must start at position [0] */ @@ -454,7 +432,7 @@ static void sdhci_write_dataport(SDHCIState *s, uint32_t value, unsigned size) /* Check that there is free space left in a buffer */ if (!(s->prnsts & SDHC_SPACE_AVAILABLE)) { - ERRPRINT("Can't write to data buffer: buffer full\n"); + trace_sdhci_error("Can't write to data buffer: buffer full"); return; } @@ -463,8 +441,7 @@ static void sdhci_write_dataport(SDHCIState *s, uint32_t value, unsigned size) s->data_count++; value >>= 8; if (s->data_count >= (s->blksize & 0x0fff)) { - DPRINT_L2("write buffer filled with %u bytes of data\n", - s->data_count); + trace_sdhci_write_dataport(s->data_count); s->data_count = 0; s->prnsts &= ~SDHC_SPACE_AVAILABLE; if (s->prnsts & SDHC_DOING_WRITE) { @@ -519,7 +496,7 @@ static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s) s->blkcnt--; } } - dma_memory_write(&address_space_memory, s->sdmasysad, + dma_memory_write(s->dma_as, s->sdmasysad, &s->fifo_buffer[begin], s->data_count - begin); s->sdmasysad += s->data_count - begin; if (s->data_count == block_size) { @@ -541,7 +518,7 @@ static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s) s->data_count = block_size; boundary_count -= block_size - begin; } - dma_memory_read(&address_space_memory, s->sdmasysad, + dma_memory_read(s->dma_as, s->sdmasysad, &s->fifo_buffer[begin], s->data_count - begin); s->sdmasysad += s->data_count - begin; if (s->data_count == block_size) { @@ -579,11 +556,9 @@ static void sdhci_sdma_transfer_single_block(SDHCIState *s) for (n = 0; n < datacnt; n++) { s->fifo_buffer[n] = sdbus_read_data(&s->sdbus); } - dma_memory_write(&address_space_memory, s->sdmasysad, s->fifo_buffer, - datacnt); + dma_memory_write(s->dma_as, s->sdmasysad, s->fifo_buffer, datacnt); } else { - dma_memory_read(&address_space_memory, s->sdmasysad, s->fifo_buffer, - datacnt); + dma_memory_read(s->dma_as, s->sdmasysad, s->fifo_buffer, datacnt); for (n = 0; n < datacnt; n++) { sdbus_write_data(&s->sdbus, s->fifo_buffer[n]); } @@ -607,7 +582,7 @@ static void get_adma_description(SDHCIState *s, ADMADescr *dscr) hwaddr entry_addr = (hwaddr)s->admasysaddr; switch (SDHC_DMA_TYPE(s->hostctl)) { case SDHC_CTRL_ADMA2_32: - dma_memory_read(&address_space_memory, entry_addr, (uint8_t *)&adma2, + dma_memory_read(s->dma_as, entry_addr, (uint8_t *)&adma2, sizeof(adma2)); adma2 = le64_to_cpu(adma2); /* The spec does not specify endianness of descriptor table. @@ -619,7 +594,7 @@ static void get_adma_description(SDHCIState *s, ADMADescr *dscr) dscr->incr = 8; break; case SDHC_CTRL_ADMA1_32: - dma_memory_read(&address_space_memory, entry_addr, (uint8_t *)&adma1, + dma_memory_read(s->dma_as, entry_addr, (uint8_t *)&adma1, sizeof(adma1)); adma1 = le32_to_cpu(adma1); dscr->addr = (hwaddr)(adma1 & 0xFFFFF000); @@ -632,12 +607,12 @@ static void get_adma_description(SDHCIState *s, ADMADescr *dscr) } break; case SDHC_CTRL_ADMA2_64: - dma_memory_read(&address_space_memory, entry_addr, + dma_memory_read(s->dma_as, entry_addr, (uint8_t *)(&dscr->attr), 1); - dma_memory_read(&address_space_memory, entry_addr + 2, + dma_memory_read(s->dma_as, entry_addr + 2, (uint8_t *)(&dscr->length), 2); dscr->length = le16_to_cpu(dscr->length); - dma_memory_read(&address_space_memory, entry_addr + 4, + dma_memory_read(s->dma_as, entry_addr + 4, (uint8_t *)(&dscr->addr), 8); dscr->attr = le64_to_cpu(dscr->attr); dscr->attr &= 0xfffffff8; @@ -652,15 +627,14 @@ static void sdhci_do_adma(SDHCIState *s) { unsigned int n, begin, length; const uint16_t block_size = s->blksize & 0x0fff; - ADMADescr dscr; + ADMADescr dscr = {}; int i; for (i = 0; i < SDHC_ADMA_DESCS_PER_DELAY; ++i) { s->admaerr &= ~SDHC_ADMAERR_LENGTH_MISMATCH; get_adma_description(s, &dscr); - DPRINT_L2("ADMA loop: addr=" TARGET_FMT_plx ", len=%d, attr=%x\n", - dscr.addr, dscr.length, dscr.attr); + trace_sdhci_adma_loop(dscr.addr, dscr.length, dscr.attr); if ((dscr.attr & SDHC_ADMA_ATTR_VALID) == 0) { /* Indicate that error occurred in ST_FDS state */ @@ -697,7 +671,7 @@ static void sdhci_do_adma(SDHCIState *s) s->data_count = block_size; length -= block_size - begin; } - dma_memory_write(&address_space_memory, dscr.addr, + dma_memory_write(s->dma_as, dscr.addr, &s->fifo_buffer[begin], s->data_count - begin); dscr.addr += s->data_count - begin; @@ -721,7 +695,7 @@ static void sdhci_do_adma(SDHCIState *s) s->data_count = block_size; length -= block_size - begin; } - dma_memory_read(&address_space_memory, dscr.addr, + dma_memory_read(s->dma_as, dscr.addr, &s->fifo_buffer[begin], s->data_count - begin); dscr.addr += s->data_count - begin; @@ -743,8 +717,7 @@ static void sdhci_do_adma(SDHCIState *s) break; case SDHC_ADMA_ATTR_ACT_LINK: /* link to next descriptor table */ s->admasysaddr = dscr.addr; - DPRINT_L1("ADMA link: admasysaddr=0x%" PRIx64 "\n", - s->admasysaddr); + trace_sdhci_adma("link", s->admasysaddr); break; default: s->admasysaddr += dscr.incr; @@ -752,8 +725,7 @@ static void sdhci_do_adma(SDHCIState *s) } if (dscr.attr & SDHC_ADMA_ATTR_INT) { - DPRINT_L1("ADMA interrupt: admasysaddr=0x%" PRIx64 "\n", - s->admasysaddr); + trace_sdhci_adma("interrupt", s->admasysaddr); if (s->norintstsen & SDHC_NISEN_DMA) { s->norintsts |= SDHC_NIS_DMA; } @@ -764,15 +736,15 @@ static void sdhci_do_adma(SDHCIState *s) /* ADMA transfer terminates if blkcnt == 0 or by END attribute */ if (((s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) || (dscr.attr & SDHC_ADMA_ATTR_END)) { - DPRINT_L2("ADMA transfer completed\n"); + trace_sdhci_adma_transfer_completed(); if (length || ((dscr.attr & SDHC_ADMA_ATTR_END) && (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && s->blkcnt != 0)) { - ERRPRINT("SD/MMC host ADMA length mismatch\n"); + trace_sdhci_error("SD/MMC host ADMA length mismatch"); s->admaerr |= SDHC_ADMAERR_LENGTH_MISMATCH | SDHC_ADMAERR_STATE_ST_TFR; if (s->errintstsen & SDHC_EISEN_ADMAERR) { - ERRPRINT("Set ADMA error flag\n"); + trace_sdhci_error("Set ADMA error flag"); s->errintsts |= SDHC_EIS_ADMAERR; s->norintsts |= SDHC_NIS_ERR; } @@ -808,7 +780,7 @@ static void sdhci_data_transfer(void *opaque) break; case SDHC_CTRL_ADMA1_32: if (!(s->capareg & SDHC_CAN_DO_ADMA1)) { - ERRPRINT("ADMA1 not supported\n"); + trace_sdhci_error("ADMA1 not supported"); break; } @@ -816,7 +788,7 @@ static void sdhci_data_transfer(void *opaque) break; case SDHC_CTRL_ADMA2_32: if (!(s->capareg & SDHC_CAN_DO_ADMA2)) { - ERRPRINT("ADMA2 not supported\n"); + trace_sdhci_error("ADMA2 not supported"); break; } @@ -825,14 +797,14 @@ static void sdhci_data_transfer(void *opaque) case SDHC_CTRL_ADMA2_64: if (!(s->capareg & SDHC_CAN_DO_ADMA2) || !(s->capareg & SDHC_64_BIT_BUS_SUPPORT)) { - ERRPRINT("64 bit ADMA not supported\n"); + trace_sdhci_error("64 bit ADMA not supported"); break; } sdhci_do_adma(s); break; default: - ERRPRINT("Unsupported DMA type\n"); + trace_sdhci_error("Unsupported DMA type"); break; } } else { @@ -867,8 +839,8 @@ static inline bool sdhci_buff_access_is_sequential(SDHCIState *s, unsigned byte_num) { if ((s->data_count & 0x3) != byte_num) { - ERRPRINT("Non-sequential access to Buffer Data Port register" - "is prohibited\n"); + trace_sdhci_error("Non-sequential access to Buffer Data Port register" + "is prohibited\n"); return false; } return true; @@ -898,8 +870,7 @@ static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size) case SDHC_BDATA: if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) { ret = sdhci_read_dataport(s, size); - DPRINT_L2("read %ub: addr[0x%04x] -> %u(0x%x)\n", size, (int)offset, - ret, ret); + trace_sdhci_access("rd", size << 3, offset, "->", ret, ret); return ret; } break; @@ -925,11 +896,17 @@ static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size) case SDHC_ACMD12ERRSTS: ret = s->acmd12errsts; break; - case SDHC_CAPAREG: - ret = s->capareg; + case SDHC_CAPAB: + ret = (uint32_t)s->capareg; + break; + case SDHC_CAPAB + 4: + ret = (uint32_t)(s->capareg >> 32); break; case SDHC_MAXCURR: - ret = s->maxcurr; + ret = (uint32_t)s->maxcurr; + break; + case SDHC_MAXCURR + 4: + ret = (uint32_t)(s->maxcurr >> 32); break; case SDHC_ADMAERR: ret = s->admaerr; @@ -944,13 +921,14 @@ static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size) ret = (SD_HOST_SPECv2_VERS << 16) | sdhci_slotint(s); break; default: - ERRPRINT("bad %ub read: addr[0x%04x]\n", size, (int)offset); + qemu_log_mask(LOG_UNIMP, "SDHC rd_%ub @0x%02" HWADDR_PRIx " " + "not implemented\n", size, offset); break; } ret >>= (offset & 0x3) * 8; ret &= (1ULL << (size * 8)) - 1; - DPRINT_L2("read %ub: addr[0x%04x] -> %u(0x%x)\n", size, (int)offset, ret, ret); + trace_sdhci_access("rd", size << 3, offset, "->", ret, ret); return ret; } @@ -1051,7 +1029,7 @@ sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size) if (!(s->capareg & SDHC_CAN_DO_DMA)) { value &= ~SDHC_TRNS_DMA; } - MASKED_WRITE(s->trnmod, mask, value & MASK_TRNMOD); + MASKED_WRITE(s->trnmod, mask, value & SDHC_TRNMOD_MASK); MASKED_WRITE(s->cmdreg, mask >> 16, value >> 16); /* Writing to the upper byte of CMDREG triggers SD command generation */ @@ -1149,13 +1127,25 @@ sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size) } sdhci_update_irq(s); break; + case SDHC_ACMD12ERRSTS: + MASKED_WRITE(s->acmd12errsts, mask, value); + break; + + case SDHC_CAPAB: + case SDHC_CAPAB + 4: + case SDHC_MAXCURR: + case SDHC_MAXCURR + 4: + qemu_log_mask(LOG_GUEST_ERROR, "SDHC wr_%ub @0x%02" HWADDR_PRIx + " <- 0x%08x read-only\n", size, offset, value >> shift); + break; + default: - ERRPRINT("bad %ub write offset: addr[0x%04x] <- %u(0x%x)\n", - size, (int)offset, value >> shift, value >> shift); + qemu_log_mask(LOG_UNIMP, "SDHC wr_%ub @0x%02" HWADDR_PRIx " <- 0x%08x " + "not implemented\n", size, offset, value >> shift); break; } - DPRINT_L2("write %ub: addr[0x%04x] <- %u(0x%x)\n", - size, (int)offset, value >> shift, value >> shift); + trace_sdhci_access("wr", size << 3, offset, "<-", + value >> shift, value >> shift); } static const MemoryRegionOps sdhci_mmio_ops = { @@ -1184,6 +1174,14 @@ static inline unsigned int sdhci_get_fifolen(SDHCIState *s) } } +/* --- qdev common --- */ + +#define DEFINE_SDHCI_COMMON_PROPERTIES(_state) \ + /* Capabilities registers provide information on supported features + * of this specific host controller implementation */ \ + DEFINE_PROP_UINT64("capareg", _state, capareg, SDHC_CAPAB_REG_DEFAULT), \ + DEFINE_PROP_UINT64("maxcurr", _state, maxcurr, 0) + static void sdhci_initfn(SDHCIState *s) { qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), @@ -1199,13 +1197,31 @@ static void sdhci_uninitfn(SDHCIState *s) timer_free(s->insert_timer); timer_del(s->transfer_timer); timer_free(s->transfer_timer); - qemu_free_irq(s->eject_cb); - qemu_free_irq(s->ro_cb); g_free(s->fifo_buffer); s->fifo_buffer = NULL; } +static void sdhci_common_realize(SDHCIState *s, Error **errp) +{ + s->buf_maxsz = sdhci_get_fifolen(s); + s->fifo_buffer = g_malloc0(s->buf_maxsz); + + memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci", + SDHC_REGISTERS_MAP_SIZE); +} + +static void sdhci_common_unrealize(SDHCIState *s, Error **errp) +{ + /* This function is expected to be called only once for each class: + * - SysBus: via DeviceClass->unrealize(), + * - PCI: via PCIDeviceClass->exit(). + * However to avoid double-free and/or use-after-free we still nullify + * this variable (better safe than sorry!). */ + g_free(s->fifo_buffer); + s->fifo_buffer = NULL; +} + static bool sdhci_pending_insert_vmstate_needed(void *opaque) { SDHCIState *s = opaque; @@ -1265,32 +1281,44 @@ const VMStateDescription sdhci_vmstate = { }, }; -/* Capabilities registers provide information on supported features of this - * specific host controller implementation */ +static void sdhci_common_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); + dc->vmsd = &sdhci_vmstate; + dc->reset = sdhci_poweron_reset; +} + +/* --- qdev PCI --- */ + static Property sdhci_pci_properties[] = { - DEFINE_PROP_UINT32("capareg", SDHCIState, capareg, - SDHC_CAPAB_REG_DEFAULT), - DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0), + DEFINE_SDHCI_COMMON_PROPERTIES(SDHCIState), DEFINE_PROP_END_OF_LIST(), }; static void sdhci_pci_realize(PCIDevice *dev, Error **errp) { SDHCIState *s = PCI_SDHCI(dev); + + sdhci_initfn(s); + sdhci_common_realize(s, errp); + if (errp && *errp) { + return; + } + dev->config[PCI_CLASS_PROG] = 0x01; /* Standard Host supported DMA */ dev->config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */ - sdhci_initfn(s); - s->buf_maxsz = sdhci_get_fifolen(s); - s->fifo_buffer = g_malloc0(s->buf_maxsz); s->irq = pci_allocate_irq(dev); - memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci", - SDHC_REGISTERS_MAP_SIZE); - pci_register_bar(dev, 0, 0, &s->iomem); + s->dma_as = pci_get_address_space(dev); + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->iomem); } static void sdhci_pci_exit(PCIDevice *dev) { SDHCIState *s = PCI_SDHCI(dev); + + sdhci_common_unrealize(s, &error_abort); sdhci_uninitfn(s); } @@ -1304,10 +1332,9 @@ static void sdhci_pci_class_init(ObjectClass *klass, void *data) k->vendor_id = PCI_VENDOR_ID_REDHAT; k->device_id = PCI_DEVICE_ID_REDHAT_SDHCI; k->class_id = PCI_CLASS_SYSTEM_SDHCI; - set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); - dc->vmsd = &sdhci_vmstate; dc->props = sdhci_pci_properties; - dc->reset = sdhci_poweron_reset; + + sdhci_common_class_init(klass, data); } static const TypeInfo sdhci_pci_info = { @@ -1321,12 +1348,14 @@ static const TypeInfo sdhci_pci_info = { }, }; +/* --- qdev SysBus --- */ + static Property sdhci_sysbus_properties[] = { - DEFINE_PROP_UINT32("capareg", SDHCIState, capareg, - SDHC_CAPAB_REG_DEFAULT), - DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0), + DEFINE_SDHCI_COMMON_PROPERTIES(SDHCIState), DEFINE_PROP_BOOL("pending-insert-quirk", SDHCIState, pending_insert_quirk, false), + DEFINE_PROP_LINK("dma", SDHCIState, + dma_mr, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_END_OF_LIST(), }; @@ -1340,6 +1369,11 @@ static void sdhci_sysbus_init(Object *obj) static void sdhci_sysbus_finalize(Object *obj) { SDHCIState *s = SYSBUS_SDHCI(obj); + + if (s->dma_mr) { + object_unparent(OBJECT(s->dma_mr)); + } + sdhci_uninitfn(s); } @@ -1348,22 +1382,42 @@ static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp) SDHCIState *s = SYSBUS_SDHCI(dev); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - s->buf_maxsz = sdhci_get_fifolen(s); - s->fifo_buffer = g_malloc0(s->buf_maxsz); + sdhci_common_realize(s, errp); + if (errp && *errp) { + return; + } + + if (s->dma_mr) { + address_space_init(s->dma_as, s->dma_mr, "sdhci-dma"); + } else { + /* use system_memory() if property "dma" not set */ + s->dma_as = &address_space_memory; + } + sysbus_init_irq(sbd, &s->irq); - memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci", - SDHC_REGISTERS_MAP_SIZE); sysbus_init_mmio(sbd, &s->iomem); } +static void sdhci_sysbus_unrealize(DeviceState *dev, Error **errp) +{ + SDHCIState *s = SYSBUS_SDHCI(dev); + + sdhci_common_unrealize(s, &error_abort); + + if (s->dma_mr) { + address_space_destroy(s->dma_as); + } +} + static void sdhci_sysbus_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); - dc->vmsd = &sdhci_vmstate; dc->props = sdhci_sysbus_properties; dc->realize = sdhci_sysbus_realize; - dc->reset = sdhci_poweron_reset; + dc->unrealize = sdhci_sysbus_unrealize; + + sdhci_common_class_init(klass, data); } static const TypeInfo sdhci_sysbus_info = { @@ -1375,6 +1429,8 @@ static const TypeInfo sdhci_sysbus_info = { .class_init = sdhci_sysbus_class_init, }; +/* --- qdev bus master --- */ + static void sdhci_bus_class_init(ObjectClass *klass, void *data) { SDBusClass *sbc = SD_BUS_CLASS(klass); diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c index 24001dc3e6..f88f509e0a 100644 --- a/hw/sd/ssi-sd.c +++ b/hw/sd/ssi-sd.c @@ -50,6 +50,9 @@ typedef struct { SDState *sd; } ssi_sd_state; +#define TYPE_SSI_SD "ssi-sd" +#define SSI_SD(obj) OBJECT_CHECK(ssi_sd_state, (obj), TYPE_SSI_SD) + /* State word bits. */ #define SSI_SDR_LOCKED 0x0001 #define SSI_SDR_WP_ERASE 0x0002 @@ -241,7 +244,6 @@ static void ssi_sd_realize(SSISlave *d, Error **errp) ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, d); DriveInfo *dinfo; - s->mode = SSI_SD_CMD; /* FIXME use a qdev drive property instead of drive_get_next() */ dinfo = drive_get_next(IF_SD); s->sd = sd_init(dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, true); @@ -251,6 +253,24 @@ static void ssi_sd_realize(SSISlave *d, Error **errp) } } +static void ssi_sd_reset(DeviceState *dev) +{ + ssi_sd_state *s = SSI_SD(dev); + + s->mode = SSI_SD_CMD; + s->cmd = 0; + memset(s->cmdarg, 0, sizeof(s->cmdarg)); + memset(s->response, 0, sizeof(s->response)); + s->arglen = 0; + s->response_pos = 0; + s->stopping = 0; + + /* Since we're still using the legacy SD API the card is not plugged + * into any bus, and we must reset it manually. + */ + device_reset(DEVICE(s->sd)); +} + static void ssi_sd_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -260,10 +280,11 @@ static void ssi_sd_class_init(ObjectClass *klass, void *data) k->transfer = ssi_sd_transfer; k->cs_polarity = SSI_CS_LOW; dc->vmsd = &vmstate_ssi_sd; + dc->reset = ssi_sd_reset; } static const TypeInfo ssi_sd_info = { - .name = "ssi-sd", + .name = TYPE_SSI_SD, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(ssi_sd_state), .class_init = ssi_sd_class_init, diff --git a/hw/sd/trace-events b/hw/sd/trace-events index 6eca3470e2..0a121156a3 100644 --- a/hw/sd/trace-events +++ b/hw/sd/trace-events @@ -1,5 +1,19 @@ # See docs/devel/tracing.txt for syntax documentation. +# hw/sd/sdhci.c +sdhci_set_inserted(const char *level) "card state changed: %s" +sdhci_send_command(uint8_t cmd, uint32_t arg) "CMD%02u ARG[0x%08x]" +sdhci_error(const char *msg) "%s" +sdhci_response4(uint32_t r0) "RSPREG[31..0]=0x%08x" +sdhci_response16(uint32_t r3, uint32_t r2, uint32_t r1, uint32_t r0) "RSPREG[127..96]=0x%08x, RSPREG[95..64]=0x%08x, RSPREG[63..32]=0x%08x, RSPREG[31..0]=0x%08x" +sdhci_end_transfer(uint8_t cmd, uint32_t arg) "Automatically issue CMD%02u 0x%08x" +sdhci_adma(const char *desc, uint32_t sysad) "%s: admasysaddr=0x%" PRIx32 +sdhci_adma_loop(uint64_t addr, uint16_t length, uint8_t attr) "addr=0x%08" PRIx64 ", len=%d, attr=0x%x" +sdhci_adma_transfer_completed(void) "" +sdhci_access(const char *access, unsigned int size, uint64_t offset, const char *dir, uint64_t val, uint64_t val2) "%s%u: addr[0x%04" PRIx64 "] %s 0x%08" PRIx64 " (%" PRIu64 ")" +sdhci_read_dataport(uint16_t data_count) "all %u bytes of data have been read from input buffer" +sdhci_write_dataport(uint16_t data_count) "write buffer filled with %u bytes of data" + # hw/sd/milkymist-memcard.c milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" |