aboutsummaryrefslogtreecommitdiff
path: root/hw/misc/vfio.c
diff options
context:
space:
mode:
Diffstat (limited to 'hw/misc/vfio.c')
-rw-r--r--hw/misc/vfio.c657
1 files changed, 321 insertions, 336 deletions
diff --git a/hw/misc/vfio.c b/hw/misc/vfio.c
index 540c377f61..95baad825b 100644
--- a/hw/misc/vfio.c
+++ b/hw/misc/vfio.c
@@ -59,8 +59,23 @@ typedef struct VFIOQuirk {
MemoryRegion mem;
struct VFIODevice *vdev;
QLIST_ENTRY(VFIOQuirk) next;
- uint32_t data;
- uint32_t data2;
+ struct {
+ uint32_t base_offset:TARGET_PAGE_BITS;
+ uint32_t address_offset:TARGET_PAGE_BITS;
+ uint32_t address_size:3;
+ uint32_t bar:3;
+
+ uint32_t address_match;
+ uint32_t address_mask;
+
+ uint32_t address_val:TARGET_PAGE_BITS;
+ uint32_t data_offset:TARGET_PAGE_BITS;
+ uint32_t data_size:3;
+
+ uint8_t flags;
+ uint8_t read_flags;
+ uint8_t write_flags;
+ } data;
} VFIOQuirk;
typedef struct VFIOBAR {
@@ -72,6 +87,8 @@ typedef struct VFIOBAR {
size_t size;
uint32_t flags; /* VFIO region flags (rd/wr/mmap) */
uint8_t nr; /* cache the BAR number for debug */
+ bool ioport;
+ bool mem64;
QLIST_HEAD(, VFIOQuirk) quirks;
} VFIOBAR;
@@ -1097,251 +1114,315 @@ static const MemoryRegionOps vfio_vga_ops = {
* Device specific quirks
*/
-#define PCI_VENDOR_ID_ATI 0x1002
+/* Is range1 fully contained within range2? */
+static bool vfio_range_contained(uint64_t first1, uint64_t len1,
+ uint64_t first2, uint64_t len2) {
+ return (first1 >= first2 && first1 + len1 <= first2 + len2);
+}
-/*
- * Device 1002:68f9 (Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon
- * HD 5450/6350]) reports the upper byte of the physical address of the
- * I/O port BAR4 through VGA register 0x3c3. The BAR is 256 bytes, so the
- * lower byte is known to be zero. Probing for this quirk reads 0xff from
- * port 0x3c3 on some devices so we store the physical address and replace
- * reads with the virtual address any time it matches. XXX Research when
- * to enable quirk.
- */
-static uint64_t vfio_ati_3c3_quirk_read(void *opaque,
- hwaddr addr, unsigned size)
+static bool vfio_flags_enabled(uint8_t flags, uint8_t mask)
+{
+ return (mask && (flags & mask) == mask);
+}
+
+static uint64_t vfio_generic_window_quirk_read(void *opaque,
+ hwaddr addr, unsigned size)
{
VFIOQuirk *quirk = opaque;
VFIODevice *vdev = quirk->vdev;
- PCIDevice *pdev = &vdev->pdev;
- uint64_t data = vfio_vga_read(&vdev->vga.region[QEMU_PCI_VGA_IO_HI],
- addr + 0x3, size);
+ uint64_t data;
- if (data == quirk->data) {
- data = pci_get_byte(pdev->config + PCI_BASE_ADDRESS_4 + 1);
- DPRINTF("%s(0x3c3, 1) = 0x%"PRIx64"\n", __func__, data);
+ if (vfio_flags_enabled(quirk->data.flags, quirk->data.read_flags) &&
+ ranges_overlap(addr, size,
+ quirk->data.data_offset, quirk->data.data_size)) {
+ hwaddr offset = addr - quirk->data.data_offset;
+
+ if (!vfio_range_contained(addr, size, quirk->data.data_offset,
+ quirk->data.data_size)) {
+ hw_error("%s: window data read not fully contained: %s\n",
+ __func__, memory_region_name(&quirk->mem));
+ }
+
+ data = vfio_pci_read_config(&vdev->pdev,
+ quirk->data.address_val + offset, size);
+
+ DPRINTF("%s read(%04x:%02x:%02x.%x:BAR%d+0x%"HWADDR_PRIx", %d) = 0x%"
+ PRIx64"\n", memory_region_name(&quirk->mem), vdev->host.domain,
+ vdev->host.bus, vdev->host.slot, vdev->host.function,
+ quirk->data.bar, addr, size, data);
+ } else {
+ data = vfio_bar_read(&vdev->bars[quirk->data.bar],
+ addr + quirk->data.base_offset, size);
}
return data;
}
-static const MemoryRegionOps vfio_ati_3c3_quirk = {
- .read = vfio_ati_3c3_quirk_read,
- .endianness = DEVICE_LITTLE_ENDIAN,
-};
-
-static void vfio_vga_probe_ati_3c3_quirk(VFIODevice *vdev)
+static void vfio_generic_window_quirk_write(void *opaque, hwaddr addr,
+ uint64_t data, unsigned size)
{
- PCIDevice *pdev = &vdev->pdev;
- off_t physoffset = vdev->config_offset + PCI_BASE_ADDRESS_4;
- uint32_t physbar;
- VFIOQuirk *quirk;
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
- if (pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_ATI ||
- vdev->bars[4].size < 256) {
- return;
- }
+ if (ranges_overlap(addr, size,
+ quirk->data.address_offset, quirk->data.address_size)) {
- /* Get I/O port BAR physical address */
- if (pread(vdev->fd, &physbar, 4, physoffset) != 4) {
- error_report("vfio: probe failed for ATI/AMD 0x3c3 quirk on device "
- "%04x:%02x:%02x.%x", vdev->host.domain,
- vdev->host.bus, vdev->host.slot, vdev->host.function);
- return;
+ if (addr != quirk->data.address_offset) {
+ hw_error("%s: offset write into address window: %s\n",
+ __func__, memory_region_name(&quirk->mem));
+ }
+
+ if ((data & ~quirk->data.address_mask) == quirk->data.address_match) {
+ quirk->data.flags |= quirk->data.write_flags |
+ quirk->data.read_flags;
+ quirk->data.address_val = data & quirk->data.address_mask;
+ } else {
+ quirk->data.flags &= ~(quirk->data.write_flags |
+ quirk->data.read_flags);
+ }
}
- quirk = g_malloc0(sizeof(*quirk));
- quirk->vdev = vdev;
- quirk->data = (physbar >> 8) & 0xff;
+ if (vfio_flags_enabled(quirk->data.flags, quirk->data.write_flags) &&
+ ranges_overlap(addr, size,
+ quirk->data.data_offset, quirk->data.data_size)) {
+ hwaddr offset = addr - quirk->data.data_offset;
- memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_ati_3c3_quirk, quirk,
- "vfio-ati-3c3-quirk", 1);
- memory_region_add_subregion(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].mem, 3,
- &quirk->mem);
+ if (!vfio_range_contained(addr, size, quirk->data.data_offset,
+ quirk->data.data_size)) {
+ hw_error("%s: window data write not fully contained: %s\n",
+ __func__, memory_region_name(&quirk->mem));
+ }
- QLIST_INSERT_HEAD(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].quirks,
- quirk, next);
+ vfio_pci_write_config(&vdev->pdev,
+ quirk->data.address_val + offset, data, size);
+ DPRINTF("%s write(%04x:%02x:%02x.%x:BAR%d+0x%"HWADDR_PRIx", 0x%"
+ PRIx64", %d)\n", memory_region_name(&quirk->mem),
+ vdev->host.domain, vdev->host.bus, vdev->host.slot,
+ vdev->host.function, quirk->data.bar, addr, data, size);
+ return;
+ }
- DPRINTF("Enabled ATI/AMD quirk 0x3c3 for device %04x:%02x:%02x.%x\n",
- vdev->host.domain, vdev->host.bus, vdev->host.slot,
- vdev->host.function);
+ vfio_bar_write(&vdev->bars[quirk->data.bar],
+ addr + quirk->data.base_offset, data, size);
}
-/*
- * Device 1002:68f9 (Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon
- * HD 5450/6350]) reports the physical address of MMIO BAR0 through a
- * write/read operation on I/O port BAR4. When uint32_t 0x4010 is written
- * to offset 0x0, the subsequent read from offset 0x4 returns the contents
- * of BAR0. Test for this quirk on all ATI/AMD devices. XXX - Note that
- * 0x10 is the offset of BAR0 in config sapce, is this a window to all of
- * config space?
- */
-static uint64_t vfio_ati_4010_quirk_read(void *opaque,
- hwaddr addr, unsigned size)
+static const MemoryRegionOps vfio_generic_window_quirk = {
+ .read = vfio_generic_window_quirk_read,
+ .write = vfio_generic_window_quirk_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static uint64_t vfio_generic_quirk_read(void *opaque,
+ hwaddr addr, unsigned size)
{
VFIOQuirk *quirk = opaque;
VFIODevice *vdev = quirk->vdev;
- PCIDevice *pdev = &vdev->pdev;
- uint64_t data = vfio_bar_read(&vdev->bars[4], addr, size);
+ hwaddr base = quirk->data.address_match & TARGET_PAGE_MASK;
+ hwaddr offset = quirk->data.address_match & ~TARGET_PAGE_MASK;
+ uint64_t data;
- if (addr == 4 && size == 4 && quirk->data) {
- data = pci_get_long(pdev->config + PCI_BASE_ADDRESS_0);
- DPRINTF("%s(BAR4+0x4) = 0x%"PRIx64"\n", __func__, data);
- }
+ if (vfio_flags_enabled(quirk->data.flags, quirk->data.read_flags) &&
+ ranges_overlap(addr, size, offset, quirk->data.address_mask + 1)) {
+ if (!vfio_range_contained(addr, size, offset,
+ quirk->data.address_mask + 1)) {
+ hw_error("%s: read not fully contained: %s\n",
+ __func__, memory_region_name(&quirk->mem));
+ }
- quirk->data = 0;
+ data = vfio_pci_read_config(&vdev->pdev, addr - offset, size);
+
+ DPRINTF("%s read(%04x:%02x:%02x.%x:BAR%d+0x%"HWADDR_PRIx", %d) = 0x%"
+ PRIx64"\n", memory_region_name(&quirk->mem), vdev->host.domain,
+ vdev->host.bus, vdev->host.slot, vdev->host.function,
+ quirk->data.bar, addr + base, size, data);
+ } else {
+ data = vfio_bar_read(&vdev->bars[quirk->data.bar], addr + base, size);
+ }
return data;
}
-static void vfio_ati_4010_quirk_write(void *opaque, hwaddr addr,
- uint64_t data, unsigned size)
+static void vfio_generic_quirk_write(void *opaque, hwaddr addr,
+ uint64_t data, unsigned size)
{
VFIOQuirk *quirk = opaque;
VFIODevice *vdev = quirk->vdev;
+ hwaddr base = quirk->data.address_match & TARGET_PAGE_MASK;
+ hwaddr offset = quirk->data.address_match & ~TARGET_PAGE_MASK;
+
+ if (vfio_flags_enabled(quirk->data.flags, quirk->data.write_flags) &&
+ ranges_overlap(addr, size, offset, quirk->data.address_mask + 1)) {
+ if (!vfio_range_contained(addr, size, offset,
+ quirk->data.address_mask + 1)) {
+ hw_error("%s: write not fully contained: %s\n",
+ __func__, memory_region_name(&quirk->mem));
+ }
- vfio_bar_write(&vdev->bars[4], addr, data, size);
+ vfio_pci_write_config(&vdev->pdev, addr - offset, data, size);
- quirk->data = (addr == 0 && size == 4 && data == 0x4010) ? 1 : 0;
+ DPRINTF("%s write(%04x:%02x:%02x.%x:BAR%d+0x%"HWADDR_PRIx", 0x%"
+ PRIx64", %d)\n", memory_region_name(&quirk->mem),
+ vdev->host.domain, vdev->host.bus, vdev->host.slot,
+ vdev->host.function, quirk->data.bar, addr + base, data, size);
+ } else {
+ vfio_bar_write(&vdev->bars[quirk->data.bar], addr + base, data, size);
+ }
}
-static const MemoryRegionOps vfio_ati_4010_quirk = {
- .read = vfio_ati_4010_quirk_read,
- .write = vfio_ati_4010_quirk_write,
+static const MemoryRegionOps vfio_generic_quirk = {
+ .read = vfio_generic_quirk_read,
+ .write = vfio_generic_quirk_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
-static void vfio_probe_ati_4010_quirk(VFIODevice *vdev, int nr)
+#define PCI_VENDOR_ID_ATI 0x1002
+
+/*
+ * Radeon HD cards (HD5450 & HD7850) report the upper byte of the I/O port BAR
+ * through VGA register 0x3c3. On newer cards, the I/O port BAR is always
+ * BAR4 (older cards like the X550 used BAR1, but we don't care to support
+ * those). Note that on bare metal, a read of 0x3c3 doesn't always return the
+ * I/O port BAR address. Originally this was coded to return the virtual BAR
+ * address only if the physical register read returns the actual BAR address,
+ * but users have reported greater success if we return the virtual address
+ * unconditionally.
+ */
+static uint64_t vfio_ati_3c3_quirk_read(void *opaque,
+ hwaddr addr, unsigned size)
+{
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
+ uint64_t data = vfio_pci_read_config(&vdev->pdev,
+ PCI_BASE_ADDRESS_0 + (4 * 4) + 1,
+ size);
+ DPRINTF("%s(0x3c3, 1) = 0x%"PRIx64"\n", __func__, data);
+
+ return data;
+}
+
+static const MemoryRegionOps vfio_ati_3c3_quirk = {
+ .read = vfio_ati_3c3_quirk_read,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void vfio_vga_probe_ati_3c3_quirk(VFIODevice *vdev)
{
PCIDevice *pdev = &vdev->pdev;
- off_t physoffset = vdev->config_offset + PCI_BASE_ADDRESS_0;
- uint32_t physbar0;
- uint64_t data;
VFIOQuirk *quirk;
- if (!vdev->has_vga || nr != 4 || !vdev->bars[0].size ||
- pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_ATI) {
- return;
- }
-
- /* Get I/O port BAR physical address */
- if (pread(vdev->fd, &physbar0, 4, physoffset) != 4) {
- error_report("vfio: probe failed for ATI/AMD 0x4010 quirk on device "
- "%04x:%02x:%02x.%x", vdev->host.domain,
- vdev->host.bus, vdev->host.slot, vdev->host.function);
+ if (pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_ATI) {
return;
}
- /* Write 0x4010 to I/O port BAR offset 0 */
- vfio_bar_write(&vdev->bars[4], 0, 0x4010, 4);
- /* Read back result */
- data = vfio_bar_read(&vdev->bars[4], 4, 4);
-
- /* If the register matches the physical address of BAR0, we need a quirk */
- if (data != physbar0) {
+ /*
+ * As long as the BAR is >= 256 bytes it will be aligned such that the
+ * lower byte is always zero. Filter out anything else, if it exists.
+ */
+ if (!vdev->bars[4].ioport || vdev->bars[4].size < 256) {
return;
}
quirk = g_malloc0(sizeof(*quirk));
quirk->vdev = vdev;
- memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_ati_4010_quirk, quirk,
- "vfio-ati-4010-quirk", 8);
- memory_region_add_subregion_overlap(&vdev->bars[nr].mem, 0, &quirk->mem, 1);
+ memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_ati_3c3_quirk, quirk,
+ "vfio-ati-3c3-quirk", 1);
+ memory_region_add_subregion(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].mem,
+ 3 /* offset 3 bytes from 0x3c0 */, &quirk->mem);
- QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
+ QLIST_INSERT_HEAD(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].quirks,
+ quirk, next);
- DPRINTF("Enabled ATI/AMD quirk 0x4010 for device %04x:%02x:%02x.%x\n",
+ DPRINTF("Enabled ATI/AMD quirk 0x3c3 BAR4for device %04x:%02x:%02x.%x\n",
vdev->host.domain, vdev->host.bus, vdev->host.slot,
vdev->host.function);
}
/*
- * Device 1002:5b63 (Advanced Micro Devices [AMD] nee ATI RV370 [Radeon X550])
- * retrieves the upper half of the MMIO BAR0 physical address by writing
- * 0xf10 to I/O port BAR1 offset 0 and reading the result from offset 6.
- * XXX - 0x10 is the offset of BAR0 in PCI config space, this could provide
- * full access to config space. Config space is little endian, so the data
- * register probably starts at 0x4.
+ * Newer ATI/AMD devices, including HD5450 and HD7850, have a window to PCI
+ * config space through MMIO BAR2 at offset 0x4000. Nothing seems to access
+ * the MMIO space directly, but a window to this space is provided through
+ * I/O port BAR4. Offset 0x0 is the address register and offset 0x4 is the
+ * data register. When the address is programmed to a range of 0x4000-0x4fff
+ * PCI configuration space is available. Experimentation seems to indicate
+ * that only read-only access is provided, but we drop writes when the window
+ * is enabled to config space nonetheless.
*/
-static uint64_t vfio_ati_f10_quirk_read(void *opaque,
- hwaddr addr, unsigned size)
+static void vfio_probe_ati_bar4_window_quirk(VFIODevice *vdev, int nr)
{
- VFIOQuirk *quirk = opaque;
- VFIODevice *vdev = quirk->vdev;
PCIDevice *pdev = &vdev->pdev;
- uint64_t data = vfio_bar_read(&vdev->bars[1], addr, size);
+ VFIOQuirk *quirk;
- if (addr == 6 && size == 2 && quirk->data) {
- data = pci_get_word(pdev->config + PCI_BASE_ADDRESS_0 + 2);
- DPRINTF("%s(BAR1+0x6) = 0x%"PRIx64"\n", __func__, data);
+ if (!vdev->has_vga || nr != 4 ||
+ pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_ATI) {
+ return;
}
- quirk->data = 0;
-
- return data;
-}
-
-static void vfio_ati_f10_quirk_write(void *opaque, hwaddr addr,
- uint64_t data, unsigned size)
-{
- VFIOQuirk *quirk = opaque;
- VFIODevice *vdev = quirk->vdev;
+ quirk = g_malloc0(sizeof(*quirk));
+ quirk->vdev = vdev;
+ quirk->data.address_size = 4;
+ quirk->data.data_offset = 4;
+ quirk->data.data_size = 4;
+ quirk->data.address_match = 0x4000;
+ quirk->data.address_mask = PCIE_CONFIG_SPACE_SIZE - 1;
+ quirk->data.bar = nr;
+ quirk->data.read_flags = quirk->data.write_flags = 1;
+
+ memory_region_init_io(&quirk->mem, OBJECT(vdev),
+ &vfio_generic_window_quirk, quirk,
+ "vfio-ati-bar4-window-quirk", 8);
+ memory_region_add_subregion_overlap(&vdev->bars[nr].mem,
+ quirk->data.base_offset, &quirk->mem, 1);
- vfio_bar_write(&vdev->bars[1], addr, data, size);
+ QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
- quirk->data = (addr == 0 && size == 4 && data == 0xf10) ? 1 : 0;
+ DPRINTF("Enabled ATI/AMD BAR4 window quirk for device %04x:%02x:%02x.%x\n",
+ vdev->host.domain, vdev->host.bus, vdev->host.slot,
+ vdev->host.function);
}
-static const MemoryRegionOps vfio_ati_f10_quirk = {
- .read = vfio_ati_f10_quirk_read,
- .write = vfio_ati_f10_quirk_write,
- .endianness = DEVICE_LITTLE_ENDIAN,
-};
-
-static void vfio_probe_ati_f10_quirk(VFIODevice *vdev, int nr)
+/*
+ * Trap the BAR2 MMIO window to config space as well.
+ */
+static void vfio_probe_ati_bar2_4000_quirk(VFIODevice *vdev, int nr)
{
PCIDevice *pdev = &vdev->pdev;
- off_t physoffset = vdev->config_offset + PCI_BASE_ADDRESS_0;
- uint32_t physbar0;
- uint64_t data;
VFIOQuirk *quirk;
- if (!vdev->has_vga || nr != 1 || !vdev->bars[0].size ||
+ /* Only enable on newer devices where BAR2 is 64bit */
+ if (!vdev->has_vga || nr != 2 || !vdev->bars[2].mem64 ||
pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_ATI) {
return;
}
- /* Get I/O port BAR physical address */
- if (pread(vdev->fd, &physbar0, 4, physoffset) != 4) {
- error_report("vfio: probe failed for ATI/AMD 0xf10 quirk on device "
- "%04x:%02x:%02x.%x", vdev->host.domain,
- vdev->host.bus, vdev->host.slot, vdev->host.function);
- return;
- }
-
- vfio_bar_write(&vdev->bars[1], 0, 0xf10, 4);
- data = vfio_bar_read(&vdev->bars[1], 0x6, 2);
-
- /* If the register matches the physical address of BAR0, we need a quirk */
- if (data != (le32_to_cpu(physbar0) >> 16)) {
- return;
- }
-
quirk = g_malloc0(sizeof(*quirk));
quirk->vdev = vdev;
-
- memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_ati_f10_quirk, quirk,
- "vfio-ati-f10-quirk", 8);
- memory_region_add_subregion_overlap(&vdev->bars[nr].mem, 0, &quirk->mem, 1);
+ quirk->data.flags = quirk->data.read_flags = quirk->data.write_flags = 1;
+ quirk->data.address_match = 0x4000;
+ quirk->data.address_mask = PCIE_CONFIG_SPACE_SIZE - 1;
+ quirk->data.bar = nr;
+
+ memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_generic_quirk, quirk,
+ "vfio-ati-bar2-4000-quirk",
+ TARGET_PAGE_ALIGN(quirk->data.address_mask + 1));
+ memory_region_add_subregion_overlap(&vdev->bars[nr].mem,
+ quirk->data.address_match & TARGET_PAGE_MASK,
+ &quirk->mem, 1);
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
- DPRINTF("Enabled ATI/AMD quirk 0xf10 for device %04x:%02x:%02x.%x\n",
+ DPRINTF("Enabled ATI/AMD BAR2 0x4000 quirk for device %04x:%02x:%02x.%x\n",
vdev->host.domain, vdev->host.bus, vdev->host.slot,
vdev->host.function);
}
+/*
+ * Older ATI/AMD cards like the X550 have a similar window to that above.
+ * I/O port BAR1 provides a window to a mirror of PCI config space located
+ * in BAR2 at offset 0xf00. We don't care to support such older cards, but
+ * note it for future reference.
+ */
+
#define PCI_VENDOR_ID_NVIDIA 0x10de
/*
@@ -1360,7 +1441,7 @@ static void vfio_probe_ati_f10_quirk(VFIODevice *vdev, int nr)
* that use the I/O port BAR5 window but it doesn't hurt to leave it.
*/
enum {
- NV_3D0_NONE,
+ NV_3D0_NONE = 0,
NV_3D0_SELECT,
NV_3D0_WINDOW,
NV_3D0_READ,
@@ -1374,14 +1455,14 @@ static uint64_t vfio_nvidia_3d0_quirk_read(void *opaque,
VFIODevice *vdev = quirk->vdev;
PCIDevice *pdev = &vdev->pdev;
uint64_t data = vfio_vga_read(&vdev->vga.region[QEMU_PCI_VGA_IO_HI],
- addr + 0x10, size);
+ addr + quirk->data.base_offset, size);
- if (quirk->data == NV_3D0_READ && addr == 0) {
- data = vfio_pci_read_config(pdev, quirk->data2, size);
+ if (quirk->data.flags == NV_3D0_READ && addr == quirk->data.data_offset) {
+ data = vfio_pci_read_config(pdev, quirk->data.address_val, size);
DPRINTF("%s(0x3d0, %d) = 0x%"PRIx64"\n", __func__, size, data);
}
- quirk->data = NV_3D0_NONE;
+ quirk->data.flags = NV_3D0_NONE;
return data;
}
@@ -1393,43 +1474,42 @@ static void vfio_nvidia_3d0_quirk_write(void *opaque, hwaddr addr,
VFIODevice *vdev = quirk->vdev;
PCIDevice *pdev = &vdev->pdev;
- switch (quirk->data) {
+ switch (quirk->data.flags) {
case NV_3D0_NONE:
- if (addr == 4 && data == 0x338) {
- quirk->data = NV_3D0_SELECT;
+ if (addr == quirk->data.address_offset && data == 0x338) {
+ quirk->data.flags = NV_3D0_SELECT;
}
break;
case NV_3D0_SELECT:
- quirk->data = NV_3D0_NONE;
- if (addr == 0 && (data & ~0xff) == 0x1800) {
- quirk->data = NV_3D0_WINDOW;
- quirk->data2 = data & 0xff;
+ quirk->data.flags = NV_3D0_NONE;
+ if (addr == quirk->data.data_offset &&
+ (data & ~quirk->data.address_mask) == quirk->data.address_match) {
+ quirk->data.flags = NV_3D0_WINDOW;
+ quirk->data.address_val = data & quirk->data.address_mask;
}
break;
case NV_3D0_WINDOW:
- quirk->data = NV_3D0_NONE;
- if (addr == 4) {
+ quirk->data.flags = NV_3D0_NONE;
+ if (addr == quirk->data.address_offset) {
if (data == 0x538) {
- quirk->data = NV_3D0_READ;
+ quirk->data.flags = NV_3D0_READ;
} else if (data == 0x738) {
- quirk->data = NV_3D0_WRITE;
+ quirk->data.flags = NV_3D0_WRITE;
}
}
break;
case NV_3D0_WRITE:
- quirk->data = NV_3D0_NONE;
- if (addr == 0) {
- vfio_pci_write_config(pdev, quirk->data2, data, size);
+ quirk->data.flags = NV_3D0_NONE;
+ if (addr == quirk->data.data_offset) {
+ vfio_pci_write_config(pdev, quirk->data.address_val, data, size);
DPRINTF("%s(0x3d0, 0x%"PRIx64", %d)\n", __func__, data, size);
return;
}
break;
- default:
- quirk->data = NV_3D0_NONE;
}
vfio_vga_write(&vdev->vga.region[QEMU_PCI_VGA_IO_HI],
- addr + 0x10, data, size);
+ addr + quirk->data.base_offset, data, size);
}
static const MemoryRegionOps vfio_nvidia_3d0_quirk = {
@@ -1450,11 +1530,18 @@ static void vfio_vga_probe_nvidia_3d0_quirk(VFIODevice *vdev)
quirk = g_malloc0(sizeof(*quirk));
quirk->vdev = vdev;
-
- memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_nvidia_3d0_quirk, quirk,
- "vfio-nvidia-3d0-quirk", 6);
+ quirk->data.base_offset = 0x10;
+ quirk->data.address_offset = 4;
+ quirk->data.address_size = 2;
+ quirk->data.address_match = 0x1800;
+ quirk->data.address_mask = PCI_CONFIG_SPACE_SIZE - 1;
+ quirk->data.data_offset = 0;
+ quirk->data.data_size = 4;
+
+ memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_nvidia_3d0_quirk,
+ quirk, "vfio-nvidia-3d0-quirk", 6);
memory_region_add_subregion(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].mem,
- 0x10, &quirk->mem);
+ quirk->data.base_offset, &quirk->mem);
QLIST_INSERT_HEAD(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].quirks,
quirk, next);
@@ -1478,76 +1565,46 @@ enum {
NV_BAR5_VALID = 0x7,
};
-static uint64_t vfio_nvidia_bar5_window_quirk_read(void *opaque,
- hwaddr addr, unsigned size)
-{
- VFIOQuirk *quirk = opaque;
- VFIODevice *vdev = quirk->vdev;
- uint64_t data = vfio_bar_read(&vdev->bars[5], addr, size);
-
- if (addr == 0xc && quirk->data == NV_BAR5_VALID) {
- data = vfio_pci_read_config(&vdev->pdev, quirk->data2, size);
- DPRINTF("%s(%04x:%02x:%02x.%x:BAR5+0x%"HWADDR_PRIx", %d) = 0x%"
- PRIx64"\n", __func__, vdev->host.domain, vdev->host.bus,
- vdev->host.slot, vdev->host.function, addr, size, data);
- }
-
- return data;
-}
-
static void vfio_nvidia_bar5_window_quirk_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
VFIOQuirk *quirk = opaque;
- VFIODevice *vdev = quirk->vdev;
- /*
- * Use quirk->data to track enables and quirk->data2 for the offset
- */
switch (addr) {
case 0x0:
if (data & 0x1) {
- quirk->data |= NV_BAR5_MASTER;
+ quirk->data.flags |= NV_BAR5_MASTER;
} else {
- quirk->data &= ~NV_BAR5_MASTER;
+ quirk->data.flags &= ~NV_BAR5_MASTER;
}
break;
case 0x4:
if (data & 0x1) {
- quirk->data |= NV_BAR5_ENABLE;
+ quirk->data.flags |= NV_BAR5_ENABLE;
} else {
- quirk->data &= ~NV_BAR5_ENABLE;
+ quirk->data.flags &= ~NV_BAR5_ENABLE;
}
break;
case 0x8:
- if (quirk->data & NV_BAR5_MASTER) {
+ if (quirk->data.flags & NV_BAR5_MASTER) {
if ((data & ~0xfff) == 0x88000) {
- quirk->data |= NV_BAR5_ADDRESS;
- quirk->data2 = data & 0xfff;
+ quirk->data.flags |= NV_BAR5_ADDRESS;
+ quirk->data.address_val = data & 0xfff;
} else if ((data & ~0xff) == 0x1800) {
- quirk->data |= NV_BAR5_ADDRESS;
- quirk->data2 = data & 0xff;
+ quirk->data.flags |= NV_BAR5_ADDRESS;
+ quirk->data.address_val = data & 0xff;
} else {
- quirk->data &= ~NV_BAR5_ADDRESS;
+ quirk->data.flags &= ~NV_BAR5_ADDRESS;
}
}
break;
- case 0xc:
- if (quirk->data == NV_BAR5_VALID) {
- vfio_pci_write_config(&vdev->pdev, quirk->data2, data, size);
- DPRINTF("%s(%04x:%02x:%02x.%x:BAR5+0x%"HWADDR_PRIx", 0x%"
- PRIx64", %d)\n", __func__, vdev->host.domain,
- vdev->host.bus, vdev->host.slot, vdev->host.function,
- addr, data, size);
- return;
- }
}
- vfio_bar_write(&vdev->bars[5], addr, data, size);
+ vfio_generic_window_quirk_write(opaque, addr, data, size);
}
static const MemoryRegionOps vfio_nvidia_bar5_window_quirk = {
- .read = vfio_nvidia_bar5_window_quirk_read,
+ .read = vfio_generic_window_quirk_read,
.write = vfio_nvidia_bar5_window_quirk_write,
.valid.min_access_size = 4,
.endianness = DEVICE_LITTLE_ENDIAN,
@@ -1565,8 +1622,15 @@ static void vfio_probe_nvidia_bar5_window_quirk(VFIODevice *vdev, int nr)
quirk = g_malloc0(sizeof(*quirk));
quirk->vdev = vdev;
-
- memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_nvidia_bar5_window_quirk, quirk,
+ quirk->data.read_flags = quirk->data.write_flags = NV_BAR5_VALID;
+ quirk->data.address_offset = 0x8;
+ quirk->data.address_size = 0; /* actually 4, but avoids generic code */
+ quirk->data.data_offset = 0xc;
+ quirk->data.data_size = 4;
+ quirk->data.bar = nr;
+
+ memory_region_init_io(&quirk->mem, OBJECT(vdev),
+ &vfio_nvidia_bar5_window_quirk, quirk,
"vfio-nvidia-bar5-window-quirk", 16);
memory_region_add_subregion_overlap(&vdev->bars[nr].mem, 0, &quirk->mem, 1);
@@ -1586,51 +1650,6 @@ static void vfio_probe_nvidia_bar5_window_quirk(VFIODevice *vdev, int nr)
*
* Here's offset 0x88000...
*/
-static uint64_t vfio_nvidia_bar0_88000_quirk_read(void *opaque,
- hwaddr addr, unsigned size)
-{
- VFIOQuirk *quirk = opaque;
- VFIODevice *vdev = quirk->vdev;
- hwaddr base = 0x88000 & TARGET_PAGE_MASK;
- hwaddr offset = 0x88000 & ~TARGET_PAGE_MASK;
- uint64_t data = vfio_bar_read(&vdev->bars[0], addr + base, size);
-
- if (ranges_overlap(addr, size, offset, PCI_CONFIG_SPACE_SIZE)) {
- data = vfio_pci_read_config(&vdev->pdev, addr - offset, size);
-
- DPRINTF("%s(%04x:%02x:%02x.%x:BAR0+0x%"HWADDR_PRIx", %d) = 0x%"
- PRIx64"\n", __func__, vdev->host.domain, vdev->host.bus,
- vdev->host.slot, vdev->host.function, addr + base, size, data);
- }
-
- return data;
-}
-
-static void vfio_nvidia_bar0_88000_quirk_write(void *opaque, hwaddr addr,
- uint64_t data, unsigned size)
-{
- VFIOQuirk *quirk = opaque;
- VFIODevice *vdev = quirk->vdev;
- hwaddr base = 0x88000 & TARGET_PAGE_MASK;
- hwaddr offset = 0x88000 & ~TARGET_PAGE_MASK;
-
- if (ranges_overlap(addr, size, offset, PCI_CONFIG_SPACE_SIZE)) {
- vfio_pci_write_config(&vdev->pdev, addr - offset, data, size);
-
- DPRINTF("%s(%04x:%02x:%02x.%x:BAR0+0x%"HWADDR_PRIx", 0x%"
- PRIx64", %d)\n", __func__, vdev->host.domain, vdev->host.bus,
- vdev->host.slot, vdev->host.function, addr + base, data, size);
- } else {
- vfio_bar_write(&vdev->bars[0], addr + base, data, size);
- }
-}
-
-static const MemoryRegionOps vfio_nvidia_bar0_88000_quirk = {
- .read = vfio_nvidia_bar0_88000_quirk_read,
- .write = vfio_nvidia_bar0_88000_quirk_write,
- .endianness = DEVICE_LITTLE_ENDIAN,
-};
-
static void vfio_probe_nvidia_bar0_88000_quirk(VFIODevice *vdev, int nr)
{
PCIDevice *pdev = &vdev->pdev;
@@ -1643,13 +1662,17 @@ static void vfio_probe_nvidia_bar0_88000_quirk(VFIODevice *vdev, int nr)
quirk = g_malloc0(sizeof(*quirk));
quirk->vdev = vdev;
-
- memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_nvidia_bar0_88000_quirk, quirk,
- "vfio-nvidia-bar0-88000-quirk",
- TARGET_PAGE_ALIGN(PCIE_CONFIG_SPACE_SIZE));
+ quirk->data.flags = quirk->data.read_flags = quirk->data.write_flags = 1;
+ quirk->data.address_match = 0x88000;
+ quirk->data.address_mask = PCIE_CONFIG_SPACE_SIZE - 1;
+ quirk->data.bar = nr;
+
+ memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_generic_quirk,
+ quirk, "vfio-nvidia-bar0-88000-quirk",
+ TARGET_PAGE_ALIGN(quirk->data.address_mask + 1));
memory_region_add_subregion_overlap(&vdev->bars[nr].mem,
- 0x88000 & TARGET_PAGE_MASK,
- &quirk->mem, 1);
+ quirk->data.address_match & TARGET_PAGE_MASK,
+ &quirk->mem, 1);
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
@@ -1661,51 +1684,6 @@ static void vfio_probe_nvidia_bar0_88000_quirk(VFIODevice *vdev, int nr)
/*
* And here's the same for BAR0 offset 0x1800...
*/
-static uint64_t vfio_nvidia_bar0_1800_quirk_read(void *opaque,
- hwaddr addr, unsigned size)
-{
- VFIOQuirk *quirk = opaque;
- VFIODevice *vdev = quirk->vdev;
- hwaddr base = 0x1800 & TARGET_PAGE_MASK;
- hwaddr offset = 0x1800 & ~TARGET_PAGE_MASK;
- uint64_t data = vfio_bar_read(&vdev->bars[0], addr + base, size);
-
- if (ranges_overlap(addr, size, offset, PCI_CONFIG_SPACE_SIZE)) {
- data = vfio_pci_read_config(&vdev->pdev, addr - offset, size);
-
- DPRINTF("%s(%04x:%02x:%02x.%x:BAR0+0x%"HWADDR_PRIx", %d) = 0x%"
- PRIx64"\n", __func__, vdev->host.domain, vdev->host.bus,
- vdev->host.slot, vdev->host.function, addr + base, size, data);
- }
-
- return data;
-}
-
-static void vfio_nvidia_bar0_1800_quirk_write(void *opaque, hwaddr addr,
- uint64_t data, unsigned size)
-{
- VFIOQuirk *quirk = opaque;
- VFIODevice *vdev = quirk->vdev;
- hwaddr base = 0x1800 & TARGET_PAGE_MASK;
- hwaddr offset = 0x1800 & ~TARGET_PAGE_MASK;
-
- if (ranges_overlap(addr, size, offset, PCI_CONFIG_SPACE_SIZE)) {
- vfio_pci_write_config(&vdev->pdev, addr - offset, data, size);
-
- DPRINTF("%s(%04x:%02x:%02x.%x:BAR0+0x%"HWADDR_PRIx", 0x%"
- PRIx64", %d)\n", __func__, vdev->host.domain, vdev->host.bus,
- vdev->host.slot, vdev->host.function, addr + base, data, size);
- } else {
- vfio_bar_write(&vdev->bars[0], addr + base, data, size);
- }
-}
-
-static const MemoryRegionOps vfio_nvidia_bar0_1800_quirk = {
- .read = vfio_nvidia_bar0_1800_quirk_read,
- .write = vfio_nvidia_bar0_1800_quirk_write,
- .endianness = DEVICE_LITTLE_ENDIAN,
-};
-
static void vfio_probe_nvidia_bar0_1800_quirk(VFIODevice *vdev, int nr)
{
PCIDevice *pdev = &vdev->pdev;
@@ -1722,13 +1700,17 @@ static void vfio_probe_nvidia_bar0_1800_quirk(VFIODevice *vdev, int nr)
quirk = g_malloc0(sizeof(*quirk));
quirk->vdev = vdev;
+ quirk->data.flags = quirk->data.read_flags = quirk->data.write_flags = 1;
+ quirk->data.address_match = 0x1800;
+ quirk->data.address_mask = PCI_CONFIG_SPACE_SIZE - 1;
+ quirk->data.bar = nr;
- memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_nvidia_bar0_1800_quirk, quirk,
+ memory_region_init_io(&quirk->mem, OBJECT(vdev), &vfio_generic_quirk, quirk,
"vfio-nvidia-bar0-1800-quirk",
- TARGET_PAGE_ALIGN(PCI_CONFIG_SPACE_SIZE));
+ TARGET_PAGE_ALIGN(quirk->data.address_mask + 1));
memory_region_add_subregion_overlap(&vdev->bars[nr].mem,
- 0x1800 & TARGET_PAGE_MASK,
- &quirk->mem, 1);
+ quirk->data.address_match & TARGET_PAGE_MASK,
+ &quirk->mem, 1);
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
@@ -1768,8 +1750,8 @@ static void vfio_vga_quirk_teardown(VFIODevice *vdev)
static void vfio_bar_quirk_setup(VFIODevice *vdev, int nr)
{
- vfio_probe_ati_4010_quirk(vdev, nr);
- vfio_probe_ati_f10_quirk(vdev, nr);
+ vfio_probe_ati_bar4_window_quirk(vdev, nr);
+ vfio_probe_ati_bar2_4000_quirk(vdev, nr);
vfio_probe_nvidia_bar5_window_quirk(vdev, nr);
vfio_probe_nvidia_bar0_88000_quirk(vdev, nr);
vfio_probe_nvidia_bar0_1800_quirk(vdev, nr);
@@ -2270,11 +2252,14 @@ static void vfio_map_bar(VFIODevice *vdev, int nr)
}
pci_bar = le32_to_cpu(pci_bar);
- type = pci_bar & (pci_bar & PCI_BASE_ADDRESS_SPACE_IO ?
- ~PCI_BASE_ADDRESS_IO_MASK : ~PCI_BASE_ADDRESS_MEM_MASK);
+ bar->ioport = (pci_bar & PCI_BASE_ADDRESS_SPACE_IO);
+ bar->mem64 = bar->ioport ? 0 : (pci_bar & PCI_BASE_ADDRESS_MEM_TYPE_64);
+ type = pci_bar & (bar->ioport ? ~PCI_BASE_ADDRESS_IO_MASK :
+ ~PCI_BASE_ADDRESS_MEM_MASK);
/* A "slow" read/write mapping underlies all BARs */
- memory_region_init_io(&bar->mem, OBJECT(vdev), &vfio_bar_ops, bar, name, size);
+ memory_region_init_io(&bar->mem, OBJECT(vdev), &vfio_bar_ops,
+ bar, name, size);
pci_register_bar(&vdev->pdev, nr, type, &bar->mem);
/*
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 23:09:41 +0000