diff options
Diffstat (limited to 'hw/highbank.c')
| -rw-r--r-- | hw/highbank.c | 330 |
1 files changed, 330 insertions, 0 deletions
diff --git a/hw/highbank.c b/hw/highbank.c new file mode 100644 index 0000000000..136297ca7d --- /dev/null +++ b/hw/highbank.c @@ -0,0 +1,330 @@ +/* + * Calxeda Highbank SoC emulation + * + * Copyright (c) 2010-2012 Calxeda + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#include "sysbus.h" +#include "arm-misc.h" +#include "primecell.h" +#include "devices.h" +#include "loader.h" +#include "net.h" +#include "sysemu.h" +#include "boards.h" +#include "sysbus.h" +#include "blockdev.h" +#include "exec-memory.h" + +#define SMP_BOOT_ADDR 0x100 +#define SMP_BOOT_REG 0x40 +#define GIC_BASE_ADDR 0xfff10000 + +#define NIRQ_GIC 160 + +/* Board init. */ +static void highbank_cpu_reset(void *opaque) +{ + CPUState *env = opaque; + + env->cp15.c15_config_base_address = GIC_BASE_ADDR; +} + +static void hb_write_secondary(CPUState *env, const struct arm_boot_info *info) +{ + int n; + uint32_t smpboot[] = { + 0xee100fb0, /* mrc p15, 0, r0, c0, c0, 5 - read current core id */ + 0xe210000f, /* ands r0, r0, #0x0f */ + 0xe3a03040, /* mov r3, #0x40 - jump address is 0x40 + 0x10 * core id */ + 0xe0830200, /* add r0, r3, r0, lsl #4 */ + 0xe59f2018, /* ldr r2, privbase */ + 0xe3a01001, /* mov r1, #1 */ + 0xe5821100, /* str r1, [r2, #256] */ + 0xe320f003, /* wfi */ + 0xe5901000, /* ldr r1, [r0] */ + 0xe1110001, /* tst r1, r1 */ + 0x0afffffb, /* beq <wfi> */ + 0xe12fff11, /* bx r1 */ + GIC_BASE_ADDR /* privbase: gic address. */ + }; + for (n = 0; n < ARRAY_SIZE(smpboot); n++) { + smpboot[n] = tswap32(smpboot[n]); + } + rom_add_blob_fixed("smpboot", smpboot, sizeof(smpboot), SMP_BOOT_ADDR); +} + +static void hb_reset_secondary(CPUState *env, const struct arm_boot_info *info) +{ + switch (info->nb_cpus) { + case 4: + stl_phys_notdirty(SMP_BOOT_REG + 0x30, 0); + case 3: + stl_phys_notdirty(SMP_BOOT_REG + 0x20, 0); + case 2: + stl_phys_notdirty(SMP_BOOT_REG + 0x10, 0); + env->regs[15] = SMP_BOOT_ADDR; + break; + default: + break; + } +} + +#define NUM_REGS 0x200 +static void hb_regs_write(void *opaque, target_phys_addr_t offset, + uint64_t value, unsigned size) +{ + uint32_t *regs = opaque; + + if (offset == 0xf00) { + if (value == 1 || value == 2) { + qemu_system_reset_request(); + } else if (value == 3) { + qemu_system_shutdown_request(); + } + } + + regs[offset/4] = value; +} + +static uint64_t hb_regs_read(void *opaque, target_phys_addr_t offset, + unsigned size) +{ + uint32_t *regs = opaque; + uint32_t value = regs[offset/4]; + + if ((offset == 0x100) || (offset == 0x108) || (offset == 0x10C)) { + value |= 0x30000000; + } + + return value; +} + +static const MemoryRegionOps hb_mem_ops = { + .read = hb_regs_read, + .write = hb_regs_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +typedef struct { + SysBusDevice busdev; + MemoryRegion *iomem; + uint32_t regs[NUM_REGS]; +} HighbankRegsState; + +static VMStateDescription vmstate_highbank_regs = { + .name = "highbank-regs", + .version_id = 0, + .minimum_version_id = 0, + .minimum_version_id_old = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, HighbankRegsState, NUM_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + +static void highbank_regs_reset(DeviceState *dev) +{ + SysBusDevice *sys_dev = sysbus_from_qdev(dev); + HighbankRegsState *s = FROM_SYSBUS(HighbankRegsState, sys_dev); + + s->regs[0x40] = 0x05F20121; + s->regs[0x41] = 0x2; + s->regs[0x42] = 0x05F30121; + s->regs[0x43] = 0x05F40121; +} + +static int highbank_regs_init(SysBusDevice *dev) +{ + HighbankRegsState *s = FROM_SYSBUS(HighbankRegsState, dev); + + s->iomem = g_new(MemoryRegion, 1); + memory_region_init_io(s->iomem, &hb_mem_ops, s->regs, "highbank_regs", + 0x1000); + sysbus_init_mmio(dev, s->iomem); + + return 0; +} + +static SysBusDeviceInfo highbank_regs_info = { + .init = highbank_regs_init, + .qdev.name = "highbank-regs", + .qdev.desc = "Calxeda Highbank registers", + .qdev.size = sizeof(HighbankRegsState), + .qdev.vmsd = &vmstate_highbank_regs, + .qdev.reset = highbank_regs_reset, +}; + +static void highbank_regs_register_device(void) +{ + sysbus_register_withprop(&highbank_regs_info); +} + +device_init(highbank_regs_register_device) + +static struct arm_boot_info highbank_binfo; + +/* ram_size must be set to match the upper bound of memory in the + * device tree (linux/arch/arm/boot/dts/highbank.dts), which is + * normally 0xff900000 or -m 4089. When running this board on a + * 32-bit host, set the reg value of memory to 0xf7ff00000 in the + * device tree and pass -m 2047 to QEMU. + */ +static void highbank_init(ram_addr_t ram_size, + const char *boot_device, + const char *kernel_filename, const char *kernel_cmdline, + const char *initrd_filename, const char *cpu_model) +{ + CPUState *env = NULL; + DeviceState *dev; + SysBusDevice *busdev; + qemu_irq *irqp; + qemu_irq pic[128]; + int n; + qemu_irq cpu_irq[4]; + MemoryRegion *sysram; + MemoryRegion *dram; + MemoryRegion *sysmem; + char *sysboot_filename; + + if (!cpu_model) { + cpu_model = "cortex-a9"; + } + + for (n = 0; n < smp_cpus; n++) { + env = cpu_init(cpu_model); + if (!env) { + fprintf(stderr, "Unable to find CPU definition\n"); + exit(1); + } + irqp = arm_pic_init_cpu(env); + cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ]; + qemu_register_reset(highbank_cpu_reset, env); + } + + sysmem = get_system_memory(); + dram = g_new(MemoryRegion, 1); + memory_region_init_ram(dram, "highbank.dram", ram_size); + /* SDRAM at address zero. */ + memory_region_add_subregion(sysmem, 0, dram); + + sysram = g_new(MemoryRegion, 1); + memory_region_init_ram(sysram, "highbank.sysram", 0x8000); + memory_region_add_subregion(sysmem, 0xfff88000, sysram); + if (bios_name != NULL) { + sysboot_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); + if (sysboot_filename != NULL) { + uint32_t filesize = get_image_size(sysboot_filename); + if (load_image_targphys("sysram.bin", 0xfff88000, filesize) < 0) { + hw_error("Unable to load %s\n", bios_name); + } + } else { + hw_error("Unable to find %s\n", bios_name); + } + } + + dev = qdev_create(NULL, "a9mpcore_priv"); + qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); + qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC); + qdev_init_nofail(dev); + busdev = sysbus_from_qdev(dev); + sysbus_mmio_map(busdev, 0, GIC_BASE_ADDR); + for (n = 0; n < smp_cpus; n++) { + sysbus_connect_irq(busdev, n, cpu_irq[n]); + } + + for (n = 0; n < 128; n++) { + pic[n] = qdev_get_gpio_in(dev, n); + } + + dev = qdev_create(NULL, "l2x0"); + qdev_init_nofail(dev); + busdev = sysbus_from_qdev(dev); + sysbus_mmio_map(busdev, 0, 0xfff12000); + + dev = qdev_create(NULL, "sp804"); + qdev_prop_set_uint32(dev, "freq0", 150000000); + qdev_prop_set_uint32(dev, "freq1", 150000000); + qdev_init_nofail(dev); + busdev = sysbus_from_qdev(dev); + sysbus_mmio_map(busdev, 0, 0xfff34000); + sysbus_connect_irq(busdev, 0, pic[18]); + sysbus_create_simple("pl011", 0xfff36000, pic[20]); + + dev = qdev_create(NULL, "highbank-regs"); + qdev_init_nofail(dev); + busdev = sysbus_from_qdev(dev); + sysbus_mmio_map(busdev, 0, 0xfff3c000); + + sysbus_create_simple("pl061", 0xfff30000, pic[14]); + sysbus_create_simple("pl061", 0xfff31000, pic[15]); + sysbus_create_simple("pl061", 0xfff32000, pic[16]); + sysbus_create_simple("pl061", 0xfff33000, pic[17]); + sysbus_create_simple("pl031", 0xfff35000, pic[19]); + sysbus_create_simple("pl022", 0xfff39000, pic[23]); + + sysbus_create_simple("sysbus-ahci", 0xffe08000, pic[83]); + + if (nd_table[0].vlan) { + qemu_check_nic_model(&nd_table[0], "xgmac"); + dev = qdev_create(NULL, "xgmac"); + qdev_set_nic_properties(dev, &nd_table[0]); + qdev_init_nofail(dev); + sysbus_mmio_map(sysbus_from_qdev(dev), 0, 0xfff50000); + sysbus_connect_irq(sysbus_from_qdev(dev), 0, pic[77]); + sysbus_connect_irq(sysbus_from_qdev(dev), 1, pic[78]); + sysbus_connect_irq(sysbus_from_qdev(dev), 2, pic[79]); + + qemu_check_nic_model(&nd_table[1], "xgmac"); + dev = qdev_create(NULL, "xgmac"); + qdev_set_nic_properties(dev, &nd_table[1]); + qdev_init_nofail(dev); + sysbus_mmio_map(sysbus_from_qdev(dev), 0, 0xfff51000); + sysbus_connect_irq(sysbus_from_qdev(dev), 0, pic[80]); + sysbus_connect_irq(sysbus_from_qdev(dev), 1, pic[81]); + sysbus_connect_irq(sysbus_from_qdev(dev), 2, pic[82]); + } + + highbank_binfo.ram_size = ram_size; + highbank_binfo.kernel_filename = kernel_filename; + highbank_binfo.kernel_cmdline = kernel_cmdline; + highbank_binfo.initrd_filename = initrd_filename; + /* highbank requires a dtb in order to boot, and the dtb will override + * the board ID. The following value is ignored, so set it to -1 to be + * clear that the value is meaningless. + */ + highbank_binfo.board_id = -1; + highbank_binfo.nb_cpus = smp_cpus; + highbank_binfo.loader_start = 0; + highbank_binfo.write_secondary_boot = hb_write_secondary; + highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary; + arm_load_kernel(first_cpu, &highbank_binfo); +} + +static QEMUMachine highbank_machine = { + .name = "highbank", + .desc = "Calxeda Highbank (ECX-1000)", + .init = highbank_init, + .use_scsi = 1, + .max_cpus = 4, +}; + +static void highbank_machine_init(void) +{ + qemu_register_machine(&highbank_machine); +} + +machine_init(highbank_machine_init); |