aboutsummaryrefslogtreecommitdiff
path: root/hw/ide
diff options
context:
space:
mode:
Diffstat (limited to 'hw/ide')
-rw-r--r--hw/ide/ahci.c2
-rw-r--r--hw/ide/ahci_internal.h359
-rw-r--r--hw/ide/ich.c2
3 files changed, 361 insertions, 2 deletions
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index e3cdbc81a3..406a1b5579 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -32,7 +32,7 @@
#include "sysemu/dma.h"
#include "hw/ide/internal.h"
#include "hw/ide/pci.h"
-#include "hw/ide/ahci.h"
+#include "hw/ide/ahci_internal.h"
#define DEBUG_AHCI 0
diff --git a/hw/ide/ahci_internal.h b/hw/ide/ahci_internal.h
new file mode 100644
index 0000000000..1e21169e79
--- /dev/null
+++ b/hw/ide/ahci_internal.h
@@ -0,0 +1,359 @@
+/*
+ * QEMU AHCI Emulation
+ *
+ * Copyright (c) 2010 qiaochong@loongson.cn
+ * Copyright (c) 2010 Roland Elek <elek.roland@gmail.com>
+ * Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de>
+ * Copyright (c) 2010 Alexander Graf <agraf@suse.de>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef HW_IDE_AHCI_INTERNAL_H
+#define HW_IDE_AHCI_INTERNAL_H
+
+#include "hw/ide/ahci.h"
+#include "hw/sysbus.h"
+
+#define AHCI_MEM_BAR_SIZE 0x1000
+#define AHCI_MAX_PORTS 32
+#define AHCI_MAX_SG 168 /* hardware max is 64K */
+#define AHCI_DMA_BOUNDARY 0xffffffff
+#define AHCI_USE_CLUSTERING 0
+#define AHCI_MAX_CMDS 32
+#define AHCI_CMD_SZ 32
+#define AHCI_CMD_SLOT_SZ (AHCI_MAX_CMDS * AHCI_CMD_SZ)
+#define AHCI_RX_FIS_SZ 256
+#define AHCI_CMD_TBL_CDB 0x40
+#define AHCI_CMD_TBL_HDR_SZ 0x80
+#define AHCI_CMD_TBL_SZ (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16))
+#define AHCI_CMD_TBL_AR_SZ (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS)
+#define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \
+ AHCI_RX_FIS_SZ)
+
+#define AHCI_IRQ_ON_SG (1U << 31)
+#define AHCI_CMD_ATAPI (1 << 5)
+#define AHCI_CMD_WRITE (1 << 6)
+#define AHCI_CMD_PREFETCH (1 << 7)
+#define AHCI_CMD_RESET (1 << 8)
+#define AHCI_CMD_CLR_BUSY (1 << 10)
+
+#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */
+#define RX_FIS_SDB 0x58 /* offset of SDB FIS data */
+#define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */
+
+/* global controller registers */
+#define HOST_CAP 0x00 /* host capabilities */
+#define HOST_CTL 0x04 /* global host control */
+#define HOST_IRQ_STAT 0x08 /* interrupt status */
+#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */
+#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */
+
+/* HOST_CTL bits */
+#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */
+#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */
+#define HOST_CTL_AHCI_EN (1U << 31) /* AHCI enabled */
+
+/* HOST_CAP bits */
+#define HOST_CAP_SSC (1 << 14) /* Slumber capable */
+#define HOST_CAP_AHCI (1 << 18) /* AHCI only */
+#define HOST_CAP_CLO (1 << 24) /* Command List Override support */
+#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */
+#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */
+#define HOST_CAP_64 (1U << 31) /* PCI DAC (64-bit DMA) support */
+
+/* registers for each SATA port */
+#define PORT_LST_ADDR 0x00 /* command list DMA addr */
+#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */
+#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */
+#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */
+#define PORT_IRQ_STAT 0x10 /* interrupt status */
+#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */
+#define PORT_CMD 0x18 /* port command */
+#define PORT_TFDATA 0x20 /* taskfile data */
+#define PORT_SIG 0x24 /* device TF signature */
+#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */
+#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */
+#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */
+#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */
+#define PORT_CMD_ISSUE 0x38 /* command issue */
+#define PORT_RESERVED 0x3c /* reserved */
+
+/* PORT_IRQ_{STAT,MASK} bits */
+#define PORT_IRQ_COLD_PRES (1U << 31) /* cold presence detect */
+#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */
+#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */
+#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */
+#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */
+#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */
+#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */
+#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */
+
+#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */
+#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */
+#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */
+#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */
+#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */
+#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */
+#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */
+#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */
+#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */
+
+#define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \
+ PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \
+ PORT_IRQ_UNK_FIS)
+#define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \
+ PORT_IRQ_HBUS_DATA_ERR)
+#define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \
+ PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \
+ PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS)
+
+/* PORT_CMD bits */
+#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */
+#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */
+#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */
+#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */
+#define PORT_CMD_CLO (1 << 3) /* Command list override */
+#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */
+#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */
+#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */
+
+#define PORT_CMD_ICC_MASK (0xfU << 28) /* i/f ICC state mask */
+#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */
+#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */
+#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */
+
+#define PORT_CMD_RO_MASK 0x007dffe0 /* Which CMD bits are read only? */
+
+/* ap->flags bits */
+#define AHCI_FLAG_NO_NCQ (1 << 24)
+#define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */
+#define AHCI_FLAG_HONOR_PI (1 << 26) /* honor PORTS_IMPL */
+#define AHCI_FLAG_IGN_SERR_INTERNAL (1 << 27) /* ignore SERR_INTERNAL */
+#define AHCI_FLAG_32BIT_ONLY (1 << 28) /* force 32bit */
+
+#define ATA_SRST (1 << 2) /* software reset */
+
+#define STATE_RUN 0
+#define STATE_RESET 1
+
+#define SATA_SCR_SSTATUS_DET_NODEV 0x0
+#define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3
+
+#define SATA_SCR_SSTATUS_SPD_NODEV 0x00
+#define SATA_SCR_SSTATUS_SPD_GEN1 0x10
+
+#define SATA_SCR_SSTATUS_IPM_NODEV 0x000
+#define SATA_SCR_SSTATUS_IPM_ACTIVE 0X100
+
+#define AHCI_SCR_SCTL_DET 0xf
+
+#define SATA_FIS_TYPE_REGISTER_H2D 0x27
+#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80
+#define SATA_FIS_TYPE_REGISTER_D2H 0x34
+#define SATA_FIS_TYPE_PIO_SETUP 0x5f
+#define SATA_FIS_TYPE_SDB 0xA1
+
+#define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f
+#define AHCI_CMD_HDR_PRDT_LEN 16
+
+#define SATA_SIGNATURE_CDROM 0xeb140101
+#define SATA_SIGNATURE_DISK 0x00000101
+
+#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20
+ /* Shouldn't this be 0x2c? */
+
+#define AHCI_PORT_REGS_START_ADDR 0x100
+#define AHCI_PORT_ADDR_OFFSET_MASK 0x7f
+#define AHCI_PORT_ADDR_OFFSET_LEN 0x80
+
+#define AHCI_NUM_COMMAND_SLOTS 31
+#define AHCI_SUPPORTED_SPEED 20
+#define AHCI_SUPPORTED_SPEED_GEN1 1
+#define AHCI_VERSION_1_0 0x10000
+
+#define AHCI_PROGMODE_MAJOR_REV_1 1
+
+#define AHCI_COMMAND_TABLE_ACMD 0x40
+
+#define AHCI_PRDT_SIZE_MASK 0x3fffff
+
+#define IDE_FEATURE_DMA 1
+
+#define READ_FPDMA_QUEUED 0x60
+#define WRITE_FPDMA_QUEUED 0x61
+#define NCQ_NON_DATA 0x63
+#define RECEIVE_FPDMA_QUEUED 0x65
+#define SEND_FPDMA_QUEUED 0x64
+
+#define NCQ_FIS_FUA_MASK 0x80
+#define NCQ_FIS_RARC_MASK 0x01
+
+#define RES_FIS_DSFIS 0x00
+#define RES_FIS_PSFIS 0x20
+#define RES_FIS_RFIS 0x40
+#define RES_FIS_SDBFIS 0x58
+#define RES_FIS_UFIS 0x60
+
+#define SATA_CAP_SIZE 0x8
+#define SATA_CAP_REV 0x2
+#define SATA_CAP_BAR 0x4
+
+typedef struct AHCIPortRegs {
+ uint32_t lst_addr;
+ uint32_t lst_addr_hi;
+ uint32_t fis_addr;
+ uint32_t fis_addr_hi;
+ uint32_t irq_stat;
+ uint32_t irq_mask;
+ uint32_t cmd;
+ uint32_t unused0;
+ uint32_t tfdata;
+ uint32_t sig;
+ uint32_t scr_stat;
+ uint32_t scr_ctl;
+ uint32_t scr_err;
+ uint32_t scr_act;
+ uint32_t cmd_issue;
+ uint32_t reserved;
+} AHCIPortRegs;
+
+typedef struct AHCICmdHdr {
+ uint16_t opts;
+ uint16_t prdtl;
+ uint32_t status;
+ uint64_t tbl_addr;
+ uint32_t reserved[4];
+} QEMU_PACKED AHCICmdHdr;
+
+typedef struct AHCI_SG {
+ uint64_t addr;
+ uint32_t reserved;
+ uint32_t flags_size;
+} QEMU_PACKED AHCI_SG;
+
+typedef struct NCQTransferState {
+ AHCIDevice *drive;
+ BlockAIOCB *aiocb;
+ AHCICmdHdr *cmdh;
+ QEMUSGList sglist;
+ BlockAcctCookie acct;
+ uint32_t sector_count;
+ uint64_t lba;
+ uint8_t tag;
+ uint8_t cmd;
+ uint8_t slot;
+ bool used;
+ bool halt;
+} NCQTransferState;
+
+struct AHCIDevice {
+ IDEDMA dma;
+ IDEBus port;
+ int port_no;
+ uint32_t port_state;
+ uint32_t finished;
+ AHCIPortRegs port_regs;
+ struct AHCIState *hba;
+ QEMUBH *check_bh;
+ uint8_t *lst;
+ uint8_t *res_fis;
+ bool done_atapi_packet;
+ int32_t busy_slot;
+ bool init_d2h_sent;
+ AHCICmdHdr *cur_cmd;
+ NCQTransferState ncq_tfs[AHCI_MAX_CMDS];
+};
+
+struct AHCIPCIState {
+ /*< private >*/
+ PCIDevice parent_obj;
+ /*< public >*/
+
+ AHCIState ahci;
+};
+
+#define TYPE_ICH9_AHCI "ich9-ahci"
+
+#define ICH_AHCI(obj) \
+ OBJECT_CHECK(AHCIPCIState, (obj), TYPE_ICH9_AHCI)
+
+extern const VMStateDescription vmstate_ahci;
+
+#define VMSTATE_AHCI(_field, _state) { \
+ .name = (stringify(_field)), \
+ .size = sizeof(AHCIState), \
+ .vmsd = &vmstate_ahci, \
+ .flags = VMS_STRUCT, \
+ .offset = vmstate_offset_value(_state, _field, AHCIState), \
+}
+
+/**
+ * NCQFrame is the same as a Register H2D FIS (described in SATA 3.2),
+ * but some fields have been re-mapped and re-purposed, as seen in
+ * SATA 3.2 section 13.6.4.1 ("READ FPDMA QUEUED")
+ *
+ * cmd_fis[3], feature 7:0, becomes sector count 7:0.
+ * cmd_fis[7], device 7:0, uses bit 7 as the Force Unit Access bit.
+ * cmd_fis[11], feature 15:8, becomes sector count 15:8.
+ * cmd_fis[12], count 7:0, becomes the NCQ TAG (7:3) and RARC bit (0)
+ * cmd_fis[13], count 15:8, becomes the priority value (7:6)
+ * bytes 16-19 become an le32 "auxiliary" field.
+ */
+typedef struct NCQFrame {
+ uint8_t fis_type;
+ uint8_t c;
+ uint8_t command;
+ uint8_t sector_count_low; /* (feature 7:0) */
+ uint8_t lba0;
+ uint8_t lba1;
+ uint8_t lba2;
+ uint8_t fua; /* (device 7:0) */
+ uint8_t lba3;
+ uint8_t lba4;
+ uint8_t lba5;
+ uint8_t sector_count_high; /* (feature 15:8) */
+ uint8_t tag; /* (count 0:7) */
+ uint8_t prio; /* (count 15:8) */
+ uint8_t icc;
+ uint8_t control;
+ uint8_t aux0;
+ uint8_t aux1;
+ uint8_t aux2;
+ uint8_t aux3;
+} QEMU_PACKED NCQFrame;
+
+typedef struct SDBFIS {
+ uint8_t type;
+ uint8_t flags;
+ uint8_t status;
+ uint8_t error;
+ uint32_t payload;
+} QEMU_PACKED SDBFIS;
+
+void ahci_realize(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports);
+void ahci_init(AHCIState *s, DeviceState *qdev);
+void ahci_uninit(AHCIState *s);
+
+void ahci_reset(AHCIState *s);
+
+#define TYPE_SYSBUS_AHCI "sysbus-ahci"
+#define SYSBUS_AHCI(obj) OBJECT_CHECK(SysbusAHCIState, (obj), TYPE_SYSBUS_AHCI)
+
+#define TYPE_ALLWINNER_AHCI "allwinner-ahci"
+#define ALLWINNER_AHCI(obj) OBJECT_CHECK(AllwinnerAHCIState, (obj), \
+ TYPE_ALLWINNER_AHCI)
+
+#endif /* HW_IDE_AHCI_H */
diff --git a/hw/ide/ich.c b/hw/ide/ich.c
index 989fca5e9f..9472a60cab 100644
--- a/hw/ide/ich.c
+++ b/hw/ide/ich.c
@@ -69,7 +69,7 @@
#include "sysemu/block-backend.h"
#include "sysemu/dma.h"
#include "hw/ide/pci.h"
-#include "hw/ide/ahci.h"
+#include "hw/ide/ahci_internal.h"
#define ICH9_MSI_CAP_OFFSET 0x80
#define ICH9_SATA_CAP_OFFSET 0xA8
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 22:51:11 +0000