diff options
Diffstat (limited to 'hw/pci-host/apb.c')
-rw-r--r-- | hw/pci-host/apb.c | 542 |
1 files changed, 542 insertions, 0 deletions
diff --git a/hw/pci-host/apb.c b/hw/pci-host/apb.c new file mode 100644 index 0000000000..b4981d7005 --- /dev/null +++ b/hw/pci-host/apb.c @@ -0,0 +1,542 @@ +/* + * QEMU Ultrasparc APB PCI host + * + * Copyright (c) 2006 Fabrice Bellard + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/* XXX This file and most of its contents are somewhat misnamed. The + Ultrasparc PCI host is called the PCI Bus Module (PBM). The APB is + the secondary PCI bridge. */ + +#include "hw/sysbus.h" +#include "hw/pci/pci.h" +#include "hw/pci/pci_host.h" +#include "hw/pci/pci_bridge.h" +#include "hw/pci/pci_bus.h" +#include "hw/pci-host/apb.h" +#include "sysemu/sysemu.h" +#include "exec/address-spaces.h" + +/* debug APB */ +//#define DEBUG_APB + +#ifdef DEBUG_APB +#define APB_DPRINTF(fmt, ...) \ +do { printf("APB: " fmt , ## __VA_ARGS__); } while (0) +#else +#define APB_DPRINTF(fmt, ...) +#endif + +/* + * Chipset docs: + * PBM: "UltraSPARC IIi User's Manual", + * http://www.sun.com/processors/manuals/805-0087.pdf + * + * APB: "Advanced PCI Bridge (APB) User's Manual", + * http://www.sun.com/processors/manuals/805-1251.pdf + */ + +#define PBM_PCI_IMR_MASK 0x7fffffff +#define PBM_PCI_IMR_ENABLED 0x80000000 + +#define POR (1 << 31) +#define SOFT_POR (1 << 30) +#define SOFT_XIR (1 << 29) +#define BTN_POR (1 << 28) +#define BTN_XIR (1 << 27) +#define RESET_MASK 0xf8000000 +#define RESET_WCMASK 0x98000000 +#define RESET_WMASK 0x60000000 + +#define MAX_IVEC 0x30 + +typedef struct APBState { + SysBusDevice busdev; + PCIBus *bus; + MemoryRegion apb_config; + MemoryRegion pci_config; + MemoryRegion pci_mmio; + MemoryRegion pci_ioport; + uint32_t iommu[4]; + uint32_t pci_control[16]; + uint32_t pci_irq_map[8]; + uint32_t obio_irq_map[32]; + qemu_irq *pbm_irqs; + qemu_irq *ivec_irqs; + uint32_t reset_control; + unsigned int nr_resets; +} APBState; + +static void pci_apb_set_irq(void *opaque, int irq_num, int level); + +static void apb_config_writel (void *opaque, hwaddr addr, + uint64_t val, unsigned size) +{ + APBState *s = opaque; + + APB_DPRINTF("%s: addr " TARGET_FMT_plx " val %" PRIx64 "\n", __func__, addr, val); + + switch (addr & 0xffff) { + case 0x30 ... 0x4f: /* DMA error registers */ + /* XXX: not implemented yet */ + break; + case 0x200 ... 0x20b: /* IOMMU */ + s->iommu[(addr & 0xf) >> 2] = val; + break; + case 0x20c ... 0x3ff: /* IOMMU flush */ + break; + case 0xc00 ... 0xc3f: /* PCI interrupt control */ + if (addr & 4) { + s->pci_irq_map[(addr & 0x3f) >> 3] &= PBM_PCI_IMR_MASK; + s->pci_irq_map[(addr & 0x3f) >> 3] |= val & ~PBM_PCI_IMR_MASK; + } + break; + case 0x1000 ... 0x1080: /* OBIO interrupt control */ + if (addr & 4) { + s->obio_irq_map[(addr & 0xff) >> 3] &= PBM_PCI_IMR_MASK; + s->obio_irq_map[(addr & 0xff) >> 3] |= val & ~PBM_PCI_IMR_MASK; + } + break; + case 0x1400 ... 0x143f: /* PCI interrupt clear */ + if (addr & 4) { + pci_apb_set_irq(s, (addr & 0x3f) >> 3, 0); + } + break; + case 0x1800 ... 0x1860: /* OBIO interrupt clear */ + if (addr & 4) { + pci_apb_set_irq(s, 0x20 | ((addr & 0xff) >> 3), 0); + } + break; + case 0x2000 ... 0x202f: /* PCI control */ + s->pci_control[(addr & 0x3f) >> 2] = val; + break; + case 0xf020 ... 0xf027: /* Reset control */ + if (addr & 4) { + val &= RESET_MASK; + s->reset_control &= ~(val & RESET_WCMASK); + s->reset_control |= val & RESET_WMASK; + if (val & SOFT_POR) { + s->nr_resets = 0; + qemu_system_reset_request(); + } else if (val & SOFT_XIR) { + qemu_system_reset_request(); + } + } + break; + case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */ + case 0xa400 ... 0xa67f: /* IOMMU diagnostics */ + case 0xa800 ... 0xa80f: /* Interrupt diagnostics */ + case 0xf000 ... 0xf01f: /* FFB config, memory control */ + /* we don't care */ + default: + break; + } +} + +static uint64_t apb_config_readl (void *opaque, + hwaddr addr, unsigned size) +{ + APBState *s = opaque; + uint32_t val; + + switch (addr & 0xffff) { + case 0x30 ... 0x4f: /* DMA error registers */ + val = 0; + /* XXX: not implemented yet */ + break; + case 0x200 ... 0x20b: /* IOMMU */ + val = s->iommu[(addr & 0xf) >> 2]; + break; + case 0x20c ... 0x3ff: /* IOMMU flush */ + val = 0; + break; + case 0xc00 ... 0xc3f: /* PCI interrupt control */ + if (addr & 4) { + val = s->pci_irq_map[(addr & 0x3f) >> 3]; + } else { + val = 0; + } + break; + case 0x1000 ... 0x1080: /* OBIO interrupt control */ + if (addr & 4) { + val = s->obio_irq_map[(addr & 0xff) >> 3]; + } else { + val = 0; + } + break; + case 0x2000 ... 0x202f: /* PCI control */ + val = s->pci_control[(addr & 0x3f) >> 2]; + break; + case 0xf020 ... 0xf027: /* Reset control */ + if (addr & 4) { + val = s->reset_control; + } else { + val = 0; + } + break; + case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */ + case 0xa400 ... 0xa67f: /* IOMMU diagnostics */ + case 0xa800 ... 0xa80f: /* Interrupt diagnostics */ + case 0xf000 ... 0xf01f: /* FFB config, memory control */ + /* we don't care */ + default: + val = 0; + break; + } + APB_DPRINTF("%s: addr " TARGET_FMT_plx " -> %x\n", __func__, addr, val); + + return val; +} + +static const MemoryRegionOps apb_config_ops = { + .read = apb_config_readl, + .write = apb_config_writel, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static void apb_pci_config_write(void *opaque, hwaddr addr, + uint64_t val, unsigned size) +{ + APBState *s = opaque; + + val = qemu_bswap_len(val, size); + APB_DPRINTF("%s: addr " TARGET_FMT_plx " val %" PRIx64 "\n", __func__, addr, val); + pci_data_write(s->bus, addr, val, size); +} + +static uint64_t apb_pci_config_read(void *opaque, hwaddr addr, + unsigned size) +{ + uint32_t ret; + APBState *s = opaque; + + ret = pci_data_read(s->bus, addr, size); + ret = qemu_bswap_len(ret, size); + APB_DPRINTF("%s: addr " TARGET_FMT_plx " -> %x\n", __func__, addr, ret); + return ret; +} + +static void pci_apb_iowriteb (void *opaque, hwaddr addr, + uint32_t val) +{ + cpu_outb(addr & IOPORTS_MASK, val); +} + +static void pci_apb_iowritew (void *opaque, hwaddr addr, + uint32_t val) +{ + cpu_outw(addr & IOPORTS_MASK, bswap16(val)); +} + +static void pci_apb_iowritel (void *opaque, hwaddr addr, + uint32_t val) +{ + cpu_outl(addr & IOPORTS_MASK, bswap32(val)); +} + +static uint32_t pci_apb_ioreadb (void *opaque, hwaddr addr) +{ + uint32_t val; + + val = cpu_inb(addr & IOPORTS_MASK); + return val; +} + +static uint32_t pci_apb_ioreadw (void *opaque, hwaddr addr) +{ + uint32_t val; + + val = bswap16(cpu_inw(addr & IOPORTS_MASK)); + return val; +} + +static uint32_t pci_apb_ioreadl (void *opaque, hwaddr addr) +{ + uint32_t val; + + val = bswap32(cpu_inl(addr & IOPORTS_MASK)); + return val; +} + +static const MemoryRegionOps pci_ioport_ops = { + .old_mmio = { + .read = { pci_apb_ioreadb, pci_apb_ioreadw, pci_apb_ioreadl }, + .write = { pci_apb_iowriteb, pci_apb_iowritew, pci_apb_iowritel, }, + }, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +/* The APB host has an IRQ line for each IRQ line of each slot. */ +static int pci_apb_map_irq(PCIDevice *pci_dev, int irq_num) +{ + return ((pci_dev->devfn & 0x18) >> 1) + irq_num; +} + +static int pci_pbm_map_irq(PCIDevice *pci_dev, int irq_num) +{ + int bus_offset; + if (pci_dev->devfn & 1) + bus_offset = 16; + else + bus_offset = 0; + return bus_offset + irq_num; +} + +static void pci_apb_set_irq(void *opaque, int irq_num, int level) +{ + APBState *s = opaque; + + /* PCI IRQ map onto the first 32 INO. */ + if (irq_num < 32) { + if (s->pci_irq_map[irq_num >> 2] & PBM_PCI_IMR_ENABLED) { + APB_DPRINTF("%s: set irq %d level %d\n", __func__, irq_num, level); + qemu_set_irq(s->ivec_irqs[irq_num], level); + } else { + APB_DPRINTF("%s: not enabled: lower irq %d\n", __func__, irq_num); + qemu_irq_lower(s->ivec_irqs[irq_num]); + } + } else { + /* OBIO IRQ map onto the next 16 INO. */ + if (s->obio_irq_map[irq_num - 32] & PBM_PCI_IMR_ENABLED) { + APB_DPRINTF("%s: set irq %d level %d\n", __func__, irq_num, level); + qemu_set_irq(s->ivec_irqs[irq_num], level); + } else { + APB_DPRINTF("%s: not enabled: lower irq %d\n", __func__, irq_num); + qemu_irq_lower(s->ivec_irqs[irq_num]); + } + } +} + +static int apb_pci_bridge_initfn(PCIDevice *dev) +{ + int rc; + + rc = pci_bridge_initfn(dev, TYPE_PCI_BUS); + if (rc < 0) { + return rc; + } + + /* + * command register: + * According to PCI bridge spec, after reset + * bus master bit is off + * memory space enable bit is off + * According to manual (805-1251.pdf). + * the reset value should be zero unless the boot pin is tied high + * (which is true) and thus it should be PCI_COMMAND_MEMORY. + */ + pci_set_word(dev->config + PCI_COMMAND, + PCI_COMMAND_MEMORY); + pci_set_word(dev->config + PCI_STATUS, + PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ | + PCI_STATUS_DEVSEL_MEDIUM); + return 0; +} + +PCIBus *pci_apb_init(hwaddr special_base, + hwaddr mem_base, + qemu_irq *ivec_irqs, PCIBus **bus2, PCIBus **bus3, + qemu_irq **pbm_irqs) +{ + DeviceState *dev; + SysBusDevice *s; + APBState *d; + PCIDevice *pci_dev; + PCIBridge *br; + + /* Ultrasparc PBM main bus */ + dev = qdev_create(NULL, "pbm"); + qdev_init_nofail(dev); + s = SYS_BUS_DEVICE(dev); + /* apb_config */ + sysbus_mmio_map(s, 0, special_base); + /* PCI configuration space */ + sysbus_mmio_map(s, 1, special_base + 0x1000000ULL); + /* pci_ioport */ + sysbus_mmio_map(s, 2, special_base + 0x2000000ULL); + d = FROM_SYSBUS(APBState, s); + + memory_region_init(&d->pci_mmio, "pci-mmio", 0x100000000ULL); + memory_region_add_subregion(get_system_memory(), mem_base, &d->pci_mmio); + + d->bus = pci_register_bus(&d->busdev.qdev, "pci", + pci_apb_set_irq, pci_pbm_map_irq, d, + &d->pci_mmio, + get_system_io(), + 0, 32, TYPE_PCI_BUS); + + *pbm_irqs = d->pbm_irqs; + d->ivec_irqs = ivec_irqs; + + pci_create_simple(d->bus, 0, "pbm-pci"); + + /* APB secondary busses */ + pci_dev = pci_create_multifunction(d->bus, PCI_DEVFN(1, 0), true, + "pbm-bridge"); + br = DO_UPCAST(PCIBridge, dev, pci_dev); + pci_bridge_map_irq(br, "Advanced PCI Bus secondary bridge 1", + pci_apb_map_irq); + qdev_init_nofail(&pci_dev->qdev); + *bus2 = pci_bridge_get_sec_bus(br); + + pci_dev = pci_create_multifunction(d->bus, PCI_DEVFN(1, 1), true, + "pbm-bridge"); + br = DO_UPCAST(PCIBridge, dev, pci_dev); + pci_bridge_map_irq(br, "Advanced PCI Bus secondary bridge 2", + pci_apb_map_irq); + qdev_init_nofail(&pci_dev->qdev); + *bus3 = pci_bridge_get_sec_bus(br); + + return d->bus; +} + +static void pci_pbm_reset(DeviceState *d) +{ + unsigned int i; + APBState *s = container_of(d, APBState, busdev.qdev); + + for (i = 0; i < 8; i++) { + s->pci_irq_map[i] &= PBM_PCI_IMR_MASK; + } + for (i = 0; i < 32; i++) { + s->obio_irq_map[i] &= PBM_PCI_IMR_MASK; + } + + if (s->nr_resets++ == 0) { + /* Power on reset */ + s->reset_control = POR; + } +} + +static const MemoryRegionOps pci_config_ops = { + .read = apb_pci_config_read, + .write = apb_pci_config_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static int pci_pbm_init_device(SysBusDevice *dev) +{ + APBState *s; + unsigned int i; + + s = FROM_SYSBUS(APBState, dev); + for (i = 0; i < 8; i++) { + s->pci_irq_map[i] = (0x1f << 6) | (i << 2); + } + for (i = 0; i < 32; i++) { + s->obio_irq_map[i] = ((0x1f << 6) | 0x20) + i; + } + s->pbm_irqs = qemu_allocate_irqs(pci_apb_set_irq, s, MAX_IVEC); + + /* apb_config */ + memory_region_init_io(&s->apb_config, &apb_config_ops, s, "apb-config", + 0x10000); + /* at region 0 */ + sysbus_init_mmio(dev, &s->apb_config); + + memory_region_init_io(&s->pci_config, &pci_config_ops, s, "apb-pci-config", + 0x1000000); + /* at region 1 */ + sysbus_init_mmio(dev, &s->pci_config); + + /* pci_ioport */ + memory_region_init_io(&s->pci_ioport, &pci_ioport_ops, s, + "apb-pci-ioport", 0x10000); + /* at region 2 */ + sysbus_init_mmio(dev, &s->pci_ioport); + + return 0; +} + +static int pbm_pci_host_init(PCIDevice *d) +{ + pci_set_word(d->config + PCI_COMMAND, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + pci_set_word(d->config + PCI_STATUS, + PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ | + PCI_STATUS_DEVSEL_MEDIUM); + return 0; +} + +static void pbm_pci_host_class_init(ObjectClass *klass, void *data) +{ + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); + + k->init = pbm_pci_host_init; + k->vendor_id = PCI_VENDOR_ID_SUN; + k->device_id = PCI_DEVICE_ID_SUN_SABRE; + k->class_id = PCI_CLASS_BRIDGE_HOST; +} + +static const TypeInfo pbm_pci_host_info = { + .name = "pbm-pci", + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PCIDevice), + .class_init = pbm_pci_host_class_init, +}; + +static void pbm_host_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); + + k->init = pci_pbm_init_device; + dc->reset = pci_pbm_reset; +} + +static const TypeInfo pbm_host_info = { + .name = "pbm", + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(APBState), + .class_init = pbm_host_class_init, +}; + +static void pbm_pci_bridge_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); + + k->init = apb_pci_bridge_initfn; + k->exit = pci_bridge_exitfn; + k->vendor_id = PCI_VENDOR_ID_SUN; + k->device_id = PCI_DEVICE_ID_SUN_SIMBA; + k->revision = 0x11; + k->config_write = pci_bridge_write_config; + k->is_bridge = 1; + dc->reset = pci_bridge_reset; + dc->vmsd = &vmstate_pci_device; +} + +static const TypeInfo pbm_pci_bridge_info = { + .name = "pbm-bridge", + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PCIBridge), + .class_init = pbm_pci_bridge_class_init, +}; + +static void pbm_register_types(void) +{ + type_register_static(&pbm_host_info); + type_register_static(&pbm_pci_host_info); + type_register_static(&pbm_pci_bridge_info); +} + +type_init(pbm_register_types) |