diff options
Diffstat (limited to 'hw/eepro100.c')
| -rw-r--r-- | hw/eepro100.c | 94 |
1 files changed, 32 insertions, 62 deletions
diff --git a/hw/eepro100.c b/hw/eepro100.c index 45ab497cab..7db6fb5a70 100644 --- a/hw/eepro100.c +++ b/hw/eepro100.c @@ -48,15 +48,6 @@ #include "net.h" #include "eeprom93xx.h" -/* Common declarations for all PCI devices. */ - -#define PCI_CONFIG_8(offset, value) \ - (pci_conf[offset] = (value)) -#define PCI_CONFIG_16(offset, value) \ - (*(uint16_t *)&pci_conf[offset] = cpu_to_le16(value)) -#define PCI_CONFIG_32(offset, value) \ - (*(uint32_t *)&pci_conf[offset] = cpu_to_le32(value)) - #define KiB 1024 /* Debug EEPRO100 card. */ @@ -467,49 +458,28 @@ static void pci_reset(EEPRO100State * s) /* PCI Vendor ID */ pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL); /* PCI Device ID depends on device and is set below. */ - /* PCI Command */ - /* TODO: this is the default, do not override. */ - PCI_CONFIG_16(PCI_COMMAND, 0x0000); /* PCI Status */ - /* TODO: Value at RST# should be 0. */ - PCI_CONFIG_16(PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_FAST_BACK); + pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_FAST_BACK); /* PCI Revision ID */ - PCI_CONFIG_8(PCI_REVISION_ID, 0x08); - /* TODO: this is the default, do not override. */ - /* PCI Class Code */ - PCI_CONFIG_8(PCI_CLASS_PROG, 0x00); + pci_set_byte(pci_conf + PCI_REVISION_ID, 0x08); pci_config_set_class(pci_conf, PCI_CLASS_NETWORK_ETHERNET); - /* PCI Cache Line Size */ - /* check cache line size!!! */ -#if 0 - PCI_CONFIG_8(0x0c, 0x00); -#endif /* PCI Latency Timer */ - PCI_CONFIG_8(PCI_LATENCY_TIMER, 0x20); /* latency timer = 32 clocks */ - /* PCI Header Type */ - /* BIST (built-in self test) */ - /* Expansion ROM Base Address (depends on boot disable!!!) */ - /* TODO: not needed, set when BAR is registered */ - PCI_CONFIG_32(PCI_ROM_ADDRESS, PCI_BASE_ADDRESS_SPACE_MEMORY); + pci_set_byte(pci_conf + PCI_LATENCY_TIMER, 0x20); /* latency timer = 32 clocks */ /* Capability Pointer */ /* TODO: revisions with power_management 1 use this but * do not set new capability list bit in status register. */ - PCI_CONFIG_8(PCI_CAPABILITY_LIST, 0xdc); - /* Interrupt Line */ - /* Interrupt Pin */ - /* TODO: RST# value should be 0 */ - PCI_CONFIG_8(PCI_INTERRUPT_PIN, 1); /* interrupt pin 0 */ + pci_set_byte(pci_conf + PCI_CAPABILITY_LIST, 0xdc); /* Minimum Grant */ - PCI_CONFIG_8(PCI_MIN_GNT, 0x08); + pci_set_byte(pci_conf + PCI_MIN_GNT, 0x08); /* Maximum Latency */ - PCI_CONFIG_8(PCI_MAX_LAT, 0x18); + pci_set_byte(pci_conf + PCI_MAX_LAT, 0x18); switch (device) { case i82550: /* TODO: check device id. */ pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82551IT); /* Revision ID: 0x0c, 0x0d, 0x0e. */ - PCI_CONFIG_8(PCI_REVISION_ID, 0x0e); + pci_set_byte(pci_conf + PCI_REVISION_ID, 0x0e); /* TODO: check size of statistical counters. */ s->stats_size = 80; /* TODO: check extended tcb support. */ @@ -518,80 +488,80 @@ static void pci_reset(EEPRO100State * s) case i82551: pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82551IT); /* Revision ID: 0x0f, 0x10. */ - PCI_CONFIG_8(PCI_REVISION_ID, 0x0f); + pci_set_byte(pci_conf + PCI_REVISION_ID, 0x0f); /* TODO: check size of statistical counters. */ s->stats_size = 80; s->has_extended_tcb_support = 1; break; case i82557A: pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557); - PCI_CONFIG_8(PCI_REVISION_ID, 0x01); - PCI_CONFIG_8(PCI_CAPABILITY_LIST, 0x00); + pci_set_byte(pci_conf + PCI_REVISION_ID, 0x01); + pci_set_byte(pci_conf + PCI_CAPABILITY_LIST, 0x00); power_management = 0; break; case i82557B: pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557); - PCI_CONFIG_8(PCI_REVISION_ID, 0x02); - PCI_CONFIG_8(PCI_CAPABILITY_LIST, 0x00); + pci_set_byte(pci_conf + PCI_REVISION_ID, 0x02); + pci_set_byte(pci_conf + PCI_CAPABILITY_LIST, 0x00); power_management = 0; break; case i82557C: pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557); - PCI_CONFIG_8(PCI_REVISION_ID, 0x03); - PCI_CONFIG_8(PCI_CAPABILITY_LIST, 0x00); + pci_set_byte(pci_conf + PCI_REVISION_ID, 0x03); + pci_set_byte(pci_conf + PCI_CAPABILITY_LIST, 0x00); power_management = 0; break; case i82558A: pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557); - PCI_CONFIG_16(PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | + pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_FAST_BACK | PCI_STATUS_CAP_LIST); - PCI_CONFIG_8(PCI_REVISION_ID, 0x04); + pci_set_byte(pci_conf + PCI_REVISION_ID, 0x04); s->stats_size = 76; s->has_extended_tcb_support = 1; break; case i82558B: pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557); - PCI_CONFIG_16(PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | + pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_FAST_BACK | PCI_STATUS_CAP_LIST); - PCI_CONFIG_8(PCI_REVISION_ID, 0x05); + pci_set_byte(pci_conf + PCI_REVISION_ID, 0x05); s->stats_size = 76; s->has_extended_tcb_support = 1; break; case i82559A: pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557); - PCI_CONFIG_16(PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | + pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_FAST_BACK | PCI_STATUS_CAP_LIST); - PCI_CONFIG_8(PCI_REVISION_ID, 0x06); + pci_set_byte(pci_conf + PCI_REVISION_ID, 0x06); s->stats_size = 80; s->has_extended_tcb_support = 1; break; case i82559B: pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557); - PCI_CONFIG_16(PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | + pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_FAST_BACK | PCI_STATUS_CAP_LIST); - PCI_CONFIG_8(PCI_REVISION_ID, 0x07); + pci_set_byte(pci_conf + PCI_REVISION_ID, 0x07); s->stats_size = 80; s->has_extended_tcb_support = 1; break; case i82559C: pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82557); - PCI_CONFIG_16(PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | + pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_FAST_BACK | PCI_STATUS_CAP_LIST); - PCI_CONFIG_8(PCI_REVISION_ID, 0x08); + pci_set_byte(pci_conf + PCI_REVISION_ID, 0x08); /* TODO: Windows wants revision id 0x0c. */ - PCI_CONFIG_8(PCI_REVISION_ID, 0x0c); + pci_set_byte(pci_conf + PCI_REVISION_ID, 0x0c); #if EEPROM_SIZE > 0 - PCI_CONFIG_16(PCI_SUBSYSTEM_VENDOR_ID, 0x8086); - PCI_CONFIG_16(PCI_SUBSYSTEM_ID, 0x0040); + pci_set_word(pci_conf + PCI_SUBSYSTEM_VENDOR_ID, 0x8086); + pci_set_word(pci_conf + PCI_SUBSYSTEM_ID, 0x0040); #endif s->stats_size = 80; s->has_extended_tcb_support = 1; break; case i82559ER: pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82551IT); - PCI_CONFIG_16(PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | + pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_FAST_BACK | PCI_STATUS_CAP_LIST); - PCI_CONFIG_8(PCI_REVISION_ID, 0x09); + pci_set_byte(pci_conf + PCI_REVISION_ID, 0x09); s->stats_size = 80; s->has_extended_tcb_support = 1; break; @@ -599,7 +569,7 @@ static void pci_reset(EEPRO100State * s) /* TODO: check device id. */ pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82551IT); /* TODO: wrong revision id. */ - PCI_CONFIG_8(PCI_REVISION_ID, 0x0e); + pci_set_byte(pci_conf + PCI_REVISION_ID, 0x0e); s->stats_size = 80; s->has_extended_tcb_support = 1; break; @@ -633,10 +603,10 @@ static void pci_reset(EEPRO100State * s) if (power_management) { /* Power Management Capabilities */ - PCI_CONFIG_8(0xdc, 0x01); + pci_set_byte(pci_conf + 0xdc, 0x01); /* Next Item Pointer */ /* Capability ID */ - PCI_CONFIG_16(0xde, 0x7e21); + pci_set_word(pci_conf + 0xde, 0x7e21); /* TODO: Power Management Control / Status. */ /* TODO: Ethernet Power Consumption Registers (i82559 and later). */ } |