diff options
Diffstat (limited to 'hw/i2c/pm_smbus.c')
| -rw-r--r-- | hw/i2c/pm_smbus.c | 254 |
1 files changed, 214 insertions, 40 deletions
diff --git a/hw/i2c/pm_smbus.c b/hw/i2c/pm_smbus.c index 0d26e0f6b5..685a2378ed 100644 --- a/hw/i2c/pm_smbus.c +++ b/hw/i2c/pm_smbus.c @@ -22,8 +22,6 @@ #include "hw/i2c/pm_smbus.h" #include "hw/i2c/smbus.h" -/* no save/load? */ - #define SMBHSTSTS 0x00 #define SMBHSTCNT 0x02 #define SMBHSTCMD 0x03 @@ -31,20 +29,40 @@ #define SMBHSTDAT0 0x05 #define SMBHSTDAT1 0x06 #define SMBBLKDAT 0x07 +#define SMBAUXCTL 0x0d -#define STS_HOST_BUSY (1) -#define STS_INTR (1<<1) -#define STS_DEV_ERR (1<<2) -#define STS_BUS_ERR (1<<3) -#define STS_FAILED (1<<4) -#define STS_SMBALERT (1<<5) -#define STS_INUSE_STS (1<<6) -#define STS_BYTE_DONE (1<<7) +#define STS_HOST_BUSY (1 << 0) +#define STS_INTR (1 << 1) +#define STS_DEV_ERR (1 << 2) +#define STS_BUS_ERR (1 << 3) +#define STS_FAILED (1 << 4) +#define STS_SMBALERT (1 << 5) +#define STS_INUSE_STS (1 << 6) +#define STS_BYTE_DONE (1 << 7) /* Signs of successfully transaction end : * ByteDoneStatus = 1 (STS_BYTE_DONE) and INTR = 1 (STS_INTR ) */ -//#define DEBUG +#define CTL_INTREN (1 << 0) +#define CTL_KILL (1 << 1) +#define CTL_LAST_BYTE (1 << 5) +#define CTL_START (1 << 6) +#define CTL_PEC_EN (1 << 7) +#define CTL_RETURN_MASK 0x1f + +#define PROT_QUICK 0 +#define PROT_BYTE 1 +#define PROT_BYTE_DATA 2 +#define PROT_WORD_DATA 3 +#define PROT_PROC_CALL 4 +#define PROT_BLOCK_DATA 5 +#define PROT_I2C_BLOCK_READ 6 + +#define AUX_PEC (1 << 0) +#define AUX_BLK (1 << 1) +#define AUX_MASK 0x3 + +/*#define DEBUG*/ #ifdef DEBUG # define SMBUS_DPRINTF(format, ...) printf(format, ## __VA_ARGS__) @@ -62,19 +80,17 @@ static void smb_transaction(PMSMBus *s) I2CBus *bus = s->smbus; int ret; - assert(s->smb_stat & STS_HOST_BUSY); - s->smb_stat &= ~STS_HOST_BUSY; - SMBUS_DPRINTF("SMBus trans addr=0x%02x prot=0x%02x\n", addr, prot); /* Transaction isn't exec if STS_DEV_ERR bit set */ if ((s->smb_stat & STS_DEV_ERR) != 0) { goto error; } + switch(prot) { - case 0x0: + case PROT_QUICK: ret = smbus_quick_command(bus, addr, read); goto done; - case 0x1: + case PROT_BYTE: if (read) { ret = smbus_receive_byte(bus, addr); goto data8; @@ -82,7 +98,7 @@ static void smb_transaction(PMSMBus *s) ret = smbus_send_byte(bus, addr, cmd); goto done; } - case 0x2: + case PROT_BYTE_DATA: if (read) { ret = smbus_read_byte(bus, addr, cmd); goto data8; @@ -91,22 +107,73 @@ static void smb_transaction(PMSMBus *s) goto done; } break; - case 0x3: + case PROT_WORD_DATA: if (read) { ret = smbus_read_word(bus, addr, cmd); goto data16; } else { - ret = smbus_write_word(bus, addr, cmd, (s->smb_data1 << 8) | s->smb_data0); + ret = smbus_write_word(bus, addr, cmd, + (s->smb_data1 << 8) | s->smb_data0); goto done; } break; - case 0x5: + case PROT_I2C_BLOCK_READ: if (read) { - ret = smbus_read_block(bus, addr, cmd, s->smb_data); + int xfersize = s->smb_data0; + if (xfersize > sizeof(s->smb_data)) { + xfersize = sizeof(s->smb_data); + } + ret = smbus_read_block(bus, addr, s->smb_data1, s->smb_data, + xfersize, false, true); goto data8; } else { - ret = smbus_write_block(bus, addr, cmd, s->smb_data, s->smb_data0); - goto done; + /* The manual says the behavior is undefined, just set DEV_ERR. */ + goto error; + } + break; + case PROT_BLOCK_DATA: + if (read) { + ret = smbus_read_block(bus, addr, cmd, s->smb_data, + sizeof(s->smb_data), !s->i2c_enable, + !s->i2c_enable); + if (ret < 0) { + goto error; + } + s->smb_index = 0; + s->op_done = false; + if (s->smb_auxctl & AUX_BLK) { + s->smb_stat |= STS_INTR; + } else { + s->smb_blkdata = s->smb_data[0]; + s->smb_stat |= STS_HOST_BUSY | STS_BYTE_DONE; + } + s->smb_data0 = ret; + goto out; + } else { + if (s->smb_auxctl & AUX_BLK) { + if (s->smb_index != s->smb_data0) { + s->smb_index = 0; + goto error; + } + /* Data is already all written to the queue, just do + the operation. */ + s->smb_index = 0; + ret = smbus_write_block(bus, addr, cmd, s->smb_data, + s->smb_data0, !s->i2c_enable); + if (ret < 0) { + goto error; + } + s->op_done = true; + s->smb_stat |= STS_INTR; + s->smb_stat &= ~STS_HOST_BUSY; + } else { + s->op_done = false; + s->smb_stat |= STS_HOST_BUSY | STS_BYTE_DONE; + s->smb_data[0] = s->smb_blkdata; + s->smb_index = 0; + ret = 0; + } + goto out; } break; default: @@ -128,20 +195,35 @@ done: if (ret < 0) { goto error; } - s->smb_stat |= STS_BYTE_DONE | STS_INTR; + s->smb_stat |= STS_INTR; +out: return; error: s->smb_stat |= STS_DEV_ERR; return; - } static void smb_transaction_start(PMSMBus *s) { - /* Do not execute immediately the command ; it will be - * executed when guest will read SMB_STAT register */ - s->smb_stat |= STS_HOST_BUSY; + if (s->smb_ctl & CTL_INTREN) { + smb_transaction(s); + } else { + /* Do not execute immediately the command; it will be + * executed when guest will read SMB_STAT register. This + * is to work around a bug in AMIBIOS (that is working + * around another bug in some specific hardware) where + * it waits for STS_HOST_BUSY to be set before waiting + * checking for status. If STS_HOST_BUSY doesn't get + * set, it gets stuck. */ + s->smb_stat |= STS_HOST_BUSY; + } +} + +static bool +smb_irq_value(PMSMBus *s) +{ + return ((s->smb_stat & ~STS_HOST_BUSY) != 0) && (s->smb_ctl & CTL_INTREN); } static void smb_ioport_writeb(void *opaque, hwaddr addr, uint64_t val, @@ -153,13 +235,61 @@ static void smb_ioport_writeb(void *opaque, hwaddr addr, uint64_t val, " val=0x%02" PRIx64 "\n", addr, val); switch(addr) { case SMBHSTSTS: - s->smb_stat = (~(val & 0xff)) & s->smb_stat; - s->smb_index = 0; + s->smb_stat &= ~(val & ~STS_HOST_BUSY); + if (!s->op_done && !(s->smb_auxctl & AUX_BLK)) { + uint8_t read = s->smb_addr & 0x01; + + s->smb_index++; + if (!read && s->smb_index == s->smb_data0) { + uint8_t prot = (s->smb_ctl >> 2) & 0x07; + uint8_t cmd = s->smb_cmd; + uint8_t addr = s->smb_addr >> 1; + int ret; + + if (prot == PROT_I2C_BLOCK_READ) { + s->smb_stat |= STS_DEV_ERR; + goto out; + } + + ret = smbus_write_block(s->smbus, addr, cmd, s->smb_data, + s->smb_data0, !s->i2c_enable); + if (ret < 0) { + s->smb_stat |= STS_DEV_ERR; + goto out; + } + s->op_done = true; + s->smb_stat |= STS_INTR; + s->smb_stat &= ~STS_HOST_BUSY; + } else if (!read) { + s->smb_data[s->smb_index] = s->smb_blkdata; + s->smb_stat |= STS_BYTE_DONE; + } else if (s->smb_ctl & CTL_LAST_BYTE) { + s->op_done = true; + s->smb_blkdata = s->smb_data[s->smb_index]; + s->smb_index = 0; + s->smb_stat |= STS_INTR; + s->smb_stat &= ~STS_HOST_BUSY; + } else { + s->smb_blkdata = s->smb_data[s->smb_index]; + s->smb_stat |= STS_BYTE_DONE; + } + } break; case SMBHSTCNT: - s->smb_ctl = val; - if (val & 0x40) + s->smb_ctl = val & ~CTL_START; /* CTL_START always reads 0 */ + if (val & CTL_START) { + if (!s->op_done) { + s->smb_index = 0; + s->op_done = true; + } smb_transaction_start(s); + } + if (s->smb_ctl & CTL_KILL) { + s->op_done = true; + s->smb_index = 0; + s->smb_stat |= STS_FAILED; + s->smb_stat &= ~STS_HOST_BUSY; + } break; case SMBHSTCMD: s->smb_cmd = val; @@ -174,13 +304,26 @@ static void smb_ioport_writeb(void *opaque, hwaddr addr, uint64_t val, s->smb_data1 = val; break; case SMBBLKDAT: - s->smb_data[s->smb_index++] = val; - if (s->smb_index > 31) + if (s->smb_index >= PM_SMBUS_MAX_MSG_SIZE) { s->smb_index = 0; + } + if (s->smb_auxctl & AUX_BLK) { + s->smb_data[s->smb_index++] = val; + } else { + s->smb_blkdata = val; + } + break; + case SMBAUXCTL: + s->smb_auxctl = val & AUX_MASK; break; default: break; } + + out: + if (s->set_irq) { + s->set_irq(s, smb_irq_value(s)); + } } static uint64_t smb_ioport_readb(void *opaque, hwaddr addr, unsigned width) @@ -193,12 +336,12 @@ static uint64_t smb_ioport_readb(void *opaque, hwaddr addr, unsigned width) val = s->smb_stat; if (s->smb_stat & STS_HOST_BUSY) { /* execute command now */ + s->smb_stat &= ~STS_HOST_BUSY; smb_transaction(s); } break; case SMBHSTCNT: - s->smb_index = 0; - val = s->smb_ctl & 0x1f; + val = s->smb_ctl & CTL_RETURN_MASK; break; case SMBHSTCMD: val = s->smb_cmd; @@ -213,18 +356,44 @@ static uint64_t smb_ioport_readb(void *opaque, hwaddr addr, unsigned width) val = s->smb_data1; break; case SMBBLKDAT: - val = s->smb_data[s->smb_index++]; - if (s->smb_index > 31) + if (s->smb_index >= PM_SMBUS_MAX_MSG_SIZE) { s->smb_index = 0; + } + if (s->smb_auxctl & AUX_BLK) { + val = s->smb_data[s->smb_index++]; + if (!s->op_done && s->smb_index == s->smb_data0) { + s->op_done = true; + s->smb_index = 0; + s->smb_stat &= ~STS_HOST_BUSY; + } + } else { + val = s->smb_blkdata; + } + break; + case SMBAUXCTL: + val = s->smb_auxctl; break; default: val = 0; break; } - SMBUS_DPRINTF("SMB readb port=0x%04" HWADDR_PRIx " val=0x%02x\n", addr, val); + SMBUS_DPRINTF("SMB readb port=0x%04" HWADDR_PRIx " val=0x%02x\n", + addr, val); + + if (s->set_irq) { + s->set_irq(s, smb_irq_value(s)); + } + return val; } +static void pm_smbus_reset(PMSMBus *s) +{ + s->op_done = true; + s->smb_index = 0; + s->smb_stat = 0; +} + static const MemoryRegionOps pm_smbus_ops = { .read = smb_ioport_readb, .write = smb_ioport_writeb, @@ -233,9 +402,14 @@ static const MemoryRegionOps pm_smbus_ops = { .endianness = DEVICE_LITTLE_ENDIAN, }; -void pm_smbus_init(DeviceState *parent, PMSMBus *smb) +void pm_smbus_init(DeviceState *parent, PMSMBus *smb, bool force_aux_blk) { + smb->op_done = true; + smb->reset = pm_smbus_reset; smb->smbus = i2c_init_bus(parent, "i2c"); + if (force_aux_blk) { + smb->smb_auxctl |= AUX_BLK; + } memory_region_init_io(&smb->io, OBJECT(parent), &pm_smbus_ops, smb, "pm-smbus", 64); } |