diff options
Diffstat (limited to 'hw/pci/pci-hotplug.c')
-rw-r--r-- | hw/pci/pci-hotplug.c | 292 |
1 files changed, 292 insertions, 0 deletions
diff --git a/hw/pci/pci-hotplug.c b/hw/pci/pci-hotplug.c new file mode 100644 index 0000000000..3bcfdcc1a6 --- /dev/null +++ b/hw/pci/pci-hotplug.c @@ -0,0 +1,292 @@ +/* + * QEMU PCI hotplug support + * + * Copyright (c) 2004 Fabrice Bellard + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "hw.h" +#include "boards.h" +#include "pci.h" +#include "net.h" +#include "pc.h" +#include "monitor.h" +#include "scsi.h" +#include "virtio-blk.h" +#include "qemu-config.h" +#include "blockdev.h" +#include "error.h" + +#if defined(TARGET_I386) +static PCIDevice *qemu_pci_hot_add_nic(Monitor *mon, + const char *devaddr, + const char *opts_str) +{ + Error *local_err = NULL; + QemuOpts *opts; + PCIBus *bus; + int ret, devfn; + + bus = pci_get_bus_devfn(&devfn, devaddr); + if (!bus) { + monitor_printf(mon, "Invalid PCI device address %s\n", devaddr); + return NULL; + } + if (!((BusState*)bus)->allow_hotplug) { + monitor_printf(mon, "PCI bus doesn't support hotplug\n"); + return NULL; + } + + opts = qemu_opts_parse(qemu_find_opts("net"), opts_str ? opts_str : "", 0); + if (!opts) { + return NULL; + } + + qemu_opt_set(opts, "type", "nic"); + + ret = net_client_init(opts, 0, &local_err); + if (error_is_set(&local_err)) { + qerror_report_err(local_err); + error_free(local_err); + return NULL; + } + if (nd_table[ret].devaddr) { + monitor_printf(mon, "Parameter addr not supported\n"); + return NULL; + } + return pci_nic_init(&nd_table[ret], "rtl8139", devaddr); +} + +static int scsi_hot_add(Monitor *mon, DeviceState *adapter, + DriveInfo *dinfo, int printinfo) +{ + SCSIBus *scsibus; + SCSIDevice *scsidev; + + scsibus = (SCSIBus *) + object_dynamic_cast(OBJECT(QLIST_FIRST(&adapter->child_bus)), + TYPE_SCSI_BUS); + if (!scsibus) { + error_report("Device is not a SCSI adapter"); + return -1; + } + + /* + * drive_init() tries to find a default for dinfo->unit. Doesn't + * work at all for hotplug though as we assign the device to a + * specific bus instead of the first bus with spare scsi ids. + * + * Ditch the calculated value and reload from option string (if + * specified). + */ + dinfo->unit = qemu_opt_get_number(dinfo->opts, "unit", -1); + dinfo->bus = scsibus->busnr; + scsidev = scsi_bus_legacy_add_drive(scsibus, dinfo->bdrv, dinfo->unit, + false, -1); + if (!scsidev) { + return -1; + } + dinfo->unit = scsidev->id; + + if (printinfo) + monitor_printf(mon, "OK bus %d, unit %d\n", + scsibus->busnr, scsidev->id); + return 0; +} + +int pci_drive_hot_add(Monitor *mon, const QDict *qdict, DriveInfo *dinfo) +{ + int dom, pci_bus; + unsigned slot; + PCIDevice *dev; + const char *pci_addr = qdict_get_str(qdict, "pci_addr"); + + switch (dinfo->type) { + case IF_SCSI: + if (pci_read_devaddr(mon, pci_addr, &dom, &pci_bus, &slot)) { + goto err; + } + dev = pci_find_device(pci_find_root_bus(dom), pci_bus, + PCI_DEVFN(slot, 0)); + if (!dev) { + monitor_printf(mon, "no pci device with address %s\n", pci_addr); + goto err; + } + if (scsi_hot_add(mon, &dev->qdev, dinfo, 1) != 0) { + goto err; + } + break; + default: + monitor_printf(mon, "Can't hot-add drive to type %d\n", dinfo->type); + goto err; + } + + return 0; +err: + return -1; +} + +static PCIDevice *qemu_pci_hot_add_storage(Monitor *mon, + const char *devaddr, + const char *opts) +{ + PCIDevice *dev; + DriveInfo *dinfo = NULL; + int type = -1; + char buf[128]; + PCIBus *bus; + int devfn; + + if (get_param_value(buf, sizeof(buf), "if", opts)) { + if (!strcmp(buf, "scsi")) + type = IF_SCSI; + else if (!strcmp(buf, "virtio")) { + type = IF_VIRTIO; + } else { + monitor_printf(mon, "type %s not a hotpluggable PCI device.\n", buf); + return NULL; + } + } else { + monitor_printf(mon, "no if= specified\n"); + return NULL; + } + + if (get_param_value(buf, sizeof(buf), "file", opts)) { + dinfo = add_init_drive(opts); + if (!dinfo) + return NULL; + if (dinfo->devaddr) { + monitor_printf(mon, "Parameter addr not supported\n"); + return NULL; + } + } else { + dinfo = NULL; + } + + bus = pci_get_bus_devfn(&devfn, devaddr); + if (!bus) { + monitor_printf(mon, "Invalid PCI device address %s\n", devaddr); + return NULL; + } + if (!((BusState*)bus)->allow_hotplug) { + monitor_printf(mon, "PCI bus doesn't support hotplug\n"); + return NULL; + } + + switch (type) { + case IF_SCSI: + dev = pci_create(bus, devfn, "lsi53c895a"); + if (qdev_init(&dev->qdev) < 0) + dev = NULL; + if (dev && dinfo) { + if (scsi_hot_add(mon, &dev->qdev, dinfo, 0) != 0) { + qdev_unplug(&dev->qdev, NULL); + dev = NULL; + } + } + break; + case IF_VIRTIO: + if (!dinfo) { + monitor_printf(mon, "virtio requires a backing file/device.\n"); + return NULL; + } + dev = pci_create(bus, devfn, "virtio-blk-pci"); + if (qdev_prop_set_drive(&dev->qdev, "drive", dinfo->bdrv) < 0) { + qdev_free(&dev->qdev); + dev = NULL; + break; + } + if (qdev_init(&dev->qdev) < 0) + dev = NULL; + break; + default: + dev = NULL; + } + return dev; +} + +void pci_device_hot_add(Monitor *mon, const QDict *qdict) +{ + PCIDevice *dev = NULL; + const char *pci_addr = qdict_get_str(qdict, "pci_addr"); + const char *type = qdict_get_str(qdict, "type"); + const char *opts = qdict_get_try_str(qdict, "opts"); + + /* strip legacy tag */ + if (!strncmp(pci_addr, "pci_addr=", 9)) { + pci_addr += 9; + } + + if (!opts) { + opts = ""; + } + + if (!strcmp(pci_addr, "auto")) + pci_addr = NULL; + + if (strcmp(type, "nic") == 0) { + dev = qemu_pci_hot_add_nic(mon, pci_addr, opts); + } else if (strcmp(type, "storage") == 0) { + dev = qemu_pci_hot_add_storage(mon, pci_addr, opts); + } else { + monitor_printf(mon, "invalid type: %s\n", type); + } + + if (dev) { + monitor_printf(mon, "OK domain %d, bus %d, slot %d, function %d\n", + pci_find_domain(dev->bus), + pci_bus_num(dev->bus), PCI_SLOT(dev->devfn), + PCI_FUNC(dev->devfn)); + } else + monitor_printf(mon, "failed to add %s\n", opts); +} +#endif + +static int pci_device_hot_remove(Monitor *mon, const char *pci_addr) +{ + PCIDevice *d; + int dom, bus; + unsigned slot; + Error *local_err = NULL; + + if (pci_read_devaddr(mon, pci_addr, &dom, &bus, &slot)) { + return -1; + } + + d = pci_find_device(pci_find_root_bus(dom), bus, PCI_DEVFN(slot, 0)); + if (!d) { + monitor_printf(mon, "slot %d empty\n", slot); + return -1; + } + + qdev_unplug(&d->qdev, &local_err); + if (error_is_set(&local_err)) { + monitor_printf(mon, "%s\n", error_get_pretty(local_err)); + error_free(local_err); + return -1; + } + + return 0; +} + +void do_pci_device_hot_remove(Monitor *mon, const QDict *qdict) +{ + pci_device_hot_remove(mon, qdict_get_str(qdict, "pci_addr")); +} |