diff options
Diffstat (limited to 'hw/scsi/srp.h')
| -rw-r--r-- | hw/scsi/srp.h | 240 |
1 files changed, 240 insertions, 0 deletions
diff --git a/hw/scsi/srp.h b/hw/scsi/srp.h new file mode 100644 index 0000000000..5e0cad5c19 --- /dev/null +++ b/hw/scsi/srp.h @@ -0,0 +1,240 @@ +/* + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#ifndef SCSI_SRP_H +#define SCSI_SRP_H + +/* + * Structures and constants for the SCSI RDMA Protocol (SRP) as + * defined by the INCITS T10 committee. This file was written using + * draft Revision 16a of the SRP standard. + */ + +enum { + + SRP_LOGIN_REQ = 0x00, + SRP_TSK_MGMT = 0x01, + SRP_CMD = 0x02, + SRP_I_LOGOUT = 0x03, + SRP_LOGIN_RSP = 0xc0, + SRP_RSP = 0xc1, + SRP_LOGIN_REJ = 0xc2, + SRP_T_LOGOUT = 0x80, + SRP_CRED_REQ = 0x81, + SRP_AER_REQ = 0x82, + SRP_CRED_RSP = 0x41, + SRP_AER_RSP = 0x42 +}; + +enum { + SRP_BUF_FORMAT_DIRECT = 1 << 1, + SRP_BUF_FORMAT_INDIRECT = 1 << 2 +}; + +enum { + SRP_NO_DATA_DESC = 0, + SRP_DATA_DESC_DIRECT = 1, + SRP_DATA_DESC_INDIRECT = 2 +}; + +enum { + SRP_TSK_ABORT_TASK = 0x01, + SRP_TSK_ABORT_TASK_SET = 0x02, + SRP_TSK_CLEAR_TASK_SET = 0x04, + SRP_TSK_LUN_RESET = 0x08, + SRP_TSK_CLEAR_ACA = 0x40 +}; + +enum srp_login_rej_reason { + SRP_LOGIN_REJ_UNABLE_ESTABLISH_CHANNEL = 0x00010000, + SRP_LOGIN_REJ_INSUFFICIENT_RESOURCES = 0x00010001, + SRP_LOGIN_REJ_REQ_IT_IU_LENGTH_TOO_LARGE = 0x00010002, + SRP_LOGIN_REJ_UNABLE_ASSOCIATE_CHANNEL = 0x00010003, + SRP_LOGIN_REJ_UNSUPPORTED_DESCRIPTOR_FMT = 0x00010004, + SRP_LOGIN_REJ_MULTI_CHANNEL_UNSUPPORTED = 0x00010005, + SRP_LOGIN_REJ_CHANNEL_LIMIT_REACHED = 0x00010006 +}; + +enum { + SRP_REV10_IB_IO_CLASS = 0xff00, + SRP_REV16A_IB_IO_CLASS = 0x0100 +}; + +struct srp_direct_buf { + uint64_t va; + uint32_t key; + uint32_t len; +}; + +/* + * We need the packed attribute because the SRP spec puts the list of + * descriptors at an offset of 20, which is not aligned to the size of + * struct srp_direct_buf. The whole structure must be packed to avoid + * having the 20-byte structure padded to 24 bytes on 64-bit architectures. + */ +struct srp_indirect_buf { + struct srp_direct_buf table_desc; + uint32_t len; + struct srp_direct_buf desc_list[0]; +} QEMU_PACKED; + +enum { + SRP_MULTICHAN_SINGLE = 0, + SRP_MULTICHAN_MULTI = 1 +}; + +struct srp_login_req { + uint8_t opcode; + uint8_t reserved1[7]; + uint64_t tag; + uint32_t req_it_iu_len; + uint8_t reserved2[4]; + uint16_t req_buf_fmt; + uint8_t req_flags; + uint8_t reserved3[5]; + uint8_t initiator_port_id[16]; + uint8_t target_port_id[16]; +}; + +/* + * The SRP spec defines the size of the LOGIN_RSP structure to be 52 + * bytes, so it needs to be packed to avoid having it padded to 56 + * bytes on 64-bit architectures. + */ +struct srp_login_rsp { + uint8_t opcode; + uint8_t reserved1[3]; + uint32_t req_lim_delta; + uint64_t tag; + uint32_t max_it_iu_len; + uint32_t max_ti_iu_len; + uint16_t buf_fmt; + uint8_t rsp_flags; + uint8_t reserved2[25]; +} QEMU_PACKED; + +struct srp_login_rej { + uint8_t opcode; + uint8_t reserved1[3]; + uint32_t reason; + uint64_t tag; + uint8_t reserved2[8]; + uint16_t buf_fmt; + uint8_t reserved3[6]; +}; + +struct srp_i_logout { + uint8_t opcode; + uint8_t reserved[7]; + uint64_t tag; +}; + +struct srp_t_logout { + uint8_t opcode; + uint8_t sol_not; + uint8_t reserved[2]; + uint32_t reason; + uint64_t tag; +}; + +/* + * We need the packed attribute because the SRP spec only aligns the + * 8-byte LUN field to 4 bytes. + */ +struct srp_tsk_mgmt { + uint8_t opcode; + uint8_t sol_not; + uint8_t reserved1[6]; + uint64_t tag; + uint8_t reserved2[4]; + uint64_t lun; + uint8_t reserved3[2]; + uint8_t tsk_mgmt_func; + uint8_t reserved4; + uint64_t task_tag; + uint8_t reserved5[8]; +} QEMU_PACKED; + +/* + * We need the packed attribute because the SRP spec only aligns the + * 8-byte LUN field to 4 bytes. + */ +struct srp_cmd { + uint8_t opcode; + uint8_t sol_not; + uint8_t reserved1[3]; + uint8_t buf_fmt; + uint8_t data_out_desc_cnt; + uint8_t data_in_desc_cnt; + uint64_t tag; + uint8_t reserved2[4]; + uint64_t lun; + uint8_t reserved3; + uint8_t task_attr; + uint8_t reserved4; + uint8_t add_cdb_len; + uint8_t cdb[16]; + uint8_t add_data[0]; +} QEMU_PACKED; + +enum { + SRP_RSP_FLAG_RSPVALID = 1 << 0, + SRP_RSP_FLAG_SNSVALID = 1 << 1, + SRP_RSP_FLAG_DOOVER = 1 << 2, + SRP_RSP_FLAG_DOUNDER = 1 << 3, + SRP_RSP_FLAG_DIOVER = 1 << 4, + SRP_RSP_FLAG_DIUNDER = 1 << 5 +}; + +/* + * The SRP spec defines the size of the RSP structure to be 36 bytes, + * so it needs to be packed to avoid having it padded to 40 bytes on + * 64-bit architectures. + */ +struct srp_rsp { + uint8_t opcode; + uint8_t sol_not; + uint8_t reserved1[2]; + uint32_t req_lim_delta; + uint64_t tag; + uint8_t reserved2[2]; + uint8_t flags; + uint8_t status; + uint32_t data_out_res_cnt; + uint32_t data_in_res_cnt; + uint32_t sense_data_len; + uint32_t resp_data_len; + uint8_t data[0]; +} QEMU_PACKED; + +#endif /* SCSI_SRP_H */ |